0% found this document useful (0 votes)

3K views211 pages

Lifting Gears Catalogue

Titan Catalogue for Lifting Gears

Uploaded by

arsalan ahmad

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

3K views211 pages

Lifting Gears Catalogue

Titan Catalogue for Lifting Gears

Uploaded by

arsalan ahmad

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

2014 / 2015 CATALOGUE

[Link]
We are proud to stand behind quality products
from these leading manufacturers:

The Caldwell Group

A WireCo® WorldGroup Brand

[Link]
TABLE OF CONTENTS

Slings - 1
Fittings - 29
Hoisting Equipment - 51
Wire Rope - 70
Crane Components - 77
Inspections & Recertification - 96

Blades & Edges - 109

Teeth & Adapters - 140
Plates & Attachments - 154
Sweeper Parts - 163

Cargo Control - 173

Tire Chains - 183

[Link]
WE’RE HERE TO HELP
For over 45 years, Titan has supplied industry with quality parts
that customers rely on to get their jobs done safe and efficiently.
Titan is headquartered in Edmonton, Alberta and serves
customers across Canada and the US.

We’re open from 7:30AM to 6PM MST.

Email: sales@[Link]

LOCATIONS:
HEAD OFFICE & EDMONTON BRANCH: CALGARY BRANCH:
5303-75 Street 4155-75 Avenue SE
Edmonton, AB Calgary, AB
T6E 5S5 Canada T2C 2K8 Canada

Phone: 780-481-1122 Phone: 403-236-1262

Fax: 780-481-1503 Fax: 403-236-5200

GRANDE PRAIRIE BRANCH: RED DEER BRANCH:

112, 6901-98 Street Bay 3, 8068 Edgar Industrial Crescent
Clairmont, AB Red Deer, AB
T0H 0W0 Canada T4P 3E3 Canada

Phone: 780-539-7316 Phone: 403-340-3620

Fax: 780-538-1844 Fax: 403-340-8370

UNITED STATES:
Long Beach, CA
562-714-4541

[Link]
[Link]
SLINGS
WIRE ROPE SLINGS

Wire Rope Slings

- All wire rope used meets API specifications
- Flemish splice high efficiency eyes
- XIP strength increases capacity
- Customized to specifications
- Manufactured in accordance with
ASME B30.9 standards
- All Titan Supply slings are manufactured using Crosby sleeves

See wire rope technical data page Follow OSHA, ANSI B30.9 and
For inspection & removal criteria Manufacturerʼs Guidelines.
Can fail if damaged, misused or overloaded.
Inspect before use.
Use only if trained. Do not exceed rated capacity.
Proudly made in Protect sling from contact with edges.
Canada DEATH or INJURY can occur from improper use
or maintenance.

WIRE STD. EYE XIP APPROX. WIRE STD. EYE XIP APPROX.
ROPE SIZE SIZE VERTICAL CHOKER BASKET WEIGHT ROPE SIZE SIZE VERTICAL CHOKER BASKET WEIGHT
(in.) (in.) (lbs./ft.) (in.) (in.) (lbs./ft.)

1/4 4 1300 975 2600 0.1 2 32 74000 55500 148000 7.4

5/16 6 2000 1500 4000 0.2 2 1/8 36 80000 62000 160000 8.4
3/8 6 2800 2100 5600 0.3 2 1/4 36 88000 66000 176000 9.4
7/16 8 3800 2850 7600 0.4 2 3/8 40 98000 76000 196000 11.6
1/2 8 5000 3750 10000 0.5 2 1/2 40 108000 81000 216000 14.0
9/16 10 6400 4800 12800 0.6 2 5/8 44 120000 92000 240000 14.6
5/8 10 7800 5800 15600 0.8 2 3/4 44 130000 102000 260000 15.3
3/4 12 11200 8200 22400 1.1 2 7/8 48 142000 110000 284000 15.9
7/8 14 15200 11400 30400 1.5 3 48 154000 120000 308000 16.6
1 16 19600 14700 39200 1.9 3 1/8 64 164000 128000 328000 18.1
1 1/8 18 24000 18000 48000 2.5 3 1/4 64 178000 138000 356000 19.5
1 1/4 20 30000 22500 60000 3.0 3 3/8 72 190000 148000 380000 21.1
1 3/8 22 36000 27000 72000 3.7 3 1/2 72 204000 158000 480000 22.7
1 1/2 24 42000 31500 84000 4.4 3 3/4 80 230000 172500 460000 25.2
1 5/8 26 48000 36000 96000 5.0 4 90 260000 195000 520000 28.9
1 3/4 28 56000 42000 112000 5.7 5:1 Design Factor Working Load Limit in Pounds

Standard Options

Standard Thimble Thimble Thimble Thimble Hand Safety

Eye Eye Eye Ring Eye Sling Eye Safety Splice Splice
Hook Hook

TITAN 2014 / 2015 CATALOGUE 1

SLINGS
WIRE ROPE SLINGS

Wire Rope Slings

2 Leg Bridle ROPE
Capacities (tons)
(Horizontal Angle)*
Alloy Oblong
Master Link
Eye
Hook
Minimum
Sling

Dia. 60° 45° 30° Dia. (tons) Length

Wire Rope Sling 1/4 1.1 0.92 0.65 1/2 3/4-A 1’3”
- Constructed of 6x19 or 6x36 XIP IWRC Wire Rope
3/8 2.5 2 1.4 1/2 1-1/2-A 1’8”
1/2 4.4 3.6 2.5 3/4 3-A 2’
5/8 6.8 5.5 3.9 1 5-A 2’4”
3/4 9.7 7.9 5.6 1 7-A 2’9”
7/8 13 11 7.6 1 1/4 11-A 3’3”
1 17 14 9.8 1 1/2 11-A 3’6”
1 1/8 21 17 12 1 1/2 15-A 4’
1 1/4 26 21 15 1 3/4 15-A 4’6”
1 3/8 31 25 18 1 3/4 22-A 5’
1 1/2 37 30 21 2 22-A 5’6”
1 3/4 49 40 28 2 1/4 30-A 6’6”
2 63 52 37 2 1/2 37-A 8’
2 1/4 77 63 44 2 3/4 45-A 8’9”
* Horizontal sling angles less than 30 degrees shall not be used.

3 Leg Bridle ROPE

Capacities (tons)
(Horizontal Angle)*
Alloy Oblong
Master Link
Eye
Hook
Minimum
Sling

Dia. 60° 45° 30° Dia. (tons) Length

Wire Rope Sling 1/4 1.7 1.4 0.97 1/2 3/4-A 1’3’
- Constructed of 6x19 or 6x36 XIP IWRC Wire Rope
3/8 3.7 3 2.2 3/4 1-1/2-A 1’8’
1/2 6.6 5.4 3.8 1 3-A 2’
5/8 10 8.3 5.9 1 1/4 5-A 2’4’
3/4 15 12 8.4 1 1/4 7-A 2’9’
7/8 20 16 11 1 1/2 11-A 3’3’
1 26 21 15 1 3/4 11-A 3’6’
1 1/8 31 26 18 1 3/4 15-A 4’
1 1/4 38 31 22 2 15-A 4’6’
1 3/8 46 38 27 2 22-A 5’
1 1/2 55 45 32 2 1/4 22-A 5’6’
1 3/4 74 60 42 2 3/4 30-A 6’6’
2 95 78 55 3 1/4 37-A 8’
2 1/4 116 94 67 3 3/4 45-A 8’9’
* Horizontal sling angles less than 30 degrees shall not be used.

4 Leg Bridle ROPE

Capacities (tons)
(Horizontal Angle)*
Alloy Oblong
Master Link
Eye
Hook
Minimum
Sling

Dia. 60° 45° 30° Dia. (tons) Length

Wire Rope Sling 1/4 2.2 1.8 1.3 3/4 3/4A 1’3’
- Constructed of 6x19 or 6x36 XIP IWRC Wire Rope
3/8 5 4.1 2.9 3/4 1-1/2A 1’8’
1/2 8.8 7.1 5.1 1 3-A 2’
5/8 14 11 7.8 1 1/4 5-A 2’4’
3/4 19 16 11 1 1/2 7-A 2’9’
7/8 26 21 15 1 3/4 11-A 3’3’
1 34 28 20 2 11-A 3’6’
1 1/8 42 34 24 2 15-A 4’
1 1/4 51 42 30 2 1/4 15-A 4’6’
1 3/8 62 50 36 (Pear Link) 2 3/4 22-A 5’
1 1/2 73 60 42 (Pear Link) 2 3/4 22-A 5’6’
1 3/4 98 80 57 (Pear Link) 2 3/4 30-A 6’6’
2 127 104 73 (Pear Link) 3 1/4 37-A 8’
* Horizontal sling angles less than 30 degrees shall not be used.

Rated capacities for 3& 4 leg bridles assume a balanced load with weight equally distributed among each of the legs. In practice, this may not occur
and one or more legs may carry a disproportionate share of the load. If this condition is likely to occur, a larger sling diameter may be required.

2 TITAN 2014 / 2015 CATALOGUE

SLINGS
WIRE ROPE SLINGS

Gator-Flex® Wire Rope Slings Component

Wire Rope
Standard
Eye Size
Finished
Diameter
Vertical
Rated
Capacity
Choker
Rated
Capacity
Basket
Rated
Capacity
Weight
Per Ft.
Minimum
Length
Gator-Flex®
This sling has a nine-part body style with wires in the eyes
(Tons) (Tons) (Tons) (Lbs.)
that are crossed or interwoven so no wrapping is necessary.
The sling was developed in conjunction with offshore oil 7/16” 22” 1 3/4” 13.8 10.3 27.6 3.15 15’
company riggers who preferred a sling for heavy lifts that 1/2” 24” 2” 18.0 13.5 36.0 4.14 15’
could be visually inspected and have the highest flexibility 9/16” 26” 2 1/4” 22.7 18.1 45.4 5.31 20’
possible in a multi-part wire rope sling. The eyes are 5/8” 28” 2 1/2” 27.8 20.8 55.6 6.48 20’
terminated in a hand-tuck-type of construction. 3/4” 30” 3” 39.7 29.8 79.4 9.36 20’
7/8” 35” 3 1/2” 53.7 40.3 107.4 12.78 25’
1” 40” 4” 69.8 52.3 139.6 16.65 28’
1-1/8” 45” 4 1/2” 87.7 65.8 175.4 21.06 33’
1-1/4” 50” 5” 108.8 81.0 216.0 26.01 38’
1-3/8” 55” 5 1/2” 130.0 97.5 260.0 31.50 40’
1-1/2” 60” 6” 154.0 115.5 308.0 37.44 45’
1-3/4” 70” 7” 206.0 154.5 412.0 51.03 51’
2” 80” 8” 267.0 200.2 534.0 66.51 58’
2-1/4” 90” 9” 3330 249.7 666.0 84.24 65’
2-1/2” 100” 10” 408.0 306.0 816.0 104.00 72’

NOTE: Vertical rated capacity is based on 5:1 Design Factor, EIP, IWRC or GAC.
Bending radius of the sling body is 5:1 where D is the Pin or Load and d is the sling body.
D/d of loops: 1:1 where D is the pin and d is the sling body diameter.

Gator-Flex® Grommets GATOR-FLEX® GROMMETS (D/d = 5:1) Rated Capacity at 5:1 DF

Tons (2000 lbs.)
Pin Size 5 x FD 9 Pts. Wire Weight
These slings are endless for that short heavy lift connection. Finished Dia. Rope Size Vertical Choker Basket Vertical Per Ft. /Lbs.
These slings can be made shorter than multi-part slings,
but maintain all of the advantages. They are the most flexible 1” 1/4” 8.5 6.3 17.0 2
grommets in the world. 1-1/4” 5/16” 13.2 9.9 26.4 3
1-1/2” 3/8” 19.0 14.2 38.0 5
1-3/4” 7/16” 25.7 19.2 51.4 6
2” 1/2” 33.5 25.1 67.0 8
2 1/4” 9/16” 42.3 31.7 84.6 11
2-1/2” 5/8” 51.9 38.9 103.8 13
3” 3/4” 74.0 55.5 148.0 19
3-1/2” 7/8” 100.3 75.2 200.6 25
4” 1” 130.9 98.1 261.8 33
4-1/2” 1-1/8” 163.8 122.8 327.6 42
5” 1-1/4” 201.3 150.9 402.6 52
5-1/2” 1-3/8” 241.9 181.4 483.8 63
6” 1-1/2” 287.2 215.4 574.4 75
7” 1-3/4” 385.5 289.1 771.0 102
8” 2” 499.0 374.2 998.0 133
9” 2-1/4” 622.4 466.8 1244.8 168
10” 2-1/2” 761.0 570.7 1522.0 209
11” 2-3/4” 909.7 682.2 1819.4 250
12” 3” 1071.0 803.25 2142.0 300

Follow OSHA, ANSI B30.9 and Manufacturerʼs Guidelines. Can fail if damaged, misused or overloaded. Inspect before use. Use only if trained.
Do not exceed rated capacity. Protect sling from contact with edges. DEATH or INJURY can occur from improper use or maintenance.

TITAN 2014 / 2015 CATALOGUE 3

SLINGS
WIRE ROPE SLINGS

Gator-Laid® Slings GATOR-LAID® SLINGS TECHNICAL CHART

Finished Component Standard Vertical Rated Choker Rated Basket Rated Weight
For heavy lifting work this is the most efficient Diameter Parts Eye Size Capacity Capacity Capacity Per Foot
wire rope sling that meets all industrial and regulatory (Tons) (Tons) (Tons) (Lbs.)
[Link] sling and the Gator-Max® sling are 1/2” 1/8” 8” 1.4 1.0 2.8 .26
identical except the Gator-Laid® sling has metal sleeves 5/8” 5/32” 10” 2.0 1.5 4.0 .40
for the splice connection. 3/4” 3/16” 12” 3.0 2.2 6.0 .59
This is the product when a 7/8” 7/32” 14” 4.0 3.0 8.0 .77
big lift but shorter sling is 1” 1/4” 16” 4.8 3.6 9.6 .99
required. It has twelve parts 1-1/4” 5/16” 18” 7.5 5.6 15.0 1.56
of wire rope in the loop. The 1-1/2” 3/8” 20” 10.5 7.8 21.0 2.19
Gator-Laid® products were 1-3/4” 7/16” 22” 14.6 10.9 29.2 3.15
developed in conjunction 2” 1/2” 24” 19.1 14.3 38.2 4.14
with the offshore oil industry 2-1/4” 9/16” 26” 24.1 18.0 48.2 5.31
to provide the world’s best 2-1/2” 5/8” 28” 29.6 22.2 59.2 6.48
heavy lift wire rope slings. 3” 3/4” 30” 42.3 31.7 84.6 9.36
This sling has great flexibility. 3-1/2” 7/8” 35” 57.3 42.9 114.6 12.78
4” 1” 40” 74.4 55.8 148.4 16.65
4-1/2” 1-1/8” 45” 93.6 60.2 187.2 21.06
5” 1-1/4” 50” 115.0 86.2 230.0 26.01
5-1/2” 1-3/8” 55” 138.2 103.6 276.4 31.50
6” 1-1/2” 60” 164.1 123.0 328.2 37.44
7” 1-3/4” 70” 220.3 165.2 440.6 51.03
8” 2” 80” 285.1 213.8 570.2 66.51
9” 2-1/4” 90” 355.6 266.7 711.2 84.24
10” 2-1/2” 100” 434.8 326.1 869.6 104.00
NOTE: Rated capacity is based on 5:1 Design Factor.

Gator-Max® Slings GATOR-LAID® SLINGS TECHNICAL CHART

Finished Component Standard Vertical Rated Choker Rated Basket Rated Weight
For heavy lifting work this is the most efficient wire rope sling Diameter Parts Eye Size Capacity Capacity Capacity Per Foot
that meets all industrial and regulatory standards. In this sling, (Tons) (Tons) (Tons) (Lbs.)
eyes have the wires (6 ropes = 12 parts) laid in parallel.
The eyes are terminated in a hand-tuck-type of construction, 1/2” 1/8” 8” 1.4 1.0 2.8 .26
and then they are wrapped with heavy duty material to keep 5/8” 5/32” 10” 2.0 1.5 4.0 .40
them in position. This sling was developed to meet conditions 3/4” 3/16” 12” 3.0 2.2 6.0 .59
specified by the US Navy and the Wire Rope Technical Board 7/8” 7/32” 14” 4.0 3.0 8.0 .77
Sling Manual. Testing has proven it to be the strongest 1” 1/4” IB¬ 4.8 3.6 9.6 .99
multi-part wire rope sling 1-1/4” 5/16” IS” 7.5 5.6 15.0 1.56
when attached to small 1-1/2” 3/8” 20” 10.5 7.8 21.0 2.19
pins. The eye is terminated 1-3/4” 7/16” 22” 14.6 10.9 29.2 3.15
in a hand-tuck-type of 2” 1/2” 24” 19.1 14.3 38.2 4.14
construction. Another 2-1/4” 9/16” 26” 24.1 18.0 48.2 5.31
2-1/2” 5/8” 28” 29.6 22.2 59.2 6.48
extremely flexible sling.
3” 3/4” 30” 42.3 31.7 84.6 9.36
3-1/2” 7/8” 35” 57.3 42.9 114.6 12.78
4” 1” 40” 74.4 55.8 148.4 16.65
4-1/2” 1-1/8” 45” 93.6 60.2 187.2 21.06
5” 1-1/4” 50” 115.0 86.2 230.0 26.01
5-1/2” 1-3/8” 55” 138.2 103.6 276.4 31.50
6” 1-1/2” 60” 164.1 123.0 328.2 37.44
Follow OSHA, ANSI B30.9 and Manufacturerʼs Guidelines. 7” 1-3/4” 70” 220.3 165.2 440.6 51.03
Can fail if damaged, misused or overloaded. Inspect before use. 8” 2” 80” 285.1 213.8 570.2 66.51
Use only if trained. Do not exceed rated capacity. 9” 2-1/4” 90” 355.6 266.7 711.2 84.24
Protect sling from contact with edges. 10” 2-1/2” 100” 434.8 326.1 869.6 104.00
DEATH or INJURY can occur from improper use or maintenance.
NOTE: Rated capacity is based on 5:1 Design Factor.

4 TITAN 2014 / 2015 CATALOGUE

SLINGS
WIRE ROPE SLINGS

Tri-Flex® Slings PIN SIZE EQUALS

D/d OF 1.5:1 IN THE EYE
BASKET HITCH EQUALS
D/d OF 5:1 USING FINISHED DIAMETER
These slings provide the best combination of strength Composed
and flexibility. Because of the patented TRI-FLEX® SLING 3 Parts of Design Factor 5:1 Rated Loads in Tons Finished Weight
EIP Rope Vertical Choker Vertical Basket Diameter Per Ft. /Lbs.
construction, there is a large
savings in material and
1/4˝ 1.7 1.3 3.4 1/2˝ .44
machine costs in the larger
5/16˝ 2.6 1.9 5.2 5/8˝ .68
sizes; this, combined with ease
3/8˝ 3.6 2.7 7.2 3/4˝ .99
of use make TRI-FLEX® SLINGS
7/16˝ 4.9 3.7 9.8 7/8˝ 1.33
the slings for smart buyers.
1/2˝ 6.4 4.8 12.8 1˝ 1.75
9/16˝ 8.0 6.0 16.0 1 1/8˝ 2.24
5/8˝ 9.9 7.4 19.8 1 1/4˝ 2.73
3/4˝ 14.0 10.5 28.0 1 1/2˝ 3.9
7/8˝ 19.0 14.3 38.0 1 3/4˝ 5.4
1˝ 24.8 18.6 49.6 2˝ 7.0
1 1/8˝ 31.2 23.4 62.4 2 1/4˝ 8.9
1 1/4˝ 38.4 28.8 76.8 2 1/2˝ 10.0
1 3/8˝ 46.0 34.5 92.0 2 3/4˝ 13.3
1 1/2˝ 55.0 41.2 110.0 3˝ 15.8
1 3/4˝ 73.0 54.8 146.0 3 1/2˝ 21.5
2˝ 95.0 71.2 190.0 4˝ 28.0
2 1/4˝ 118.0 88.5 236.0 4 1/2˝ 35.6
2 1/2˝ 145.0 109.0 290.0 5˝ 44.0

T&D Ultra-Flex™ Wire Rope Slings T&D ULTRA-FLEX T M SLINGS TECHNICAL CHART
Component Standard Finished Vertical Rated Choker Rated Basket Rated Weight
This wire rope sling is an extremely flexible product with great Wire Rope Eye Size Diameter Capacity Capacity Capacity Per Ft.
applications for general rigging purposes in the transportation (Tons) (Tons) (Tons) (Lbs.)
and distribution industry. It makes a fantastic choker sling
especially when setting or removing utility poles. Development 5/32˝ 10˝ 5/8˝ 1.7 1.3 3.4 .40
was through committee composed of utility company workers 3/16˝ 12˝ 3/4˝ 2.6 1.9 5.2 .59
and members of the SLINGMAX design team. Actual field 7/32˝ 14˝ 7/8˝ 3.5 2.6 7.0 .77
testing was used to determine merits of the final product. 1/4˝ 16˝ 1˝ 4.6 3.4 9.2 .99
5/16˝ 18˝ 1 1/4˝ 7.0 5.2 14.0 1.56
3/8˝ 20˝ 1 1/2˝ 10.0 7.5 20.0 2.19

TITAN 2014 / 2015 CATALOGUE 5

SLINGS
WIRE ROPE SLINGS

Oilfield Assemblies
Dog House Slings Pipe Slings
- Custom made bridles for raising - Pipe slings are designed to lower
and lowering the dog house. and raise drill pipe and other tubular
- Multiple legs for increased load control products.
- Made with EIPS grade wire rope for - EIPS strength wire rope for increased
increased capacity capacity
- Flemish rolled high efficiency eyes and - Flemish-rolled high efficiency thimble
steel sleeves. eye with sliding choker hook ensures
- Durable metal sling tags provide a safe lift.
the necessary capacity ratings - Durable metal sling tags provide
- Proof Testing Available the necessary capacity ratings and
- Available in 2 and 4 leg configuration manufacturer traceability.
- Proof testing available

B.O.P. Slings
Matting Slings
- Custom slings for lifting and
transporting rig matting. - Custom Made to raise and lower the blow-out preventer stack
- Wire rope and grade 80 or 100 - EIPS strength wire rope for increased capacity
chain and fittings are combined to - Flemished-rolled high efficiency eyes and Crosby steel sleeves
maximize durability and simplify - Durable metal sling tags provide the necessary capacity ratings
handling. and manufacturer traceability.
- Flemish-rolled high efficiency eyes - Proof testing available
and steel sleeves
- Durable metal sling tags provide
the necessary capacity ratings and
manufacturer’s traceability.
Collar Slings
- Proof testing available - Collar slings are designed to lower and raise
drill collars
- EIPS strength wire rope for increased capacity
- Flemish-rolled high efficiency thimble eye with
sliding choker hook ensures a safe lift.
- Durable metal sling tags provide the necessary
Tugger Lines capacity ratings and manufacturer traceability.
- Proof testing available
- Tugger lines are designed to lower
and raise tubular and drilling tools to
and from the drill floor
- EIPS strength wire rope for increased
capacity
- Flemish-rolled high efficiency thimble
eye with swivel self locking hook
ensures a safe lift.
- Durable metal sling tags provide
the necessary capacity ratings and
manufacturer traceability.
- Proof testing available

6 TITAN 2014 / 2015 CATALOGUE

SLINGS
WIRE ROPE SLINGS

Wire Rope Thimbles

G-414 - Available in Hot Dip galvanized or Stainless Steel
(Type 304).
- Greater protection against wear and deformation of
the wire rope eye.
- Stainless steel recommended for more corrosive - Longer service life.
environments where greater protection is required.

Extra Heavy Wire Rope Thimbles

Stock No.
Dimensions (in.)
G-414 meets the performance G-414 SS-414 Weight
Rope Dia. Stainless Per 100 A B C D E F G H
requirements of Federal
(in.) (mm) (lbs)
Specification FF-T-276b Type
III, except for those provisions
*1/4 6-7 1037639 1037960 6.50 2.19 1.62 1.50 .88 .41 .28 .06 .25
required of the contractor.
* 5/16 8 1037657 1037988 11.80 2.50 1.88 1.81 1.06 .50 .34 .08 .30
* 3/8 9-10 1037675 1038004 21.60 2.88 2.12 2.12 1.12 .63 .41 .11 .39
7/16 11-12 1037693 – 34.70 3.25 2.38 2.38 1.25 .72 .47 .12 .45
* 1/2 - 9/16 13-15 1037719 1038022 51.00 3.62 2.75 2.75 1.50 .89 .59 .15 .48
* 5/8 16 1037755 1038040 75.70 4.25 3.25 3.12 1.75 1.00 .66 .16 .53
* 3/4 18-20 1037773 1038068 158.10 5.00 3.75 3.81 2.00 1.22 .78 .22 .69
7/8 22 1037791 – 177.80 5.50 4.25 4.25 2.25 1.38 .94 .22 .78
1 24-26 1037817 – 313.90 6.12 4.50 4.75 2.50 1.56 1.06 .25 .88
1-1/8 - 1-1/4 28-32 1037835 – 400.00 7.00 5.12 5.88 2.88 1.88 1.31 .25 1.25
1-1/4 - 1-3/8 32-35 1037853 – 886.00 9.08 6.50 6.81 3.50 2.25 1.44 .37 1.29
1-3/8 - 1-1/2 35-38 1037871 – 1294.80 9.00 6.25 7.12 3.50 2.62 1.56 .50 1.31
1-5/8 40 1037899 – 1700.00 11.25 8.00 8.12 4.00 3.00 1.72 .50 1.38
1-3/4 44 1037915 – 1775.00 12.19 9.00 8.50 4.50 3.06 1.84 .50 1.50
1-7/8 - 2 48-52 1037933 – 2775.00 15.12 12.00 10.38 6.00 3.38 2.09 .50 1.69
2-1/4 56 1037951 – 3950.00 17.50 14.00 11.88 7.00 3.88 2.38 .62 1.82

* SS-414 sizes available in stainless steel type 304.

G-414SL - Prevents the shackle from being removed and

replaced in the field, which could compromise the
- Greater protection against wear and deformation of
the wire rope eye.
certified integrity of the sling assembly. - Longer service life.
- Available in Hot Dip galvanized. Crosby’s shackle
locking thimbles are galvanized after the welding of
the wedge has been completed.

requirements of Federal Specification RR-S-550E, Type
A, except for those provisions required of the contractor.

G-416 / S-416 Open Spelter Sockets

Stock No. Tolerance
Dimensions (in.)
Structural Ultimate G-416 S-416 Weight +/-
Rope Dia. Strand Dia. Load Galv. S.C. Each A C D F G H J L M N C
(in.) (mm) (in.) (t) (lbs.)

1/4 6-7 – 4.5 1039619 1039628 1.10 4.56 .75 .69 .38 .69 1.56 2.25 1.56 1.31 .36 .06
5/16 - 3/8 8-10 – 12 1039637 1039646 1.30 4.84 .81 .81 .50 .81 1.69 2.25 1.75 1.50 .44 .06
7/16 - 1/2 11-13 – 20 1039655 1039664 2.25 5.56 1.00 1.00 .56 .94 1.88 2.50 2.00 1.88 .50 .06
9/16 - 5/8 14-16 1/2 27 1039673 1039682 3.60 6.75 1.25 1.19 .69 1.13 2.25 3.00 2.50 2.25 .56 .06
3/4 18 9/16 - 5/8 43 1039691 1039708 5.83 7.94 1.50 1.38 .81 1.25 2.62 3.50 3.00 2.62 .62 .06
7/8 20-22 11/16 - 3/4 55 1039717 1039726 9.65 9.25 1.75 1.63 .94 1.50 3.25 4.00 3.50 3.13 .80 .06
1 24-26 13/16 - 7/8 78 1039735 1039744 15.50 10.56 2.00 2.00 1.13 1.75 3.75 4.50 4.00 3.75 .88 .06
1 1/8 28-30 15/16 1 92 1039753 1039762 21.50 11.81 2.25 2.25 1.25 2.00 4.12 5.00 4.62 4.12 1.00 .12
1 1/4 - 1-3/8 32-35 1 1/16 - 1 1/8 136 1039771 1039780 31.00 13.19 2.50 2.50 1.50 2.25 4.75 5.50 5.00 4.75 1.13 .12
1 1/2 38 1 3/16 - 1 1/4 170 1039799 1039806 47.25 15.12 3.00 2.75 1.63 2.75 5.25 6.00 6.00 5.38 1.19 .12
* 1 5/8 * 40-42 1 5/16 - 1 3/8 188 1039815 1039824 55.00 16.25 3.00 3.00 1.75 3.00 5.50 6.50 6.50 5.75 1.31 .12
* 1 3/4 - 1 7/8 * 44-48 1 7/16 - 1 5/8 268 1039833 1039842 82.00 18.25 3.50 3.50 2.00 3.13 6.38 7.50 7.00 6.50 1.56 .12
* 2 - 2 1/8 * 50-54 1 11/16 - 1 3/4 291 1039851 1039860 129.00 21.50 4.00 3.75 2.25 3.75 7.38 8.50 9.00 7.00 1.81 .12
* 2 1/4 - 2 3/8 * 56-60 1 13/16 - 1 7/8 360 1039879 1039888 167.00 23.50 4.50 4.25 2.50 4.00 8.25 9.00 10.00 7.75 2.13 .12
* 2 1/2 - 2 5/8 * 64-67 1 15/16 - 2 1/8 424 1041633 1041642 252.00 25.50 5.00 4.75 2.88 4.50 9.25 9.75 10.75 8.50 2.38 .12
* 2 3/4 - 2 7/8 * 70-73 2 3/16 - 2 7/16 511 1041651 1041660 315.00 27.25 5.25 5.00 3.12 4.88 10.50 11.00 11.00 9.00 2.88 .25
* 3 - 3 1/8 * 75-80 2 1/2 - 2 5/8 563 1041679 1041688 380.00 29.00 5.75 5.25 3.38 5.25 11.12 12.00 11.25 9.50 3.00 .25
* 3 1/4 - 3 3/8 * 82-86 2 3/4 - 2 7/8 722 1041697 1041704 434.00 30.88 6.25 5.50 3.62 5.75 11.88 13.00 11.75 10.00 3.12 .25
* 3 1/2 - 3 5/8 * 88-92 3 - 3 1/8 779 1041713 1041722 563.00 33.25 6.75 6.00 3.88 6.50 12.38 14.00 12.50 10.75 3.25 .25
* 3 3/4 - 4 * 94-102 – 875 1041731 1041740 783.00 36.25 7.50 7.00 4.25 7.25 13.62 15.00 13.50 12.50 3.50 .25

* Cast Alloy Steel.

NOTE: Available with bolt nut and cotter. Contact Crosby for more information.

10 TITAN 2014 / 2015 CATALOGUE

SLINGS
WIRE ROPE SLINGS

Closed Spelter Sockets

G-417 / S-417 - Forged Steel Sockets through 1-1/2”,
cast alloy steel 1-5/8” through 4”.
XXIP (EEIP), RRL, FC or IWRC wire rope.
Strand constructed with minimal number
- Spelter socket terminations have an of wires (e.g. 1 x 7) requires special
efficiency rating of 100%, based on the consideration that socket basket length
catalog strength of wire rope. Ratings are be five (5) times the strand diameter
based on the recommended use with or fifty (50) times the wire diameter,
6 x 7, 6 x 19 or 6 x 37, IPS or XIP (EIP) , whichever is the greater.

Closed grooved Sockets meet the performance

requirements of Federal Specification RR-S-550E, Type
B, except for those provisions required of the contractor.

G-417 / S-417 Closed Spelter Sockets

Stock No.
Dimensions (in.)
Structural Ultimate G-417 S-417 Weight
Rope Dia. Strand Dia. Load Galv. S.C. Each A B C D* F G H J K L
(in.) (mm) (in.) (t) (lbs.)

1/4 6-7 – 4.50 1039897 1039904 .50 4.50 .50 1.50 .88 .38 .69 1.56 2.25 .50 1.75
5/16 - 3/8 8-10 – 12.0 1039913 1039922 .75 4.94 .62 1.69 .97 .50 .81 1.69 2.25 .69 2.06
7/16 - 1/2 11-13 – 20.0 1039931 1039940 1.50 5.50 .69 2.00 1.16 .56 .94 2.00 2.50 .88 2.31
9/16 - 5/8 14-16 1/2 30.8 1039959 1039968 2.50 6.31 .81 2.63 1.41 .69 1.12 2.38 3.00 1.00 2.50
3/4 18 9/16 - 5/8 43.5 1039977 1039986 4.25 7.62 1.06 3.00 1.66 .88 1.25 2.75 3.50 1.25 3.06
7/8 20-22 11/16 - 3/4 65.3 1039995 1040000 7.25 8.75 1.25 3.63 1.94 1.00 1.50 3.25 4.00 1.50 3.50
1 24-26 13/16 - 7/8 81.6 1040019 1040028 10.50 9.88 1.38 4.13 2.30 1.13 1.75 3.75 4.50 1.75 4.00
1-1/8 28-30 15/16 -1 100 1040037 1040046 14.25 11.00 1.50 4.50 2.56 1.25 2.00 4.13 5.00 2.00 4.50
1-1/4 -1-3/8 32-35 1-1/16 -1-1/8 136 1040055 1040064 19.75 12.12 1.63 5.00 2.81 1.50 2.25 4.75 5.50 2.25 5.00
1-1/2 38 1-3/16 - 1-1/4 170 1040073 1040082 29.20 13.94 1.94 5.38 3.19 1.63 2.75 5.25 6.00 2.50 6.00
† 1-5/8 † 40-42 1-5/16 - 1-3/8 188 1040091 1040108 36.00 15.13 2.13 5.75 3.25 1.75 3.00 5.50 6.50 2.75 6.50
† 1-3/4 - 1-7/8 † 44-48 1-7/16 - 1-5/8 268 1040117 1040126 57.25 17.25 2.19 6.75 3.75 2.00 3.13 6.38 7.50 3.00 7.56
† 2 - 2-1/8 † 50-54 1-11/16 - 1-3/4 309 1040135 1040144 79.00 19.87 2.44 7.63 4.38 2.25 3.75 7.38 8.50 3.25 8.81
† 2-1/4 - 2-3/8 † 56-60 1-13/16 - 1-7/8 360 1040153 1040162 105.00 21.50 2.75 8.50 5.00 2.63 4.13 8.25 9.00 3.63 9.75
† 2-1/2 - 2-5/8 † 64-67 1-15/16 - 2-1/8 424 1041759 1041768 140.00 23.50 3.12 9.50 5.50 2.88 4.50 9.25 9.75 4.00 10.62
† 2-3/4 - 2-7/8 † 70-73 2-3/16 - 2-7/16 549 1041777 1041786 220.00 25.38 3.12 10.75 6.25 3.12 4.88 10.19 11.00 4.88 11.25
† 3 - 3-1/8 † 75-80 2-1/2 - 2-5/8 656 1041795 1041802 276.00 27.12 3.37 11.50 6.75 3.38 5.25 11.50 12.00 5.25 11.75
† 3-1/4 - 3-3/8 † 82-86 2-3/4 - 2-7/8 750 1041811 1041820 313.00 29.25 4.00 12.25 7.25 3.62 5.75 12.25 13.00 5.75 12.25
† 3-1/2 - 3-5/8 † 88-92 3 - 3-1/8 820 1041839 1041848 400.00 31.00 4.00 13.00 7.75 3.88 6.31 13.00 14.00 6.25 13.00
† 3-3/4 - 4 † 94 - 102 – 1005 1041857 1041866 542.00 33.25 4.25 14.25 8.50 4.25 7.25 14.25 15.00 7.00 14.00

* Diameter of pin must not exceed pin used on companion 416 socket.
† Cast Alloy Steel.

TITAN 2014 / 2015 CATALOGUE 11

SLINGS
WIRE ROPE SLINGS

National Steel Swaging Sleeves

S-505 - For Flemish eye wire rope splicing.
- Designed for low temperature
- Use round corner stamps to a
maximum depth of 0.015 in. (1/64).
toughness. The area for stamping should be on
- Resists cracking when swaged (equals the side of the sleeve in the plane of
or exceeds stainless steel sleeves). the sling eye, and no less than 0.250
- Special processed low carbon steel. in. (1/4) from either end of the sleeve.
- “COLD TUFF”® for better swageability. - Standard Steel Sleeve terminations have
efficiency ratings as follows based on the
- Can be stamped for identification after
catalog strength of wire rope.
swaging without concern for fractures
when following these directions.

S-505 Termination Efficiency

Type of Wire Rope *
Size IWRC FC
(in.)

1/4 - 1 96% 93%

1-1/8 - 2 92% 89%
2-1/4 and Larger 90% 87%

** NOTE: S-505 Standard Sleeves are recommended for use with 6 x 19 or 6 x 37, IPS or XIP
(EIP), XXIP (EEIP), RRL, FC or IWRC wire rope.

Before using any National Swage fitting with any other type lay, construction or
grade of wire rope, it is recommended that the termination be destructive tested
“Cross Section of Swaged Sleeve” and documented to prove the adequacy of the assembly to be manufactured.

QUIC-PASS® National QUIC-PASS® Swaging System

“The Next Generation in Swaging Systems”

The QUIC-PASS® swaging system allows “Flemish style” wire rope terminations to be swaged in only two passes. This is accomplished
while maintaining currently published efficiency ratings and utilizing National Swage S-505 Standard “COLD TUFF”® Steel Sleeves.
- Allows the swaging process to be completed in just two passes. Resulting in a 50-75% reduction in the number of passes required with
conventional swaging systems.
- Allows the dies to close completely with each pass, resulting in...
- An increase in overall swaging process efficiencies (the job can be performed quicker).
- A reduction in the complexity of swaging (the concern for excess flashing between dies has been eliminated).
- A reduction in training time needed for operators (more user friendly).
- The finished sleeve has a “Hex” appearance that provides a QUIC-CHECK® look to determine if the termination has been swaged and
provides a flat surface that allows for ease of I.D. stamping on the finished sleeve.

12 TITAN 2014 / 2015 CATALOGUE

SLINGS
WIRE ROPE SLINGS

S-421T Wedge Sockets

- Wedge socket terminations have an conjunction with closed swage and
efficiency rating of 80% based on the spelter sockets.
catalog strength of XXIP wire rope. - Secures the tail or “dead end” of the
- Meets or exceeds all requirements of wire rope to the wedge, thus eliminates
ASME B30.26 including identification, loss or “Punch out” of the wedge.
ductility, design factor, proof load and - Eliminates the need for an extra piece
temperature requirements. Importantly, of rope, and is easily installed.
these sockets meet other critical - The TERMINATOR™ wedge eliminates
performance requirements including the potential breaking off of the tail
fatigue life, impact properties and due to fatigue.
material traceability, not addressed by - The tail, which is secured by the
ASME B30.26. base of the clip and the wedge, is left
- Type Approval and certification in undeformed and available for reuse.
accordance with ABS 2007 Steel - Incorporates Crosby’s patented QUIC-
Vessel Rules.1-1-17.7, and ABS Guide CHECK® “Go” and “No-Go” feature cast
for Certification of Cranes. into the wedge. The proper size rope is
- Basket is cast steel and individually determined when the following criteria
magnetic particle inspected. are met:
- Pin diameter and jaw opening allows 1) The wire rope should pass thru the
wedge and socket to be used in “Go” hole in the wedge.
2) The wire rope should NOT pass thru
the “No-Go” hole in the wedge.
S-421T Wedge Sockets - Utilizes standard Crosby Red-U-Bolt®
Assembly includes Socket, Wedge, Pin and Wire Rope Clip wire rope clip.
Optional G-4082 - The 3/8” thru 1-1/8” standard S-421
API 2C
API 2C S-421T S-421T Wedge Only
Bolt, Nut & Cotter wedge socket can be retrofitted with
S-421T S-421T Weight Stock No. Stock No. Weight G-4082 Weight the new style TERMINATOR™ wedge.
Wire Rope Dia. Stock No. Stock No. Each Wedge Only Wedge Only Each Stock No. Each
- Available with Bolt, Nut, and Cotter Pin.
(in.) (mm) (lbs.) (lbs.) (lbs.)
- U.S. patent 5,553,360, Canada patent
3/8 9-10 1035000 1035005 3.18 1035555 1092230 .50 1092227 .38 2,217,004 and foreign equivalents.
1/2 11-13 1035009 1035014 6.15 1035564 1092248 1.05 1092236 .69
- Meets the performance requirements
5/8 14-16 1035018 1035023 9.70 1035573 1092257 1.79 1092254 1.15
of EN 13411-6: 2003.
3/4 18-19 1035027 1035032 14.50 1035582 1092293 2.60 1092281 1.91
7/8 20-22 1035036 1035041 21.50 1035591 1092319 4.00 1092307 3.23
1 24-26 1035045 1035050 30.75 1035600 1092337 5.37 1092325 5.40
1-1/8 28 1035054 1035059 45.30 1035609 1092364 7.30 1092343 7.50
1-1/4 30-32 1035063 1035068 64.90 1035618 1092375 10.60 1092372 10.34

API 2C Dimensions (in.)

S-421T S-421T C
Wire Rope Dia. Stock No. Stock No. A B +/- .09 D G H J* K* L P R S T U V
(in.) (mm)

3/8 9-10 1035000 1035005 5.69 2.72 .81 .81 1.38 3.06 7.80 1.88 .88 1.56 .44 2.13 .44 1.25 1.38
1/2 11-13 1035009 1035014 6.88 3.47 1.00 1.00 1.62 3.76 8.91 1.26 1.06 1.94 .50 2.56 .53 1.75 1.88
5/8 14-16 1035018 1035023 8.25 4.30 1.25 1.19 2.12 4.47 10.75 1.99 1.22 2.25 .56 3.25 .69 2.00 2.19
3/4 18-19 1035027 1035032 9.88 5.12 1.50 1.38 2.44 5.28 12.36 2.41 1.40 2.63 .66 3.63 .78 2.34 2.56
7/8 20-22 1035036 1035041 11.25 5.85 1.75 1.63 2.69 6.16 14.37 2.48 1.67 3.13 .75 4.31 .88 2.69 2.94
1 24-26 1035045 1035050 12.81 6.32 2.00 2.00 2.94 6.96 16.29 3.04 2.00 3.75 .88 4.70 1.03 2.88 3.28
1-1/8 28 1035054 1035059 14.38 6.92 2.25 2.25 3.31 7.62 18.34 2.56 2.25 4.25 1.00 5.44 1.10 3.25 3.56
1-1/4 30-32 1035063 1035068 16.34 8.73 2.62 2.50 3.56 9.39 20.48 2.94 2.34 4.50 1.06 6.13 1.19 4.62 4.94
* Nominal
NOTE: For intermediate wire rope sizes, use next larger size socket.
The S-423T Super TERMINATORTM wedge is designed to be assembled only into the Crosby S-421T TERMINATORTM socket body.
IMPORTANT: The S-423TW for sizes 5/8” through 1-1/8” (14mm through 28mm) will fit respective size standard Crosby S-421T basket.
The 1-1/4” (30-32mm) S-423TW will only fit the Crosby S-421T 1-1/4” basket marked with “ TERMINATORTM”

TITAN 2014 / 2015 CATALOGUE 13

SLINGS
WIRE ROPE SLINGS

Forged Wire Rope Clips

G-450 - Each base has a Product Identification Code (PIC) for
material traceability, the name CROSBY or CG, and a
application instructions and warning information.
- Clip sizes up through 1-1/2” have rolled threads.
size forged into it. - Meets or exceeds all requirements of ASME B30.26
- Based on the catalog breaking strength of wire rope, including identification, ductility, design factor, proof load
Crosby wire rope clips have an efficiency rating of 80% and temperature requirements. Importantly, these wire
for 1/8” - 7/8” sizes, and 90% for sizes 1” through 3-1/2”. rope clips meet other critical performance requirements
- Entire Clip-Galvanized to resist corrosive and rusting including fatigue life, impact properties and material
action. traceability, not addressed by ASME B30.26.
- Sizes 1/8” through 2-1/2” and 3” have forged bases. - Look for the Red-U-Bolt®, your assurance of Genuine
- All Clips are individually bagged or tagged with proper Crosby Clips.

G-450 Crosby® Clips

Dimensions (in.)
G-450 Standard Weight
Rope Size Stock No. Package Qty. Per 100 A B C D E F G H
(in.) (mm) (lbs)

1/8 3-4* 1010015 100 6 .22 .72 .44 .47 .37 .38 .81 .99
3/16* 5* 1010033 100 10 .25 .97 .56 .59 .50 .44 .94 1.18
1/4 6-7 1010051 100 19 .31 1.03 .50 .75 .66 .56 1.19 1.43
5/16 8 1010079 100 28 .38 1.38 .75 .88 .73 .69 1.31 1.66
3/8 9-10 1010097 100 48 .44 1.50 .75 1.00 .91 .75 1.63 1.94
7/16 11 1010113 50 78 .50 1.88 1.00 1.19 1.13 .88 1.91 2.28
1/2 12-13 1010131 50 80 .50 1.88 1.00 1.19 1.13 .88 1.91 2.28
9/16 14-15 1010159 50 109 .56 2.25 1.25 1.31 1.34 .94 2.06 2.50
5/8 16 1010177 50 110 .56 2.25 1.25 1.31 1.34 .94 2.06 2.50
3/4 18-20 1010195 25 142 .62 2.75 1.44 1.50 1.39 1.06 2.25 2.84
7/8 22 1010211 25 212 .75 3.12 1.62 1.75 1.58 1.25 2.44 3.16
1 24-26 1010239 10 252 .75 3.50 1.81 1.88 1.77 1.25 2.63 3.47
1-1/8 28-30 1010257 10 283 .75 3.88 2.00 2.00 1.91 1.25 2.81 3.59
1-1/4 32-34 1010275 10 438 .88 4.44 2.22 2.34 2.17 1.44 3.13 4.13
1-3/8 36 1010293 10 442 .88 4.44 2.22 2.34 2.31 1.44 3.13 4.19
1-1/2 38 1010319 10 544 .88 4.94 2.38 2.59 2.44 1.44 3.41 4.44
1-5/8 41-42 1010337 Bulk 704 1.00 5.31 2.62 2.75 2.66 1.63 3.63 4.75
1-3/4 44-46 1010355 Bulk 934 1.13 5.75 2.75 3.06 2.92 1.81 3.81 5.24
Crosby Clips, all sizes 1/4” and 2 48-52 1010373 Bulk 1300 1.25 6.44 3.00 3.38 3.03 2.00 4.44 5.88
larger, meet the performance 2-1/4 56-58 1010391 Bulk 1600 1.25 7.13 3.19 3.88 3.19 2.00 4.56 6.38
requirements of Federal
Specification FF-C-450 TYPE 2-1/2 62-65 1010417 Bulk 1900 1.25 7.69 3.44 4.13 3.69 2.00 4.69 6.63
1 CLASS 1, except for those ** 2-3/4 ** 68-72 1010435 Bulk 2300 1.25 8.31 3.56 4.38 4.88 2.00 5.00 6.88
provisions required of the 3 75-78 1010453 Bulk 3100 1.50 9.19 3.88 4.75 4.44 2.38 5.31 7.61
contractor. ** 3-1/2 ** 85-90 1010426 Bulk 4000 1.50 10.75 4.50 5.50 6.00 2.38 6.19 8.38
* Electro-plated U-Bolt and Nuts. ** 2-3/4” and 3-1/2” base is made of cast steel.

- Each base has a Product Identification Code (PIC) corrosive and rusting action.
for material traceability, the name CROSBY or “CG”, - All components are Electro-Polished.
and a size forged into it. - All Clips are individually bagged or tagged with proper
- Entire clip is made from 316 Stainless Steel to resist application instructions and warning information.
SS-450 SS-450 Stainless Steel Wire Rope Clips
Dimensions (in.)
SS-450 Standard Weight
Rope Size Stock No. Package Qty. Per 100 A B C D E F G H
(in.) (mm) (lbs)

1/8 3-4 1011250 Bulk 6 .22 .72 .44 .47 .41 .38 .81 .94
3/16 5 1011261 Bulk 10 .25 .97 .56 .59 .50 .44 .94 1.16
1/4 6-7 1011272 Bulk 20 .31 1.03 .50 .75 .66 .56 1.19 1.44
3/8 9-10 1011283 Bulk 47 .44 1.50 .75 1.00 .91 .75 1.63 1.94
1/2 12-13 1011305 Bulk 77 .50 1.88 1.00 1.19 1.13 .88 1.91 2.28
5/8 16 1011327 Bulk 106 .56 2.38 1.25 1.31 1.34 .94 2.06 2.50

14 TITAN 2014 / 2015 CATALOGUE

SLINGS
SYNTHETIC SLINGS

Web Slings
Standard Sling
- Lightweight, pliable, and easy to handle
- Optional eye or endless configurations for various lifting equipment
- Highly visible poly tag stands up to all working conditions
- Stocked in Polyester
- Available in stocking lengths of 2-20 feet with additional lengths
available upon request.
- Special order nylon slings are available upon request.

Proudly made in
Canada

Premium Sling
- Damage to a web sling typically starts along the edge and
progresses across the webbing material. The specialty coated
threads in our premium sling are used on the edges which provide
superior edge cut resistance, increasing sling life. Lightweight,
pliable, and easy to handle
- Optional eye or endless configurations for various lifting equipment
- Highly visible poly tag stands up to all working conditions
- Stocked in Polyester
- Available in stocking lengths of 2-20 feet with additional lengths
Proudly made in
Canada available upon request.
- Available in 1,2,3 and 4 inch widths.
Type 3 & 4 (Eye & Eye) Type 5 (Endless)
WIDTH VERTICAL CHOKER BASKET APPROX. WT. WIDTH VERTICAL CHOKER BASKET APPROX. WT.
(in.) (lbs./ft.) (in.) (lbs./ft.)

1 1600 1280 3200 0.06 1 3200 2560 6400 0.11

2 3100 2480 6200 0.11 2 6200 4960 12400 0.21
SINGLE PLY

3 4700 3760 9400 0.17 3 9400 7520 18800 0.33

SINGLE PLY

4 6200 4960 12400 0.23 4 12400 9920 24800 0.46

6 9300 7440 18600 0.35 5 15600 12480 31200 0.53
8 11800 9440 23600 0.46 6 18600 14880 37200 0.69
10 14700 11760 29400 0.57 8 21200 16960 42400 0.92
12 17600 14080 35200 0.71 10 26500 21200 53000 1.13
12 31800 25440 63600 1.42
1 3100 2480 6200 0.11
2 6200 4960 12400 0.21 1 6200 4960 12400 0.22
DOUBLE PLY

3 8800 7040 17600 0.33 2 12400 9920 24800 0.42

4 11000 8800 22000 0.46 3 17600 14080 35200 0.66
DOUBLE PLY

6 16500 13200 33000 0.69 4 22000 17600 44000 0.92

8 22700 18160 45400 0.92 5 27400 21920 54800 1.06
10 28400 22720 56800 1.13 6 33000 26400 66000 1.38
12 34100 27280 68200 1.42 8 42300 33840 84600 1.84
5:1 Design Factor Working Load Limit in Pounds
10 52900 42320 105800 2.26
12 63500 50800 127000 2.84
5:1 Design Factor Working Load Limit in Pounds
All Tuff-Lift® Slings meet ASME requirements and can be proof-tested upon request.
Every sling is shipped with a Sling Safety Bulletin containing important information about the use of synthetic web slings.

Sling can fail if damaged, misused or overloaded. Inspect before use. Damaged sling shall not be used. Use only if trained. Do not exceed rated capacity.
Protect sling from being cut by load edges, corners, protrusions and abrasive surfaces. Avoid exposure to acid, alkali and temperature over 180°F.
DEATH or INJURY can occur from improper use or maintenance.

TITAN 2014 / 2015 CATALOGUE 15

SLINGS
SYNTHETIC SLINGS

Round Slings
- Superior flexibility ensures load grip
- A durable polyester double cover protects loads and simplifies
inspecting.
- Exclusive vertical weight load tagging system removes guess work
from sling applications
- Strong, lightweight, and easy to handle
- Wear point distribution extends sling life
- For added abrasion resistance, our round slings can be made with
bulked nylon jackets.
- Tuff-Lift® polyester round slings come in 3.5 to 20 feet stocking
lengths and up to 90 feet lengths upon request.
- Slings are repairable to help you maximize your investment.
- No loss of strength when wet
- Conforms easily to load
- Wide variety of load capacities and lengths available
- Available in multi-leg configurations upon request
- Excellent resistance to UV light, mildew and rot
Flag Jacket
Code Color Color Vertical Choker Basket Approx. Wt. Width
(lbs./ft.) (in.)

A3 PURPLE RED 3000 2400 6000 0.20 2

A6 GREEN RED 6000 4800 12000 0.45 2
A9 YELLOW RED 9000 7200 18000 0.65 3
A12 TAN RED 12000 9600 24000 0.75 3
A14 RED RED 14000 11200 28000 0.80 3
A17 WHITE RED 17000 13600 34000 0.90 3
A23 BLUE RED 23000 18400 46000 1.30 4
A26 ORANGE RED 26000 20800 52000 1.50 4
See round sling technical data page A32 ORANGE RED 32000 25600 64000 1.70 4
for inspection & removal criteria
A40 ORANGE RED 40000 32000 80000 1.90 5
A54 ORANGE RED 54000 43200 108000 2.10 5
A68 ORANGE RED 68000 54400 136000 2.50 5

Proudly made in
A70 ORANGE RED 70000 56000 140000 2.90 6
Canada A90 ORANGE RED 90000 72000 180000 3.50 6

5:1 Design Factor Working Load Limit in Pounds

- Titan’s state-of-the art

round sling machine
is used to build some
of our strongest
slings including
Twin-Path®. In this
picture you can see
the internal yarns for
the sling which are
bound together to
form the load bearing
components of a
round sling.

16 TITAN 2014 / 2015 CATALOGUE

SLINGS
SYNTHETIC SLINGS

Twin-Path® Extra Sling Vertical Choker Vertical Basket Basket Hitches Approximate
Weight Nominal

with Covermax® and Twin-Path® Sling

Stock No.
(Lbs. per Ft.) Body Width
(Bearing-Bearing) (Inches)*

K-Spec® Core Yarn TPXCF/TPXC 1000 10,000 8,000 20,000 17,320 14,140 .40 1.5 - 3˝
TPXC This is the world’s first truly TPXCF/TPXC 1500 15,000 12,000 30,000 25,980 21,210 .45 1.5 - 3˝
ergonomic sling with Covermax® covers TPXCF/TPXC 2000 20,000 16,000 40,000 34,640 28,280 .51 1.5 - 3˝
for superior abrasion resistance. These TPXCF/TPXC 2500 25,000 20,000 50,000 43,300 35,350 .57 2.0 - 4˝
are made in sizes up to 600 tons vertical TPXCF/TPXC 3000 30,000 24,000 60,000 51,960 42,420 .71 2.0 - 4˝
rated capacity. Larger capacity slings TPXCF/TPXC 4000 40,000 32,000 80,000 69,280 56,560 .83 2.0 - 4˝
are available on special order. These TPXCF/TPXC 5000 50,000 40,000 100,000 86,600 70,700 1.14 2.5 - 5˝
slings have overload indicators, inner red TPXCF/TPXC 6000 60,000 48,000 120,000 103,920 84,840 1.27 2.5 - 5˝
cover, and are used worldwide in place of TPXCF/TPXC 7000 70,000 56,000 140,000 121,240 98,980 1.39 2.5 - 5˝
wire rope slings for heavy lifts. They are TPXCF/TPXC 8500 85,000 68,000 170,000 147,220 120,190 1.65 3.0 - 6˝
approximately 10% of the weight of a steel TPXCF/TPXC 10000 100,000 80,000 200,000 173,200 141,400 1.84 3.0 - 6˝
sling. These products are repairable. TPXCF/TPXC 12500 125,000 100,000 250,000 216,500 176,750 2.35 4.0 - 8˝
The Twin-Path® patented design provides TPXCF/TPXC 15000 150,000 120,000 300,000 259,800 212,100 2.66 4.0 - 8˝
the rigger with two connections between TPXCF/TPXC 17500 175,000 140,000 350,000 303,100 247,450 3.14 4.0 - 8˝
the hook and the load for redundant back- TPXCF/TPXC 20000 200,000 160,000 400,000 346,400 282,800 3.45 5.0 - 10˝
up protection. These slings have less than TPXCF/TPXC 25000 250,000 200,000 500,000 433,000 353,500 4.07 5.0 - 10˝
1% stretch at rated capacity. If ergonomics, TPXCF/TPXC 27500 275,000 220,000 550,000 476,300 388,850 4.61 6.0 - 12˝
productivity and safety are important, then TPXCF/TPXC 30000 300,000 240,000 600,000 519,600 424,200 4.92 6.0 - 12˝
these slings are the only choice. This is the TPXCF/TPXC 40000 400,000 320,000 800,000 692,800 565,600 6.54 7.0 - 14˝
lightest and strongest sling on the market TPXCF/TPXC 50000 500,000 400,000 1,000,000 866,000 707,000 8.15 7.0 - 14˝
today with K-Spec® – the longest lasting TPXCF/TPXC 60000 600,000 480,000 1,200,000 1,039,000 848,000 10.20 11.0 - 22˝
load bearing core yarn, backed
* Dimensions can vary according to the hardware or bearing points the slings are used with.
by independent testing. Minimum is “tapered” width; Maximum is the at tubing width. METRIC SLINGS AVAILABLE.

Check-Fast Inspection System

(also known as the √ Fast System)
The Check-Fast® System is designed to improve job-site safety. The √ Fast® Tag and External Warning Indicator
(EWI) on a roundsling product provides for a pass/fail inspection of the internal load bearing core yarn. Damage
to the core yarn from ultraviolet (UV) light degradation, fiber on fiber abrasion, fatigue, and severe overload
can be detected. If the sling is mistakenly overloaded beyond rated capacity, the EWI is designed to disappear
before the sling fails. The sling inspector now has a GO/NO-GO inspection device rather than relying on a
subjective handover-hand inspection to make an educated guess if the load bearing core yarns are in good
condition. This safety system is available for
High Performance K-Spec® Fiber Roundslings
or polyester roundslings fabricated by
authorized SLINGMAX® Dealers.

TITAN 2014 / 2015 CATALOGUE 17

SLINGS
SYNTHETIC SLINGS

Synthetic Sling Protection

Tuff-Lift® Wear Pads CornerMax® Pad
The Tuff-Lift® Wear Pad with Velcro closure CornerMax pads create a “tunnel” of cut
provides for abrasion or wear protection. protection- a no-touch zone. Therefore,
They will help keep the load from the edge does not come in contact with
damaging the sling. the pad or sling thus protecting the sling.
Note that the sides of the load must
completely support the pads in order
to create and maintain the “tunnel”.

CornerMax® Sleeves
CornerMax® sleeves may look like
traditional protection sleeves, but ours
are made of Dyneema® fiber that is
specially woven to provide cut protection
for a variety of edges and surfaces.
Most commonly used sleeve material
Magnetic Sling
cannot stop an edge from cutting the
sleeve and possibly the sling too.
Protection
Made of solid nylon, attaches with magnets,
works with: Steel slings, Flat Web slings,
and Round slings. 1/7th the weight of steel,
no tools are needed since magnets allow
for quick and easy attachment and removal. Available in nine inch,
12-inch and 18-inch models.

Abrasion Protection
Synthetic Armor™ Shackle Pin Pads
Pads The Shackle Pin Pad is the latest Slingmax
Solution to the problem of sharp edges on
For extra protection for synthetic, the pin-side of a shackle. If you must rig a
wire rope, and chain slings, we have synthetic sling on the pin, protect it with a
available an assort-ment of materials Shackle Pin Pad. This pad is easy
that we incorporate in our Synthetic to connect and easy to remove.
Armor Pads. These are primarily for
abrasion or wear protection. Not only will these wear pads keep
the load from damaging the slings, but they will also protect the
load from being scratched by the slings.

18 TITAN 2014 / 2015 CATALOGUE

SLINGS
SYNTHETIC SLINGS

Tuff-Lift® Web Padding

Eye Pad Body Pad Edge Guard Eye Sleeve Tube Sleeve

Equalizer Block
The Equalizer Block is used to evenly distribute weight when performing lifts. Rather than
adjusting slings and hooks prior to completing a lift, the Equalizer Block will automatically
adjust itself when pressure is put on the device from the sling. This was designed
specifically for Twin-Path® Extra Slings.

Capacity Suggested Sling

Part No. (5:1 DF) Inside Width for 90° Basket Block Weight
(Inches) (lbs.)

SEB25 25 US ton 4 TPXCF2500 79

SEB50 50 US ton 6 TPXCF5000 220
SEB75 75 US ton 6 TPXCF7500 270
SEB125M 125 metric ton 8 TPXCF15000 640

Sling can fail if damaged, misused or overloaded. Inspect before use. Damaged sling shall
not be used. Use only if trained. Do not exceed rated capacity. Protect sling from being cut
by load edges, corners, protrusions and abrasive surfaces. Avoid exposure to acid, alkali and
temperature over 180°F. DEATH of INJURY can occur from improper use or maintenance.

TITAN 2014 / 2015 CATALOGUE 19

SLINGS
SYNTHETIC SLINGS

G-100 Web Sling Connector.

Working For Grade
Item No. Load Limit 100 Chain Dimensions (inch) N.W.
Lbs* tonnes* inch A B D K W Lbs

X-016-06 2,700 1.4 7/32 0.59 0.67 0.28 2.16 1.54 0.4
X-016-07 5,700 2.5 1/4~5/16 0.71 0.89 0.35 2.44 1.57 0.7
X-016-10 8,800 4.0 3/8 0.99 1.06 0.50 3.07 1.85 1.3
X-016-13 15,000 6.7 1/2 1.19 1.38 0.62 3.74 2.09 2.4
X-016-16 22,600 10.0 5/8 1.42 1.51 0.75 4.53 2.64 4.4
X-016-20 35,300 16.0 3/4 1.65 1.81 0.87 5.20 3.15 7.3
X-016-22 42,700 19.0 7/8 1.93 2.32 0.94 7.36 4.92 16.3

* Design Factor 4:1 proof tested and certified.

G-100 Web Sling Hook.

Working
Item No. Load Limit Dimensions (inch) N.W.
Lbs* tonnes* K P W T H Lbs

X-032-01 2,200 1 3.50 0.98 1.69 0.59 0.79 1.5

X-032-02 4,400 2 4.57 1.18 2.09 0.79 1.06 3.3
X-032-01 6,600 3 4.69 1.26 2.52 1.02 1.26 5.3
X-032-01 11,000 5 5.71 1.77 2.40 1.50 1.73 7.7
* Design Factor 5:1 proof tested and certified.

G-100 Round Sling Self Locking Hook.

Working For Grade
Item No. Load Limit 100 Chain Dimensions (inch) N.W.
Lbs* tonnes* inch A B D K W Lbs

X-028-06 2,700 1.4 7/32 5.43 1.14 1.54 0.59 0.75 1.3
X-028-07 5,700 2.5 1/4~5/16 6.65 1.34 1.57 0.79 0.94 2.4
X-028-10 8,800 4.0 3/8 7.72 1.77 1.85 1.02 1.19 4.0
X-028-13 15,000 6.7 1/2 9.96 2.13 2.09 1.19 1.57 7.9
X-028-16 22,600 10.0 5/8 12.00 2.44 2.64 1.42 1.93 15.2
X-028-20 35,300 16.0 3/4 12.91 3.54 3.15 1.91 2.36 23.6
X-028-22 42,700 19.0 7/8 16.38 3.14 4.92 2.12 2.48 39.0
* Design Factor 4:1 proof tested and certified.

20 TITAN 2014 / 2015 CATALOGUE

SLINGS
SYNTHETIC SLINGS

High Performance Sling Connector is designed to connect

High Performance Synthetic Slings of all materials.
- Capacities available: - All Alloy Construction
- Working Load Limit (5 to 1): 2,268 - Design Factor of 5 to 1.
through 27,215 kg. - Individually Proof Tested at 2.5 times
- Sling Body Widths: 51mm through the Working Load Limit.
152mm. - Each connector has a Product
- Allows easy connection to master links Identification Code (PIC) for material
or eye hooks, and is ideal for bridles. traceability, along with a frame size, and
S-237 - Increased radius of bow gives wider the name Crosby and USA in raised
sling bearing surface resulting in an letters.
increased area for load distribution, thus:
- Increasing Synthetic Sling efficiency
as compared to master links, shackle
bows and conventional eye hooks.
This allows 100% of the slings rated
Working Load Limit to be achieved.
- Allows better load distribution on
S-238 internal fibers.

S-237 High Performance Sling Connector

S-237
Working Web to Nominal
Load Limit Lok-A-Loy Sling Dimensions (mm)
Assy. Frame Body Lok-A-Loy Weight
4:1 5:1 Stock No. No. Width Size Each A B C E G H L N R S W
(kg)* (kg) (mm) (mm) (kg)

2835 2268 1020695 5 51 10 .52 22.4 36.1 50.8 80.8 25.4 20.3 107 26.4 74.2 12.2 35.1
5670 4536 1020704 10 76 16 1.34 36.1 38.6 69.9 105 31.8 24.9 144 43.4 100 19.0 44.5
8505 6804 1020713 15 76 20 2.15 41.4 40.1 69.9 111 35.1 27.9 165 51.8 113 23.6 47.8
14175 11340 1020722 25 102 22 3.90 50.8 59.2 95.3 152 44.5 35.8 202 57.7 140 26.9 57.2
17010 13607 1020731 30 102 22 4.19 50.8 55.9 95.3 157 44.5 35.8 199 57.7 137 26.9 60.5
22680 18145 1020740 40 127 25 7.1 57.2 73.9 121 184 57.2 45.2 240 62.0 164 31.0 78.5
34020 27215 1020759 60 152 32 11.8 65.0 85.3 146 232 58.7 47.2 281 78.0 196 38.1 80.3

* Maximum Proof Load is 2 times the Working Load Limit at 4:1 design factor. Minimum Ultimate strength is 5 times the Working Load Limit.
Crosby Sling Saver hardware meets the requirements for minimum stock diameter or thickness, and effective contact width shown in the Recommended Standards Specification for
Synthetic Polyester Round Slings by the Web Sling & Tie Down Association. WSTDA-RS1 (revised 2010)

S-238 High Performance Sling Connector

S-238 Nominal
Working Web to Web Sling Dimensions (mm)
Load Assembly Frame Body Lok-A-Loy Weight
Limit Stock No. No. Width Size Each A B C E G H K M W
(kg) (mm) (mm) (kg)

2268 1020415 5 50.8 10 .73 22.4 36.1 50.8 80.8 25.4 20.3 124 83.8 35.1
4536 1020423 10 76.2 16 1.50 36.1 38.6 69.9 105 31.8 24.9 145 95.5 44.5
6804 1020432 15 76.2 20 2.22 41.4 40.1 69.9 111 35.1 27.9 156 101 47.8
11340 1020441 25 102 22 4.58 50.8 59.2 95.3 152 44.5 35.8 213 142 57.2
13608 1020450 30 102 22 5.17 50.8 55.9 95.3 157 44.5 35.8 207 135 60.5
18144 1020469 40 127 25 9.39 57.2 73.9 121 184 57.2 45.2 266 176 78.5
27216 1020478 60 152 32 14.5 65.0 85.3 146 232 58.7 47.2 298 203 80.3
* Maximum Proof Load is 2.5 times the Working Load Limit. Minimum Ultimate strength is 5 times the Working Load Limit.
Crosby Sling Saver hardware meets the requirements for minimum stock diameter or thickness, and effective contact width shown in the Recommended Standards Specification for
Synthetic Polyester Round Slings by the Web Sling & Tie Down Association. WSTDA-RS1 (revised 2010).

TITAN 2014 / 2015 CATALOGUE 21

SLINGS
SYNTHETIC SLINGS

G-100 Swivel Self Locking Hook, with ball bearing.

Ball bearing performs to fully swivel under load.
Working For Grade
Item No. Load Limit 100 Chain Dimensions (inch) N.W.
Lbs* tonnes* inch K P B A D T H Lbs

X-027N-06 2,700 1.4 7/32 5.87 1.10 0.87 1.26 0.47 0.59 0.87 1.3
X-027N-07 5,700 2.5 1/4~5/16 7.32 1.34 1.14 1.42 0.51 0.79 1.02 2.6
X-027N-10 8,800 4.0 3/8 8.58 1.73 1.34 1.61 0.63 1.02 1.34 4.4
X-027N-13 15,000 6.7 1/2 10.87 2.01 1.69 1.81 0.83 1.18 1.65 9.0
X-027N-16 22,600 10.0 5/8 12.95 2.36 1.97 2.40 0.91 1.42 2.20 15.0
X-027N-20 35,300 16.0 3/4 15.24 2.76 3.23 2.91 0.98 2.09 2.56 27.8
X-027N-22 42,700 19.0 7/8 17.99 3.15 3.74 3.82 1.30 1.93 2.80 39.6
X-027N-26 59,700 26.5 1 21.06 3.90 4.53 4.84 2.01 2.20 3.11 69.3

* Design Factor 4:1 proof tested and certified.

D G-100 Eye Sling Hook, with latch.

Working For Grade
A Item No. Load Limit 100 Chain Dimensions (inch) N.W.
P1 Lbs* tonnes* inch K P1 A D T H Lbs
K X-044/S-06 2,700 1.4 7/32 3.15 0.91 0.79 0.39 0.67 0.75 0.7
X-044/S-07 5,700 2.5 1/4~5/16 3.86 1.10 0.98 0.47 0.79 0.91 1.1
X-044/S-10 8,800 4.0 3/8 4.76 1.42 1.26 0.59 0.91 1.22 2.2
H X-044/S-13 15,000 6.7 1/2 5.98 1.58 1.57 0.71 1.06 1.50 4.0

T
X-044/S-16 22,600 10.0 5/8 7.28 1.73 1.97 0.87 1.26 1.77 6.8
X-044/S-20 35,300 16.0 3/4 9.05 2.13 2.44 1.06 1.89 2.51 16.0
X-044/S-22 42,700 19.0 7/8 9.65 2.99 2.01 1.22 2.05 2.48 20.5
X-044/S-26 59,700 26.5 1 11.22 3.03 2.56 1.38 2.36 3.07 28.6
X-044/S-32 90,400 40.0 1-1/4 13.86 4.49 3.45 1.57 2.56 3.15 37.4

* Design Factor 4:1 proof tested and certified.

A G-100 Clevis Sling Hook, with latch.

Working For Grade
Item No. Load Limit 100 Chain Dimensions (inch) N.W.
P1 Lbs* tonnes* inch A K P1 T H Lbs

K X-043/S-06 2,700 1.4 7/32 0.24 3.82 0.91 0.59 0.91 0.7
X-043/S-07 5,700 2.5 1/4~5/16 0.35 3.86 1.06 0.71 0.87 1.3
X-043/S-10 8,800 4.0 3/8 0.43 4.80 1.34 0.94 1.18 2.4
H X-043/S-13 15,000 6.7 1/2 0.55 5.79 1.73 1.18 1.46 5.1
X-043/S-16 22,600 10.0 5/8 0.67 6.54 1.89 1.54 1.65 8.4
T
X-043/S-20 35,300 16.0 3/4 0.94 8.15 2.24 1.89 2.52 18.9

* Design Factor 4:1 proof tested and certified.

22 TITAN 2014 / 2015 CATALOGUE

SLINGS
SYNTHETIC SLINGS

Sling Saver Synthetic Sling Hooks

- Hook capacities available: 1-1/2, 3, and 5 - Eye is designed with a wide beam
metric tons. surface which:
- All Alloy construction. - Eliminates bunching effects.
- Design factor of 5 to 1. - Reduces sling tendency to slide.
- Each hook has a Product Identification - Allows a better load distribution on
Code (PIC) for material traceability along internal fibers.
with a working load limit and the name - All hooks feature Crosby’s patented
Crosby forged into it. QUIC-CHECK® indicators.
- Originally designed for 2-Ply Web slings, - Hook Web Sling Eye width available: 25,
the Crosby Web Sling hook can also 50 and 75mm.
be used with Round Slings as long - Fatigue rated to 20,000 cycles at 1-1/2
as the Working Load Limit ratings are times the Working Load Limit.
Ws-320A Synthetic Sling Hook compatible. The new hook incorporates
the following features:

WS-320A Synthetic Sling Hook

Web Sling Round Working WS-320A WSL-320A S-4320
Eye Width Sling Size Load Limit Stock No. with Latch Weight Each Hook I.D. Code Rep. Latch
(mm) (No.) (t)* (kg)

25.0 1 1-1/2 1022701 1022706 .50 FA 1096374

50.0 2 3 1022712 1022717 1.30 HA 1096468
75.0 3 5 1022723 1022728 2.99 IA 1096515

Dimensions (mm)
Hook ID Working
Code Load Limit A B C D F G H J K L M N O P Q T AA
(t)*

FA 1-1/2 133 57.5 101 79.0 35.1 21.3 23.9 23.6 18.0 38.1 16.0 19.1 23.1 57.0 25.7 24.9 51.0
HA 3 181 93.0 135 101 41.4 28.7 33.5 28.7 23.9 63.5 21.6 28.7 27.7 71.5 42.9 29.5 51.0
IA 5 237 130 179 122 51.0 36.6 41.4 37.3 33.3 95.5 28.7 41.4 34.5 89.0 66.0 38.9 63.5
* Maximum Proof Load is 2-1/2 times the Working Load Limit. Minimum Ultimate Load is 4 times the Working Load Limit.
Crosby Sling Saver hardware meets the requirements for minimum stock diameter or thickness, and effective contact width shown in the Recommended Standards Specification for
Synthetic Polyester Round Slings by the Web Sling & Tie Down Association. WSTDA-RS1 (revised 2010)

TITAN 2014 / 2015 CATALOGUE 23

SLINGS
CHAIN SLINGS

CO SOS SOG SGG SGS DOS ADOS DOF DOG

Grade 80 Grade 100

CHOKER 120° 2 PART 3 PART 4 PART CHOKER 120° 2 PART 3 PART 4 PART
SIZE VERTICAL or greater 60° 60° 60° SIZE VERTICAL or greater 60° 60° 60°
(in.) (in.)

7/32 2500 2000 3600 6500 6500 1

/4
(9/32) 4300 3440 7400 11200 11200
1
/4
(9/32) 3500 2800 6100 9100 9100 5/16 5700 4560 9900 14800 14800
5/16 4500 3/8 8800 7040 15200 22900 22900
3/8 7100 5680 12300 18400 18400 1/2 15000 12000 26000 39000 39000
1/2 12000 9600 20800 31200 31200 5/8 22600 18080 39100 58700 58700
5/8 18100 14480 31300 47000 47000 3/4 35300 28240 61100 91700 91700
3/4 28300 22640 49000 73500 73500 7/8 42700 34160 74000 110900 110900
7/8 34200 27360 59200 88900 88900 1 59700 47760 103400 155100 155100
1 47700 38160 82600 123900 123900 1 1/4 90400 72320 153300 234900 234900
1 1/4 72300 57840 125200 187800 187800 4:1 Design Factor Working Load Limit in Pounds

Chain Slings Information

How to Order the Proper Chain Sling When ordering, please be sure to include the following:
Type of Sling Type of Master Attachment Type of End Attachment
S – Single Chain O – Oblong Link O – Oblong Link
D – Double Chain P – Pear Link P – Pear Link
T – Triple Chain R – Ring R – Ring
Q – Quadruple Chain S – Sling Hook S – Sling Hook
G – Grab Hook G – Grab Hook
Adjustable Styles: F – Foundry Hook F – Foundry Hook
ASB – Single Style B
ADB – Double Style B Sling Inspection & Testing Also Available!
See page 98 for more information.

How to Select the Proper Chain

1. Determine the maximum weight of LOAD.
2. From the working load limit chart above, determine the SIZE
of the body chain. Be sure to consider the effect of the angles.
3. Determine the REACH for the selected angle by measuring the
distance from the upper bearing surface of the master link to
the bearing surface of the lower attachment.

24 TITAN 2014 / 2015 CATALOGUE

SLINGS
CHAIN SLINGS

Less is More with FlexiLeg™

FlexiLeg is a solution that allows you to have an instant leg change. One single master link and a combination of five legs replace four
complete slings, a total of ten legs, with the traditional system. By using the unique features of the GrabiQ range, Gunnebo Lifting has
increased the flexibility even further.

GrabiQ FlexiLeg – a total

of 5 legs replaces the
total of 10 legs with the
old traditional system.

Old system - 10 legs in 4 separate chain slings.

1 Leg 2 Leg 3 Leg 4 Leg

Why do you want instant leg-change?

- It will enable the user to change slings, leg by leg, which will make it lighter and easier to work with.
- Sling legs that are not being used can easily be removed, thereby increasing safety at the work site.
- The quantity of sling material is greatly reduced, providing cost savings.
- The chain sling can be rebuilt on site, thus increasing efficiency.

Art. no. Code Art. no. Code

Z101055 FlexiLeg EGKN 10 mm L= 2 m Z101050 FlexiLeg GBK 6 mm L= 2 m

Z101056 FlexiLeg GBK 13 mm L= 2 m Z101051 FlexiLeg EGKN 6 mm L= 2 m
Z101057 FlexiLeg EGKN 13 mm L= 2 m Z101052 FlexiLeg GBK 8 mm L= 2 m
Z101058 FlexiLeg GBK 16 mm L= 2 m Z101053 FlexiLeg EGKN 8 mm L= 2 m
Z101059 FlexiLeg EGKN 16 mm L= 2 m Z101054 FlexiLeg GBK 10 mm L= 2 m

Related products QuickPin - For safe exchange FlexiTag - For every GrabiQ sling
of sling legs - Specially designed for FlexiLeg
- Fits all C-components! (CL, - Fits all other GrabiQ slings
CLD, CG, CGD) - WLL and chain size pre-stamped
- Has instant close/open for 1 - 4 legs
function, no tools needed! - Leg angle 45/60 degree shown
- Easy to retro-fit! in contour
- Made of stainless steel for - Made of stainless steel for use in
long product life span. all weather conditions.

TITAN 2014 / 2015 CATALOGUE 25

SLINGS
CHAIN SLINGS

Chain Sling Solutions

1-leg Chain Slings
Type: Master link MG, Chain Type: Master link MG, Chain Type: Master link MF, C-grab CG,
KLA, Safety Hook GBK KLA, Hook with latch EGKN Chain KLA, Safety Hook BKG
Total Total Total
Component Component Component
Dim. WLL length Dim. WLL length Dim. WLL length
(mm) (t*) (mm) (mm) (t*) (mm) (mm) (t*) (mm)

6 1.5 171 6 1.5 231 6 1.5 200

8 2.5 296 8 2.5 261 8 2.5 346
10 4.0 361 10 4 331 10 4 424
13 6.7 453 13 6.7 408 13 6.7 504
16 10 527 16 10 481 16 10 621
20 16 605

8 2.5 342 6 2.1 1.5 235

10 4 415 8 3.5 2.5 296
13 6.7 507 10 5.6 4 361
16 10 624 13 9.5 6.7 453
20 16 605 16 14 10 527

Type: Master link MGD, Chain KLA, Type: Master link MF, C-grab Duo
Latch Hook EGKN CGD, Chain KLA, Safety Hook GBK
WLL tonnes* WLL tonnes*
ß 0-45° ß 45-60° Component ß 0-45° ß 45-60° Component
Dim. α 0-90° α 90-120° l length Dim. α 0-90° α 90-120° l length
(mm) (mm) (mm) (mm)

6 2.1 1.5 230 6 2.1 1.5 291

8 3.5 2.5 261 8 3.5 2.5 366
10 5.6 4 331 10 5.6 4 444
13 9.5 6.7 408 13 9.5 6.7 534
16 14 10 481 16 14 10 671

Type: Master link MF, C-grab Duo Type: Master link MGD, Chain KLA, C-lok CL
CGD, Chain KLA, Latch Hook EGKN
WLL tonnes* WLL tonnes* WLL tonnes choked
ß 0-45° ß 45-60° Component ß 0-45° ß 45-60° ß 0-45° ß 45-60° Component
Dim. α 0-90° α 90-120° l length Dim. α 0-90° α 90-120° α 0-90° α 90-120° l length
(mm) (mm) (mm) (mm)

6 2.1 1.5 286 6 2.1 1.5 1.6 1.2 187

8 3.5 2.5 342 8 3.5 2.5 2.7 2 230
10 5.6 4 415 10 5.6 4 4.4 3.2 285
13 9.5 6.7 507 13 9.5 6.7 7.4 5.4 359
16 14 10 625 16 14 10 11 8 429

* Safety factor 4:1

26 TITAN 2014 / 2015 CATALOGUE

SLINGS
CHAIN SLINGS

3-leg Chain Sling

Type: Master link MF, C-grab CG, C-grab Type: Master link MF, C-grab CG, C-grab
Duo CGD, Chain KLA, Safety Hook GBK Duo CGD, Chain KLA, Latch Hook EGKN
WLL tonnes* WLL tonnes*
ß 0-45° ß 45-60° Component ß 0-45° ß 45-60° Component
Dim. α 0-90° α 90-120° l length Dim. α 0-90° α 90-120° l length
(mm) (mm) (mm) (mm)

6 3.1 2.2 311 6 3.1 2.2 306

8 5.2 3.7 392 8 5.2 3.7 357
10 8.4 6 474 10 8.4 6 444
13 14 10 604 13 14 10 559
16 21 15 680 16 21 15 634

4-leg Chain Sling

Type: Master link MF, C-grab Duo Type: Master link MF, C-grab Duo CGD,
CGD, Chain KLA, Safety Hook GBK Chain KLA, Latch Hook EGKN
WLL tonnes* WLL tonnes*
ß 0-45° ß 45-60° Component ß 0-45° ß 45-60° Component
Dim. α 0-90° α 90-120° l length Dim. α 0-90° α 90-120° l length
(mm) (mm) (mm) (mm)

6 3.1 2.2 311 6 3.1 2.2 306

8 5.2 3.7 392 8 5.2 3.7 357
10 8.4 6.0 474 10 8.4 6 444
13 14 10 604 13 14 10 559
16 21 15 680 16 21 15 634

WLL in tonnes, Grade 10 GrabiQ

Chain ß 0-45° ß 45-60° ß 0-45° ß 45-60° ß 0-45° ß 45-60°

Dim. α 0-90° α 90-120° α 0-90° α 90-120° α 0-90° α 90-120°

6 1.5 2.12 1.5 3.15 2.24 1.6 1.2

8 2.5 3.5 2.5 5.2 3.7 2.7 2
10 4.0 5.6 4 8.4 6 4.4 3.2
13 6.7 9.5 6.7 14.0 10 7.4 5.3
16 10 14 10 21.0 15 11 8
20 16 22.4 16 33.6 24 17.6 12.8
22 19 26.9 19.0 40.3 28.5 20.9 15.2
26 27.0 38.2 27.0 57.3 40.5 29.7 21.6

Safety factor 4:1. Working load limits are based upon equally loaded and disposed sling legs.

TITAN 2014 / 2015 CATALOGUE 27

SLINGS
CHAIN SLINGS

Grab Hook GG
Art. no. Code WLL L B Weight
(tonnes*) (kg)

Z100845 GG-7-10 2 57 10 0.3

B14771 GG-8-10 2.5 57 10.5 0.4
B14772 GG-10-10 4 76 12 0.9
B14773 GG-13-10 6.7 97 16 1.8
B14774 GG-16-10 10 124 20 3.1
Z101152 GG-20-10 16 147 26 7.0

Grab Hook OG
Art. no. Code WLL L B E F Weight
(tonnes*) (kg)

Z101301 OG-22-10 20 187 26 46 32 8.6

Z101302 OG-26-10 27 228 32 55 38 14

Grab Hook OGN

Art. no. Code WLL L B E F Weight
(tonnes*) (kg)

Z101316 OGN-22-10 20 187 26 46 32 8.8

Z101317 OGN-26-10 27 228 32 55 38 14.7

A G-100 Clevis Grab Hook

P Not for use with Omega Link.
No reduction of working load limit, thanks to supportingwings which prevent chain link deformation.
Working For Grade
L Item No. Load Limit 100 Chain Dimensions (inch) N.W.
K
Lbs* tonnes* inch A P F K H L Lbs

X-042-06 2,700 1.4 7/32 0.28 0.32 0.98 1.85 0.71 3.11 0.4
H X-042-07 5,700 2.5 1/4~5/16 0.39 0.39 1.18 2.17 0.87 3.66 0.9
F
X-042-10 8,800 4.0 3/8 0.43 0.51 1.61 3.03 1.14 5.04 1.7
X-042-13 15,000 6.7 1/2 0.59 0.67 2.05 3.90 1.50 6.50 3.5
X-042-16 22,600 10.0 5/8 0.71 0.83 2.24 4.49 1.77 7.68 6.0
X-042-20 35,300 16.0 3/4 0.87 0.91 2.87 5.12 2.05 8.74 9.9
* Design Factor 4:1 proof tested and certified.

A G-100 Clevis Grab Hook - Without Cradle.

Not for use with Omega Link.
P
Working For Grade
Item No. Load Limit 100 Chain Dimensions (inch) N.W.
L Lbs* tonnes* inch P A F K H L Lbs
K

X-0421-06 2,700 1.4 7/32 0.31 0.28 0.51 1.85 0.71 3.11 0.7

H
X-0421-07 5,700 2.5 1/4~5/16 0.39 0.39 0.63 2.13 0.87 3.66 0.9
F X-0421-10 8,800 4.0 3/8 0.51 0.47 0.87 3.0 31.1 45.0 41.7
X-0421-13 15,000 6.7 1/2 0.67 0.59 1.02 3.90 1.50 6.50 3.5
X-0421-16 22,600 10.0 5/8 0.83 0.71 1.30 4.49 1.77 7.68 6.0
X-0421-20 35,300 16.0 3/4 0.94 0.87 1.50 5.12 2.05 8.74 9.9
X-0421-22 42,700 19.0 7/8 1.06 0.98 1.65 5.47 2.20 9.72 12.3
* Design Factor 4:1 proof tested and certified.

28 TITAN 2014 / 2015 CATALOGUE

FITTINGS
SHACKLES

Screw Pin Shackles

- Capacities 1/3 thru 55 metric tons, - All shackles are Quenched and
grade 6. Tempered and can meet DNV impact
- Forged - Quenched and Tempered, requirements of 42 joules (31 ft. lbs.)
with alloy pins. at -20 degree C (-4 degree F).
- Working Load Limit and grade “6” - Meets or exceeds all requirements of
permanently shown on every shackle. ASME B30.26.
- Hot Dip galvanized or Self Colored. - Type Approval and certification in
- Fatigue rated. accordance with ABS 2006 Steel
- Shackles 25t and larger are RFID Vessel Rules 1-1-17.7, and ABS Guide
G-209 / S-209 EQUIPPED. for Certification of Cranes.
- Shackles can be furnished proof - Crosby 2t through 25t G209 anchor
tested with certificates to designated shackles are type approved to DNV
standards, such as ABS, DNV, Lloyds, Certification Notes 2.7-1 - Offshore
or other certification. Charges for proof Containers. These Crosby shackles
testing and certification available when are statistical proof and impact tested.
requested at the time of order. The tests are conducted by Crosby
and 3.1 test certification is available
G-209 Screw pin anchor shackles meet the - Approved for use at -40 degree C
performance requirements of Federal Specification
upon request.
(-40 degree F) to 204 degree C
RR-C-271F Type IVA, Grade A, Class 2, except for those
(400 degree F). - Look for the Red Pin® . . . the mark
provisions required of the contractor. of genuine Crosby quality.
- 2t through 25t bow and screw pin
are Certified to meet charpy impact
testing of 42 joules (31 ft-lbs.) min. ave.
at -20 degree C (-4 degree F).

G-209 / S-209 Screw Pin Anchor Shackles

Working Stock No. Dimensions (in.) Tolerance +/-
Nominal Load Weight
Size Limit G-209 S-209 Each A B C D E F G H L M P C A
(in.) (t)* (lbs)

3/16 1/3 1018357 – .06 .38 .25 .88 .19 .60 .56 .98 1.47 .16 1.14 .19 .06 .06
1/4 1/2 1018375 1018384 .10 .47 .31 1.13 .25 .78 .61 1.28 1.84 .19 1.43 .25 .06 .06
5/16 3/4 1018393 1018400 .18 .53 .38 1.22 .31 .84 .75 1.47 2.09 .22 1.71 .31 .06 .06
3/8 1 1018419 1018428 .31 .66 .44 1.44 .38 1.03 .91 1.78 2.49 .25 2.02 .38 .13 .06
7/16 1-1/2 1018437 1018446 .38 .75 .50 1.69 .44 1.16 1.06 2.03 2.91 .31 2.37 .44 .13 .06
1/2 2 1018455 1018464 .72 .81 .63 1.88 .50 1.31 1.19 2.31 3.28 .38 2.69 .50 .13 .06
5/8 3-1/4 1018473 1018482 1.37 1.06 .75 2.38 .63 1.69 1.50 2.94 4.19 .44 3.34 .69 .13 .06
3/4 4-3/4 1018491 1018507 2.35 1.25 .88 2.81 .75 2.00 1.81 3.50 4.97 .50 3.97 .81 .25 .06
7/8 6-1/2 1018516 1018525 3.62 1.44 1.00 3.31 .88 2.28 2.09 4.03 5.83 .50 4.50 .97 .25 .06
1 8-1/2 1018534 1018543 5.03 1.69 1.13 3.75 1.00 2.69 2.38 4.69 6.56 .56 5.13 1.06 .25 .06
1-1/8 9-1/2 1018552 1018561 7.41 1.81 1.25 4.25 1.16 2.91 2.69 5.16 7.47 .63 5.71 1.25 .25 .06
1-1/4 12 1018570 1018589 9.50 2.03 1.38 4.69 1.29 3.25 3.00 5.75 8.25 .69 6.25 1.38 .25 .06
1-3/8 13-1/2 1018598 1018605 13.53 2.25 1.50 5.25 1.42 3.63 3.31 6.38 9.16 .75 6.83 1.50 .25 .13
1-1/2 17 1018614 1018623 17.20 2.38 1.63 5.75 1.54 3.88 3.63 6.88 10.00 .81 7.33 1.62 .25 .13
1-3/4 25 1018632 1018641 27.78 2.88 2.00 7.00 1.84 5.00 4.19 8.86 12.34 1.00 9.06 2.25 .25 .13
2 35 1018650 1018669 45.00 3.25 2.25 7.75 2.08 5.75 4.81 9.97 13.68 1.22 10.35 2.40 .25 .13
2-1/2 55 1018678 1018687 85.75 4.13 2.75 10.50 2.71 7.25 5.69 12.87 17.84 1.38 13.00 3.13 .25 .25

TITAN 2014 / 2015 CATALOGUE 29

FITTINGS
SHACKLES

Screw Pin Shackles

- Capacities 1/3 thru 55 metric tons, - All shackles are Quenched and
grade 6. Tempered and can meet DNV impact
- Forged - Quenched and Tempered, requirements of 42 joules (31 ft. lbs.)
with alloy pins. at -20 degree C (-4 degree F).
- Working Load Limit and grade “6” - Meets or exceeds all requirements of
permanently shown on every shackle. ASME B30.26.
- Hot Dip galvanized or Self Colored. - Type Approval and certification in
- Fatigue rated. accordance with ABS 2006 Steel
- Shackles 25t and larger are RFID Vessel Rules 1-1-17.7, and ABS Guide
G-210 / S-210 for Certification of Cranes.
EQUIPPED.
- Shackles can be furnished proof - Crosby 2t through 25t G209 anchor
tested with certificates to designated shackles are type approved to DNV
standards, such as ABS, DNV, Lloyds, Certification Notes 2.7-1 - Offshore
or other certification. Charges for proof Containers. These Crosby shackles
testing and certification available when are statistical proof and impact tested.
requested at the time of order. The tests are conducted by Crosby
G-210 Screw pin chain shackles meet the performance and 3.1 test certification is available
- Approved for use at -40 degree C
requirements of Federal Specification RR-C-271F, Type upon request.
IVB, Grade A, Class 2, except for those provisions (-40 degree F) to 204 degree C
(400 degree F). - Look for the Red Pin® . . . the mark
required of the contractor.
of genuine Crosby quality.
- 2t through 25t bow and screw pin
are Certified to meet charpy impact
testing of 42 joules (31 ft-lbs.) min. ave.
at -20 degree C (-4 degree F).

G-210 / S-210 Screw Pin Chain Shackles

Working Stock No. Dimensions (in.) Tolerance +/-
Nominal Load Weight
Size Limit G-210 S-210 Each A B C D E F G K L M G A A
(in.) (t)* (lbs)

1/4 1/2 1019150 1019169 .11 .47 .31 .25 .25 .97 .62 .97 1.59 .19 1.43 .06 .06
5/16 3/4 1019178 1019187 .17 .53 .38 .31 .31 1.15 .75 1.07 1.91 .22 1.71 .06 .06
3/8 1 1019196 1019203 .28 .66 .44 .38 .38 1.42 .92 1.28 2.31 .25 2.02 .13 .06
7/16 1-1/2 1019212 1019221 .43 .75 .50 .44 .44 1.63 1.06 1.48 2.67 .31 2.37 .13 .06
1/2 2 1019230 1019249 .59 .81 .63 .50 .50 1.81 1.18 1.66 3.03 .38 2.69 .13 .06
5/8 3-1/4 1019258 1019267 1.25 1.06 .75 .63 .63 2.32 1.50 2.04 3.76 .44 3.34 .13 .06
3/4 4-3/4 1019276 1019285 2.63 1.25 .88 .81 .75 2.75 1.81 2.40 4.53 .50 3.97 .25 .06
7/8 6-1/2 1019294 1019301 3.16 1.44 1.00 .97 .88 3.20 2.10 2.86 5.33 .50 4.50 .25 .06
1 8-1/2 1019310 1019329 4.75 1.69 1.13 1.00 1.00 3.69 2.38 3.24 5.94 .56 5.13 .25 .06
1-1/8 9-1/2 1019338 1019347 6.75 1.81 1.25 1.25 1.13 4.07 2.69 3.61 6.78 .63 5.71 .25 .06
1-1/4 12 1019356 1019365 9.06 2.03 1.38 1.38 1.25 4.53 3.00 3.97 7.50 .69 6.25 .25 .13
1-3/8 13-1/2 1019374 1019383 11.63 2.25 1.50 1.50 1.38 5.01 3.31 4.43 8.28 .75 6.53 .25 .13
1-1/2 17 1019392 1019409 15.95 2.38 1.63 1.62 1.50 5.38 3.62 4.87 9.05 .81 7.33 .25 .13
1-3/4 25 1019418 1019427 26.75 2.88 2.00 2.12 1.75 6.38 4.19 5.78 10.97 1.00 9.06 .25 .13
2 35 1019436 1019445 42.31 3.25 2.25 2.36 2.10 7.25 5.00 6.77 12.74 1.13 10.35 .25 .13
2-1/2 55 1019454 1019463 71.75 4.12 2.75 2.63 2.63 9.38 5.68 8.07 14.85 1.38 13.00 .25 .25

* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit.

30 TITAN 2014 / 2015 CATALOGUE

FITTINGS
SHACKLES

Alloy Pin Shackles

- Capacities 2 thru 21 metric tons. - Approved for use at -40 degree C
Meets performance requirements (-40 degree F) to 204 degree C
of Grade 8 shackles. (400 degree F).
- Forged Alloy Steel – Quenched and - Meets or exceeds all requirements of
Tempered, with alloy pins. ASME B30.26 including identification,
- Working Load Limit permanently ductility, design factor, proof load and
shown on every shackle. temperature requirements. Importantly,
- Hot Dip Galvanized. these shackles meet other critical
- Shackles can be furnished proof performance requirements including
tested with certificates to designated fatigue life, impact properties and
material traceability, not addressed
G-209A standards, such as ABS, DNV, Lloyds,
by ASME B30.26.
or other certification. Charges for proof
testing and certification available when
requested at the time of order.

G-209A Screw pin anchor shackles meet the

performance requirements of Federal Specification
RR-C-271F Type IVA, Grade B, Class 2, except for those
provisions required of the contractor.

G-209A Crosby® Alloy Screw Pin Shackles

Working Dimensions (in.) Tolerance +/-
Nominal Load G-209AA Weight
Size Limit Stock No. Each A B C D E F G H L M P C A
(in.) (t)* (lbs)

3/8 2 1017450 .31 .66 .44 1.44 .38 1.03 .91 1.78 2.49 .25 2.03 .38 .13 .06
7/16 2-2/3 1017472 .38 .75 .50 1.69 .44 1.16 1.06 2.03 2.91 .31 2.38 .44 .13 .06
1/2 3-1/3 1017494 .63 .81 .63 1.88 .50 1.31 1.19 2.31 3.28 .38 2.69 .50 .13 .06
5/8 5 1017516 1.38 1.06 .75 2.38 .63 1.69 1.50 2.94 4.19 .44 3.34 .69 .13 .06
3/4 7 1017538 2.35 1.25 .88 2.81 .75 2.00 1.81 3.50 4.97 .50 3.97 .81 .25 .06
7/8 9-1/2 1017560 3.61 1.44 1.00 3.31 .88 2.28 2.09 4.03 5.83 .50 4.50 .97 .25 .06
1 12-1/2 1017582 5.32 1.69 1.13 3.75 1.00 2.69 2.38 4.69 6.56 .56 5.07 1.06 .25 .06
1-1/8 15 1017604 7.25 1.81 1.25 4.25 1.16 2.91 2.69 5.16 7.47 .63 5.59 1.25 .25 .06
1-1/4 18 1017626 9.88 2.03 1.38 4.69 1.29 3.25 3.00 5.75 8.25 .69 6.16 1.38 .25 .06
1-3/8 21 1017648 13.25 2.25 1.50 5.25 1.42 3.63 3.31 6.38 9.16 .75 6.84 1.50 .25 .13

* Maximum Proof Load is 2 times the Working Load Limit (metric tons) and 2.2 times the Working Load Limit (short tons). Minimum Ultimate Strength is 4.5 times the Working Load Limit for metric tonnes,
and 5 times the Working Load Limit for short tons.

TITAN 2014 / 2015 CATALOGUE 31

FITTINGS
SHACKLES

Green Pin® Standard Shackles bow shackles with screw collar pin
- Material: bow and pin high tensile steel, - Certification: at no extra charges this
Grade 6, quenched and tempered product can be supplied with a works
- Safety Factor: MBL equals 6 x WLL certificate, 3.1 material certificate,
- Standard: EN 13889 and meets manufacturer test certificate, EC
performance requirements of US Fed. Declaration of Conformity and all
Spec. RR-C-271 Type IVA Class 2, shackles starting from 2 t can be
Grade A supplied with DNV 2.7-1 certificate.
- Finish: hot dipped galvanized - Note: for details on dimensions and
- Temperature Range: -20°C up to tolerances please consult our CAD
G-4161 +200°C drawings, these are available on
request.
working diameter diameter diameter width width length width length weight
load limit bow pin eye eye inside inside bow length bolt width each
a b c d e f g h i j
t mm mm mm mm mm mm mm mm mm mm kg

0.33 5 6 12 5 9.5 22 16 36 29.5 26 0.02

0.5 7 8 16.5 7 12 29 20 48.5 38 34 0.05
0.75 9 10 20 9 13.5 32 22 56 46.5 40 0.1
1 10 11 22.5 10 17 36.5 26 63.5 54 46 0.14
1.5 11 13 26.5 11 19 43 29 74 59.5 51 0.19
2 13.5 16 34 13 22 51 32 89 73 58 0.36
3.25 16 19 40 16 27 64 43 110 89 75 0.63
4.75 19 22 46 19 31 76 51 129 103 89 1.01
6.5 22 25 52 22 36 83 58 144 119 102 1.5
8.5 25 28 59 25 43 95 68 164 137 118 2.21
9.5 28 32 66 28 47 108 75 185 153 131 3.16
12 32 35 72 32 51 115 83 201 170 147 4.31
13.5 35 38 80 35 57 133 92 227 186 162 5.55
17 38 42 88 38 60 146 99 249 203 175 7.43
25 45 50 103 45 74 178 126 300 243 216 12.84
35 50 57 111 50 83 197 138 331 272 238 18.15
42.5 57 65 130 57 95 222 160 377 310 274 26.29
55 65 70 145 65 105 260 180 433 344 310 37.6

working diameter diameter diameter width width length width length weight
load limit bow pin eye eye inside inside bow length bolt width each
a b c d e f g h i j
t inch inch inch inch inch inch inch inch inch inch lbs

0.33 3/16 1/4 1/2 3/16 3/8 7/8 5/8 1 13/32 1 5/32 1 1/32 0.05
0.5 1/4 5/16 21/32 9/32 15/32 1 5/32 25/32 1 29/32 1 1/2 1 11/32 0.11
0.75 5/16 3/8 25/32 11/32 17/32 1 1/4 7/8 2 7/32 1 27/32 1 9/16 0.22
1 3/8 7/16 7/8 13/32 21/32 1 7/16 1 1/32 2 1/2 2 1/8 1 13/16 0.3
1.5 7/16 1/2 1 1/32 7/16 3/4 1 11/16 1 5/32 2 29/32 2 11/32 2 0.42
2 1/2 5/8 1 11/32 1/2 7/8 2 1 1/4 3 1/2 2 7/8 2 9/32 0.79
3.25 5/8 3/4 1 9/16 5/8 1 1/16 2 17/32 1 11/16 4 11/32 3 1/2 2 15/16 1.38
4.75 3/4 7/8 1 13/16 3/4 1 7/32 3 2 5 3/32 4 1/16 3 1/2 2.22
6.5 7/8 1 2 1/16 7/8 1 13/32 3 9/32 2 9/32 5 21/32 4 11/16 4 1/32 3.31
8.5 1 1 1/8 2 5/16 31/32 1 11/16 3 3/4 2 11/16 6 15/32 5 13/32 4 21/32 4.86
9.5 1 1/8 1 1/4 2 19/32 1 3/32 1 27/32 4 1/4 2 15/16 7 9/32 6 1/32 5 5/32 6.97
12 1 1/4 1 3/8 2 27/32 1 1/4 2 4 17/32 3 9/32 7 29/32 6 11/16 5 25/32 9.49
13.5 1 3/8 1 1/2 3 5/32 1 3/8 2 1/4 5 1/4 3 5/8 8 15/16 7 5/16 6 3/8 12.24
17 1 1/2 1 5/8 3 15/32 1 1/2 2 3/8 5 3/4 3 29/32 9 13/16 8 6 7/8 16.37
25 1 3/4 2 4 1/16 1 25/32 2 29/32 7 4 31/32 11 13/16 9 9/16 8 1/2 28.31
35 2 2 1/4 4 3/8 1 31/32 3 9/32 7 3/4 5 7/16 13 1/32 10 23/32 9 3/8 40.01
42.5 2 1/4 2 9/16 5 1/8 2 1/4 3 3/4 8 3/4 6 5/16 14 27/32 12 7/32 10 25/32 57.96
55 2 1/2 2 3/4 5 23/32 2 9/16 4 1/8 10 1/4 7 3/32 17 1/16 13 17/32 12 7/32 82.89

32 TITAN 2014 / 2015 CATALOGUE

* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit.
† Individually Proof Tested with certification.
‡ Furnished in Anchor style only and furnished with Round Head Bolts with welded handles.

TITAN 2014 / 2015 CATALOGUE 35

FITTINGS
SHACKLES

G-2130A Alloy Bolt Type Shackles Grade 80

- Capacities 2 to 17 metric tons. - Shackles can be furnished proof tested
- Working Load Limit permanently shown with certificates to designated standards,
on every shackle. such as ABS,
- Forged Alloy Steel – Quenched and - DNV, Lloyds, or other certification when
Tempered, with bow and bolt. requested at time of order.
- Hot Dip galvanized. - Type Approval and certification in
accordance with DNV Type Approval
- Shackles can be RFID EQUIPPED.
under DNV 2.7-1.
- Meets or exceeds all requirements of
- Shackles are Quenched and Tempered
G-2130A ASME B30.26 including identification,
and meets DNV impact requirements
ductility, design factor, proof load and
of 42 joules (31 ft. Ibs.) at 40 degree C
temperature requirements. Importantly,
(-40 degree F).
these shackles meet other critical
performance requirements including
impact properties and material
traceability, not addressed by ASME
B30.26.

G-2130A Alloy Bolt Type Shackles Grade 80

Working
Dimensions (in.) Tolerance +/-
Nominal Load G-2130A Weight
Size Limit Stock No. Each A B C D E F H L N C A
(in.) (t)* (lbs)

1/2 2 1219472 .79 .81 .63 1.88 0.50 1.31 1.19 3.29 2.30 0.50 0.13 0.06
5/8 3-1/4 1219491 1.37 1.06 .75 2.38 0.63 1.69 1.50 4.18 2.94 0.69 0.25 0.06
3/4 4-3/4 1219516 2.71 1.25 .88 2.82 0.75 2.01 1.81 4.96 3.51 0.81 0.25 0.06
7/8 6-1/2 1219534 3.95 1.44 1.00 3.31 0.88 2.29 2.09 5.83 4.02 0.97 0.25 0.06
1 8-1/2 1219552 5.03 1.69 1.10 3.76 1.00 2.70 2.38 6.58 4.69 1.06 0.25 0.06
1-1/8 9-1/2 1219578 8.27 1.81 1.25 4.26 1.13 2.92 2.70 7.49 5.16 1.25 0.25 0.06
1-1/4 12 1219598 11.7 2.03 1.38 4.69 1.25 3.25 2.99 8.27 5.75 1.38 0.25 0.06
1-3/8 13-1/2 1219614 15.8 2.25 1.50 5.24 1.38 3.62 3.31 9.18 6.38 1.50 0.25 0.13
1-1/2 17 1219632 19.0 2.38 1.63 5.75 1.50 3.88 3.62 10.0 6.90 1.62 0.25 0.13

* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 8 times the Working Load Limit.

36 TITAN 2014 / 2015 CATALOGUE

FITTINGS
SHACKLES

Green Pin® Standard Shackles bow shackles with safety bolt

- Material: bow and pin high tensile steel, product can be supplied with a works
Grade 6, quenched and tempered certificate, 3.1 material certificate,
- Safety Factor: MBL equals 6 x WLL manufacturer test certificate, EC
- Standard: EN 13889 and meets Declaration of Conformity and all
performance requirements of US Fed. shackles starting from 2 t can be
Spec. RR-C-271 Type IVA Class 3, Grade A supplied with DNV 2.7-1 certificate.
- Finish: hot dipped galvanized - Note: for details on dimensions and
- Temperature Range: -20°C up to +200°C tolerances please consult our CAD
- Certification: at no extra charges this drawings, these are available on request.
G-4163
working diameter diameter diameter width width length width length thickness weight
load limit bow pin eye eye inside inside bow length bolt width nut each
a b c d e f g h i j k
t mm mm mm mm mm mm mm mm mm mm mm kg

0.5 7 8 16.5 7 12 29 20 48.5 42 34 4 0.06

0.75 9 10 20 9 13.5 32 22 56 50 40 5 0.11
1 10 11 22.5 10 17 36.5 26 63.5 60 46 8 0.16
1 .5 11 13 26.5 11 19 43 29 74 67 51 11 0.22
2 13.5 16 34 13 22 51 32 89 82 58 13 0.42
3.25 16 19 40 16 27 64 43 110 98 75 17 0.74
4.75 19 22 46 19 31 76 51 129 114 89 19 1.18
6.5 22 25 52 22 36 83 58 144 130 102 22 1.77
8.5 25 28 59 25 43 95 68 164 150 118 25 2.58
9.5 28 32 66 28 47 108 75 185 166 131 27 3.66
12 32 35 72 32 51 115 83 201 178 147 30 4.91
13.5 35 38 80 35 57 133 92 227 197 162 33 6.54
17 38 42 88 38 60 146 99 249 202 175 19 8.19
25 45 50 103 45 74 178 126 300 249 216 23 14.22
35 50 57 111 50 83 197 138 331 269 238 26 19.85
42.5 57 65 130 57 95 222 160 377 301 274 29 28.33
55 65 70 145 65 105 260 180 433 330 310 32 39.59
85 75 83 162 73 127 329 190 527 380 340 39 62

working diameter diameter diameter width width length width length thickness weight
load limit bow pin eye eye inside inside bow length bolt width nut each
a b c d e f g h i j k
t inch inch inch inch inch inch inch inch inch inch inch lbs

0.5 1/4 5/16 21/32 9/32 15/32 1 5/32 25/32 1 29/32 1 21/32 1 11/32 5/32 0.13
0.75 5/16 3/8 25/32 11/32 17/32 1 1/4 7/8 2 7/32 1 31/32 1 9/16 3/16 0.25
1 3/8 7/16 7/8 13/32 21/32 1 7/16 1 1/32 2 1/2 2 3/8 1 13/16 5/16 0.34
1.5 7/16 1/2 1 1/32 7/16 3/4 1 11/16 1 5/32 2 29/32 2 5/8 2 7/16 0.48
2 1/2 5/8 1 11/32 1/2 7/8 2 1 1/4 3 1/2 3 7/32 2 9/32 1/2 0.92
3.25 5/8 3/4 1 9/16 5/8 1 1/16 2 17/32 1 11/16 4 11/32 3 27/32 2 15/16 21/32 1.62
4.75 3/4 7/8 1 13/16 3/4 1 7/32 3 2 5 3/32 4 1/2 3 1/2 3/4 2.59
6.5 7/8 1 2 1/16 7/8 1 13/32 3 9/32 2 9/32 5 21/32 5 1/8 4 1/32 7/8 3.9
8.5 1 1 1/8 2 5/16 31/32 1 11/16 3 3/4 2 11/16 6 15/32 5 29/32 4 21/32 31/32 5.69
9.5 1 1/8 1 1/4 2 19/32 1 3/32 1 27/32 4 1/4 2 15/16 7 9/32 6 17/32 5 5/32 1 1/16 8.06
12 1 1/4 1 3/8 2 27/32 1 1/4 2 4 17/32 3 9/32 7 29/32 7 5 25/32 1 3/16 10.81
13.5 1 3/8 1 1/2 3 5/32 1 3/8 2 1/4 5 1/4 3 5/8 8 15/16 7 3/4 6 3/8 1 5/16 14.42
17 1 1/2 1 5/8 3 15/32 1 1/2 2 3/8 5 3/4 3 29/32 9 13/16 7 15/16 6 7/8 3/4 18.06
25 1 3/4 2 4 1/16 1 25/32 2 29/32 7 4 31/32 11 13/16 9 13/16 8 1/2 29/32 31.34
35 2 2 1/4 4 3/8 1 31/32 3 9/32 7 3/4 5 7/16 13 1/32 10 19/32 9 3/8 1 1/32 43.77
42.5 2 1/4 2 9/16 5 1/8 2 1/4 3 3/4 8 3/4 6 5/16 14 27/32 11 27/32 10 23/32 1 5/32 62.46
55 2 1/2 2 3/4 5 23/32 2 9/16 4 1/8 10 1/4 7 3/32 17 1/16 13 12 7/32 1 1/4 87.27
85 3 3 1/4 6 3/8 2 7/8 5 12 15/16 7 15/32 20 3/4 14 31/32 13 3/8 1 17/32 136.69

TITAN 2014 / 2015 CATALOGUE 37

FITTINGS
SHACKLES

G-2160 / S-2160 “WIDE BODY” SHACKLES

- All sizes Quenched and Tempered for maximum and greatly improves life of wire rope slings.
strength. - Pin is non-rotating, with weld-on handles for
- Forged alloy steel from 7 through 300 metric tons. easier use (75t and larger).
- Cast alloy steel from 400 through 1550 metric tons. - Approved for use at -40 degree C (-40 degree F)
- Sizes 300 metric tons and smaller are proof to 204 degree C (400 degree F).
tested to 2 times the Working Load Limit. - Bow and bolt are Certified to meet charpy
- Sizes 400 metric tons and larger are tested to impact testing of 42 joules (31 ft-lbs.) min. ave.
1.33 times Working Load Limit. at -20 degree C (-4 degree F).
- All ratings are in metric tons, embossed on side - All 2160 shackles are individually proof tested
of bow. and magnetic particle inspected. Crosby
Patented
- G-2160, (7-55t), are Hot Dip Galvanized and pins certification available at time of order.
are painted red. - Shackles requiring ABS, Lloyds and other
- G-2160, (75t and larger), bows are furnished certifications are available upon special request
Dimetcoted, and pins are Dimetcoted, then and must be specified at time of order.
painted red. - Shackles 18t and larger have DNV Type
P K J - S-2160 bows and pins are painted red. Approval to Rules for Certification of Lifting
G

- Shackles, 30t and larger, are RFID EQUIPPED. Appliances, and are produced in accordance
with DNV MSA requirements. Databook is
- Can be used to connect HIGH STRENGTH
H
R provided that includes required documents.
F Synthetic Web Slings, HIGH STRENGTH
D
Synthetic Round Slings or Wire Rope Slings. - Serialization / Identification
B
A
C E
- Increase in shackle bow radius provides - Material Testing (Physical / Chemical / Charpy)
minimum 58% gain in sling bearing surface and - Proof Testing
eliminates need for a thimble. - Look for the Red Pin® . . . the mark of genuine
- Increases usable sling strength minimum of 15% Crosby quality.

G-2160E / S-2160E Crosby® Easy-Loc “Wide Body” Shackles

Working Stock No. Dimensions (in.) Efffective
Load Weight Body
Limit G-2160E S-2160E Each A B C D E F G H J K P R Diameter A
(t)* (lbs) +/- .25 +/- .02

125 1021309 – 178 16.75 5.12 3.50 3.15 6.50 1.19 3.75 14.36 5.91 4.33 15.47 23.00 6.8
200 1021320 – 401 19.76 5.91 4.94 4.12 8.41 1.75 5.25 18.90 8.63 5.41 20.47 30.44 9.5
300 1021330 – 777 23.05 7.38 5.63 5.25 10.50 1.75 6.13 23.63 10.38 6.31 23.83 37.51 11.4

G-2160 / S-2160 Crosby® “Wide Body” Shackles

Working Stock No. Dimensions (in.) Efffective
Load Weight Body
Limit G-2160 S-2160 Each A B C D E G H J K P R Diameter A
(t)* (lbs) +/- .25 +/- .02

7 1021256 1021548 4.0 4.14 1.25 .69 .88 1.82 1.25 3.56 1.60 1.25 4.10 5.87 2.1
12.5 1021265 1021557 8.80 5.38 1.69 .92 1.13 2.38 1.37 4.63 2.13 1.63 5.51 7.63 2.4
18 1021274 1021566 14.90 6.69 2.03 1.16 1.38 2.69 1.50 5.81 2.50 2.00 6.76 9.38 2.8
30 1021283 1021575 26.50 7.69 2.37 1.38 1.63 3.50 2.50 6.94 3.13 2.50 8.50 11.38 4.1
40 1021285 1021584 46.00 9.28 2.88 1.69 2.00 4.00 1.75 8.06 3.75 3.00 10.62 13.62 3.6
55 1021287 1021593 68.00 10.36 3.25 2.00 2.25 4.63 2.63 9.36 4.50 3.50 12.26 15.63 4.3
75 1021290 – 99.00 14.37 4.13 2.12 2.75 5.34 2.50 11.53 4.75 3.64 12.64 18.66 5.0
400 1021334 – 1130 30.27 8.66 5.16 6.30 11.81 6.30 22.64 12.60 7.28 27.17 38.78 14.3
500 1021343 – 1440 33.35 9.84 5.73 7.09 13.39 6.69 24.81 13.39 8.86 31.10 42.72 14.8
600 1021352 – 1995 36.02 10.83 6.23 7.87 15.50 7.28 27.56 14.57 9.74 34.06 47.24 20.3
700 1021361 – 2415 38.91 11.81 6.59 8.46 14.80 7.87 28.94 15.75 10.63 37.01 50.18 16.6
800 1021254 – 2880 41.66 12.80 7.30 9.06 16.54 8.27 29.53 16.54 10.92 38.39 52.09 18.0
900 1021389 – 3628 43.73 13.78 7.78 9.84 16.93 8.66 29.82 17.32 11.52 40.35 54.04 22.4
1000 1021370 – 4155 45.98 14.96 8.33 10.63 17.72 9.06 29.92 18.11 12.11 42.32 55.31 19.3
1250 1021272 – 5320 49.86 16.93 9.15 11.81 21.00 10.43 36.61 20.87 12.70 46.26 65.35 24.4
1550 1021281 – 8302 54.89 18.31 10.58 12.60 23.82 15.92 42.32 22.82 13.29 49.41 73.43 27.3
* 7t-300t Proof Load is 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. 400t-1550t Proof Load is 1.33 times the Working Load Limit. Ultimate Load is 4.5 times the Working Load Limit.

38 TITAN 2014 / 2015 CATALOGUE

FITTINGS
SHACKLES

Green Pin® Heavy Duty Polar Shackles

bow shackles with safety bolt, for use under extreme climatic conditions
- Material: bow and pin alloy steel, - Certification: at no extra charges this
Grade 8, quenched and tempered product can be supplied with works
- Safety Factor: MBL equals 5 x WLL certificate, 3.1 material certificate,
- Finish: shackle bow painted silver, manufacturer test certificate and/or EC
pin painted green (120 tons shackle Declaration of Conformity. All shackles
is hot dipped galvanized) starting from 150 tons are supplied with
- Temperature Range: -40 °C up to a Lloyd’s Register of Shipping Certificate
+200 °C on proof load

G-6031

working diameter diameter diameter width width length width length thickness weight
load limit bow pin eye eye inside inside bow length bolt width nut each
a b c d e f g h i j k
t mm mm mm mm mm mm mm mm mm mm mm kg

120 95 95 208 91 147 400 238 647 440 428 50 110

150 105 108 238 102 169 410 275 688 490 485 60 160
200 120 130 279 113 179 513 290 838 520 530 60 235
250 130 140 299 118 205 554 305 904 560 565 65 285
300 140 150 325 123 205 618 305 996 575 585 70 340
400 170 175 376 164 231 668 325 1114 690 665 70 560
500 180 185 398 164 256 718 350 1190 720 710 70 685
600 200 205 444 189 282 718 375 1243 810 775 70 880
700 210 215 454 204 308 718 400 1263 870 820 70 980
800 210 220 464 204 308 718 400 1270 870 820 70 1100
900 220 230 485 215 328 718 420 1296 920 860 70 1280
1000 240 240 515 215 349 718 420 1336 940 900 70 1460
1250 260 270 585 230 369 768 450 1456 1025 970 70 1990
1500 280 290 625 230 369 818 450 1556 1025 1010 70 2400

120 3 3/4 3 3/4 8 3 /16 3 19/32 5 25/32 15 3/4 9 3/8 25 15/32 17 5/16 16 27/32 1 31/32 243
150 4 1/8 4 1/4 9 3/8 4 1/32 6 21/32 16 5/32 10 13/16 27 3/32 19 9/32 19 3/32 2 3/8 353
200 4 23/32 5 1/8 10 31/32 4 7/16 7 1/16 20 3/16 11 13/32 33 20 15/32 20 7/8 2 3/8 518
250 5 1/8 5 1/2 11 25/32 4 21/32 8 1/16 21 13/16 12 35 19/32 22 1/16 22 1/4 2 9/16 628
300 5 1/2 5 29/32 12 25/32 4 27/32 8 1/16 24 11/32 12 39 7/32 22 5/8 23 1/32 2 3/4 750
400 6 11/16 6 7/8 14 13/16 6 15/32 9 3/32 26 5/16 12 25/32 43 27/32 27 5/32 26 3/16 2 3/4 1235
500 7 3/32 7 9/32 15 21/32 6 15/32 10 3/32 28 9/32 13 25/32 46 27/32 28 11/32 27 15/16 2 3/4 1510
600 7 7/8 8 1/16 17 15/32 7 7/16 11 3/32 28 9/32 14 3/4 48 15/16 31 7/8 30 1/2 2 3/4 1940
700 8 9/32 8 15/32 17 7/8 8 1/32 12 1/8 28 9/32 15 3/4 49 23/32 34 1/4 32 9/32 2 3/4 2161
800 8 9/32 8 21/32 18 9/32 8 1/32 12 1/8 28 9/32 15 3/4 50 34 1/4 32 9/32 2 3/4 2425
900 8 21/32 9 1/16 19 3/32 8 15/32 12 29/32 28 9/32 16 17/32 51 1/32 36 7/32 33 27/32 2 3/4 2822
1000 9 7/16 9 7/16 20 9/32 8 15/32 13 3/4 28 9/32 16 17/32 52 19/32 37 35 7/16 2 3/4 3219
1250 10 1/4 10 5/8 23 1/32 9 1/16 14 17/32 30 1/4 17 23/32 57 5/16 40 11/32 38 3/16 2 3/4 4387
1500 11 1/32 11 13/32 24 19/32 9 1/16 14 17/32 32 7/32 17 23/32 61 1/4 40 11/32 39 3/4 2 3/4 5291

TITAN 2014 / 2015 CATALOGUE 39

FITTINGS
SHACKLES

G-2170 Grommet Shackle

- All sizes Quenched and Tempered for - Increases usable sling strength minimum
P
maximum strength. of 60% and greatly improves life of
- All sizes cast alloy steel. grommet slings.
- Sizes 300 metric tons and smaller are - Bow and bolt are certified to meet charpy
proof tested to 2 times the Working Load impact testing of 42 joules (31 ftlbs.) min.
HR Limit. ave. at -20 degree C (-4 degree F).
F - All ratings are in metric tons, embossed - All 2170 shackles are individually proof
D on side of bow. tested and magnetic particle inspected.
- G-2170 bows are furnished Dimetcoted Crosby certification available at time of
B order.
C and pins are Dimetcoted, then painted
A red. - Shackles requiring ABS, Lloyds, and
J - All sizes are RFID Equipped in bow and other certifications are available upon
pin special request and must be specified at
- Designed for use with single or double time of order.
large diameter grommets. - All 2170 shackles can meet requirements
- Extra large sling contact area improves of DNV Standard for Certification of
efficiency of the grommet sling. Lifting Appliances upon special request
and must be specified at time of order.
- Utilizes new Crosby Easy-Loc shackle
bolt system - Serialization / Identification
- Large machined flat on ears that can be - Material Testing (Physical / Chemical /
E drilled and tapped for adapting other Charpy)
accessories. - Proof Testing
- HR-1000 Hoist Ring in Bow available for - Look for the Red Pin®….the mark of
easy transporting genuine Crosby quality.
- Provides a bearing surface that is at least
5 times that of a round shackle.

G-2170 Crosby® Grommet Shackles

Working Dimensions (in.) Efffective
Load Stock No. Weight Body
Limit G-2170 Each A B C D E F H J P R Diameter A
(t)* (lbs) +/- .25 +/- .02

75 1022075 113 14.08 4.13 2.39 2.75 5.50 1.19 7.77 7.50 9.50 16.20 11.25
125 1022084 176 16.05 5.13 2.75 3.15 6.72 1.19 9.31 9.00 11.00 19.25 13.50
200 1022093 368 19.13 5.91 3.39 4.12 9.00 1.75 11.64 12.90 13.63 25.01 18.45
300 1022100 686 22.44 7.38 4.30 5.25 11.13 1.75 15.20 15.50 17.00 31.82 22.75
* Sizes 75-300 metric tons are proof tested to 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. Ultimate Load is 4.5 times the Working Load Limit.

40 TITAN 2014 / 2015 CATALOGUE

FITTINGS
HOOKS

Shackle Swivel Self Hook, with brass bushing. Code “EH”

W
Working For Grade
Item No. Load Limit 80 Chain Dimensions (inch) N.W.
D
Lbs* tonnes* inch B D K P T H W Lbs
B
8-020-07 4,500 2.0 9/16~5/8 1.77 0.75 8.03 1.34 0.79 0.94 0.83 3.1
8-020-10 7,100 3.15 3/4 2.36 0.79 9.57 1.77 1.02 1.19 1.06 6.0

K
8-020-13 12,000 5.3 7/8~1 2.95 0.87 12.09 2.13 1.19 1.57 1.34 11.5
P
* Design Factor 4:1 proof tested and certified.
Tested ace. to DIN EN 1677-1

H
T
This hook is a positioning device and is not intended to rotate under load.

D
Shackle Swivel Self Hook, with ball bearing. Code “EHN”
Ball bearing performs to fully under load
B
Working For Grade
Item No. Load Limit 80 Chain Dimensions (inch) N.W.
Lbs* tonnes* inch B D K P T H W Lbs
K
P 8-020N-07 4,500 2.0 9/16~5/8 1.77 0.75 8.03 1.34 0.79 0.94 0.83 3.1
8-020N-10 7,100 3.15 3/4 2.36 0.79 9.57 1.77 1.02 1.19 1.06 6.2
8-020N-13 12,000 5.3 7/8~1 2.95 0.87 12.09 2.13 1.19 1.57 1.34 11.7
* Design Factor 4:1 proof tested and certified.
H
Tested ace. to DIN EN 1677-1
T

w
Shackle Swivel Self Hook, with brass bushing. Code “EHY”
D Working For Grade
Item No. Load Limit 80 Chain Dimensions (inch) N.W.
B Lbs* tonnes* inch B D K P T H W Lbs

8-021-07 4,500 2.0 9/16~5/8 1.77 0.75 6.77 1.02 0.71 0.87 0.83 2.4
K 8-021-10 7,100 3.15 3/4 2.36 0.79 8.43 1.42 0.91 1.14 1.06 5.1
P 8-021-13 12,000 5.3 7/8~1 2.95 0.87 10.43 1.65 1.10 1.38 1.34 9.5
* Design Factor 4:1 proof tested and certified.
Tested ace. to DIN EN 1677-1
H

T
This hook is a positioning device and is not intended to rotate under load.

D Shackle Swivel Self Hook, with ball bearing. Code “EHYN”

Ball bearing performs to fully swivel under load
B
Working For Grade
Item No. Load Limit 80 Chain Dimensions (inch) N.W.
Lbs* tonnes* inch B D K P T H W Lbs
K
P 8-021N-07 4,500 2.0 9/16~5/8 1.77 0.75 6.77 1.02 0.71 0.87 0.83 2.4
8-021N-10 7,100 3.15 3/4 2.36 0.79 8.43 1.42 0.91 1.14 1.06 5.1
8-021N-13 12,000 5.3 7/8~1 2.95 0.87 10.43 1.65 1.10 1.38 1.34 9.7
H * Design Factor 4:1 proof tested and certified.
T Tested ace. to DIN EN 1677-1

TITAN 2014 / 2015 CATALOGUE 41

FITTINGS
HOOKS

YOKE “BSI” Insulated Swivels and Fittings

- The perfect system for universal coupling of components to chain, wire rope and
synthetic slings.
- Heavy hoisting with a strong but lightweight system. All components are forged high alloy
steel compatible with forged chain and fittings.
- Assembly is fast and easy with only a hammer required.
- Individual swivels & components are 100% proof load tested to a minimum of 2.5 times
the working load limit.
- All “BSI” Swivels are individually tested during manufacturing to assure insulating
properties. A insulated test certificate is packaged with each unit shipped.
- YOKE “BSI” Insulated Swivels are designed with ball bearing which performs to fully
swivel under Load.
- Acquired certificate approved by BG German company.

42 TITAN 2014 / 2015 CATALOGUE

FITTINGS
HOOKS

Coupling Self Locking Hook. Code “YL”

Working For Grade
Item No. Load Limit 80 Chain Dimensions (inch) N.W.
Lbs* tonnes* inch K P T H Lbs

8-023-06 2,100 1.12 7/32 4.12 1.14 0.59 0.75 1.1

8-023-07 4,500 2.0 1/4~5/16 5.35 1.34 0.79 0.94 1.8
K 8-023-10 7,100 3.15 3/8 6.06 1.77 1.02 1.19 3.1
8-023-13 12,000 5.3 1/2 7.95 2.13 1.19 1.57 6.4
8-023-16 18,100 8.0 5/8 9.53 2.44 1.42 1.93 11.9

H
8-023-20 28,300 12.5 3/4 10.12 3.54 1.91 2.36 17.9
8-023-22 34,200 15.0 7/8 11.97 3.15 2.12 2.48 24.7
T
8-023-26 47,700 21.2 1 12.95 3.90 2.20 2.72 32.2
* Design Factor 4:1 proof tested and certified. Tested ace. to DIN EN 1677-1

YOKE’s innovative, fine design with “Coupling Pin” system hook is able to solve any of your
problems in Chain, Wire Rope and Synthetic Slings.

The hook:
1. Create safer lifting with the use of “ Self Locking “ system.
2. Assembly is fast and easy with only a hammer required.
3. Acquired certificate approved by BG German company.
4. Patent: Taiwan, China, France, Germany, Italy, Japan,USA, UK, Switzerland, and Sweden.

TITAN 2014 / 2015 CATALOGUE 43

FITTINGS
HOOKS

Swivel Safety Hook BKL

Art. no. Code WLL L B C E A G H Weight
(tonnes*) (kg)

Z101114 BKL-6-10 1.5 149 29 23 33 11 15 21 0.7

Z101104 BKL-7/8-10 2.5 183 37 27 38 12 17 26 1.2
Z101028 BKL-10-10 4 218 45 37 44 15 21 31 2.0
Z101036 BKL-13-10 6.7 282 55 49 48 19 30 40 4.0
Z101044 BKL-16-10 10 341 62 65 61 25 37 50 7.2
Z101093 BKL-18/20-10 16 368 68 70 72 31 44 62 11.4

Swivel Safety Hook BKLK with ball-bearing

Art. no. Code WLL L B C E A G H Weight
(tonnes*) (kg)

Z101116 BKLK-6-10 1.5 149 29 24 33 11 15 21 0.7

Z101106 BKLK-7/8-10 2.5 183 37 27 38 12 17 26 1.2
Z101030 BKLK-10-10 4 218 45 35 44 15 21 31 2.0
Z101038 BKLK-13-10 6.7 280 55 45 48 19 30 40 4.0
Z101046 BKLK-16-10 10 339 62 63 61 25 37 50 7.4
Z101095 BKLK-18/20-10 16 368 68 59 72 31 44 62 11.5
Z101294 BKLK-22-10 OS 20 436 79 80 80 35 50 62 16.8
Z101295 BKLK-26-10 27 486 100 110 102 45 54 68 26

Swivel Safety Hook with Griplatch LBK

Art. no. Code WLL L B C E A G H Weight
(tonnes*) (kg)

Z100978 LBK-7/8-10 2.5 177 37 27 38 12 20 22 1.1

Z100960 LBK-10-10 4 214 47 37 44 15 22 29 2.0
Z100993 LBK-13-10 6.7 262 53 45 48 19 29 38 3.8
Z100995 LBK-16-10 10 324 68 66 61 25 30 45 7.1

Swivel Safety Hook with Griplatch LKBK with ball-bearing

Art. no. Code WLL L B C E A G H Weight
(tonnes*) (kg)

Z100980 LKBK-7/8-10 2.5 176 37 27 38 12 20 22 1.2

Z100962 LKBK-10-10 4 213 47 35 44 15 22 29 2.1
Z100997 LKBK-13-10 6.7 261 53 43 48 19 29 38 4.0
Z100999 LKBK-16-10 10 323 68 61 61 25 30 45 6.8

44 TITAN 2014 / 2015 CATALOGUE

FITTINGS
HOOKS

D
G-100 Eye Self Locking Hook.
Working For Grade
Item No. Load Limit 100 Chain Dimensions (inch) N.W.
A
Lbs* tonnes* inch K P A D T H Lbs

X-025-06 2,700 1.4 7/32 4.33 1.10 0.83 0.39 0.59 0.87 1.1
K X-025-07 5,700 2.5 1/4~5/16 5.35 1.34 0.98 0.43 0.79 1.02 1.8
X-025-10 8,800 4.0 3/8 6.57 1.73 1.26 0.51 1.02 1.34 3.3
P P
X-025-13 15,000 6.7 1/2 8.15 2.01 1.57 0.63 1.18 1.65 6.6
X-025-16 22,600 10.0 5/8 9.92 2.36 1.97 0.83 1.42 2.20 12.5
H
X-025-20 35,300 16.0 3/4 11.42 2.76 2.36 0.91 2.09 2.56 22.5
T X-025-22 42,700 19.0 7/8 12.56 3.15 2.76 0.94 1.93 2.80 24.0
X-025-26 59,700 26.5 1 13.50 3.90 3.15 0.98 2.20 3.11 30.1

* Design Factor 4:1 proof tested and certified.

A G-100 Clevis Self Locking Hook.

Working For Grade
Item No. Load Limit 100 Chain Dimensions (inch) N.W.
Lbs* tonnes* inch K P T H Lbs

K X-026-06 2,700 1.4 7/32 3.66 1.10 0.59 0.87 1.1

P X-026-07 5,700 2.5 1/4~5/16 4.69 1.34 0.79 1.02 1.8
P
X-026-10 8,800 4.0 3/8 5.59 1.73 1.02 1.34 3.3
X-026-13 15,000 6.7 1/2 7.01 2.01 1.18 1.65 6.6
H
X-026-16 22,600 10.0 5/8 8.39 2.36 1.42 2.20 12.5
T X-026-20 35,300 16.0 3/4 9.61 2.76 2.09 2.56 22.5
X-026-22 42,700 19.0 7/8 10.75 3.15 1.93 2.80 24.0

* Design Factor 5:1 proof tested and certified.

G-100 Swivel Self Locking Hook, with brass bushing.

Working For Grade
Item No. Load Limit 100 Chain Dimensions (inch) N.W.
Lbs* tonnes* inch K P B A D T H Lbs

Dimensions (in.)
Thread
Dia. & HG-226 Working Weight J K M N X
Take Up Stock No. Load Limit Each A Open Closed Open Closed R S Closed BB
(in) (lbs)* (lbs)

† 1/4 x 4 1031252 500 .29 .25 11.94 7.94 12.38 8.38 .81 .34 1.76 4.07
† 5/16 x 4-1/2 1031270 800 .48 .31 13.92 9.42 14.48 9.98 .95 .44 2.20 4.58
† 3/8 x 6 1031298 1200 .75 .38 17.56 11.56 18.24 12.24 1.13 .53 2.48 6.10
1/2 x 6 1031314 2200 1.72 .50 19.94 13.94 20.82 14.82 1.41 .71 3.56 6.03
1/2 x 12 1031350 2200 2.63 .50 32.23 20.23 33.11 21.11 1.41 .71 3.54 12.36
5/8 x 6 1031378 3500 2.75 .63 21.72 15.72 22.72 16.72 1.80 .88 4.35 6.03
5/8 x 12 1031412 3500 4.12 .63 34.06 22.06 35.06 23.06 1.80 .88 4.34 12.39
3/4 x 6 1031430 5200 4.22 .75 23.24 17.24 24.50 18.50 2.09 1.00 5.12 6.13
3/4 x 12 1031476 5200 6.12 .75 35.64 23.64 36.90 24.90 2.09 1.00 5.09 12.59
3/4 x 18 1031494 5200 7.83 .75 47.64 29.64 48.90 30.90 2.09 1.00 5.12 18.53
7/8 x 12 1031519 7200 8.83 .88 36.70 24.70 38.20 26.20 2.38 1.25 5.79 12.16
7/8 x 18 1031537 7200 11.5 .88 49.17 31.17 50.67 32.67 2.38 1.25 5.79 18.63
1x6 1031555 10000 9.62 1.00 26.24 20.24 28.00 22.00 3.00 1.43 6.50 6.18
1 x 12 1031573 10000 13.0 1.00 38.24 26.24 40.00 28.00 3.00 1.43 6.50 12.18
1 x 18 1031591 10000 16.3 1.00 50.24 32.24 52.00 34.00 3.00 1.43 6.50 18.18
1 x 24 1031617 10000 20.2 1.00 62.84 38.84 64.60 40.60 3.00 1.43 6.47 24.84
1-1/4 x 12 1031635 15200 19.9 1.25 42.14 30.14 44.38 32.38 3.59 1.82 8.49 12.06
1-1/4 x 18 1031653 15200 23.8 1.25 54.14 36.14 56.38 38.38 3.59 1.82 8.49 18.06
1-1/4 x 24 1031671 15200 27.8 1.25 66.70 42.70 68.94 44.94 3.59 1.82 8.49 24.62
1-1/2 x 12 1031699 21400 28.7 1.50 44.24 32.24 46.74 34.74 4.09 2.12 9.46 12.32
1-1/2 x 18 1031715 21400 34.1 1.50 56.24 38.24 58.74 40.74 4.09 2.12 9.46 18.32
1-1/2 x 24 1031733 21400 39.6 1.50 68.86 44.86 71.36 47.36 4.09 2.12 9.46 24.94
1-3/4 x 18 1031779 28000 50.7 1.75 57.38 39.38 60.38 42.38 4.65 2.38 9.97 18.37
1-3/4 x 24 1031797 28000 58.2 1.75 69.38 45.38 72.38 48.38 4.65 2.38 9.97 24.37
2 x 24 1031813 37000 83.5 2.00 75.68 51.68 79.18 55.18 5.81 2.69 13.03 24.48
2-1/2 x 24 1031831 60000 149 2.50 79.18 55.18 83.18 59.18 6.49 3.12 13.76 24.60
2-3/4 x 24 1031859 75000 174 2.75 81.34 57.34 85.84 61.84 7.00 3.25 15.09 24.65

* Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
† Mechanical Galvanized

48 TITAN 2014 / 2015 CATALOGUE

FITTINGS
TURNBUCKLES

Jaw & Eye Turnbuckles

- End fittings are Quenched and Tempered or - Modified UNJ thread on end fittings for improved
Normalized, bodies heat treated by normalizing. fatigue properties.
- Hot Dip galvanized steel. - Body has UNC threads.
- Turnbuckles eyes are forged and elongated, by - Meets or exceeds all requirements of ASME
design, to maximize easy attachment in system B30.26 including identification, ductility, design
and minimize stress in the eye. For turnbuckles factor, proof load and temperature requirements.
size 1/4” through 2-1/2”, a shackle one size smaller Importantly, these turnbuckles meet other critical
can be reeved through eye. performance requirements including fatigue life,
- Forged jaw ends are fitted with bolts and nuts for impact properties and material traceability, not
1/4” through 5/8”, and pins and cotters on 3/4” addressed by ASME B30.26.
through 2-3/4” sizes. - TURNBUCKLES RECOMMENDED FOR
STRAIGHT OR IN-LINE PULL ONLY.
- Lock Nuts available for all sizes.
- Fatigue Rated.
HG-227

HG-227 Jaw & Eye

Dimensions (in.)
Thread
Dia. & HG-227 Working Weight E J K M N X
Take Up Stock No. Load Limit Each A B Closed G Open Closed Open Closed R S Closed BB
(in) (lbs)* (lbs)

† 1/4 x 4 1031877 500 .33 .25 .45 1.66 .64 11.57 7.57 12.28 8.28 .81 .34 1.76 4.07
† 5/16 x 4-1/2 1031895 800 .52 .31 .50 2.02 .87 13.50 9.00 14.30 9.80 .95 .44 2.20 4.58
† 3/8 x 6 1031911 1200 .80 .38 .53 2.11 .85 16.91 10.91 17.87 11.87 1.13 .53 2.48 6.10
1/2 x 6 1031939 2200 1.77 .50 .64 3.22 1.07 19.30 13.30 20.48 14.48 1.41 .71 3.56 6.03
1/2 x 9 1031957 2200 2.25 .50 .64 3.20 1.07 25.59 16.59 26.77 17.77 1.41 .71 3.54 9.36
1/2 x 12 1031975 2200 2.67 .50 .64 3.20 1.07 31.59 19.59 32.77 20.77 1.41 .71 3.54 12.36
5/8 x 6 1031993 3500 2.98 .63 .79 3.90 1.32 20.73 14.73 22.27 16.27 1.80 .88 4.35 6.03
5/8 x 9 1032019 3500 3.72 .63 .79 3.89 1.32 27.07 18.07 28.61 19.61 1.80 .88 4.34 9.39
5/8 x 12 1032037 3500 4.35 .63 .79 3.89 1.32 33.07 21.07 34.61 22.61 1.80 .88 4.34 12.39
3/4 x 6 1032055 5200 4.51 .75 .97 4.71 1.52 22.17 16.17 24.09 18.09 2.09 1.00 5.12 6.13
3/4 x 9 1032073 5200 5.56 .75 .97 4.68 1.52 28.57 19.57 30.49 21.49 2.09 1.00 5.09 9.59
3/4 x 12 1032091 5200 6.42 .75 .97 4.68 1.52 34.57 22.57 36.49 24.49 2.09 1.00 5.09 12.59
3/4 x 18 1032117 5200 8.14 .75 .97 4.71 1.52 46.57 28.57 48.49 30.49 2.09 1.00 5.12 18.53
7/8 x 12 1032135 7200 9.10 .88 1.16 5.50 1.77 35.68 23.68 37.91 25.91 2.38 1.25 5.79 12.16
7/8 x 18 1032153 7200 11.6 .88 1.16 5.50 1.77 48.15 30.15 50.38 32.38 2.38 1.25 5.79 18.63
1x6 1032171 10000 10.0 1.00 1.34 6.09 2.05 25.03 19.03 27.59 21.59 3.00 1.43 6.50 6.18
1 x 12 1032199 10000 13.4 1.00 1.34 6.09 2.05 37.03 25.03 39.59 27.59 3.00 1.43 6.50 12.18
1 x 18 1032215 10000 16.7 1.00 1.34 6.09 2.05 49.03 31.03 51.59 33.59 3.00 1.43 6.50 18.18
1 x 24 1032233 10000 20.6 1.00 1.34 6.06 2.05 61.63 37.63 64.19 40.19 3.00 1.43 6.47 24.84
1-1/4 x 12 1032251 15200 20.9 1.25 1.84 8.09 2.82 40.76 28.76 43.98 31.98 3.59 1.82 8.49 12.06
1-1/4 x 18 1032279 15200 24.8 1.25 1.84 8.09 2.82 52.76 34.76 55.98 37.98 3.59 1.82 8.49 18.06
1-1/4 x 24 1032297 15200 28.8 1.25 1.84 8.09 2.82 65.32 41.32 68.54 44.54 3.59 1.82 8.49 24.62
1-1/2 x 12 1032313 21400 30.6 1.50 2.06 8.93 2.81 42.50 30.50 46.21 34.21 4.09 2.12 9.46 12.32
1-1/2 x 18 1032331 21400 36.0 1.50 2.06 8.93 2.81 54.50 36.50 58.21 40.21 4.09 2.12 9.46 18.32
1-1/2 x 24 1032359 21400 41.5 1.50 2.06 8.93 2.81 67.12 43.12 70.83 46.83 4.09 2.12 9.46 24.94
1-3/4 x 18 1032395 28000 52.1 1.75 2.60 9.36 3.35 55.37 37.37 59.77 41.77 4.65 2.38 9.97 18.37
1-3/4 x 24 1032411 28000 59.7 1.75 2.60 9.36 3.35 67.37 43.37 71.77 47.77 4.65 2.38 9.97 24.37
2 x 24 1032439 37000 89.9 2.00 2.62 11.80 3.74 72.66 48.66 77.95 53.95 5.81 2.69 13.03 24.48
2-1/2 x 24 1032457 60000 158 2.50 3.06 13.26 4.44 76.08 52.08 82.68 58.68 6.49 3.12 13.76 24.60
2-3/4 x 24 1032475 75000 187 2.75 3.69 14.92 4.19 78.05 54.05 85.67 61.67 7.00 3.25 15.09 24.65

* Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
† Mechanical Galvanized

TITAN 2014 / 2015 CATALOGUE 49

FITTINGS
TURNBUCKLES

Jaw & Jaw Turnbuckles

- End fittings are Quenched and Tempered or - Meets or exceeds all requirements of ASME
Normalized, bodies heat treated by normalizing. B30.26 including identification, ductility, design
- Hot Dip galvanized steel. factor, proof load and temperature requirements.
- TURNBUCKLES RECOMMENDED FOR Importantly, these turnbuckles meet other critical
STRAIGHT OR IN-LINE PULL ONLY. performance requirements including fatigue life,
- Forged jaw ends are fitted with bolts and nuts impact properties and material traceability, not
for 1/4” through 5/8”, and pins and cotters on addressed by ASME B30.26.
3/4” through 2-3/4” sizes. - Lock Nuts available for all sizes.
- Modified UNJ thread on end fittings for - Fatigue Rated.
improved fatigue properties.
- Body has UNC threads.

HG-228

HG-228 Jaw & Jaw

Dimensions (in)
Thread
Dia. & HG-228 Working Weight E J K M N
Take Up Stock No. Load Limit Each A B Closed G Open Closed Open Closed BB
(in) (lbs)* (lbs)*

† 1/4 x 4 1032493 500 .37 .25 .45 1.66 .64 11.19 7.19 12.18 8.18 4.07
† 5/16 x 4-1/2 1032518 800 .56 .31 .50 2.02 .87 13.07 8.57 14.12 9.62 4.58
† 3/8 x 6 1032536 1200 .85 .38 .53 2.11 .85 16.25 10.25 17.50 11.50 6.10
1/2 x 6 1032554 2200 1.82 .50 .64 3.22 1.07 18.65 12.65 20.14 14.14 6.03
1/2 x 9 1032572 2200 2.29 .50 .64 3.20 1.07 24.94 15.94 26.43 17.43 9.36
1/2 x 12 1032590 2200 2.71 .50 .64 3.20 1.07 30.94 18.94 32.43 20.43 12.36
5/8 x 6 1032616 3500 3.21 .63 .79 3.90 1.32 19.74 13.74 21.82 15.82 6.03
5/8 x 9 1032634 3500 3.95 .63 .79 3.89 1.32 26.08 17.08 28.16 19.16 9.39
5/8 x 12 1032652 3500 4.58 .63 .79 3.89 1.32 32.08 20.08 34.16 22.16 12.39
3/4 x 6 1032670 5200 4.80 .75 .97 4.71 1.52 21.09 15.09 23.68 17.68 6.13
3/4 x 9 1032698 5200 5.85 .75 .97 4.68 1.52 27.49 18.49 30.08 21.08 9.59
3/4 x 12 1032714 5200 6.72 .75 .97 4.68 1.52 33.49 21.49 36.08 24.08 12.59
3/4 x 18 1032732 5200 8.45 .75 .97 4.71 1.52 45.49 27.49 48.08 30.08 18.53
7/8 x 12 1032750 7200 9.37 .88 1.16 5.50 1.77 34.65 22.65 37.62 25.62 12.16
7/8 x 18 1032778 7200 11.8 .88 1.16 5.50 1.77 47.12 29.12 50.09 32.09 18.63
1x6 1032796 10000 10.4 1.00 1.34 6.09 2.05 23.82 17.82 27.18 21.18 6.18
1 x 12 1032812 10000 13.8 1.00 1.34 6.09 2.05 35.82 23.82 39.18 27.18 12.18
1 x 18 1032830 10000 17.1 1.00 1.34 6.09 2.05 47.82 29.82 51.18 33.18 18.18
1 x 24 1032858 10000 21.0 1.00 1.34 6.06 2.05 60.42 36.42 63.78 39.78 24.84
1-1/4 x 12 1032876 15200 21.9 1.25 1.84 8.09 2.82 39.37 27.37 43.58 31.58 12.06
1-1/4 x 18 1032894 15200 25.9 1.25 1.84 8.09 2.82 51.37 33.37 55.58 37.58 18.06
1-1/4 x 24 1032910 15200 29.8 1.25 1.84 8.09 2.82 63.93 39.93 68.14 44.14 24.62
1-1/2 x 12 1032938 21400 32.6 1.50 2.06 8.93 2.81 40.76 28.76 45.68 33.68 12.32
1-1/2 x 18 1032956 21400 38.0 1.50 2.06 8.93 2.81 52.76 34.76 57.68 39.68 18.32
1-1/2 x 24 1032974 21400 43.5 1.50 2.06 8.93 2.81 65.38 41.38 70.30 46.30 24.94
1-3/4 x 18 1033018 28000 53.5 1.75 2.60 9.36 3.35 53.35 35.35 59.16 41.16 18.37
1-3/4 x 24 1033036 28000 61.1 1.75 2.60 9.36 3.35 65.35 41.35 71.16 47.16 24.37
2 x 24 1033054 37000 96.3 2.00 2.62 11.80 3.74 69.64 45.64 76.72 52.72 24.48
2-1/2 x 24 1033072 60000 167 2.50 3.06 13.26 4.44 72.97 48.97 82.18 58.18 24.60
2-3/4 x 24 1033090 75000 199 2.75 3.69 14.92 4.19 74.75 50.75 85.50 61.50 24.65

* Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. † Mechanical Galvanized

50 TITAN 2014 / 2015 CATALOGUE

HOISTING EQUIPMENT
CHAINS HOISTS & PULLERS

Series 653 Lever operated hoist

The Series 653 lever operated hoist is a high quality, rugged, steel tool for close quarter
pulling, stretching, and hoisting applications. Its characteristic short handle, along with
minimal lever pull effort, make this tool ideal for a broad range of applications.
- Capacities from 3/4 to 6 tons - Forged upper and lower hooks with
- Impact resistant, stamped steel frame, heavy cast steel latches.
gear case and cover for durability and - Rubber handle grip for added operator
light weight. comfort.
- Powder coated finish for added corrosion - Minimal maintenance with no special
protection. tools required.
- Hardened steel load sharing gears. - 5-year warranty against defects in
- Double pawl arrangement for assured materials and workmanship.
load control. - Metric rated.
- Two chain guide rollers for positive chain - Meets ASME B30.21 – Manually Lever
engagement. Operated Hoist Standard and European
- Weston type braking system for positive CE Standard.
load control and positioning. - Designed and manufactured by
- Simple one-handed, free chaining for fast Columbus McKinnon Corporation.
load attachment.
- Hardened steel chain for strength and
long wear life.

Ideal for construction

and industrial applications

Shipyard hooks are available for use with the Series 653 in shipbuilding
and metal fabrication industries. The upper shipyard hook replaces the
standard hook and easily attaches to the body of the hoist. The lower
hook is furnished with a chain block for direct attachment to the load of
the hoist. Shipyard hooks are excellent for positioning steel plate and
fixtures during welding applications.

TITAN 2014 / 2015 CATALOGUE 51

HOISTING EQUIPMENT
CHAINS HOISTS & PULLERS

Series 653 lever operated hoist-specifications

Capacity Product Code Net Wt.
(tons) (lbs.)

Upper 1 1/2 3315WLP 2.9

Shipyard
hook 3 3303WLP 4.9

Lower
1 1/2 3415WLP 2.1
Shipyard
hook 3 3403WLP 4.8

Product Max. Standard Approx.

Code Capacity Lift Shipping Wt.
(tons) (ft) (lbs.)

5336 1 1/2 5 27
5337 1 1/2 5 28
5338 3 5 45
5339 3 5 46

Specifications
Lever pull
Product Load Lift or to lift Approx.
code rating reach rated load ship wt. A B C D E F G H J K L
(tonnes) (ft.) (lbs.) (lbs.)

5310 3/4 5 33 15.0 12 5/8 15/16 11/8 11/16 11 4 3/8 2 3/16 2 3/16 5 15/16 2 3/8 3 9/16
5311 3/4 10 33 15.8 12 5/8 15/16 11/8 11/16 11 4 3/8 2 3/16 2 3/16 5 15/16 2 3/8 3 9/16
5312 3/4 15 33 16.6 12 5/8 15/16 11/8 11/16 11 4 3/8 2 3/16 2 3/16 5 15/16 2 3/8 3 9/16
5313 3/4 20 33 17.3 125/8 1 5/16 11/8 11/16 11 4 3/8 2 3/16 2 3/16 5 15/16 2 3/8 3 9/16
5328 1 5 44 15.0 12 5/8 15/16 11/8 11/16 11 4 3/8 2 3/16 2 3/16 5 15/16 2 3/8 3 9/16
5315 11/2 5 51 27.0 14 3/16 11/8 11/4 13/16 16 1/4 43/8 2 3/8 23/8 6 7/8 3 3 15/16
5316 11/2 10 51 31.4 143/16 11/8 11/4 13/16 16 1/4 43/8 2 3/8 2 3/8 6 7/8 3 3 15/16
5317 11/2 15 51 35.8 14 3/16 11/8 11/4 13/16 16 1/4 4 3/8 2 3/8 2 3/8 6 7/8 3 3 15/16
5318 11/2 20 51 40.2 14 3/16 11/8 11/4 13/16 16 1/4 4 3/8 2 3/8 2 3/8 67/8 3 3 15/16
5329 2 5 68 27.0 14 13/16 11/8 11/4 13/16 16 1/4 4 3/8 23/8 2 3/8 6 7/8 3 3 15/16
5320 3 5 77 45.0 18 11/16 11 3/16 19/16 11/4 16 1/4 7 1/2 3 3/8 4 3/16 7 7/8 3 3/8 4 9/16
5321 3 10 77 52.3 18 11/16 113/16 19/16 11/4 16 1/4 7 1/2 3 3/8 4 3/16 77/8 3 3/8 4 9/16
5330 6 5 77 78.0 23 1/4 1 13/16 2 3/16 1 1/2 16 1/4 7 1/2 3 3/8 4 3/16 7 7/8 3 3/8 4 9/16
5331 6 10 77 94.0 23 1/4 1 13/16 2 3/16 1 1/2 16 1/4 7 1/2 3 3/8 4 3/16 7 7/8 3 3/8 4 9/16
5332 6 15 77 110.0 23 1/4 1 13/16 2 3/16 1 1/2 16 1/4 7 1/2 3 3/8 4 3/16 7 7/8 3 3/8 4 9/16
5333 6 20 77 126.0 23 1/4 1 13/16 2 3/16 1 1/2 16 1/4 7 1/2 3 3/8 4 3/16 7 7/8 3 3/8 4 9/16

Overloading and improper use can result in injury.

To avoid injury:
• Do not exceed working load limit, load rating capacity
• Do not use to lift people or loads over people.
• Use only alloy chain for overhead lifting.
• Read and follow all instructions.

52 TITAN 2014 / 2015 CATALOGUE

HOISTING EQUIPMENT
CHAINS HOISTS & PULLERS

Series 622 hand chain hoist Specifications

Hand chain
Chain pull overhauled Approx.
- Simple, efficient, economical design Product Rated to lift rated to lift load shipping
- Equipped with hardened load chain code capacity* Standard lift load one foot weight
for flexibility and long wear (tons) (ft) (lbs.) (ft) (lbs.)

- Compact design, low headroom and 2255 1/2 10 53 29 18

lightweight steel construction for easy 2208 1/2 15 53 29 25
installation, even in confined spaces 2231 1/2 20 53 29 30
- Weston-type load brake requires no 2263 1/2 30 53 29 38
lubrication 2256 1 10 77 37 26
- Hand wheel cover with guide slots 2210 1 15 77 37 30
minimizes jamming and slipping 2262 1 20 77 37 38
- Forged swivel hooks with latches 2264 1 30 77 37 48
reduce twisting of chain and 2258 2 10 82 80 61
unintentional unhooking of load 2213 2 15 82 80 71
when chain is slack 2233 2 20 82 80 80
- Standard hand chain drop is 2 feet 2272 2 30 85 80 85
less than lift (example: 8 foot lift hoist 2259 3 10 65 154 89
has 6 foot hand chain drop) 2223 3 15 65 154 99
- One-year warranty 2214 3 20 65 154 109

- Metric rated 2260 5 10 105 147 91

2257 5 15 105 147 107
- Imported
2234 5 20 105 147 123
2277 10 10 109 289 170

1/2, 1, 2 Ton 3.5 Ton 10 Ton

Clearance dimensions (in)

Rated capacity* (tons)
Dimension 1/2 1 2 3 5 10
(tonnes) (ft.) (lbs.) (lbs.)

A (Headroom) 115/8 13 181/8 2129/32 237/8 279/16

B (Width) 415/16 519/32 85/16 85/16 85/16 143/32
C (Depth) 45/16 51/16 65/8 65/8 65/8 65/8
D (Diameter) 415/16 519/32 85/16 85/16 85/16 85/16
Hook opening (upper) 11/16 11/32 11/4 5/16 113/16 21/2
Hook opening (lower) 11/16 11/32 11/4 5/16 113/16 21/2

TITAN 2014 / 2015 CATALOGUE 53

HOISTING EQUIPMENT
CHAINS HOISTS & PULLERS

Lodestar electric chain hoist

The balanced, integrated, proven design of the Lodestar has made it the most popular
electric chain hoist in the industry. Lodestar gives you more value for your money including:
- Quick change voltage board-change overload device and standard
from low voltage to high voltage by adjustables crew type limit switches
simply repositioning receptacle - Hardened, forged steel, latch type
- Up to 3 ton capacities for heavy-duty hooks and Hoistaloy load chain for long,
industrial applications dependable service
- Gear train lifetime lubricated with - Zinc plated load chain standard
nonoxidizing grease - Easy to install and maintain
- Precision machined and hardened - No special tools required to disassemble
liftwheel with hardened chain guides - Lifetime warranty
for precise chain liftwheel fit - Each hoist thoroughly inspected and
- Gearing designed for exceptionally long tested to over 125% of rated load prior
life and quiet operation to shipment
- H4 duty standard - Meets ASME B30.16
- Rugged control station (NEMA 4X) - Metric rated
- Hoist duty motor, standard Protector - Made in U.S.A.

Special Applications
- Harsh environment hoists available for severe duty of plating,
galvanizing and washdown applications
- Hoists with climbing capability available for temporary rigging or
lifting applications — must be used in inverted position only
- Hoists with creep control allow precise positioning through field
adjustment within the time delay range of .05 sec. to 3 sec.
- Articulating suspension 3 ton only

Specifications – two speed

Product code†
less suspension
Rated Standard Lift Motor Approximate
capacity* lift speed H.P. Model Reeving 230-3-60 460-3-60 shipping
(tons) (ft.) (F.P.M.) (lbs.)

1/8 10 10/32 1/4 A2 1 2707 2708 70

10 20/60 1/2 AA2 1 2717 2718 74
1/4 10 5/16 1/4 B2 1 2727 2728 70
10 10/32 1/2 C2 1 2737 2738 74
1/2 10 2.5/8 1/4 E2 2 2747 2748 79
10 5/16 1/2 F2 1 2757 2758 74
10 10/32 1 J2 1 3502 3503 116
10 21/64 2 JJ2 1 3549 3550 130
1 10 2.5/8 1/2 H2 2 2767 2768 83
10 5/16 1 L2 1 3504 3505 116
10 10/32 2 LL2 1 3553 3554 130
2 10 2.5/8 1 R2 2 3506 3507 136
10 5/16 2 RR2 2 3561 3562 150
3 10 1.75/5.5 1 RT2 3 9511 9513 161
10 3.5/11 2 RRT2 3 9512 9514 175

† Specify voltage 230 or 460

54 TITAN 2014 / 2015 CATALOGUE

HOISTING EQUIPMENT
CHAINS HOISTS & PULLERS

Specifications – single speed

Product code† Approximate
less suspension
Rated Standard Lift Motor shipping
capacity* lift speed H.P. Model Reeving 115-1-60 230/460-3-60 weight
(tons) (ft.) (F.P.M.) (lbs.)

1/8 10 32 1/4 A 1 2702 2705 60

10 60 1/2 AA 1 2712 2715 66
15 32 1/4 A 1 3101 3103 64
15 60 1/2 AA 1 3111 3113 70
20 32 1/4 A 1 3102 3104 68
20 60 1/2 AA 1 3112 3114 74
1/4 10 16 1/4 B 1 2722 2725 60
10 32 1/2 C 1 2732 2735 66
15 16 1/4 B 1 3121 3123 64
15 32 1/2 C 1 3131 3133 70
20 16 1/4 B 1 3122 3124 68
20 32 1/2 C 1 3132 3134 74
1/2 10 8 1/4 E 2 2742 2745 69
10 16 1/2 F 1 2752 2755 66
10 32 1 J 1 3512 3515 110
10 64 2 JJ 1 — 3545 117
15 8 1/4 E 2 3141 3143 76
15 16 1/2 F 1 3151 3153 70
15 32 1 J 1 4212 4214 116
15 64 2 JJ 1 — 4244 123
20 8 1/4 E 2 3142 3144 83
20 16 1/2 F 1 3152 3154 74
20 32 1 J 1 4213 4215 121
20 64 2 JJ 1 — 4245 128
1 10 8 1/2 H 2 2762 2765 75
10 16 1 L 1 3522 3525 110
10 32 2 LL 1 — 3555 117
15 8 1/2 H 2 3161 3163 82
15 16 1 L 1 4222 4224 116
15 32 2 LL 1 — 4254 123
20 8 1/2 H 2 3162 3164 89
20 16 1 L 1 4223 4225 121
20 32 2 LL 1 — 4255 128
2 10 8 1 R 2 3532 3535 130
10 16 2 RR 2 — 3565 137
15 8 1 R 2 4232 4234 140
15 16 2 RR 2 — 4264 147
20 8 1 R 2 4233 4235 150
20 16 2 RR 2 — 4265 157
3 10 5.5 1 RT 3 9501 9505 155
10 11 2 RRT 3 — 9508 162
15 5.5 1 RT 3 9502 9506 169
15 11 2 RRT 3 — 9509 176
20 5.5 1 RT 3 9503 9507 183
20 11 2 RRT 3 — 9510 190

†Specify voltage 230 or 460

TITAN 2014 / 2015 CATALOGUE 55

HOISTING EQUIPMENT
CHAINS HOISTS & PULLERS

Lodestar with hook suspension

Clearance dimensions (in.)
Lodestar models
A,B,C,F J, L, JJ RT and
Dimension and AA E and H and LL R RR RRT

A 161/4 195/8 189/16 241/8 241/8 299/16

B 61/8 61/8 75/8 75/8 75/8 75/8
C 11/16 7/8 7/8 11/8 11/8 11/8
D 11 11 91/2 91/2 91/2 91/2
F 73/4 73/4 1011/16 1011/16 1011/16 1011/16
H 1 13/16 13/16 11/2 11/2 11/2
I 413/16 37/8 71/4 63/16 63/16 63/16
J 315/16 47/8 57/16 61/2 61/2 61/2
L 111/16 111/16 7/16 7/16 7/16 7/16
M 1 11/8 11/8 15/16 15/16 15/16
P 65/8 69/16 713/16 713/16 713/16 713/16
R* 97/8 127/8 127/8 187/8 187/8 247/8
AP 91/4 99/16 1011/16 113/16 113/16 129/16

† Based on 10 ft. lift and increases proportionately with longer lifts

Suspension specifications
Type Product code Models

Swivel hook 2792 A-AA-B-C-F

Swivel hook 2793 E-H
Swivel hook 3661 J-L-JJ-LL
Swivel hook 3660 R-RR
Swivel hook 9557 RT-RRT
Swivel latchlok hook 2796 A-AA-B-C-F
Swivel latchlok hook 3662 J-L-JJ-LL
Swivel latchlok hook 3663 R-RR
Rigid lug for low head trolley 2778 A-AA-B-C-F
Rigid lug for low head trolley 2779 E-H
Rigid lug for low head trolley 3677 J-L-JJ-LL
Rigid lug for low head trolley 3668 R-RR
Rigid lug for low head trolley 9561 RT-RRT
Rigid hook 2788 A-AA-B-C-F
Rigid hook 2789 E-H
Rigid hook 3651 J-L-JJ-LL
Rigid hook 3658 R-RR
Rigid hook 9559 RT-RRT
Rigid latchlok hook 2790 A-AA-B-C-F
Rigid latchlok hook 3652 J-L-JJ-LL
Note: 3 ton lug suspension prevents hoist from rotating but allows hoist to articulate below trolley

Overloading and improper use can result in injury.

56 TITAN 2014 / 2015 CATALOGUE

HOISTING EQUIPMENT
BEAM CLAMPS & TROLLEYS

Screwlok Shackled Beam Clamp

- Designed to fit flanges of most
structural beams
- Act as a semi-permanent lifting point
for use with manual or electric hoists
- Shackle incorporated for load
suspension

SC922

Dimensions (in.)
Working
Model Load Limit Flange A B C D E F Weight
lb. in. lb.

SC921 2,200 3 to 8-1/4 12.625 12.125 1.750 8.250 5.375 2.625 11.0
SC922 4,400 3 to 8-1/4 12.625 12.875 1.750 8.250 5.375 2.875 13.5
SC923 6,600 4 to 10-5/8 16.125 14.750 1.750 10.625 6.500 4.000 17.5
SC923/ 6,600 3 to 12 17.375 16.500 1.750 12.000 8.625 4.000 20.0
SC925 11,000 4 to 10-5/8 16.125 15.375 2.125 10.625 8.500 4.375 22.0
SC925/ 11,000 3 to 12 17.125 17.125 2.125 12.000 8.625 4.375 26.5
SC9210 22,000 3 to 12 18.125 20.000 3.250 12.000 8.625 4.375 35.5

Screwlok Beam Clamp

- Rated loads from 1-10 Ton. Reduced
flange stress — Special clamp jaw
design distributes load away from
flange edge.
- Threaded mechanism fits securely
on a wide range of flange widths and
beam sizes.
- Low headroom provided by built-in
suspension bar.

09003W
Dimensions
Working
Model Load Limit Flange A B(min) B(max) c D E F (max) F(min) G H Weight
lb. in. in. in. in. in. in. in. in. in. in. in. lb.

09001W 2,000 3-9 10.6 6.9 14.4 2.9 0.20 8.4 5.4 2.9 1.2 0.80 8.8
09002W 4,000 3-9 10.6 7.3 15.0 2.9 0.20 8.4 5.4 2.9 1.2 0.80 13.2
09003W 6,000 3.2-12.6 11.6 8.7 16.7 4.0 0.30 10.0 6.3 4.1 2.4 0.87 17.6
09004W 10,000 3.6-12.2 12.6 9.8 18.7 4.0 0.30 10.0 6.3 3.5 1.8 1.10 22.0
09005W 20,000 3.6-12.2 12.6 10.5 18.9 4.6 0.47 10.8 7.2 5.2 2.6 1.50 32.0

TITAN 2014 / 2015 CATALOGUE 57

HOISTING EQUIPMENT
BEAM CLAMPS & TROLLEYS

Series 633 Wide Range Trolley

- Rugged steel side plates formed to - Spacer washers can be shifted inside or
include bumpers and trolley guards outside for easy adjustment to wide range
- Frames connected by steel equalizer pin, of beams
secured by two nuts on each side - To be used with hook suspended hoist
- Universal tread flanged trackwheels - Suspension plate for easy attachment is
equipped with shielded ball bearings standard
- Easy rolling on American standard shapes, - Bearings prepacked with lifetime lubricant
wide flange shapes or patented rail - One-year warranty
- Hardened wheels and axles for added - Imported
strength and durability
3304 Clearance dimensions (in.)
Rated capacity* (tons)
Dimension 1/2 1 2 3 5

Min. radius
curve (in.) 35 35 59 71 94
A 8 1/2 10 13/16 12 7/32 I4 13/16 18 1/8
B** 2 5/32 2 13/32 2 11/16 3 1/16 3 21/32
C 5 1/16 6 9/16 6 25/32 7 13/32 8
D** 1/16 7/16 13/32 1/2 9/l6
E** –1/4 11/32 25/32 1 7/8 2 3/l6
F 2 9/32 3 15/32 3 15/16 5 1/8 6 1/8
G 4 4 7/8 5 1/2 6 9/16 7 7/8
The CM Series 633 Wide Range Trolley features a
simple, rugged design built for trouble-free service H** 3 4 11/32 4 29/32 6 1/8 7 9/32
and ease of operation across a wide range of beam J** l 1/32 1 1/32 25/32 1 3/16 2 1/8
applications. K 1 3/4 2 3/32 2 1/2 3 13/32 3 13/32
L 1/2 1/2 5/8 5/8 13/16
M** 15/16 31/32 5/16 15/16 1 7/16
N** 4 3/32 5 1 16 5 13/16 7 7/16 9 15/16
P 1 7/32 1 3/4 2 5/32 2 9/16 3 23/32
Q 1 9/32 19/32 13/16 1 3/8 1 25/32
R 31/32 1 5/32 1 5/8 1 31/32 2 9/16

** Dimensions given are for minimum S-beam and will vary with larger beams.

Corso Beam Trolley

- Models from 250kg to 20t available With endless chain drive

- Rolls on sealed-for-life ball bearings Models Code Models Code

Pushing - Easy adjustment to the size of the steel 1T 23339 Large 1T 108929
Trolley beam using crank 2T 23349 Large 2T 108939
- Wide adjustment range 3T 23359 Large 3 T 108949
5T 23369 Large 5 T 108959
- Bumper stop and derailment guard
- Tipping guard Pushing Trolley
- Movement is achieved through pushing Models Code Models Code
- Movement is achieved through an 0,5 T 23309 Large 0,5 T 108879
endless chain drive 1T 23319 Large 1 T 108889
- Motorised movement 2T 23319 Large 2 T 108899
3T 23379 Large 3 T 108909
With endless 5T 23389 Large 5 T 108919
chain drive 10 T 56279

58 TITAN 2014 / 2015 CATALOGUE

HOISTING EQUIPMENT
PLATE CLAMPS

Crosby IPTK Beam Clamp

- Available in capacities of 2 thru 25 metric stamped on body.
tons. - Each product is individually serialized, with
- Wide variety of jaw openings available: Proof Load test date stamped on body.
75 to 1020mm. - Serial number is included on the test
- Welded alloy steel body for strength and certificate with maintenance and warranty
smaller size. logbook.
- Forged alloy components, where required. - Maintenance replacement parts are
- Individually Proof Tested to 2 times the available.
Working Load Limit with certification. - Manufactured by a ISO 9001 facility.
- Company name (IP), logo, Working Load - All sizes are RFID EQUIPPED.
Limit and jaw opening permanently
Dimensions (mm)
Working Stock Weight
Model Load Limit No. Each Jaw A C D E F H K
(t)* (kg)

IPTK 2 2700996 6.0 75-190 A+ 80 125 75 – 25 20

IPTK 3 2700997 6.5 75-190 A+ 80 125 75 – 25 20
IPTK 4 2700998 8.5 150-280 A+100 125 75 – 35 20
IPTK C 2700994 110 120-350 A+ 195 125 75 – 40 20
IPTK 10 2700970 3I0 300 - 500 A+ 300 171 74 – 40 30
IPTK 2-5 2702999 225 450- 1020 A+ 220 500 125 – 76 45
Without Hoisting Eye

IPTK IPTKW 2 2700966 4.0 75-190 A+ 80 125 – 28 25 –

This IPTK series beam clamp is IPTKW 3 2700967 45 75-190 A+ 80 125 – 28 25 –
suitable for use as a temporary IPTKW 4 2700968 6.3 150-280 A+100 125 – 33 35 –
tackle eye for a beam.
IPTKW 5 2700969 8.8 120-350 A+195 125 – 33 40 –
Design Factor based on EN 13155 and ASME B30.20.

Crosby IPBKZ Plate Clamp

- Available in capacities of .75 thru 3.75 the serial number and Proof Load test date
metric tons. stamped on body. Serial number is included
The IPBKZ beam clamp - Wide variety of jaw openings available: on the test certificate with maintenance and
is used for lifting, transfer 0 to 28mm. warranty logbook.
and stacking of I-Beams.
- Welded alloy steel body for strength and - Optional IP-5000 Stinger assembly
An over-center hoist eye
allows for the beam flange smaller size. available. Allows for easy connection
to remain vertical. This - Forged alloy components, where required. between the clamp and hoist hook.
series of clamps can be
used in the vertical and - Individually Proof Tested to 2 times the - Minimum WLL of 10% of Maximum WLL.
horizontal moving, transfer Working Load Limit with certification. - Maintenance replacement parts are
and stacking of different available.
types of structural designs,
- Company name (IP), logo, WLL and jaw
such as I-Beams, angles, opening permanently stamped on body. - Manufactured by a ISO 9001 facility.
etc, depending on the - Each product is individually serialized, with - All sizes are RFID EQUIPPED.
application desired.
IPBKZ
Dimensions (mm)
Working Stock Weight
Model Load Limit No. Each Jaw A B C D E F G H J
(t)* Iff (kg)

IPBKZ 0.75 2705780 3.5 5-15 43 132 192 45 113 47 38 10

IPBKZ 1.5 2705781 7.0 5-25 62 210 300 70 163 61 50 16
IPBKZ 3.75 2705782 15.5 5-28 75 260 415 100 202 78 52 20
Design Factor based on EN 13155 and ASME B30.20.

TITAN 2014 / 2015 CATALOGUE 59

HOISTING EQUIPMENT
PLATE CLAMPS

Crosby IP Plate Clamp

- Available in capacities of .5 thru 30 - Each product is individually serialized, - Full 180° turning range for material
metric tons (Higher Working Load Limits with the serial number and Proof Load transfer, turning or moving.
are available upon request). test date stamped on body. - Lock open, lock closed ability with latch
- Wide variety of jaw openings available: - Serial number is included on the test for pretension on material and then
0” to 6.13”. certificate with maintenance and release of material.
- Welded alloy steel body for strength and warranty logbook. - Optional IP-5000 Stinger assembly
smaller size. - Available in a variety of styles: available, allows for easy connection
- Forged alloy components, where - IP10 - Standard clamp for materials with between the clamp and hoist hook.
required. a surface hardness to 37Rc (345 HB). - Minimum WLL of 10% of Maximum WLL.
- Individually Proof Tested to 2 times the - IP10J - Larger jaw opening. - Maintenance replacement kits are
Working Load Limit with certification. - IP10S - For use with Stainless Steel available.
- Company name (IP), logo, Working Load material. - Manufactured by a ISO 9001 facility.
Limit and jaw opening permanently - IP10H - For use with materials with a - All sizes are RFID EQUIPPED.
stamped on body. surface hardness to 47Rc (450 HB).
Dimensions (in.)
Working IP10 Stock Weight
Model Load Limit No. Each Jaw A B C D E F G H J K
(t)* (lbs.)

IP10 0.5 2701674 [Link] 0-.63 1.73 5.05 8.16 1.19 4.53 1.61 1.11 – 0.39
IP10 1 2701662 4.85 0-.75 1.75 6.47 8.46 1.19 4.47 1.62 1.50 – 0.39
IP10 2 2701676 i6.a 0-1.38 3.08 7.91 13.23 2.75 7.47 2.41 2.17 – 0.63
IP10 3 2701664 30.4 0-1.56 3.94 9.96 17.17 2.05 8.86 3.08 2.36 – 0.78
IP10 4.5 2701666 33.0 0-1.56 2.04 9.95 17.17 2.05 8.86 2.22 2.56 – 0.78
IP10 6 2701668 51.8 0-2.00 4.95 11.89 20.28 3.16 11.50 3.31 3.73 1.58 0.78
IP10AJ 6 2701705 63.0 2.00-3.88 4.96 11.89 20.27 3.15 13.46 3.31 3.74 1.57 0.78
IP10 9 2701670 60.6 0-2. CO 4.95 12.80 21.66 3.17 12.20 3.13 4.14 1.73 0.78
IP10/J 9 2701672 62. A 2.00-3.88 4.95 12.80 21.84 3.16 14.17 3.13 4.14 1.73 0.78
IP10 12 2701676 108 0-2.13 6.30 15.39 22.83 3.16 13.03 4.61 5.39 1.61 1.00
IP10/J 12 2701680 128 2.13-4.25 7.02 17.28 24.80 3.16 16.34 4.61 5.39 1.61 1.00
IP10 IP10 16 2701682 150 .25-2.50 7.02 18.31 27.17 3.47 15.63 4.69 6.03 1.92 1.00
The IP10 vertical lifting clamp is used for the lifting,
turning, moving or vertical transfer of sheet, plates, IP10AJ 16 2701684 200 2.50-5.00 8.19 20.52 29.38 3.47 18.58 4.99 6.34 1.92 1.00
or fabrications from horizontal to vertical and down IP10 22.5 2701686 238 .25-3.13 8.73 21.81 31.50 4.33 18.50 5.45 7.33 1.92 1.00
to horizontal (180°) as needed. Usually used as a IP1Q/J 22.5 2701688 242 3.13 - 6.13 9.95 24.72 34.64 4.33 22.64 5.36 7.72 1.92 1.00
single point pick or when used with a spreader
beam with multiple vertical drop lines. IP10 30 2701690 326 .25-3.13 8.72 21.45 31.50 4.33 18.50 5.98 7.22 2.13 1.19
IP10/J 30 2701692 335 3.13-6.13 9.84 24.41 34.64 4.33 22.25 5.98 7.72 2.13 1.19
For stainless steel - with fixed hoisting eye
IP10S 0.5 2702274 4.00 0-63 1.73 5.05 8.16 1.19 4.53 1.61 1.11 – 0.39
IP10/S 1 2702262 4.40 0-.75 1.75 5.47 8.46 1.19 4.47 1.63 1.50 – 0.39
IP10/S 2 2702276 15.0 0-1.38 3.08 7.91 13.23 2.75 7.47 2.41 2.17 – 0.63
IP10/S 3 2702264 30.4 0-1.56 3.94 9.95 17.17 2.95 8.86 3.08 2.36 – 0.78
IP10/S 4.5 2702266 33.0 0-1.56 3.94 9.95 17.17 2.95 8.86 3.23 2.56 – 0.78
IP10/S 6 2702268 51.8 0 - 2.00 4.95 11.89 20.28 3.16 11.50 3.31 3.73 1.58 0.78
IP10/S 9 2702270 60.6 0 - 2.00 4.95 12.80 21.66 3.17 12.20 3.13 4.14 1.73 0.78
IP10/S 12 2702278 108 0-2.13 6.30 15.39 22.83 3.16 13.03 4.61 5.39 1.61 1.00
For very hard materials - with fixed hoisting eye
IP10/H 0.5 2702174 4.00 0-.63 1.73 5.05 8.16 1.19 4.52 1.61 1.11 – 0.39
IP10/H 1 2702176 15.0 0-1.38 3.08 7.91 13.23 2.75 7.47 2.41 2.17 – 0.63
IP10/H 2 2702164 30.4 0-1.56 3.94 9.96 17.17 2.95 8.86 3.08 2.36 – 0.78
IP10/H 3 2702166 33.0 0-1.56 2.04 0.05 17.17 2.95 8.86 3.23 2.56 – 0.72
IP10/H 4.5 2702168 51.8 0 - 2.00 4.95 1 1 AQ 20.28 3.16 11.50 3.31 3.73 1.58 0.78
IP10/H 6 2702170 60.6 0-2.00 4.03 12.80 21.66 3.17 12.20 3.13 4.14 1.73 0.78
Ultimate load is 5 times the Working Load Limit.

60 TITAN 2014 / 2015 CATALOGUE

HOISTING EQUIPMENT
PLATE CLAMPS

Horizontal Lifting Clamp

- Available in capacities of .75 thru 25 - Each product is individually serialized,
metric tons. with the serial number and Proof Load
- Wide variety of jaw openings available: 0” test date stamped on body. Serial number
to 4”. is included on the test certificate with
- Welded alloy steel body for strength and maintenance and warranty logbook.
smaller size. - Maintenance replacement parts are
- Forged alloy components, where available.
required. - Manufactured by a ISO 9001 facility.
- Individually Proof Tested to 2 times the - All sizes are RFID EQUIPPED.
Working Load Limit with certification.
- Company name (IP), logo, Working Load
Limit and jaw opening permanently
stamped on body.

Working IPHTONZ
Dimensions (in.)
Load Limit Stock Weight
Model (Per Pair) No. Each Jaw A B C E F G H J k
(t)* Iff (lbs.)

IPHTONZ 0.75 2705343 5.00 0- 1.18 2.95 0.63 0.63 2.52 4.64 3.19 0.47 1.81
IPHTONZ 1.5 2705344 10.0 0 - 2.38 4.80 0.63 0.86 3.86 6.03 4.33 0.63 2.05
IPHTONZ 3 2705477 15.0 0-2.38 4.61 0.78 1.03 3.86 6.42 4.72 0.78 2.72
IPHTONZ 4.5 2705483 20.0 0 - 2.38 5.20 0.98 1.19 3.89 7.20 5.13 0.78 2.72
IPHTONZ 6 2705484 24.5 0-2.38 5.20 1.00 1.42 4.25 8.39 5.13 0.78 2.72
IPHTONZ 9 2705485 34.5 0-2.38 6.19 1.19 1.69 4.64 8.78 5.52 1.00 3.41
IPHTONZ IPHTONZ 12 2705486 42.0 0 - 2.38 6.77 1.19 1.84 5.28 10.00 5.91 1.00 3.47
The IPHTONZ horizontal lifting clamps are for use
in the lifting and transfer in horizontal position of IPHTONZ 15 2705487 51.0 0 - 2.38 7.81 1.19 1.84 5.67 11.19 7.88 1.00 3.47
non-sagging materials or of bundles of non-sagging IPHTONZ 25 2705119 86.0 0 - 2.38 6.66 1.58 1.84 6.69 11.81 8.66 1.27 4.45
material. These clamps must be used in pairs or more.
Ultimate load is 5 times the Working Load Limit.

TITAN 2014 / 2015 CATALOGUE 61

HOISTING EQUIPMENT
TRIFORS

Tirfor Wire Rope Winch

The TIRMASTER is a light, powerful portable Model No. T-7 T-13 T-35
winching and hoisting unit that is easy to Lifting Capacity 1700 lbs 3300 lbs 6600 lbs
move and use. By moving the telescopic Pulling Capacity 2800 lbs 5500 lbs 11000 lbs
handle up and down, the wire rope passes Test to: 3300 lbs 6600 lbs 13200 lbs
straight through the TIRMASTER as if Length of Telescopic Handle 30” 41” 45”
were hauled hand over hand, by means of
Wire Rope Size 5
/16 in (8.3 mm) 7
/16 in (11.1 mm) /8 in (16 mm)
5

two jaw blocks inside the unit. This basic

Net Weight 17 lbs (8 kg) 48 lbs (22 kg) 61 lbs (27 kg)
principle ensures maximum safety as the
load is automatically held secure. One set of Features: Typical Uses:
jaws will not release until the other set takes
- Lightweight and Small - Steel Erecting
the load.
- Wire Rope is drawn straight through unit - Suspended Scaffolding
for continuous use - Cable Tensioning
- Equipped with Safety Hook - Demolition
- Unit can be used at any working degree - Moving Machinery
- Fastest transmission speed - Formwork Removal
- Pipe Laying
- Police & Fire Emergency Work
- Logging
- Hunting
- Moving Stuck 4 x4’s
- Moving Freight Cars

62 TITAN 2014 / 2015 CATALOGUE

HOISTING EQUIPMENT
WINCHES

ELECTRIC WINCHES
WS Series

Capacities 600 lbs 26,000 lbs

Line Speeds 1 fpm 100 + fpm
Travel Distance 1ft 400 + ft
H.P. 1 30 +
4WS Models 1M 3M 6M 9M 16M 26M

HS Series

Capacities 1100 lbs 56,000 lbs

Line Speeds 1 fpm 100 + fpm
Travel Distance 1 ft 5000 + ft
H.P. 1 50
4HS Models 6M 11M 16M 26M 40M 56M

HWF Series HPF Series

Capacities 1000 lbs 8,000 lbs Capacities 1000 lbs 56,000 lbs
Line Speeds 1 fpm 50 + fpm Line Speeds 1 fpm 600 + fpm
Travel Distance 1ft 2,000 + ft Travel Distance 1ft 10,000 + ft
H.P. 1 15 + H.P. 2 50 +
4HWF Models 1M 2M 4M 6M 8M 4HPF Models 2M 5M 9M 15M 20M 25M 40M 56M

HPB Series

Capacities 35,000 lbs 100,000 lbs

Line Speeds 1 fpm 400 + fpm
Travel Distance 1ft 12,000 + ft
H.P. 2 400 +
4HBP Models 35M 100M

TITAN 2014 / 2015 CATALOGUE 63

HOISTING EQUIPMENT
WINCHES

AIR WINCHES
Mini Series

Capacity 0 to 1000 lbs 2000 lbs

Line Speed 50 fpm 66 fpm
H.P. 1.35 3.5
Series Mini Mini
Model MTA .5 MTA 1

Legacy Series

Capacity 0 to 7200 lbs 7200 lbs 18,000 lbs 23,600 lbs 37,000 lbs
Line Speeds 46 fpm 114 fpm 47 fpm 29 fpm 34 fpm
Travel Distance 7.1 18.3 17.8 14.4 27
H.P. Big Red Big Red Big Red Big Red Big Red
4HBP Models TA2 TA2.5 TA5 TA7 TA10

Rider Series

Capacity 0 to 2900 lbs 3100 lbs 6900 lbs

Line Speed 70 fpm 162 fpm 74 fpm
H.P. 6.8 16.2 16.7
Model TA2P TA2.5P TA5P

64 TITAN 2014 / 2015 CATALOGUE

HOISTING EQUIPMENT
WINCHES

DNV CE ATEX DEDICATED

C Series Man Rider

Capacity 0 to 5000 lbs 10,000 lbs 37,000 lbs Capacity 0 to 330 lbs
Line Speed 46 fpm 46 fpm 46 fpm Line Speed 75 fpm
Series Cyclone Cyclone Cyclone Series Cyclone
Model TAC2.5 TAC5 TAC10 Model TA150MR1

HAND WINCHES

Spur Gear Worm Gear

Capacity 0 to 1000 lbs 2000 lbs 2000 lbs 4000 lbs 10,000 lbs 1000 lbs 2000 lbs 4000 lbs
Gear Ratio 3:1 15:1 15:1 25:1 25:1 15:1 32:1 26:1
Aprox. Weight 17 lbs 28 lbs 28 lbs 83 lbs 166 lbs 12 lbs 41 lbs 113 lbs
Model M4022PB M4321PB M4321PBSS M452B M492B 4622PB 4WM2 482B

PORTABLE ELECTRIC
WINCHES

Max Capacity 2000 lbs 1500 lbs 2000 lbs 4600 lbs
Line Speed 19 fpm 97 fpm 22 fpm 24 fpm
H.P. 1.3 3 1.5 3
Series Atlas Atlas Dura Hoist Atlas II
Model 4WP2T8 4WP2D8 4771 3WG4

TITAN 2014 / 2015 CATALOGUE 65

HOISTING EQUIPMENT
SPREADER BARS
The Caldwell Group

Model 30HC - High Capacity Spreader Beam

Caldwell’s new High Capacity Spreader Beam is the solution you Specifications
need to fill those orders where a quick delivery is required on beams
Spread in Feet
with capacities ranging from 5 to 130 tons!
6 8 10

Product Features: 50 ton 30HC - 50 - 6 30HC - 50 - 8 30HC - 50 - 10

Weight (lbs.)* 420 460 760
- Unique pivoting lower lugs allow for 75° to 90° lower rigging angle.
HR at 45° (in.) N/A N/A 92
- Capacities from 5 to 130 tons. HR at 60° (in.) 94 114 136
- Beam only available in 7 - 10 days. Bottom Shackle 25 Ton BTAS 25 Ton BTAS 25 Ton BTAS
Top Shackle 35 Ton BTAS 35 Ton BTAS 35 Ton BTAS
- Optional wire rope top rigging available.
- Complies with ASME standards. 60 ton 30HC - 60 - 8 30HC - 60 - 10
Weight (lbs.)* 840 920
HR at 45° (in.) 84 96
HR at 60° (in.) 120 140
Bottom Shackle 55 Ton BTAS 55 Ton BTAS
Top Shackle 55 Ton BTAS 55 Ton BTAS

70 ton 30HC - 70 - 8 30HC - 70 - 10

Weight (lbs.)* 840 920
HR at 45° (in.) 84 96
HR at 60° (in.) 120 140
Bottom Shackle 55 Ton BTAS 55 Ton BTAS
Top Shackle 55 Ton BTAS 55 Ton BTAS

80 ton 30HC - 80 - 8 30HC - 80 - 10

Weight (lbs.)* 840 920
HR at 45° (in.) 84 N/A
HR at 60° (in.) 120 140
Bottom Shackle 55 Ton BTAS 55 Ton BTAS
Top Shackle 55 Ton BTAS 55 Ton BTAS

90 ton 30HC - 90 - 8 30HC - 90 - 10

Shown With Chain Rigging Weight (lbs.)* 1420 1600
(Used only for small capacity and span beams) HR at 45° (in.) 84 96
HR at 60° (in.) 120 140
Bottom Shackle 55 Ton BTAS 55 Ton BTAS
Top Shackle 85 Ton BTAS 85 Ton BTAS

100 ton 30HC - 100 - 8 30HC - 100 - 10

Weight (lbs.)* 1420 1600
HR at 45° (in.) 84 96
HR at 60° (in.) 120 140
Bottom Shackle 55 Ton BTAS 55 Ton BTAS
Top Shackle 85 Ton BTAS 85 Ton BTAS

110 ton 30HC - 110 - 8 30HC - 110 - 10

Weight (lbs.)* 1420 1600
HR at 45° (in.) 84 96
HR at 60° (in.) 120 140
Bottom Shackle 55 Ton BTAS 55 Ton BTAS
Top Shackle 85 Ton BTAS 85 Ton BTAS

120 ton 30HC - 120 - 8 30HC - 120 - 10

Weight (lbs.)* 1450 1620
HR at 45° (in.) 96 108
HR at 60° (in.) 130 152
Shown With Wire Rope Rigging Bottom Shackle 85 Ton BTAS 85 Ton BTAS
(Not available in our QuickShip Program) Top Shackle 85 Ton BTAS 85 Ton BTAS

130 ton 30HC - 130 - 8 30HC - 130 - 10

Weight (lbs.)* 1450 1620
HR at 45° (in.) 96 108
HR at 60° (in.) 130 152
Bottom Shackle 85 Ton BTAS 85 Ton BTAS
Top Shackle 85 Ton BTAS 85 Ton BTAS

66 TITAN 2014 / 2015 CATALOGUE

HOISTING EQUIPMENT
SPREADER BARS
The Caldwell Group

Capacity and spread configurations are virtually limitless. 5 tons, online at [Link]. For beam customizations, please
The chart below highlights sizes available from 50 to 130 tons. You can fill out an application evaluationform online or contact us with complete
review our complete high capacity spreader beam chart, starting at details and we will configure the high capacity spreader beam you need!

Spread in Feet
12 16 20 24 28 32 36 40

30HC - 50 - 12 30HC - 50 - 16 30HC - 50 - 20 30HC - 50 - 24 30HC - 50 - 28 30HC - 50 - 32 30HC - 50 - 36 30HC - 50 - 40

850 1020 1190 1370 1540 1710 3750 4010
104 128 152 N/A N/A N/A 254 278
156 198 240 282 324 364 412 454
25 Ton BTAS 25 Ton BTAS 25 Ton BTAS 25 Ton BTAS 25 Ton BTAS 25 Ton BTAS 55 Ton BTAS 55 Ton BTAS
35 Ton BTAS 35 Ton BTAS 35 Ton BTAS 35 Ton BTAS 35 Ton BTAS 35 Ton BTAS 55 Ton BTAS 55 Ton BTAS

30HC - 60 - 12 30HC - 60 - 16 30HC - 60 - 20 30HC - 60 - 24 30HC - 60 - 28 30HC - 60 - 32 30HC - 60 - 36 30HC - 60 - 40

1010 1190 1360 1530 1710 1880 3750 4100
108 132 N/A N/A N/A N/A 254 278
162 204 246 286 328 370 412 454
55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS
55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS

30HC - 70 - 12 30HC - 70 - 16 30HC - 70 - 20 30HC - 70 - 24 30HC - 70 - 28 30HC - 70 - 32 30HC - 70 - 36 30HC - 70 - 40

1010 1190 2330 2690 3040 3400 3750 4100
N/A N/A 156 180 204 230 254 278
162 204 246 286 328 370 412 454
55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS
55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS

30HC - 80 - 12 30HC - 80 - 16 30HC - 80 - 20 30HC - 80 - 24 30HC - 80 - 28 30HC - 80 - 32 30HC - 80 - 36 30HC - 80 - 40

1010 1190 2330 2690 3040 3400 3750 4100
N/A N/A 156 180 204 230 254 278
162 204 246 286 328 370 412 452
55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS
55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS

30HC - 90 - 12 30HC - 90 - 16 30HC - 90 - 20 30HC - 90 - 24 30HC - 90 - 28 30HC - 90 - 32 30HC - 90 - 36 30HC - 90 - 40

1780 2130 2490 2840 3200 3550 3900 4260
108 132 156 180 204 230 254 N/A
162 204 246 286 328 370 412 452
55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS
85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS

30HC - 100 - 12 30HC - 100 - 16 30HC - 100 - 20 30HC - 100 - 24 30HC - 100 - 28 30HC - 100 - 32 30HC - 100 - 36 30HC - 100 - 40
1780 2130 2490 2840 3200 3550 3900 4260
108 132 156 180 204 230 N/A N/A
162 204 246 286 328 370 412 452
55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS
85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS

30HC - 110 - 12 30HC - 110 - 16 30HC - 110 - 20 30HC - 110 - 24 30HC - 110 - 28 30HC - 110 - 32 30HC - 110 - 36 30HC - 110 - 40
1780 2130 2490 2840 3200 3550 3900 4260
108 132 156 180 204 N/A N/A N/A
162 204 246 286 338 370 412 452
55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS 55 Ton BTAS
85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS

30HC - 120 - 12 30HC - 120 - 16 30HC - 120 - 20 30HC - 120 - 24 30HC - 120 - 28 30HC - 120 - 32 30HC - 120 - 36 30HC - 120 - 40
1800 2150 2500 2860 3220 3570 3820 4280
120 144 168 192 N/A N/A N/A N/A
172 216 256 298 340 380 422 462
85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS
85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS

30HC - 130 - 12 30HC - 130 - 16 30HC - 130 - 20 30HC - 130 - 24 30HC - 130 - 28 30HC - 130 - 32 30HC - 130 - 36
1800 2150 2500 2860 3220 3570 3920
120 144 168 N/A N/A N/A N/A
172 216 256 298 340 380 422
85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS
85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS 85 Ton BTAS

TITAN 2014 / 2015 CATALOGUE 67

HOISTING EQUIPMENT
SPREADER BARS
The Caldwell Group

Model 32 - Adjustable Spreader Beams

Product Features: - Available with Adjust-A-Leg® rigging
- Ideal where headroom is not limited. for off center load adjustment (minimum
lifting capacity will be approximately
- Adds stability to lift.
10-15% of beam rating).
- Telescopic spread standard.
- Wide range of additional sizes and
- Spread adjusts in 1” increments. capacities available.
- Available with standard chain or - Complies with ASME standards.
wire rope rigging.
B
A
C

Shown with Option C 45°

Specify Top Rigging

SPREAD

O
Specifications
HR Headroom Weight A B C F - Hook O - Hook Chain
Model Spread Min./Max. Beam & Oblong Oblong Oblong To Beam Opening Rigging
Capacity Number Min./Max. w/chain Hooks Dia. Width Height Bottom w/latch Weight
(tons) (ft.) (in.) (lbs.) (in.) (in.) (in.) (in.) (in.) (lbs.)

32-2-4/6 4/6 48/57 70 9

2 32-2-6/10 6 / 10 72/88 85 1/2 2.36 3.94 5.5 0.97 13
32-2-8/14 8 / 14 96/113 175 17
32-2-12/20 12 / 20 132/166 245 23
32-5-4/6 4/6 55/64 105 34
5 32-5-6/10 6 / 10 79/95 160 1 5.38 7.09 8.4 1.41 47
32-5-8/14 8 / 14 102/126 205 61
32-5-12/20 12 / 20 138/172 670 82
32-10-4/6 4/6 60/69 95 49
10 32-10-6/10 6 / 10 74/111 175 1-1/4 5.71 10.83 10.6 1.78 69
32-10-8/14 8 / 14 108/132 460 88
32-10-12/20 12 / 20 144/163 680 118
32-15-4/6 4/6 64/72 165 78
15 32-15-6/10 6 / 10 87/104 365 1-1/2 5.90 10.5 13.6 2.22 111
32-15-8/14 8 / 14 111/135 478 145
32-15-12/20 12 / 20 147/180 700 194

TOP RIGGING OPTIONS

OPTION C OPTION W
Chain top rigging from Wire rope top rigging from
beam to crane hook. beam to crane hook.

68 TITAN 2014 / 2015 CATALOGUE

HOISTING EQUIPMENT
SPREADER BARS
The Caldwell Group

Model 32 - Adjustable Spreader Beams

Product Features:
- Ideal where headroom is not limited. - Telescoping adjustment at 12 inch
- Adds stability to lift. increments.
- Choose from a wide range of sizes - Select chain or wire rope top rigging.
and capacities. - Custom designs available.
- Complies with ASME standards.

B
A
C

Shown with Option C 45°

Specify Top Rigging

SPREAD

Specifications
Beam A B C F - Hook O - Hook Chain
Model Spread Headroom & Hook Oblong Oblong Oblong To Beam Opening Rigging
Capacity Number Min./Max. Min./Max. Weight Dia. Width Height Bottom w/latch Weight
(tons) (ft.) (in.) (lbs.) (in.) (in.) (in.) (in.) (in.) (lbs.)

32-20-7/11 7 / 11 93/107 430 175

20 32-20-9/15 9 / 15 123/144 540 1.75 6.0 12.0 14.2 2.27 225
32-20-12/20 12 / 20 151/180 822 275
32-25-7/11 7 / 11 98/107 430 240
25 32-25-9/15 9 / 15 119/141 540 2 7.0 14.0 14.2 2.27 295
32-25-12/20 12 / 20 149/179 825 365
32-30-7/11 7 / 11 102/115 615 240
30 32-30-9/15 9 / 15 124/145 750 2 7.0 14.0 18.3 3.02 295
32-30-12/20 12 / 20 154/183 1065 365
32-40-7/11 7 / 11 105/118 620 375
40 32-40-9/15 9 / 15 127/148 840 2.25 8.0 16.0 18.3 3.02 470
32-40-12/20 12 / 20 154/184 1500 565

TOP RIGGING OPTIONS

OPTION C OPTION W
Chain top rigging from Wire rope top rigging from
beam to crane hook. beam to crane hook.

TITAN 2014 / 2015 CATALOGUE 69

WIRE ROPE
WIRE ROPE

Wire rope product options for Shovels

TUF-MAX® ROPES TEST RESULTS PROVE USING TUF-MAX
The most fatigue-resistant ropes we offer for MAXIMIZES SERVICE LIFE
shovel hoist applications, TUF-MAX® ropes The chart below shows averaged results from a study
provide increased abrasion resistance. Such performed on 4100s with TUF-MAX ropes vs. a competitor’s
advantages, combined with the qualities of rope.
an 8-strand rope and the toughness of PFV®
ropes, result in maximum service for more
digging time between rope changes. What does 15 percent more service life mean? It could mean
one more PM, reduced shovel downtime, and a better cost
TUF-MAX benefit to using Union TUF-MAX shovel ropes to increase
operational performance of your mine.
TUF-MAX™ CR ROPES
This crowd and retract rope was specifically
designed to minimize stretch. This rope has
been tested and proven to provide the best
performance as crowd and retract ropes.

TUF-MAX CR

7-FLEX PFV ROPES

For trip rope applications, combining the
advantages of PFV, extruded into a 7-Flex
lubricated wire rope, provides additional
advantages over non-PFV ropes.

7-FLEX PFV

6-STRAND ROPES
Also for trip rope applications, 6-strand ropes
are backed by a service-proven reputation
and are engineered to withstand abrasion
and fatigue.

6 STRAND

6-STRAND PFV ROPES

Designed and manufactured to the same
exacting standards as our 6-strand ropes,
these ropes are plastic-impregnated. The
plastic polymer is applied at high pressure,
cushions the strands, distributes internal
stresses, keeps in wire rope lubricant and
keeps out dirt and debris.
6 STRAND PFV

70 TITAN 2014 / 2015 CATALOGUE

WIRE ROPE
WIRE ROPE

Wire rope product options for Draglines

POWERMAX MD POWERMAX PFV
This unique drag rope was designed This fully PFV’d version of our class-leading Powermax dragline
specifically for exceptional performance and hoist and drag ropes is now offered in diameters up to 5”. The
extended service life on draglines with reverse advanced polymers used in Powermax PFV help seal lubricant
bend fairlead systems. With unique metallurgy, within the rope, cushion the steel rope components from radial
8-strand construction and Union’s exclusive stresses, and provide exceptional abrasion resistance where
compaction process, PowerMax MD ropes harsh digging conditions exist. Powermax PFV constructions
have set industry standards for drag rope also use balanced wire diameters to ensure proper resistance
POWERMAX MD performance and service life. to bending fatigue while maintaining great protection from
wire wear.
Built around a plastic-impregnated
independent wire rope core (IWRC) are eight POWERMAX™
compacted strands of cold-drawn, high-carbon
PowerMax is an 8-strand wire rope created to provide operating
steel wires, a construction that delivers the
characteristics essential to drag ropes and hoist ropes. Our
optimal combination of strength and resistance
proprietary metallurgy was utilized in developing special rod
to bending fatigue and abrasion.
chemistry requirements to provide optimum wire characteristics
for mining ropes. The technology combines all aspects of rope
With eight outer strands fortifying the
POWERMAX PFV manufacturing in one cohesive process that assures a product
compacted-strand design of PowerMaxMD, that’s second to none.
this rope delivers approximately 10% higher
minimum breaking strength than standard
With eight outer strands, PowerMax is more fatigue resistant
6-strand drag ropes and also supplies the
than 6-strand ropes of the same diameter, plus, its greater
fatigue resistance to handle the bending
surface area puts more steel in touch with contact surfaces,
stresses at the fairleads. The strand
reducing wear and abrasion. Just as importantly, no other mining
compaction puts a wider, smoother outer rope
rope is subjected to more rigorous standards of manufacturing
surface in contact with the sheaves and drums
than PowerMax. The industry’s highest manufacturing standards,
for much greater abrasion resistance, as well.
continuous tracking and testing, and the use of enhanced
plastics in core impregnation give PowerMax a clear-cut edge
POWERMAX The specific combination of rope in drag rope performance.
characteristics found in PowerMax MD delivers
more hours and more yards – with fewer rope
changes. 6-STRAND PFV
This fully PFV’d version of our 6-strand hoist and drag ropes
combine the advantages of plastic enhanced wire ropes with
the special wire chemistry of our conventional 6-strand surface
mining ropes. Six-strand PFV ropes help seal lubricant within
the rope, cushion the steel rope components from radial stresses
and impact damage, and combined with large wire diameters
6-STRAND PFV with special wire chemistry provide exceptional abrasion
resistance for systems using straight through
fairlead arrangements.

The increased surface area of compacted ropes can 6-STRAND HOIST AND DRAG ROPES
be seen in the comparison of the contact points of a
standard rope (left) and a compacted rope (right). Backed by a service-proven reputation, these ropes are built
tough, using special wire chemistry and optimized constructions
to withstand abrasion and fatigue. Union 6-strand ropes provide
great service life in draglines with straight through fairlead
arrangements. These ropes are available in right lang lay (RL)
6 STRAND and left lang lay (LL) with a standard independent wire rope core.

TITAN 2014 / 2015 CATALOGUE 71

WIRE ROPE
WIRE ROPE

XLTLT4: Extremely low torque – extremely high strength

From Union comes a revolutionary crane Faster, more efficient crane Easy to install. Easy to use.
rope design called XLT4*. “XLT” because operation. While XLT4’s unique construction is
it has extremely low torque; “4” because different in appearance and feel compared
XLT4’s powerful advantages go beyond
it has the minimum breaking force of a to other wire ropes, you’ll be pleasantly
high strength, low torque and economical
6-strand XXXXIP (4X) IWRC rope. surprised by the way it spools and
cost. With the rope’s high capacity, lifts
may be feasible using fewer parts of operates. As with any wire rope, proper
More lift. Less torque. Lower cost. line – boosting the speed, efficiency installation is key – particularly for the
What sets XLT4 apart from other ropes is and productivity of crane work. base layers and all layers that do not come
its unique design, which packs more high- off the drum during normal operation.
tensile steel wire into the rope’s diameter, XLTLT4 Specifications To maximize performance and to avoid
giving XLT4 one of the highest strength- “pull-in”, the rope must be spooled on the
nominal nominal minimUm aPProX
to-diameter ratios ever achieved – with a diameter diameter breaking forCe weight drum under load, ensuring that the rope is
minimum breaking force 33% higher than inches inches tons of 2000 lbs. lbs /ft both tight against adjacent wraps and tight
standard 6-strand XIP ropes. 12 15.8 .045 around the drum. As with any wire rope,
1/2 17.7 .051 XLT4 will perform better on a grooved
Under load, XLT4 generates near- 14 21.4 .061 drum.
zero torque, matching or surpassing 9/16 22.3 .065
the stability of Category 1 35 x 7 class 5/8 27.4 .079 Although differing in appearance and feel,
rotation-resistant ropes. Yet, thanks to its 16 27.8 .079 field experience has shown that XLT4
unique design, XLT4 is not classified as a 19 39.0 1.1 presents no problems in terminations
“rotation-resistant” rope. It can be used 3/4 39.2 1.1 using wedge sockets or wire rope clips.
with or without a swivel as a mobile crane 22 52.0 1.5 XLT4 requires no special end preparation.
hoist rope at design factors as low as 7/8 53.0 1.5
3.5 to 1. 23 56.8 1.6
24 61.7 1.8
And, for value, nothing performs like 1 68.9 2.1
XLT4. Not only does it cost less than a 26 72.1 2.1
35 x 7 classification rope, its compact 28 83.3 2.4
construction keeps moore steel in contact 1-1/8 86.7 2.6
with sheaves and drums for unmatched
resistance to crushing and wear – for *Patent Pending
lower maintenance, less downtime and
longer service life.

72 TITAN 2014 / 2015 CATALOGUE

WIRE ROPE
SAND LINES

PFV® PLASTIC-IMPREGNATED ROPES

PFV, the plastic-impregnated wire rope, has PFV cushions the strands, distributes
proven in many applications to give you internal stresses, keeps in wire rope
longer service life and cleaner operation lubricant and keeps out dirt and debris.
than conventional wire ropes.
PFV doesn’t melt or soften from the heat
On the inside, you’ll find our top-of-the- of normal operating temperatures. It’s also
line wire rope that effectively withstands virtually unaffected by sunlight and cold POLYMER PENETRATION
the tough pressures of your demanding weather. The result is longer service life from With one strand and part of the polymer removed, you
can see how deep the polymer penetrates into the rope,
jobs. On the outside, you’ll see a specially your wire rope. giving you uniform and continuous support for all strands
engineered polymer plastic designed to throughout the length of the rope.
overcome even harsher conditions. This PFV also helps shed water and dirt, giving
polymer is applied at high pressure to force you a clean, smooth surface to make it easy as it extends the service life of your sheaves
the material into the rope, filling the valleys to pass over sheaves and onto drums. This and drums, while also reducing your cleanup
of the strands. smooth surface works to clean and polish requirements and your maintenance costs.
RECOMMENDED WIRE ROPES FOR YOUR APPLICATIONS
HOIST ROPES but minimal stretch characteristics are are required for trip ropes. 7-Flex and
On properly maintained equipment, necessary to maintain proper rope 7-Flex PFV have the best characteristics
strength and fatigue resistance are the tightness in the crowd and retract system. to maximize rope service life in this
primary characteristics to utilize. TUF-MAX Our new TUF-MAX CR is specifically application.
provides the best combination of these designed with these characteristics in mind
factors and as a result has been the leading to provide the best service life as crowd BOOM PENDANTS
shovel hoist rope for several years. and retract ropes.
Pendants are generally specified by the
shovel manufacturer. Rope and structural
CROWD AND RETRACT ROPES TRIP ROPES strand pendants are both available from
Most ropes wear out due to fatigue, Good resistance to wear and fatigue Union.

6x36 IWRC 6x36 IWRC Strength and Weights Chart (inches)

Minimum Breaking Force (tons of 2000 lbs.)
- Standard riser tensioner rope Diameter Weight IPS XIP XXIP
(in) (lb/ft)
- Wears well
- Provides good service life 1 1/2 4.16 98.9 114 125
1 5/8 4.88 115 132 146
1 3/4 5.67 133 153 169
1 7/8 6.50 152 174 192
2 7.39 172 198 217
2 1/8 8.35 192 221 244
2 1/4 9.36 215 247 272
2 3/8 10.4 239 274 –
2 1/2 11.6 262 302 –
2 5/8 12.8 288 331 –
The 6x36 classification of wire ropes 2 3/4 14.0 314 361 –
includes standard 6 strand, round strand 2 7/8 15.3 341 392 –
ropes with 27 through 49 wires per strand. 3 16.6 370 425 –

Union, a WireCo WorldGroup brand, produces wire rope and special rope assemblies
The 6x36 ropes are important for their for a variety of applications – each with their own exacting specifications. We employ the
fatigue resistance. This fatigue resistance most experienced, talented, licensed engineers in the industry to design solutions for
is made possible by the greater number of your application. Nine manufacturing operations and seven distribution centers in North
small wires per strand. America, plus manufacturing facilities in Germany, Poland and Portugal, give our customers
unparalleled support and global reach. Find out for yourself why Union wire ropes have
proven themselves time and time again in the field. Union: Tested, Tough & True.

TITAN 2014 / 2015 CATALOGUE 73

WIRE ROPE
GENERAL PURPOSE

6x36WS – IWRC Nominal

diameter
Approximated weight
of the rope
Minimum breaking force for nominal strength of wires

1570 N/mm2 1770 N/mm2 1960 N/mm2

mm kg/100m kN kN kN
8.0 26.2 35.8 40.3 44.7
9.0 33.1 45.3 51.0 56.5
10.0 40.9 55.9 63.0 69.8
11.0 49.5 67.6 76.2 84.4
12.0 58.9 80.5 90.7 100
13.0 69.1 94.5 106 118
14.0 80.2 110 124 137
15.0 92.0 126 142 157
16.0 104.7 143 161 179
17.0 118.2 162 182 202
18.0 132.5 181 204 226
19.0 147.6 202 227 252
20.0 163.6 224 252 279
22.0 198.0 271 305 338
23.0 216.4 296 333 369
24.0 235.6 322 363 402
25.0 255.6 349 394 436
26.0 276.5 378 426 472
27.0 298.2 407 459 509
28.0 320.7 438 494 547
30.0 368.1 503 567 628
32.0 418.8 572 645 715
34.0 472.8 646 728 807
36.0 530.1 724 817 904
38.0 590.6 807 910 1,008
40.0 654.4 894 1,008 1,116
42.0 721.5 986 1,112 1,231
44.0 791.8 1,082 1,220 1,351
46.0 865.4 1,183 1,333 1,476
48.0 942.3 1,288 1,452 1,608
50.0 1,022.5 1,397 1,575 1,744
52.0 1,105.9 1,511 1,704 1,887
54.0 1,192.6 1,630 1,837 –
56.0 1,282.6 1,753 1,976 –

74 TITAN 2014 / 2015 CATALOGUE

WIRE ROPE
OILFIELD ROPES

When you purchase Union’s tubing lines, you get more than what rope manufacturing for full traceability. They don’t stop there; the
meets the eye. Built in an ISO 9001 certified factory and backed by traceability continues into the field as each schedule is tracked to
the industry’s largest staff of professional engineers, Union does the customer. Throughout the manufacturing process Union will
more than produce to spec. break test wires and tie that information to the coil and/or reel of
rope. Thus ensuring that they know the characteristics of the rope
Union’s quality begins with their raw material qualification process from its infancy and know it meets or exceeds Union’s published
which suppliers must meet standards that are more stringent strengths.
than industry. Then, Union documents rod coils though complete

6x31 Swaged Diameter

6x31 Swaged Strength and Weights Chart
Approx. Weight Minimum Breaking Force
Swaged Tubing Lines (in) (lb/ft) (tons of 2000 lbs.)

- High density construction for greater 1 2.22 62

crushing and abrasion resistance
- Greater strength
Well servicing rigs must work wherever producing wells need with one end spooling on the second layer of wraps immediately
servicing. One of the primary ropes on these mobile rigs is the adjacent to the other end spooling on the first layer of wraps.
tubing line. The tubing line operates on the main draw works and This is called “double fast line” spooling and is done to speed
is reeved through the traveling block for handling tubing and rod. up travel time of the main hoist during rod and tubing pulling
Often the tubing line is rigged with both ends attached to the drum operations.

6x26 Tubing Line 6x26 Tubing Line IWRC Strength and Weights Chartt
Minimum Breaking Force
IWRC
Diameter Approx. Weight IPS XIP
- Compact construction (in) (lb/ft) (tons of 2000 lbs.)

- Crush resistant 3/4 1.04 29.4 32.4

- Excellent fatigue resistance 7/8 1.42 39.8 43.8
1 1.85 51.7 56.9
The 6x26 WS features a compact construction with solid support
for the wires; therefore it has a high resistance to crushing and
well suited for tubing lines. Its number and relative size of the
inner wires add to the stability of the strand and gives it excellent speed up travel time of the main hoist during rod and tubing pulling
fatigue resistance. Since the “double fast line” is often used to operations, fatigue resistance is an important benefit.

Flex-X 9 Diameter
6x31 Swaged Strength and Weights Chart
Approx. Weight Minimum Breaking Force
Swaged Tubing Lines (in) (lb/ft) (tons of 2000 lbs.)

- Crush resistantt 5/8 0.90 26.2

- Abrasion resistant 3/4 1.30 37.4
- Greater surface area 7/8 1.79 50.6
1 2.33 65.7
Flex-X 9 features compacted strands and swaging for extra drum
1 1/8 2.93 82.7
crushing resistance and increased stability. Its high density strands
deliver extra strength and resistance to abrasion. Flex-X 9 is
manufactured with a dual compaction process to produce a com
pact cross-section with minimum voids and greater surface area nicking at strand-to-strand contact points. Flex-X 9 was specifically
on outer wires that contact drums, sheaves and the rope, itself designed for boom hoist applications and tubing line applications
during operation. The high-density compacted strands minimize where drum crushing is a challenge.

TITAN 2014 / 2015 CATALOGUE 75

WIRE ROPE
OILFIELD ROPES

Well Measuring Wire Well Measuring Wire Strength and Weights Chart (inches)
Minimum Breaking Force
- Conforms to API-9A for diameter tolerance and Diameter Approx. Wire Weight IPS XIP XXIP
torsion requirements (lbs.)
- Can be shipped on wood or metal reels
0.066 0.012 811 960 994
- Extensive inspection and quality control during
0.072 0.014 961 1150 1178
manufacturing and packaging
0.082 0.018 1239 1460 1517
0.092 0.023 1547 1830 1895
Union well measuring wire conforms in all cases to
0.105 0.03 1966 2360 2449
API-9A for diameter tolerance and torsion requirements.
0.108 0.032 2109 2490 2581
Other sizes are available upon request and lengths in
0.125 0.042 2794 3300 3418
excess of 25,000 feet are available.
0.128 0.044 2924 3450 3584

Wire can be shipped on wood or metal reels as you

require. Remember the shipping reel is not designed for
use as a tensioning device. Using the reel in this manner Well Measuring Wire Strength and Weights Chart (millimeters)
may cause significant spooling problems. End users Minimum Breaking Force
should follow API recommendations for transferring the Diameter Approx. Wire Weight IPS XIP XXIP
wire from the shipping reel to the unit drum. Tension (lbs.)
should be applied to the wire, not the reel.
1.68 0.018 811 960 994
1.83 0.021 961 1150 1178
2.08 0.027 1239 1460 1517
2.34 0.034 1547 1830 1895
2.67 0.045 1966 2360 2449
2.74 0.048 2109 2490 2581
3.18 0.062 2794 3300 3418
3.25 0.065 2924 3450 3584

76 TITAN 2014 / 2015 CATALOGUE

CRANE COMPONENTS
CRANE ROPES

A WireCo® WorldGroup Brand

CASAR STARLIFT XTRA

PROPERTIES

APPLICATIONS
A premier hoist rope that provides the highest level strength
available for main and auxiliary hoist applications on tower cranes,
mobile cranes, and crawler cranes as well as other applications
where rotation resistant ropes are required. Especially suited for
multiple layer spooling.

OVERVIEW nominal diameter weight minimum breaking force

inch mm lb/ft t [2000 lbs] lbs
Number
Number outer load Average 14 0.67 23.38 46,760
Diameter of outer Number bearing Average weight Average 15 0.77 26.42 52,830
range strands of wires wires fill factor factor spin factor
5/8 16 0.88 30.57 61,148
[mm]
17 0.99 33.95 67,892
14 –22 16 245 112 18 1.12 38.22 76,435
25,4– 26 16 405 272 3/4 19 1.24 42.94 85,877
0,730
28 16 341 208 20 1.38 47.32 94,645
30 –36 16 405 272 21 1.52 51.71 103,412
7/8 22 1.67 57.21 114,428
- Standard tolerance on diameter +0% to +4% 1 25.4 2.22 75.87 151,746
- Temperature range of use: –50°C to +75°C 26 2.33 79.25 158,490
- Suitable for multilayer spooling in Lang‘s lay 28 2.69 91.61 183,219
- Available in ordinary lay and Lang‘s lay 30 3.09 104.99 209,972
1 1/4 32 3.51 121.96 243,918
- Available in right hand and left hand
34 3.97 134.89 269,771
- Available in galvanized and ungalvanized
36 4.46 150.62 301,244

TITAN 2014 / 2015 CATALOGUE 77

CRANE COMPONENTS
CRANE ROPES

CRANE COMPONENTS
CRANE ROPES

OLIVEIRA HD 8K / HD 8 K PPI
minimum breaking force
nominal diameter weight 1960 N/mm² 2160 N/mm²
inch mm lb/ft t [2000 lbs] lbs t [2000 lbs] lbs

8 0.19 6.52 13,039

9 0.24 8.27 16,535
3/8’’ 9.5 0.26 8.95 17,899
10 0.31 10.39 20,772
7/16’’ 11 0.37 12.59 25,179
12 0.44 14.21 28,415 14.90 29,800
1/2’’ 12.70 0.48 15.51 31,015 16.26 32,526
13 0.52 16.75 33,491 17.56 35,123
14 0.60 19.46 38,922 20.41 40,819
9/16’’ 14.30 0.62 19.93 39,863 20.90 41,805
15 0.69 22.61 45,228 23.72 47,432
5/8’’ 16 0.77 24.87 49,734 26.08 52,158
PROPERTIES 18 0.99 32.05 64,098 33.61 67,221
3/4’’ 19 1.10 35.34 70,674 37.06 74,118
20 1.24 39.85 79,692 41.79 83,576
7/8’’ 22 1.46 47.07 94,146 49.37 98,734
24 1.71 57.29 114,577 60.08 120,160
1’’ 25.40 1.94 62.65 125,290 65.70 131,396
26 2.05 66.19 132,386 69.42 138,838
28 2.39 77.08 154,167 80.84 161,680
APPLICATIONS 1 1/8’’ 28.60 2.46 79.52 159,043 83.40 166,793
30 2.77 89.29 178,583 93.64 187,286
When rotation resistant ropes are not required (twin hoist systems
1 1/4’’ 32 3.15 101.75 203,499 106.71 213,415
with right and left ropes, small heights). Hoist for steel mill cranes,
34 3.54 114.39 228,782 119.97 239,931
container cranes, floating cranes and boom hoist for deck cranes,
1 3/8’’ 34.93 3.70 118.91 237,823 124.71 249,413
luffing and mobile cranes, grab cranes.
36 4.01 129.07 258,141 135.36 270,721
1 1/2’’ 38 4.44 142.82 285,634 149.78 299,553
OVERVIEW 40 4.90 158.47 316,946 166.20 332,392
1 5/8’’ 41 5.09 164.59 329,183 172.61 345,225
Number of 42 5.36 172.92 345,835 181.34 362,688
Number outer load
Diameter of outer Number bearing Average Average 44 6.05 195.09 390,183 204.60 409,198
range Construction strands of wires wires fill factor spin factor 1 3/4’’ 44.50 6.09 195.97 391,938 205.52 411,038
[mm] *N/mm2 46 6.57 211.68 423,356 221.99 443,987
8 – 11 8xK12 8 145 96 0,663 1 7/8’’ 48 7.17 231.03 462,054 242.29 484,571
0,850
12 – 15 8xK17 8 185 136 0,669 50 7.86 253.23 506,469 265.57 531,150
(1960 N/mm²)
16 – 28 8xK26 8 257 208 0,666 2’’ 50.80 7.98 256.66 513,325 269.17 538,340
0,810
30 – 42 8xK31 8 297 248 0,670 52 8.46 272.80 545,594 286.09 572,182
(2160 N/mm²)
44 – 60 8xK36 8 407 288 0,682 54 9.10 293.04 586,073 307.32 614,633
56 9.80 315.29 630,588 330.66 661,318
- Tolerance on diameter: (EN: +0%; +5%) 58 10.55 339.56 679,120 356.11 712,215
- Temperature range of use: -50°C to +100°C 60 11.23 362.39 724,776 380.05 760,096

- Temperature range of use for option PPI: -50°C to +80°C

- Option PPI – only available for diameter ≥ 13mm
- Available in ordinary lay and Lang‘s lay
- Available in right hand and left hand
- Available in galvanized and ungalvanized

84 TITAN 2014 / 2015 CATALOGUE

CRANE COMPONENTS
CRANE ROPES

OLIVEIRA NR MAXIPACT / NR MAXIPACT PPI

minimum breaking force
nominal diameter weight 1960 N/mm² 2160 N/mm²
inch mm lb/ft t [2000 lbs] lbs t [2000 lbs] lbs

1/2’’ 12.7 0.52 16.64 33,272 17.52 35,045

13 0.55 17.73 35,468 18.62 37,248
14 0.64 20.60 41,198 21.63 43,266
9/16’’ 14.3 0.65 21.07 42,142 22.13 44,257
15 0.73 23.56 47,116 24.80 49,603
5/8’’ 16 0.84 26.91 53,820 28.26 56,521
17 0.94 30.32 60,637 31.86 63,719
18 1.05 34.01 68,015 35.71 71,428
3/4’’ 19 1.18 38.09 76,180 40.00 80,002
20 1.30 42.06 84,120 44.17 88,341
21 1.44 46.33 92,659 48.65 97,309
High High
breaking force breaking force 22 1.57 50.81 101,610 53.35 106,709
PROPERTIES 7/8’’ 22.22 1.59 51.48 102,962 54.06 108,129
23 1.72 55.62 111,236 58.41 116,818
24 1.87 60.73 121,461 63.78 127,556
25 2.04 65.99 131,985 69.30 138,608
1’’ 25.4 2.07 66.93 133,856 70.29 140,573
26 2.20 71.29 142,584 74.87 149,739
27 2.38 76.84 153,670 80.69 161,382
28 2.55 82.51 165,019 86.65 173,299
APPLICATIONS 1 1/8’’ 28.6 2.67 86.35 172,710 90.69 181,376
29 2.73 88.80 177,599 92.67 185,335
Main and auxiliary hoists where Recommend in marine
30 2.95 95.13 190,262 99.90 199,809
superior rotation resistant and other severe working
1 1/4’’ 32 3.34 107.87 215,730 113.28 226,556
properties and superior environments.
34 3.75 121.32 242,645 127.35 254,710
minimum breaking forces (MBF)
1 3/8’’ 34.93 3.99 128.91 257,820 135.19 270,384
are required.
36 4.24 137.30 274,607 144.19 288,386
1 1/2’’ 38 4.71 152.01 304,026 159.43 318,869
OVERVIEW 40 5.20 168.05 336,094 176.36 352,724
1 5/8’’ 41.28 5.58 180.08 360,165 189.12 378,238
Number of
42 5.72 184.92 369,850 194.46 388,913
Number outer load
Diameter of outer Number bearing Average Average 44 6.32 204.42 408,839 214.68 429,354
range Construction strands of wires wires fill factor spin factor
1 3/4’’ 44.45 6.38 206.66 413,326 216.73 433,468
[mm] *N/mm2
46 6.97 224.33 448,651 235.58 471,165
0,85 1 7/8’’ 48 7.61 245.52 491,048 257.84 515,689
(1960 N/mm²) 50 8.09 262.10 524,194 275.52 551,042
12.7 – 54 37xK7 18 259 126 0,716
0,81 2’’ 50.8 8.34 269.79 539,572 282.93 565,867
(2160 N/mm²) 52 8.89 286.49 572,988 300.84 601,670
54 9.49 307.00 614,007 322.41 644,818
- Tolerance on diameter: (EN: +0%; +5%)
- Temperature range of use: -50°C to +100°C
- Temperature range of use for option PPI: -50°C to +80°C
- Option PPI – only available for diameter ≥ 13mm
- Available in ordinary lay and Lang‘s lay
- Available in right hand and left hand
- Available in galvanized and ungalvanized

TITAN 2014 / 2015 CATALOGUE 85

CRANE COMPONENTS
BLOCKS & SHEAVES

380 Series Easy Reeve® Hook Blocks

- Wide range of product available. - Heavy Duty Positive Locking (PL) Latch –
- Capacity: 4,5 to 72t - Larger Models Models: 25t and larger.
Available. - Sheave lubrication through center pin –
- Sheave Sizes: 254 to 508mm. separate lube channel to each bearing.
- Wire Line Sizes: 11 to 28mm. - Sheaves fully protected by side plates.
- All single point shank hooks are genuine - Dual action hook (swings and rotates).
Crosby®, forged alloy steel, Quenched - Repair parts available through world wide
and Tempered, and have the patented distribution network.
QUIC-CHECK® markings (Duplex hooks - All Easy Reeve® blocks, 16” and larger, are
are available on most sizes). furnished with McKissick® Roll-Forged™
- Design factor of 4 to 1 (unless otherwise sheaves with flame hardened grooves.
noted). - Manufactured by an ISO 9001 and API Q1
- All Easy Reeve® Blocks are furnished certified facility.
standard with Roller Bearings. - “Look for the Orange Hook . . . the mark
- Reeving Guides Standard – All Models. of genuine McKissick® quality”.
- Blocks thru 20t use 319N hooks with
S-4320 latches.

OPTIONS AVAILABLE
- Duplex Hooks (75 tons & larger) - Plate Steel Cheek Weights
- Swivel Tee and Shackle Assemblies - Third party testing with Certification
- Sheave Shrouds available upon request.
- Anti Rotation Hook - Locking Device
(75 tons & larger)

The patented McKissick Split-Nut® is the standard

retention system for standard crane blocks up to
100 tons.
Center “Dead End” to promote
better block travel under various
reeving configurations.

Sheave Guards that open to allow

block reeving without removing the Flat Bottom side plate for self
rope end fitting. standing during reeving process.

Forged Crosby® alloy steel hooks with patented

QUIC-CHECK® markings and Heavy Duty
positive locking hook latch.

86 TITAN 2014 / 2015 CATALOGUE

CRANE COMPONENTS
BLOCKS & SHEAVES

Wire Rope Sheaves Gunnebo Johnson sheaves are a highly trusted and popular product, both in its own right as
well as the original equipment most preferred by major O.E.M. accounts. Sheaves by Gunnebo
Johnson fall into two major categories:
- First is our wide range of conventional cast steel and ductile iron sheaves which range in
size from 3 to 14 inches in O.D.
- Second is the revolutionary ForgeFab® – a superior strength line of wire rope sheaves
which can be supplied without long delays. The ForgeFab® sheaves will add value through
increased product life, for the sheave as well as the wire rope, and gives the user the
advantage of flexibility in field.

Standard Features: - Electroplate inorganic zinc compound

- 80 - 2740 mm sheave diameters and other corrosion resistant coatings
available.
- 6 - 80 mm wire rope sizes
- Hub-located grease fittings
- 4:1 design factor
- Modifications as required to API and
- Cast iron, ductile iron, cast steel,
other applicable industry standards.
ForgeFab® steel types.
- Special shaft, furnished for any sheave
listed.
Optional Features:
- AISE No. 6 specifications.
- Custom designs to customer shaft, bearing
mounting, hub, sheave O.D. or wire rope - Cold weather properties.
size requirement.

What Makes ForgeFab® Superior?

Each ForgeFab® sheave begins as driven, The steel disc is heated to forging temperature A precisely machined hub is arc welded The result: A precision built ForgeFab® sheave,
precision disc cut from proprietary chemistry and its edge rotated against a system of staged to the forged disc. A variety of welding resistant to wear giving a long product life span as
alloy steel plate. rollers to forge the sheave rim and wire rope techniques is used, including: fillet, well as decreased wear on the wire rope.
groove. submerged arc, partial penetration and full
penetration, depending on the application.
Quotation of Sheaves
To be able to quote Gunnebo Johnson Sheaves we need as much as possible of the following information provided:
- Application (standard feature on16”and up)? - Bearing type (if required); e.g. Bronze
- Quantity - Rim width (C) bushed or other type of bearing
- Sheave outside diameter (A) - Hub width (G) - Is there any weight restrictions?
- Tread diameter or Pitch diameter - Hub Outside Diameter (T) - Is grease fitting in hub is needed?
- Wire rope diameter - Bore size if plain or finished bore (E) or - Is there any paint or finish requirements?
- Is Flamed Hardened Groove required shaft size with bronze bush or bearing (E) - Line Load, Line Speed and Degree of Wrap

TITAN 2014 / 2015 CATALOGUE 87

CRANE COMPONENTS
BLOCKS & SHEAVES

Quick Reeve - Mobile Crane Block

Standard Features:
- Quick release, zinc plated, rope retention - Available tonnage capacities from 5 - 300
pin meets OSHA requirements for rope tonnes. Larger capacities available upon
retention. Cannot be completely removed request.
from block to avoid pin loss. - Quick Reeve™ upright design rests on its
- Johnson J-Latch™ heavy duty, steel, own hook for a stable base while reeving.
lockable, spring loaded latch meets OSHA - No bulky, drop down, trap door to handle
personnel lifting requirements. or damage.
- The Johnson J-Latch™ provides a fast - Wire rope end fitting will pass through
hook deformation inspection point. block without removal from wire rope.

Fixed Bail Construction and Marine Rigging Blocks

Beginning with 100 standard models, you are assured of selections that fit your every
need. The lowest weight to capacity ratios, the quickest rigging and the easiest
maintenance are a few additional benefits that prove once again that Johnson Blocks
are consistent in quality and value.

Standard Features: Optional Features:

- 10 to 135 tonnes capacity - Bronze bushings
- 4:1 design factor - Diamond pattern side plates
- 1 to 6 sheaves - Fully galvanized for corrosion resistance
- Full coverage side plates and centre - High capacity, custom engineered
plates blocks available upon request
- Top dead-end shackle
- Tapered roller bearings
- Oval pattern side plates

Shorty ”J” Crane Blocks

Shorty ”J” represents the broadest line of standard crane blocks in the industry. In all, this
company manufactures more than 1500 standard models of crane blocks not including options.

Standard Features: Optional Features:

- 5 - 450 tonnes capacity - Forged steel hooks, 35 - 300 tonnes
- 4:1 design factor - Cast alloy steel duplex hooks with bar
- 1 - 8 sheaves latch 25 - 1750 tonnes
- 250 - 760 mm sheave diameters - Forged steel duplex hooks
- Reeving guides for all models - Anti-rotation locking devices, all models
- Bronze bushed and roller bearing - Swivel safety anchor shackles, all models
sheaves - Sheave shrouds, all models
- Direct-channel sheave bearing lubrication - All models have detachable cast iron and
through centre pin steel cheek weights.
- Flame hardened grooves on sheave sizes - Proof test and certification, radiographic,
400 - 760 mm diameters magnetic particle, and other
- Dual action (swing/swivel) roller thrust nondestructive testing to specification
bearing hooks by customer
- Forged steel hooks, 3 - 30 tonnes
- Total disassembly capacity

88 TITAN 2014 / 2015 CATALOGUE

CRANE COMPONENTS
CRANES
The Caldwell Group

Model A360 Series - Base Mounted

Product Features:
JIB ARM LENGTH (SPAN) - Spans and height combinations from 8’-20’.
- 360° rotation (when not obstructed).
3 3 - Design allows for easy rotation, even under full load.
- Units are fully self-supporting (must be anchored to
specified foundation).
- Conforms to applicable standards.
2
HEIGHT
UNDER
JIB ARM
1
4

“Friction Free” Full Circle Jib Crane

Designed for easy installation, minimal maintenance
requirements, and years of trouble free service.

Heavy duty design with many quality features:

1 Two roller design with articulated roller 3 End stops provide a positive hoist/
housing provides easy, precise rotation trolley stop, and allows for maximum in
while reducing concentrated roller trolley travel.
pressure on the pipe for most “normal”
industrial applications. 4 Optional hoist/trolley package.

2 Jib head is designed for exact bearing All cranes have been designed to easily
alignment for trouble-free installations and accept a kit for powered rotation either
“friction-free” rotation. Adjustable rollers with the initial order or at a later date.
insure proper boom leveling.

TITAN 2014 / 2015 CATALOGUE 89

CRANE COMPONENTS
CRANES
The Caldwell Group

Model A360-1/4 - 1/4 Ton Capacity

Specifications
Jib Arm Length - Span (feet)
1/4 Ton Capacity* 8 10 12 14 16 18 20

Model Number A360-1/4-8/8 A360-1/4-8/10 A360-1/4-8/12 A360-1/4-8/14 A360-1/4-8/16 A360-1/4-8/18 A360-1/4-8/20

Pipe O.D. (in.) 8-5/8 8-5/8 8-5/8 12-3/4 12-3/4 12-3/4 12-3/4
8 Overall Height 8’6-1/4” 8’6-1/4” 8’6-1/4” 8’8-1/4” 8’8-1/4” 8’10-3/8” 8’10-3/8”
Flange Width (in.) 4 4 4 5-1/4 5-1/4 5-3/4 5-3/4
Weight (lbs.) 855 885 905 1285 1327 1495 1555

Model Number A360-1/4-10/8 A360-1/4-10/10 A360-1/4-10/12 A360-1/4-10/14 A360-1/4-10/16 A360-1/4-10/18 A360-1/4-10/20

Pipe O.D. (in.) 8-5/8 8-5/8 8-5/8 12-3/4 12-3/4 12-3/4 12-3/4
10 Overall Height 10’6-1/4” 10’6-1/4” 10’6-1/4” 10’8-1/4” 10’8-1/4” 10’10-3/8” 10’10-3/8”
Flange Width (in.) 4 4 4 5-1/4 5-1/4 5-3/4 5-3/4
Weight (lbs.) 910 940 960 1350 1390 1560 1620

Model Number A360-1/4-12/8 A360-1/4-12/10 A360-1/4-12/12 A360-1/4-12/14 A360-1/4-12/16 A360-1/4-12/18 A360-1/4-12/20

Pipe O.D. (in.) 8-5/8 8-5/8 12-3/4 12-3/4 12-3/4 12-3/4 12-3/4
Height Under Jib Arm (ft.)

12 Overall Height 12’6-1/4” 12’6-1/4” 12’6-1/4” 12’8-1/4” 12’8-1/4” 12’10-3/8” 12’10-3/8”

Flange Width (in.) 4 4 4 5-1/4 5-1/4 5-3/4 5-3/4
Weight (lbs.) 965 995 1285 1415 1455 1625 1685

Model Number A360-1/4-14/8 A360-1/4-14/10 A360-1/4-14/12 A360-1/4-14/14 A360-1/4-14/16 A360-1/4-14/18 A360-1/4-14/20

Pipe O.D. (in.) 8-5/8 8-5/8 12-3/4 12-3/4 12-3/4 12-3/4 14
14 Overall Height 14’6-1/4” 14’6-1/4” 14’6-1/4” 14’8-1/4” 14’8-1/4” 14’10-3/8” 14’10-3/8”
Flange Width (in.) 4 4 4 5-1/4 5-1/4 5-3/4 5-3/4
Weight (lbs.) 1020 1050 1350 1480 1520 1690 2095

Model Number A360-1/4-16/8 A360-1/4-16/10 A360-1/4-16/12 A360-1/4-16/14 A360-1/4-16/16 A360-1/4-16/18 A360-1/4-16/20

Pipe O.D. (in.) 8-5/8 8-5/8 12-3/4 12-3/4 12-3/4 12-3/4 14
16 Overall Height 16’6-1/4” 16’6-1/4” 16’6-1/4” 16’8-1/4” 16’8-1/4” 16’10-3/8” 16’10-3/8”
Flange Width (in.) 4 4 4 5-1/4 5-1/4 5-3/4 5-3/4
Weight (lbs.) 1080 1110 1420 1550 1590 1760 2185

Model Number A360-1/4-18/8 A360-1/4-18/10 A360-1/4-18/12 A360-1/4-18/14 A360-1/4-18/16 A360-1/4-18/18 A360-1/4-18/20

Pipe O.D. (in.) 8-5/8 8-5/8 12-3/4 12-3/4 14 14 14
18 Overall Height 18’6-1/4” 18’6-1/4” 18’6-1/4” 18’8-1/4” 18’8-1/4” 18’10-3/8” 18’10-3/8”
Flange Width (in.) 4 4 4 5-1/4 5-1/4 5-3/4 5-3/4
Weight (lbs.) 1135 1165 1485 1615 2050 2220 2280

Model Number A360-1/4-20/8 A360-1/4-20/10 A360-1/4-20/12 A360-1/4-20/14 A360-1/4-20/16 A360-1/4-20/18 A360-1/4-20/20

Pipe O.D. (in.) 8-5/8 8-5/8 12-3/4 12-3/4 14 14 16
20 Overall Height 20’6-1/4” 20’6-1/4” 20’6-1/4” 20’8-1/4” 20’8-1/4” 20’10-3/8” 20’10-3/8”
Flange Width (in.) 4 4 4 5-1/4 5-1/4 5-3/4 5-3/4
Weight (lbs.) 1190 1220 1550 2100 2140 2310 3070

Foundation Type A Type C

Type 4’ X 4’ 5’ X 5’
3’ Deep 3’ Deep

* Total weight of hoist and trolley not to exceed 15% of rated capacity.
Clearance requirements - 2” Horizontal
3” Vertical

90 TITAN 2014 / 2015 CATALOGUE

CRANE COMPONENTS
CRANES
The Caldwell Group

Model K90 - Adjustable Height & Span Gantry

Product Features:
- Adjustable span standard on 10’-16’ spans through 5 ton.
- Bolted connections on spans of 20’-24’ and all 8 ton units.
- Heavy duty supported leg design.
- Balanced designed allows for easy maneuvering, even under load.
- Conforms to AISC, OSHA and CMAA specifications.
- Simple bolted construction.
- Easy set up and maintenance.
- 4-steel swivel casters standard.
- Height & span adjustability.
- Height adjustable down from maximum in 12” increments.

OVERALL LENGTH (B)

NOMINAL SPAN

BEAM
HEIGHT
MAX. HEIGHT

HOIST/TROLLEY HEADROOM FLANGE

SEE PAGES H.36 - H.37 WIDTH
MIN. HEIGHT

INSIDE SPAN (A)

CASTER
DIAMETER

SUPPORT WIDTH (C)

TITAN 2014 / 2015 CATALOGUE 91

CRANE COMPONENTS
CRANES
The Caldwell Group

Model K90-1 - 1 Ton Capacity

Specifications Nominal Span (ft.)
Clamp Connection Bolt Connection
1 Ton Capacity* 10 12 14 16 20 24

Model Number K90-1-7/10 K90-1-7/12 K90-1-7/14 K90-1-7/16 K90-1-7/20 K90-1-7/24

Inside Span (A) 10’-4” 12’-4” 14’-4” 16’-4” 18’-6” 22’-6”
7 Overall Length (B) 11’-6” 13’-6” 15’-6” 17’-6” 21’-6” 25’-6”
Weight (lbs.) 704 809 846 1015 1294 1664
Minimum Height 4’-11” 5’-5”
Support Width (C) 4’-0”

Model Number K90-1-9/10 K90-1-9/12 K90-1-9/14 K90-1-9/16 K90-1-9/20 K90-1-9/24

Inside Span (A) 10’-4” 12’-4” 14’-4” 16’-4” 18’-6” 22’-6”
9 Overall Length (B) 11’-6” 13’-6” 15’-6” 17’-6” 21’-6” 25’-6”
Weight (lbs.) 802 907 944 1113 1408 1778
Minimum Height 5’-11” 6’-5”
Maximum Height Under Beam (ft.)

Support Width (C) 5’-0”

Model Number K90-1-10/10 K90-1-10/12 K90-1-10/14 K90-1-10/16 K90-1-10/20 K90-1-10/24

Inside Span (A) 10’-4” 12’-4” 14’-4” 16’-4” 18’-6” 22’-6”
10 Overall Length (B) 11’-6” 13’-6” 15’-6” 17’-6” 21’-6” 25’-6”
Weight (lbs.) 847 952 989 1158 1482 1852
Minimum Height 6’-5” 6’-11”
Support Width (C) 5’-6”

Model Number K90-1-12/10 K90-1-12/12 K90-1-12/14 K90-1-12/16 K90-1-12/20 K90-1-12/24

Inside Span (A) 10’-4” 12’-4” 14’-4” 16’-4” 18’-6” 22’-6”
12 Overall Length (B) 11’-6” 13’-6” 15’-6” 17’-6” 21’-6” 25’-6”
Weight (lbs.) 944 1049 1086 1225 1609 1979
Minimum Height 7’-5” 7’-11”
Support Width (C) 6’-6”

Model Number K90-1-14/10 K90-1-14/12 K90-1-14/14 K90-1-14/16 K90-1-14/20 K90-1-14/24

Inside Span (A) 10’-4” 12’-4” 14’-4” 16’-4” 18’-6” 22’-6”
14 Overall Length (B) 11’-6” 13’6” 15’-6” 17’-6” 21’-6” 25’-6”
Weight (lbs.) 1028 1133 1170 1339 1733 2103
Minimum Height 8’-5” 8’-11”
Support Width (C) 7’-6”

Model Number K90-1-16/10 K90-1-16/12 K90-1-16/14 K90-1-16/16 K90-1-16/20 K90-1-16/24

Inside Span (A) 10’-4” 12’-4” 14’-4” 16’-4” 18’-6” 22’-6”
16 Overall Length (B) 11’-6” 13’-6” 15’-6” 17’-6” 21’-6” 25’-6”
Weight (lbs.) 1132 1237 1274 1443 1860 2230
Minimum Height 10’-5” 10’-11”
Support Width (C) 7’-6”

Beam Height (in.) 6 8 10 12

Flange Width (in.) 3.33 4 4.66 5.25
Caster Diameter (in.) 6 8

* Total weight of hoist and trolley not to exceed 20% of rated capacity.

92 TITAN 2014 / 2015 CATALOGUE

CRANE COMPONENTS
CRANES

boom
Series 571 and 572 Fre Rol Davit Cranes
Model 571M1 with
Hand or Power Winch
Standard FixedOperation
Boom Up to 2200 lb capacity
wire rope
- Hand Winch Operated Models include spur gear or worm gear
hand winch with brake for load control. Model 571M2 can be drill
boom driven, 400 rpm max.
- Power Winch Operated Models include 115 volt 1 phase AC electric
Model 571M1 with load hook winch with pendant control and brake. Other power options
Standard Fixed Boom available, please contact factory.
wire rope
drum - Fixed Boom – Boom Position C
boom brace
- Adjustable Boom Option – adjusts between Boom Position A and
D – with hand operated ratchet style screw-jack, used to adjust
height and reach.
mast Optional screw-jack sold separately.
load hook
- Mast and Boom Rotate on tapered roller bearings for smooth 360°
load movement. Mast locks in one of four positions with hand
drum winch
boom brace tightened lock bolt. Handle on the mast makes rotation easy.
base - Gusset Style Base for permanent installation and stability under
load.
- Epoxy Finish available for improved protection against corrosion.
mast
- Wire Rope Assemblies sold separately.
- Two-year Limited Warranty
winch

base

optional
ratchet style
screw-jack

Model 571M2 with

Adjustable Boom Option
optional (screw-jack sold separately)
ratchet style
screw-jack

Series 571 and 572 – Crane Configurations, Bases, and Options – Section 4
model description approx. ship wt.
Model 571M2 with
571M1 up toAdjustable
1500 lb – withBoom Option
M4312PB-K spur gear hand winch 425 lb
571M2 up to(screw-jack
1500 lb – with sold separately)
4WM2V-K worm gear hand winch 450 lb
571E2 up to 1500 lb – with 4WP2-K electric winch – 115 VAC, 1 phase, 6 ft pendant control 475 lb
571E4 up to 1500 lb – with 4777-K electric winch – 115 VAC, 1 phase, 6 ft pendant control 489 lb
572M1 up to 2200 lb – with M452B-K spur gear hand winch 720 lb
572E3 up to 2000 lb – with 4771-K electric winch – 115 VAC, 1 phase, 6 ft pendant control 750 lb
572E5 up to 2200 lb – with 4WS3M6-K electric winch – 115 VAC, 1 phase, 6 ft pendant control 1050 lb
(other configurations available, please contact factory)
SJ1 ratchet style screw-jack for Series 571 (replaces standard boom brace) 37 lb
SJ2 ratchet style screw-jack for Series 572 (replaces standard boom brace) 97 lb

Please contact factory or nearest Thern Distributor for firm fixed price and delivery.

TITAN 2014 / 2015 CATALOGUE 93

CRANE COMPONENTS
CRANES

Positions A, B and D require D Series 571 and 572 – Height and Reach
separate order of ratchet style
screw-jack. C Series 571 Series 572

F 67.19 in 77.41 in
B
H G 32.88 in 38.62 in
E3, E4 and E5 H 131.19 in 155.75 in
location
Q 16.00 in 20.00 in
R 18.00 in 23.00 in
S (hole dia.) .56 in .81 in
A Dimensions are for reference only and subject to change without notice.
M1, M2
and E2 Adjustable Boom Option
F location Ratchet Style Screw-Jack Important
Load rating will vary with wire rope length and boom position.

hook
height

G Q
S Important
It is the owner’s or operator’s responsibility to
determine the suitability of the equipment to its
hook reach R intended use. Study all applicable codes, manuals,
and regulations. Be sure to read the Owner’s Manual
supplied with the equipment before operating it.
132
Series 571 D
120
C
00
15

108
0 Series 572 168
150 B
96
0 156
135 D
84
C 144
72
00

1200 A 132
22

60
00 B
22 120
48
0
2 00 108
36
Positions A, B and D require
96
separate order of ratchet style 24
screw-jack.
84
12
1700
A
72
12 24 36 48 60 72 84 in
60

Series 571 and 572 – Height and Reach 48

boom hook hook Positions A, B and D require
series position reach height separate order of ratchet style 36
screw-jack.
571 A1 87.88 in 56.00 in 24

B1 81.25 in 90.00 in
12
C (fixed) 74.56 in 102.00 in
D1 62.25 in 118.00 in
12 24 36 48 60 72 84 96 108 120 in
572 A1 106.75 in 64.00 in
B1 95.50 in 112.00 in
C (fixed) 84.25 in 130.00 in Important
Base installation is purchaser’s responsibility. Thern recommends
D1 75.00 in 140.00 in
consulting a civil engineer or other qualified professional.
Dimensions are for reference only and subject to change without notice.
1
Boom position requires purchasing the screw-jack option.

94 TITAN 2014 / 2015 CATALOGUE

CRANE COMPONENTS
OUTRIGGER PADS

Construction CC Blocking’s Outrigger Pads and blocks Handles

are manufactured from Douglas Fir Canply All pads, blocks and ramps are made with
3/4” exterior sheathing and are layered built-in poly rope handles.
using a liquid glue that expands into
the wood creating an incredibly strong
waterproof bond. They are then hydraulically Pads 30” and larger have two handles,
pressed (up to 30 Ton) and screwed from 180 degrees apart. Handles are normally
both sides creating strong and solid blocks on the narrow end of pads, unless otherwise
and pads. Once cured, the edges are requested
sanded and rounded for a practical and
professional appearance. Options
- Custom Sizes
- Custom Shapes
- Extra handles
- Handles made from braided Nylon Rope
- Sealed edges, painted with marine grade
enamel in Safety Orange or
- Clear-Coat
Standard Sizes
All sizes for Outrigger Pads are nominal, Round Pads Square Pads Rectangle Pads Blocking
exact dimensions approximately 1/8” less after
2 ¼ x 12” 2 ¼ x 12” 2 ¼ x 12” x 16” 3 ¾ x 6” x 12”
cut and press
3 x 12” 3 x 12” 3 x 12” x 16” 5 ¼ x 6” x 12”
2 ¼ x 16” 6 x 12” 3 x 12” x 18” 3 ¾ x 6” x 18”
As a general guideline, outrigger pad size 3 x 16” 2 ¼ x 16” 3 ¾ x 12” x 18” 5 ¼ x 6” x 18”
should be at least three times the size of 3 ¾ x 16” 3 x 16” 3 x 18” x 24” 5 ¼ x 6” x 24”
the outrigger foot itself for proper weight 3 x 18” 3 ¾ x 16” 3 ¾ x 18” x 24” 5 ¼ x 8” x 18”
distribution. 3 ¾ x 18” 3 x 18” 4 ½ x 18” x 24” 5 ¼ x 8” x 24
3 x 24” 3 ¾ x 18” 3 ¾ x 24” x 30” 6 x 8” x 30”
3 ¾ x 24” 2 ¼ x 24” 5 ¼ x 24” x 30” 12 x 12” x 24”
To calculate, multiply length x width = square
4 ½ x 24” 3 x 24”
area and radius x radius x 3.14 = round area. 3 ¾ x 30” 3 ¾ x 24”
3 ¾ x 32” 4 ½ x 24”
3 ¾ x 36” 5 ¼ x 24”
3 ¾ x 42” 6 x 24”
3 ¾ x 48” 3 ¾ x 30”
3 ¾ x 32”
3 ¾ x 36”
3 ¾ x 42”
3 ¾ x 48”

Example:
Foot size 8” x 10”= 80 sq. in. Pad size Always inspect outrigger foot and pads The outrigger foot should be placed
should then be 80 x 3 = 240 sq. in. or more. prior to use for any debris or possible in the center of the outrigger pad and
Then use the following thickness chart as a signs of failure. all pads underneath it.
guideline only. Spread the load out as much
as possible for greater stability. Set up on level and stable ground Always follow original equipment
conditions only. Do not span voids or manufacture’s guidelines.
2-1/4” Thick Pads up to 10 Ton use additional materials to level pad.
3” Thick Pads up to 30 Ton Always stack a smaller pad on top of “As we have no control over how our
3-3/4” Thick Pads up to 60 Ton a larger under pad where required to products are used or the conditions
gain additional height or spread out they are used in, no guarantee or
4-1/2” and over up to 80 Ton
the load. warranty is made or implied.”

TITAN 2014 / 2015 CATALOGUE 95

INSPECTIONS & RECERTIFICATION

When it comes to inspections, let us handle

the heavy lifting.
Safety requirements for lifting and rigging are critically important for your operation. In fact, it is mandatory that
slings and rigging are inspected frequently and in some cases, recertified annually in order to remain compliant
with OHS regulations.

Titan’s Inspection Program can help you stay compliant without losing critical work time.

Inspections Mobile Inspection &

You’ll receive flexibility with Titan’s Inspection program. Recertification Units
Choose from these options:
The mobile inspection unit can perform all standard inspections
- On-site or in-the-shop inspections
(when recertification is not required). The mobile test unit can
- RFID tagging perform all standard inspections, minor repair and can recertify
- Pre-inspection audits all rigging (if no major repairs are required) with a proof testing
- Online record keeping capacity of up to 150,000 lbs.

Repairs & Recertification Qualified Inspectors & Technicians

If your rigging fails, you don’t always have to purchase new product. Titan’s Inspector Competency program is an apprentice-type
We recommend repairing the following: program and includes mandatory classroom work direct from
- High performance round slings manufacturers, training from Cranemasters and a pre-set
- Chain slings minimum of hands-on, on-the-job experience.
- Plate clamps and beam clams
- Chain hoists and pullers

96 TITAN 2014 / 2015 CATALOGUE

INSPECTIONS & RECERTIFICATION

Titan’s Inspection Program is flexible. Choose the package

that best meets your needs and we’ll do the rest!
Package 1 Package 2 Package 3
Onsite Inspeciton Unit Onsite Test Unit In-shop Inspection, Repairs & Proof-testing

Suitable for sites where downtime is critical or with Suitable for site where downtime is critical or with large Suitable for smaller amounts of rigging or for large
large rigging inventories rigging inventories rigging inventories when turnaround is not critical

Suitable for sites with majority synthetic and chain Rigging that can be inspected and recertified (unless All slings, clamps and hoists are proof-tested (other
slings, shackles, spreader bars which will receive a repair is required) includes: synthetic and chain slings, rigging upon request)
visual inspection only, no proof testing. shackles, wire rope, pullers, hoists, Tirfors, plate/beam
Rigging that passes inspection and/or proof-test is re-
clamps. All slings, clamps and hoists are proof-tested
Rigging that passes inspection will be re-tagged with certified and certificate is forwarded to customer.
(other rigging upon request)
documentation provided on-site
Failed rigging can be returned to customer with danger
Rigging that passes inspection and proof-test is re-
All wire rope, pullers, hoists, Tirfors, plate/beam tag and is to be put out of service or customer can
certified and re-tagged onsite with certificate provided.
clamps are sent to shop for inspection & proof-testing choose to have Titan destroy product at customer’s
(repair if required). Minor repairs can be performed on-site but major expense.
repairs are sent to shop (at customer’s expense or when
All repairs sent to shop (at customer’s expense or
possible brought back in the Mobile unit).
brought back in the truck if possible).
Failed rigging is tagged with danger tag and is to be put
Failed rigging is tagged with danger tag and is to be
out of service.
put out of service.
Two inspectors (at least one at Level 3 competency).
Two inspectors on-site (at least one at Level 3
competency).

Additional Options
Pre-Inspeciton Audit Asset Tracking

Frequency Semi-Annually Titan database (RFID)

Monthly Annually Titan database (No RFID)
Quarterly No asset tracking

TITAN 2014 CATALOGUE 97

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

CRANE COMPONENTS (pg. 86-95) FITTINGS (pg. 29-50)

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

OUTRIGGER12S-225 PAD 2.25X12X12 SQUARE W/ROPE CC BLOCKING 00104 SLEEVE 564 DUPLEX ALUMINUM BEN-MOR INC
OUTRIGGER18SQR PAD 3.75X18X18 SQUARE W/ROPE CC BLOCKING LSG121 SNAKESKIN 12-1 TYPE LSG CARREAU OILFIELD
OUTRIGGER24SQR PAD 3.75X24X24 SQUARE W/ROPE CC BLOCKING 1014720C HAMMERLOK 932 CM
OUTRIGGER30SQR PAD 3.75X30X30 SQUARE W/ROPE CC BLOCKING 1027329C HOOK 12 CLEVIS GRAB G70 CM CM
OUTRIGGER36RND PAD 3.75X36 ROUND W/ROPE CC BLOCKING 1027775C HOOK 12 SLING CLEVLOK CM
OUTRIGGER36SQR PAD 3.75X36X36 SQUARE W/ROPE CC BLOCKING 1027249C HOOK 14 GRAB CLEVIS G70 CM CM
0710449 BLOCK .5 TON GIN 12” SHEAVE CROSBY 1027285C HOOK 38 GRAB CLEVIS G70 CM CM
0710421 BLOCK 0.5 TON GIN 10” SHEAVE CROSBY 1027677C HOOK 38 GRAB CRADLE CLEVLOK CM
0170200 BLOCK 1TON HAY FORK 4.5”SHEAVE CROSBY 1027766C HOOK 38 SLING CLEVLOK CM
0121022 BLOCK 20 TON SHACKLE 8” SHEAVE CROSBY 1027560C HOOK 38 SLIP CLEVIS G63 CM CM
0120023 BLOCK 20TON SNATCH 8” SHEAVE CROSBY 1027267C HOOK 516 GRAB CLEVIS G70 CM CM
0103523 BLOCK 20TON TAILBOARD 8”SHEAVE CROSBY 1027695C HOOK 58 GRAB CRADLE CLEVLOK CM
0108038 BLOCK 2TON SNATCH 3” SHEAVE CROSBY 1027301C HOOK 716 GRAB CLEVIS G63 CM CM
0109037 BLOCK 2TON SW. EYE 3” SHEAVE CROSBY 1027659C HOOK 932 GRAB CRADLE CLEVLOK CM
0102016 BLOCK 2TON TAILBOARD 3” SHEAVE CROSBY D92800Z HOOK J TOWING 78X15 EYE CM
0108065 BLOCK 4 TON SNATCH 4.5” SHEAVE CROSBY 1090252C LATCH 12 SLING HOOK CM (OLD) CM
0109064 BLOCK 4TON SHACKLE 4.5” SHEAVE CROSBY 4X455328 LATCH 12 SLING HOOK CM(NEW) CM
0102025 BLOCK 4TON TAILBOARD 4.5” SHV CROSBY 1090251C LATCH 38 SLING HOOK CM CM
0109126 BLOCK 8TON SHACKLE 6” SHEAVE CROSBY 4X455325 LATCH 38 SLING HOOK CM(NEW) CM
0109224 BLOCK 8TON SHACKLE 8” SHEAVE CROSBY 1090253C LATCH 58 SLING HOOK CM
0108127 BLOCK 8TON SNATCH 6” SHEAVE CROSBY 1090250C LATCH 932 SLING HOOK CM CM
0108225 BLOCK 8TON SNATCH 8” SHEAVE CROSBY M706A SHACKLE 1 WEB ALLOY FOR 6”WEB CM
0102098 BLOCK 8TON TAILBOARD 6” SHEAVE CROSBY 2003822 BALL 15#lb SPLIT OVERHAUL CROSBY
0102169 BLOCK 8TON TAILBOARD 8” SHEAVE CROSBY 2003830 BALL 20#lb SPLIT OVERHAUL CROSBY
DB20S SHEAVE 316 DEUER DEUER MANUFACTURING 2003831 BALL 50#lb SPLIT OVERHAUL CROSBY
133103 SHEAVE 3 JET .5TON 516 WL JET 9900271 BOLT 112X312 EYE SHOULDER CROSBY
133104 SHEAVE 4 JET 1TON 38 WL JET 9900262 BOLT 114X3 EYE SHOULDER CROSBY
133105 SHEAVE 5 JET 1.5TON 12 WL JET 9900217 BOLT 12X112 EYE SHOULDER CROSBY
133106 SHEAVE 6 JET 2TON 58 WL JET 1045869 BOLT 12X20.5 EYE SHOULDER Metr CROSBY
FP6671 DAVIT LADDER-TOP MAST NORTH SAFETY 1045130 BOLT 12X314 EYE SHOULDER NUT CROSBY
1045158 BOLT 12X6 EYE SHOULDER NUT CROSBY
CRANE ROPES (pg. 77-85) 9900182 BOLT 14X1 EYE SHOULDER CROSBY
ITEM DESCRIPTION VENDOR 1045913 BOLT 16X27 EYE SHOULDER Metric CROSBY
9900253 BOLT 1X212 EYE SHOULDER CROSBY
16MMSTARLIFT ROPE 16MM STARLIFT XTRA WIRECO
1045292 BOLT 1X6 EYE SHOULDER NUT CROSBY
19MMTURBOPLAST ROPE 19MM TURBOPLAST 1960 B SZ WIRECO
1045318 BOLT 1X9 EYE SHOULDER NUT CROSBY
22MMMAXIPACT ROPE 22MM MAXIPACT NR 2160 B WIRECO
1043659 BOLT 34X12 EYE REGULAR NUT CROSBY
012VV822D ROPE 34 XLT-4 WIRE WIRECO WIRECO
9900235 BOLT 34X2 EYE SHOULDER CROSBY
010VV822D ROPE 58 XLT-4 WIRE WIRECO WIRECO
1045210 BOLT 34X412 EYE SHOULDER NUT CROSBY
DRILL LINE & TUBING 1043597 BOLT 34X6 EYE REGULAR NUT CROSBY
ITEM DESCRIPTION VENDOR 1045238 BOLT 34X6 EYE SHOULDER NUT CROSBY
9900208 BOLT 38X114 EYE SHOULDER CROSBY
100R501D ROPE 1 WIRE 6X26 IWRC XIP TBG WIRECO 1045096 BOLT 38X212 EYE SHOULDER NUT CROSBY
102R501I ROPE 118 WIRE 6X19 IWRC DL XIP WIRECO 1045112 BOLT 38X412 EYE SHOULDER NUT CROSBY
014K501D ROPE 78 WIRE 6X26 IWRC XIP TBG WIRECO 9900191 BOLT 516X118 EYE SHOULDER CROSBY
9900226 BOLT 58X134 EYE SHOULDER CROSBY
FITTINGS (pg. 29-50) 1045176 BOLT 58X4 EYE SHOULDER NUT CROSBY
ITEM DESCRIPTION VENDOR 1045194 BOLT 58X6 EYE SHOULDER NUT CROSBY
9900244 BOLT 78X214 EYE SHOULDER CROSBY
1004A SLEEVE 1 OVAL ALUMINUM ALUMALOC MFG. 1045256 BOLT 78X5 EYE SHOULDER NUT CROSBY
1024A SLEEVE 118 OVAL ALUMINUM ALUMALOC MFG. 1040359 BUTTON 12 SWAGE CROSBY
0084A SLEEVE 12 OVAL ALUMINUM ALUMALOC MFG. 1040251 BUTTON 14 SWAGE CROSBY
0064A SLEEVE 38 OVAL ALUMINUM ALUMALOC MFG. 1040215 BUTTON 316 SWAGE CROSBY
0054A SLEEVE 516 OVAL ALUMINUM ALUMALOC MFG. 1040411 BUTTON 34 SWAGE CROSBY
0074A SLEEVE 716 OVAL ALUMINUM ALUMALOC MFG. 1040313 BUTTON 38 SWAGE CROSBY
CSH70L012 HOOK 12 CLEVIS SLIP GOLD BEN-MOR INC 1040297 BUTTON 516 SWAGE CROSBY
0024S3 SLEEVE 18 OVAL STAINLESSS BEN-MOR INC 1040395 BUTTON 58 SWAGE CROSBY

98 TITAN 2014 / 2015 CATALOGUE

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

FITTINGS (pg. 29-50) FITTINGS (pg. 29-50)

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

1040331 BUTTON 716 SWAGE CROSBY 1004331 HOOK 13MM SWIVEL SHURLOC CROSBY
1040439 BUTTON 78 SWAGE CROSBY 1027249 HOOK 14 CLEVIS GRAB ALLOY CROSBY
1040377 BUTTON 916 SWAGE CROSBY 1027524 HOOK 14 CLEVIS SLIP ALLOY CROSBY
1010239 CLAMP 1 CABLE FORGED CROSBY 1048877 HOOK 15 TON ALLOY SWIVEL 322AN CROSBY
1010319 CLAMP 112 CABLE FORGED CROSBY 1022941 HOOK 16MM EYE SHURLOC CROSBY
1010275 CLAMP 114 CABLE FORGED CROSBY 1004340 HOOK 16MM SWIVEL SHURLOC G100 CROSBY
1010257 CLAMP 118 CABLE FORGED CROSBY 1021909 HOOK 2 CHOKER WEB CONNECTOR CROSBY
1010532 CLAMP 12 CABLE FIST GRIP CROSBY 1022397 HOOK 2 TON EYE ALLOY CROSBY
1010131 CLAMP 12 CABLE FORGED CROSBY 1022233 HOOK 2 TON EYE CARBON CROSBY
1010471 CLAMP 14 CABLE FIST GRIP CROSBY 1028033 HOOK 2 TON SORTING HANDLED CROSBY
1010051 CLAMP 14 CABLE FORGED CROSBY 1048822 HOOK 2 TON SWIVEL ALLOY NEW CROSBY
1010015 CLAMP 18 CABLE FORGED CROSBY 1048627 HOOK 2 TON SWIVEL CARBON NEW CROSBY
1010373 CLAMP 2 CABLE FORGED CROSBY 1022244 HOOK 3 TON EYE CARBON CROSBY
1010435 CLAMP 234 CABLE FORGED CROSBY 1022406 HOOK 3 TON EYE HOIST ALLOY CROSBY
1010033 CLAMP 316 CABLE FORGED CROSBY 1048831 HOOK 3 TON SWIVEL ALLOY S322AN CROSBY
1010578 CLAMP 34 CABLE FIST GRIP CROSBY 1048636 HOOK 3 TON SWIVEL CARBON NEW CROSBY
1010195 CLAMP 34 CABLE FORGED CROSBY 1022712 HOOK 3 TON WEB ALLOY CROSBY
1010514 CLAMP 38 CABLE FIST GRIP CROSBY 1011743 HOOK 34 SLIDING CHOKER ALLOY CROSBY
1010097 CLAMP 38 CABLE FORGED CROSBY 1004349 HOOK 34 SWIVEL SHURLOC CROSBY
1010499 CLAMP 516 CABLE FIST GRIP CROSBY 1022200 HOOK 34 TON EYE CARBON CROSBY
1010079 CLAMP 516 CABLE FORGED CROSBY 1022205 HOOK 34 TON EYE CARBON WLATCH CROSBY
1010550 CLAMP 58 CABLE FIST GRIP CROSBY 1048600 HOOK 34 TON SWIVEL CARBON NEW CROSBY
1010177 CLAMP 58 CABLE FORGED CROSBY 1027141 HOOK 38 CLEVIS GRAB CARBON CROSBY
1010113 CLAMP 716 CABLE FORGED CROSBY 1027285 HOOK 38 CLEVIS GRAB G70 CROSBY
1010596 CLAMP 78 CABLE FIST GRIP CROSBY 1027560 HOOK 38 CLEVIS SLIP ALLOY CROSBY
1010211 CLAMP 78 CABLE FORGED CROSBY 1011707 HOOK 38 SLIDING CHOKER ALLOY CROSBY
1010159 CLAMP 916 CABLE FORGED CROSBY 1021918 HOOK 412 TON CHOKER WEB CROSBY
1013085 CLEVIS 12 DOUBLE CROSBY 1022255 HOOK 5 TON EYE CARBON CROSBY
1012905 CLEVIS 12 TWIN CROSBY 1022419 HOOK 5 TON EYE HOIST ALLOY CROSBY
1013049 CLEVIS 38 DOUBLE CROSBY 1048837 HOOK 5 TON SWIVEL ALLOY S322AN CROSBY
1012889 CLEVIS 38 TWIN CROSBY 1048645 HOOK 5 TON SWIVEL CARBON 322CN CROSBY
1012861 CLEVIS 516 TWIN CROSBY 1022723 HOOK 5 TON WEB ALLOY CROSBY
1013067 CLEVIS 716 DOUBLE CROSBY 1027267 HOOK 516 CLEVIS GRAB ALLOY CROSBY
1090786 EYE 2 PAD CROSBY 1027542 HOOK 516 CLEVIS SLIP ALLOY CROSBY
1090802 EYE 4 PAD CROSBY 1011725 HOOK 58 SLIDING CHOKER ALLOY CROSBY
1090820 EYE 5 PAD CROSBY 1022430 HOOK 7 TON EYE HOIST ALLOY CROSBY
1014431 HAMMERLOK 12 ALLOY G6 CROSBY 1048854 HOOK 7 TON SWIVEL ALLOY S322AN CROSBY
1015122 HAMMERLOK 38 G100 CROSBY 1022264 HOOK 712 TON EYE CARBON CROSBY
1015145 HAMMERLOK 58 G100 CROSBY 1048654 HOOK 712 TON SWIVEL CARBON NEW CROSBY
1022211 HOOK 1 TON EYE CARBON CROSBY 1027301 HOOK 716 CLEVIS GRAB ALLOY CROSBY
1022216 HOOK 1 TON EYE CARBON WLATCH CROSBY 1027588 HOOK 716 CLEVIS SLIP ALLOY CROSBY
1022391 HOOK 1.5 TON EYE ALLOY W/LATCH CROSBY 1028177 HOOK 78 1 CHOKER SLIDING LATCH CROSBY
1022277 HOOK 10 TON EYE CARBON CROSBY 1004313 HOOK 7-8MM SWIVEL SHURLOC CROSBY
1048663 HOOK 10 TON SWIVEL CARBON CROSBY 1029000 HOOK 7MM CLEVIS SHURLOC G100 CROSBY
1029018 HOOK 10MM CLEVIS SHURLOC G100 CROSBY 1023074 HOOK 916 SNAP GALV CROSBY
1004322 HOOK 10MM SWIVEL SHURLOC G100 CROSBY 1028248 HOOK BARREL S377 SELF COLOR CROSBY
1022441 HOOK 11 TON EYE ALLOY CROSBY 1096374 LATCH 1 TON KIT S4320 CROSBY
1048865 HOOK 11 TON SWIVEL ALLOY NEW CROSBY 1096657 LATCH 10 TON S4320 CROSBY
1022386 HOOK 112 TON EYE ALLOY CROSBY 1090063 LATCH 112 2 TON SS4055 CROSBY
1022222 HOOK 112 TON EYE CARBON CROSBY 1096421 LATCH 112 TON S4320 CROSBY
1022227 HOOK 112 TON EYE CARBON WLATCH CROSBY 1096704 LATCH 15 TON S4320 CROSBY
1048813 HOOK 112 TON SWIVEL ALLOY NEW CROSBY 1090143 LATCH 15 TON SS4055 CROSBY
1027329 HOOK 12 CLEVIS GRAB ALLOY CROSBY 1096468 LATCH 2 TON S4320 CROSBY
1027604 HOOK 12 CLEVIS SLIP ALLOY CROSBY 1090161 LATCH 20 TON SS4055 CROSBY
1011716 HOOK 12 SLIDING CHOKER ALLOY CROSBY 1090189 LATCH 25 30 TON SS4055 CROSBY
1029027 HOOK 13MM CLEVIS SHURLOC G100 CROSBY 1096515 LATCH 3 TON S4320 CROSBY
1022932 HOOK 13MM EYE SHURLOC G100 CROSBY 1090081 LATCH 3 TON SS4055 CROSBY

TITAN 2014 / 2015 CATALOGUE 99

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

FITTINGS (pg. 29-50) FITTINGS (pg. 29-50)

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

1096325 LATCH 34 TON S4320 CROSBY 1021138 SHACKLE 134 ALLOY GALV BOLT CROSBY
1090027 LATCH 34 TON SS4055 CROSBY 1019659 SHACKLE 134 ANCHOR GALV BOLT CROSBY
1096562 LATCH 5 TON S4320 CROSBY 1018632 SHACKLE 134 ANCHOR GALV S PIN CROSBY
1090107 LATCH 5 TON SS4055 CROSBY 1018641 SHACKLE 134 ANCHOR SC S PIN CROSBY
1090125 LATCH 712 10 TON SS4055 CROSBY 1017648 SHACKLE 138 ALLOY GALV S PIN CROSBY
1096609 LATCH 712 TON S4320 CROSBY 1019613 SHACKLE 138 ANCHOR GALV BOLT CROSBY
1014331 LINK 1 MASTER ALLOY (WIDE) CROSBY 1018598 SHACKLE 138 ANCHOR GALV S PIN CROSBY
1014766 LINK 1 MASTER SUBASSEMBLY CROSBY 1018605 SHACKLE 138 ANCHOR SC S PIN CROSBY
1290740 LINK 1 tonne PIVOT WELD ON CROSBY 1019466 SHACKLE 14 ANCHOR GALV BOLT CROSBY
1290820 LINK 12 tonne PIVOT WELD ON CROSBY 1018375 SHACKLE 14 ANCHOR GALV S PIN CROSBY
1290768 LINK 2.5 tonne PIVOT WELD ON CROSBY 1018384 SHACKLE 14 ANCHOR SC S PIN CROSBY
1290786 LINK 4 tonne PIVOT WELD ON CROSBY 1021156 SHACKLE 2 ALLOY GALV BOLT TYPE CROSBY
1014280 LINK 58 MASTER ALLOY CROSBY 1019677 SHACKLE 2 ANCHOR GALV BOLT CROSBY
1090535 NUT 12 EYE #4 58 TAP CROSBY 1018669 SHACKLE 2 ANCHOR SC S PIN CROSBY
1090517 NUT 38 EYE #3A 12 TAP CROSBY 1021048 SHACKLE 2 WEB SLING S PIN CROSBY
1090553 NUT 58 EYE #5 34 TAP CROSBY 1021066 SHACKLE 2 WEB SLING S PIN CROSBY
1090599 NUT 78 EYE #7 1 TAP CROSBY 1021174 SHACKLE 212 ALLOY GALV BOLT CROSBY
1090768 PAD 112 EYE CROSBY 1019695 SHACKLE 212 ANCHOR GALV BOLT CROSBY
1082553 PIN 1 SCREW FOR 78 SHACKLE CROSBY 1018687 SHACKLE 212 ANCHOR SC S PIN CROSBY
1082571 PIN 118 SCREW FOR 1 SHACKLE CROSBY 1019711 SHACKLE 3 ANCHOR GALV BOLT CROSBY
1082535 PIN 78 SCREW FOR 34 SHACKLE CROSBY 1017538 SHACKLE 34 ALLOY GALV S PIN CROSBY
1014002 RING 1 PEAR SHAPE SELF COLOR CROSBY 1019515 SHACKLE 34 ANCHOR GALV BOLT CROSBY
1016964 RING 1 SWIVEL HOIST CROSBY 1018491 SHACKLE 34 ANCHOR GALV S PIN CROSBY
1016969 RING 1 SWIVEL HOIST CROSBY 1018507 SHACKLE 34 ANCHOR SC S PIN CROSBY
1014020 RING 114 PEAR SHAPE SELF COLOR CROSBY 1019470 SHACKLE 38 ANCHOR GALV BOLT CROSBY
1013922 RING 12 PEAR SHAPE SELF COLOR CROSBY 1018419 SHACKLE 38 ANCHOR GALV S PIN CROSBY
1016909 RING 12 SWIVEL HOIST CROSBY 1018428 SHACKLE 38 ANCHOR SC S PIN CROSBY
1013968 RING 34 PEAR SHAPE SELF COLOR CROSBY 1019468 SHACKLE 516 ANCHOR GALV BOLT CROSBY
1016931 RING 34 SWIVEL HOIST CROSBY 1018400 SHACKLE 516 ANCHOR SC S PIN CROSBY
1016946 RING 34 SWIVEL HOIST CROSBY 1019490 SHACKLE 58 ANCHOR GALV BOLT CROSBY
1016898 RING 38 SWIVEL HOIST CROSBY 1018473 SHACKLE 58 ANCHOR GALV S PIN CROSBY
1016887 RING 516 SWIVEL HOIST CROSBY 1018482 SHACKLE 58 ANCHOR SC S PIN CROSBY
1013940 RING 58 PEAR SHAPE SELF COLOR CROSBY 1019471 SHACKLE 716 ANCHOR GALV BOLT CROSBY
1016920 RING 58 SWIVEL HOIST CROSBY 1018437 SHACKLE 716 ANCHOR GALV S PIN CROSBY
1016924 RING 58 SWIVEL HOIST CROSBY 1018446 SHACKLE 716 ANCHOR SC S PIN CROSBY
1013986 RING 78 PEAR SHAPE SELF COLOR CROSBY 1017560 SHACKLE 78 ALLOY GALV S PIN CROSBY
1017582 SHACKLE 1 ALLOY GALV SCREW PIN CROSBY 1019533 SHACKLE 78 ANCHOR GALV BOLT CROSBY
1019551 SHACKLE 1 ANCHOR GALV BOLT CROSBY 1018516 SHACKLE 78 ANCHOR GALV S PIN CROSBY
1018534 SHACKLE 1 ANCHOR GALV S PIN CROSBY 1018525 SHACKLE 78 ANCHOR SC S PIN CROSBY
1018543 SHACKLE 1 ANCHOR SC S PIN CROSBY 1041241 SLEEVE 1 STANDARD STEEL CROSBY
1021110 SHACKLE 112 ALLOY GALV BOLT CROSBY 1041321 SLEEVE 112 STANDARD STEEL CROSBY
1019631 SHACKLE 112 ANCHOR GALV BOLT CROSBY 1041287 SLEEVE 114 STANDARD STEEL CROSBY
1018614 SHACKLE 112 ANCHOR GALV S PIN CROSBY 1041269 SLEEVE 118 STANDARD STEEL CROSBY
1018623 SHACKLE 112 ANCHOR SC S PIN CROSBY 1039398 SLEEVE 12 DUPLEX STEEL CROSBY
1021057 SHACKLE 112 WEB SLING S PIN CROSBY 1041143 SLEEVE 12 STANDARD STEEL CROSBY
1017626 SHACKLE 114 ALLOY GALV S PIN CROSBY 1041349 SLEEVE 134 STANDARD STEEL CROSBY
1019597 SHACKLE 114 ANCHOR GALV BOLT CROSBY 1041303 SLEEVE 138 STANDARD STEEL CROSBY
1018570 SHACKLE 114 ANCHOR GALV S PIN CROSBY 1041063 SLEEVE 14 STANDARD STEEL CROSBY
1018589 SHACKLE 114 ANCHOR SC S PIN CROSBY 1041367 SLEEVE 2 STANDARD STEEL CROSBY
1017604 SHACKLE 118 ALLOY GALV S PIN CROSBY 1041401 SLEEVE 212 STANDARD STEEL CROSBY
1019579 SHACKLE 118 ANCHOR GALV BOLT CROSBY 1039450 SLEEVE 34 DUPLEX STEEL CROSBY
1018552 SHACKLE 118 ANCHOR GALV S PIN CROSBY 1041205 SLEEVE 34 STANDARD STEEL CROSBY
1018561 SHACKLE 118 ANCHOR SC S PIN CROSBY 1039352 SLEEVE 38 DUPLEX STEEL CROSBY
1017494 SHACKLE 12 ALLOY GALV S PIN CROSBY 1041107 SLEEVE 38 STANDARD STEEL CROSBY
1019472 SHACKLE 12 ANCHOR GALV BOLT CROSBY 1039334 SLEEVE 516 DUPLEX STEEL CROSBY
1018455 SHACKLE 12 ANCHOR GALV S PIN CROSBY 1041090 SLEEVE 516 STANDARD STEEL CROSBY
1018464 SHACKLE 12 ANCHOR SC S PIN CROSBY 1039432 SLEEVE 58 DUPLEX STEEL CROSBY

100 TITAN 2014 / 2015 CATALOGUE

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

FITTINGS (pg. 29-50) FITTINGS (pg. 29-50)

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

1041189 SLEEVE 58 STANDARD STEEL CROSBY 1021N FERRULE 118 DRUMLINE DLF DRP INDUSTRIES
1039370 SLEEVE 716 DUPLEX STEEL CROSBY 1061L FERRULE 138 DRUMLINE LUFKIN DRP INDUSTRIES
1041125 SLEEVE 716 STANDARD STEEL CROSBY 0121H FERRULE 34 DRUMLINE DJF DRP INDUSTRIES
1039478 SLEEVE 78 DUPLEX STEEL CROSBY 0121N FERRULE 34 DRUMLINE DLF WHITE DRP INDUSTRIES
1041223 SLEEVE 78 STANDARD STEEL CROSBY 0141H FERRULE 78 DRUMLINE DJF RED DRP INDUSTRIES
1039414 SLEEVE 916 DUPLEX STEEL CROSBY 0141N FERRULE 78 DRUMLINE DLF BLACK DRP INDUSTRIES
1041161 SLEEVE 916 STANDARD STEEL CROSBY 66070 HOOK 14 CLEVIS SLIP C/W LATCH DYNALINE
1039735 SOCKET 1 OPEN SPELTER GALV CROSBY 66075 HOOK 38 CLEVIS SLING ALLOY C/W DYNALINE
1039209 SOCKET 1 OPEN SWAGE CROSBY 66074 HOOK 516 CLEVIS SLIP ALLOY C/W DYNALINE
1040082 SOCKET 112 CLOSED SPELTER SC CROSBY 403047 HOOK LANYARD NON LOCKING DYNALINE
1039101 SOCKET 12 OPEN SWAGE CROSBY 66474 PIN 14X514 SAFTEY DYNALINE
1035009 SOCKET 12 WEDGE TERMINATOR CROSBY 66470 PIN 18318 SAFETY DYNALINE
1039469 SOCKET 34 CLOSED SWAGE CROSBY 66472 PIN 316X3-3/8 SAFETY DYNALINE
1039691 SOCKET 34 OPEN SPELTER GALV CROSBY 77100 SWAGER HAND #1 DYNALINE
1039708 SOCKET 34 OPEN SPELTER SC CROSBY 5103273 SLEEVE 516 DUPLEX STAINLESS ESCO
1039165 SOCKET 34 OPEN SWAGE CROSBY CP16 BAR 16 CROW CHISEL POINT G. HJUKSTROM LIMITED
1035027 SOCKET 34 WEDGE TERMINATOR CROSBY 0082 FERRULE 12 TAPERED GARAGE THIBODEAU
1039067 SOCKET 38 OPEN SWAGE CROSBY 0062 FERRULE 38 TAPERED GARAGE THIBODEAU
1035000 SOCKET 38 WEDGE TERMINATOR CROSBY 0102 FERRULE 58 TAPERED GARAGE THIBODEAU
1039637 SOCKET 516 38 OPEN SPELTER GAL CROSBY 589404 C-GRAB 12 DUAL TYPE CGD G100 GUNNEBO
1039441 SOCKET 58 CLOSED SWAGE CROSBY 589403 C-GRAB 38 DUAL TYPE CGD G100 GUNNEBO
1039147 SOCKET 58 OPEN SWAGE CROSBY 589402 C-GRAB 516 DUAL TYPE CGD G100 GUNNEBO
1035018 SOCKET 58 WEDGE TERMINATOR CROSBY 589398 C-GRAB 516 TYPE CG GRABIQ G100 GUNNEBO
1039726 SOCKET 78 OPEN SPELTER SC CROSBY 589394 C-LOK 516 DUAL TYPE CLD GRABIQ GUNNEBO
1039673 SOCKET 916 58 OPEN SPELTER GAL CROSBY 589412 GRAB 12 MASTER DUAL TYPE MGD GUNNEBO
1016536 SWIVEL 1 JAW END GALV CROSBY 589408 GRAB 12 MASTER TYPE MG GRABIQ GUNNEBO
1016153 SWIVEL 1 REGULAR GALV CROSBY 589411 GRAB 38 MASTER DUAL TYPE MGD GUNNEBO
1016572 SWIVEL 114 JAW END GALV CROSBY 589410 GRAB 516 MASTER DUAL TYPE MGD GUNNEBO
1016073 SWIVEL 12 REGULAR GALV CROSBY 589802 HAMMERLOK 12 ALLOY COUPLING GUNNEBO
1016439 SWIVEL 38 JAW END GALV CROSBY 589679 HAMMERLOK 34 ALLOY COUPLING GUNNEBO
1016055 SWIVEL 38 REGULAR GALV CROSBY 589801 HAMMERLOK 38 ALLOY COUPLING GUNNEBO
1016091 SWIVEL 58 REGULAR GALV CROSBY 589803 HAMMERLOK 58 ALLOY COUPLING GUNNEBO
5550985 TAILCHAIN 1 - 118 (9 LINK) CROSBY 589800 HAMMERLOK 932-516 ALLOY COUPLE GUNNEBO
1091525 TAILCHAIN 1 - 118 24” (7 LINK) CROSBY 545822 HOOK 10 TON ALLOY WELD ON GUNNEBO
1091532 TAILCHAIN 114 24” (5LINK) CROSBY 590106 HOOK 10MM SWIVEL SAFETY C/W GUNNEBO
1091482 TAILCHAIN 12 - 58 18” (7 LINK) CROSBY 589562 HOOK 12 CLEVIS GRAB GRABIQ GUNNEBO
1091511 TAILCHAIN 34 - 78 24” (8 LINK) CROSBY 589741 HOOK 12 SELF LOCKING GRABIQ GUNNEBO
6603014 TRIGGER ASSEMBLY 58 KIT 16mm CROSBY 589384 HOOK 12 SLING CLEVIS W/LATCH GUNNEBO
1032974 TURNBUCKLE 112X24 JAW & JAW CROSBY 590107 HOOK 13MM SWIVEL SAFETY C/W GUNNEBO
1032894 TURNBUCKLE 114X18 JAW & JAW CROSBY 590108 HOOK 16MM SWIVEL SAFETY C/W GUNNEBO
1032910 TURNBUCKLE 114X24 JAW & JAW CROSBY 590109 HOOK 20MM SWIVEL SAFETY C/W GUNNEBO
1032554 TURNBUCKLE 12X6 JAW & JAW CROSBY 545823 HOOK 3 TON ALLOY WELD ON GUNNEBO
1032812 TURNBUCKLE 1X12 JAW & JAW CROSBY 589692 HOOK 34 CLEVIS CRADLE G100 GUNNEBO
1032830 TURNBUCKLE 1X18 JAW & JAW CROSBY 589688 HOOK 38 CLEVIS GRAB GRABIQ GUNNEBO
1032858 TURNBUCKLE 1X24 JAW & JAW CROSBY 589649 HOOK 38 SELF LOCKING GRABIQ GUNNEBO
1032714 TURNBUCKLE 34X12 JAW & JAW CROSBY 589383 HOOK 38 SLING CLEVIS W/LATCH GUNNEBO
1032732 TURNBUCKLE 34X18 JAW & JAW CROSBY 545821 HOOK 5 TON ALLOY WELD ON GUNNEBO
1031430 TURNBUCKLE 34X6 EYE & EYE CROSBY 589560 HOOK 516 CLEVIS GRAB GRABIQ GUNNEBO
1032652 TURNBUCKLE 58X12 JAW & JAW CROSBY 589648 HOOK 516 SELF LOCKING GRABIQ GUNNEBO
1032616 TURNBUCKLE 58X6 JAW & JAW CROSBY 589382 HOOK 516 SLING CLEVIS W/LATCH GUNNEBO
1040359I BUTTON 12 SWAGE DRP INDUSTRIES 589563 HOOK 58 CLEVIS CRADLE GRABIQ GUNNEBO
1011N FERRULE 1 1/16 DRUMLINE DLF PU DRP INDUSTRIES 589651 HOOK 58 SELF LOCKING GRABIQ GUNNEBO
1001H FERRULE 1 DRUMLINE DJF BLUE DRP INDUSTRIES 589501 HOOK 58 SLING CLEVIS W/LATCH GUNNEBO
1001N FERRULE 1 DRUMLINE DLF GREEN DRP INDUSTRIES 590104 HOOK 8MM SWIVEL SAFETY C/W GUNNEBO
1041H FERRULE 114 DRUMLINE DJF ORANG DRP INDUSTRIES 589711 HOOK 932 SLING CLEVIS W/LATCH GUNNEBO
1041L FERRULE 114 DRUMLINE LUFKIN DRP INDUSTRIES 545827 LATCH 10 TON KIT GUNNEBO
1021H FERRULE 118 DRUMLINE DJF YELLW DRP INDUSTRIES 471784 LATCH 10-15 TON JL-10-15 GUNNEBO

TITAN 2014 / 2015 CATALOGUE 101

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

FITTINGS (pg. 29-50) FITTINGS (pg. 29-50)

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

589449 LATCH 12 FOR EK/EKN/LKN/LKNK GUNNEBO 1018491I SHACKLE 34 ANCHOR GALV S PIN INDUSCO
589604 LATCH 15 TON: UKN-15 HOOK GUNNEBO 1018419I SHACKLE 38 ANCHOR GALV S PIN INDUSCO
471785 LATCH 20-25 TON JL-20-25 GUNNEBO 1019490I SHACKLE 58 ANCHOR GALV BOLT INDUSCO
471786 LATCH 30 TON JL-30 GUNNEBO 1018473I SHACKLE 58 ANCHOR GALV S PIN INDUSCO
471787 LATCH 35-45 TON JL-40 GUNNEBO 1019533I SHACKLE 78 ANCHOR GALV BOLT INDUSCO
589448 LATCH 38 FOR EK/EKN/LKN/LKNK GUNNEBO 1018516I SHACKLE 78 ANCHOR GALV S PIN INDUSCO
545961 LATCH 38 KIT: GKN & OKN HOOKS GUNNEBO 1037256I THIMBLE 18 STANDARD GALVANIZED INDUSCO
511821 LATCH 38 REPAIR KIT OBK-GBK GUNNEBO 1037274I THIMBLE 316 STANDARD INDUSCO
589576 LATCH 5 & 8 TON KIT GUNNEBO 1037336I THIMBLE 38 STANDARD INDUSCO
511811 LATCH 516 REPAIR KIT OBK-GBK GUNNEBO 1032590I TURNBUCKLE 12X12 JAW & JAW INDUSCO
471783 LATCH 7 TON JL-7 GUNNEBO 1032554I TURNBUCKLE 12X6 JAW & JAW INDUSCO
589447 LATCH 932 FOR EK/EKN/LKN/LKNK GUNNEBO 1032572I TURNBUCKLE 12X9 JAW & JAW INDUSCO
589424 LIFTING POINT 5 TON WELD-ON GUNNEBO 1032812I TURNBUCKLE 1X12 JAW & JAW INDUSCO
589619 LINK 1 MASTER OBLONG G100 GUNNEBO 1032830I TURNBUCKLE 1X18 JAW & JAW INDUSCO
589388 LINK 1 MASTER OBLONG GRABIQ GUNNEBO 1032714I TURNBUCKLE 34X12 JAW & JAW INDUSCO
589632 LINK 1 MASTER SUB ASSEMBLY GUNNEBO 1032732I TURNBUCKLE 34X18 JAW & JAW INDUSCO
589622 LINK 112 MASTER OBLONG G100 GUNNEBO 1032670I TURNBUCKLE 34X6 JAW & JAW INDUSCO
589620 LINK 114 MASTER OBLONG G100 GUNNEBO 1032698I TURNBUCKLE 34X9 JAW & JAW INDUSCO
589633 LINK 114 MASTER SUB ASSEMBLY GUNNEBO 1030057I TURNBUCKLE 38X6 HOOK & HOOK INDUSCO
589456 LINK 118 MASTER OVERSIZED G100 GUNNEBO 1032536I TURNBUCKLE 38X6 JAW & JAW INDUSCO
589615 LINK 12 MASTER OBLONG G100 GUNNEBO 1031412I TURNBUCKLE 58X12 EYE & EYE INDUSCO
589624 LINK 134 MASTER OBLONG GUNNEBO 1032652I TURNBUCKLE 58X12 JAW & JAW INDUSCO
589621 LINK 138 MASTER OBLONG G100 GUNNEBO 1032634I TURNBUCKLE 58X9 JAW & JAW INDUSCO
589389 LINK 138 MASTER OBLONG GRABIQ GUNNEBO 1032778I TURNBUCKLE 78X18 JAW & JAW INDUSCO
589457 LINK 138 MASTER OVERSIZED G100 GUNNEBO 4030472L HOOK LANYARD DOUBLE LOCKING INTERNATIONAL
589634 LINK 158 MASTER SUB ASSEMBLY GUNNEBO LANDMARK
589625 LINK 2 MASTER OBLONG GUNNEBO 135M BLADE & PIN - 131M CUTTER MORSE-STARRETT
589617 LINK 34 MASTER OBLONG G100 GUNNEBO 105M BLADE & PIN-101M & 121M CUTTER MORSE-STARRETT
589630 LINK 34 MASTER SUB ASSEMBLY GUNNEBO 101M CUTTER CABLE 101 MODEL#1 MORSE-STARRETT
589616 LINK 58 MASTER OBLONG G100 GUNNEBO 121M CUTTER CABLE 121 MODEL#1A MORSE-STARRETT
589386 LINK 58 MASTER OBLONG GRABIQ GUNNEBO 131M CUTTER CABLE 131 MODEL#2 MORSE-STARRETT
589387 LINK 78 MASTER OBLONG GRABIQ GUNNEBO P1125 CUTTER CABLE HYDRAULIC MODEL P MORSE-STARRETT
589631 LINK 78 MASTER SUB ASSEMBLY GUNNEBO 20TH58 THIMBLE 58 ROUND PLASTIC NEWCO
471784S SPRING 10-15 TON FOR JL LATCH GUNNEBO G3601 HOOK LANYARD DOUBLE LOCKING NIAGARA SAFETY
471785S SPRING 20-25 TON FOR JL LATCH GUNNEBO 1041N FERRULE 114 DRUMLINE DLF NOREX MANUFACTURING
471786S SPRING 30 TON FOR JL30 LATCH GUNNEBO KHS130 HOOK 12 SLING CLEVIS W/LATCH PEWAG INC
471787S SPRING 35-40 TON FOR JL LATCH GUNNEBO KHS100 HOOK 38 SLING CLEVIS W/LATCH PEWAG INC
471783S SPRING 3-7 TON FOR JL LATCH GUNNEBO KHS70 HOOK 932 SLING CLEVIS W/LATCH PEWAG INC
471788S SPRING 50-70 TON JL LATCH GUNNEBO 1090252P LATCH 12 SLING HOOK PEWAG INC
590144 TRIGGER 38 KIT FOR BK HKS GUNNEBO 1090251P LATCH 38 SLING HOOK PEWAG INC
590146 TRIGGER 58 KIT FOR BK HKS GUNNEBO 1090253P LATCH 58 SLING HOOK PEWAG INC
40FP2990L HOOK LANYARD 31690 LS HAZMASTERS INC L805 FERRULE 1 L8 GREEN :BRONZE ROBAR INDUSTRIES
1010131I CLAMP 12 CABLE FORGED INDUSCO L807 FERRULE 1(1116)J8 BLUE :BRONZE ROBAR INDUSTRIES
1010051I CLAMP 14 CABLE FORGED INDUSCO L809 FERRULE 114 J10 ORANGE :BRONZE ROBAR INDUSTRIES
1011272S4 CLAMP 14 CABLE STAINLESS S304 INDUSCO L810 FERRULE 114 J10HD BLACK/WHITE ROBAR INDUSTRIES
1010033I CLAMP 316 CABLE FORGED INDUSCO L808 FERRULE 118 J9 YELLOW :BRONZE ROBAR INDUSTRIES
1010514I CLAMP 38 CABLE FIST GRIP G429 INDUSCO L803 FERRULE 34 L6 WHITE :BRONZE ROBAR INDUSTRIES
1010097I CLAMP 38 CABLE FORGED INDUSCO L806 FERRULE 78 J7 RED :BRONZE ROBAR INDUSTRIES
1010079I CLAMP 516 CABLE FORGED INDUSCO L804 FERRULE 78 L7 BLACK :BRONZE ROBAR INDUSTRIES
160420L GRIP HAVEN 1/8”-1/2” KLEIN INDUSCO L801 FERRULE 916-58 B5 MAROON:BRONZ ROBAR INDUSTRIES
162520 GRIP HAVEN 9/32”-3/4” KLEIN INDUSCO 8429200 HOOK 14/516 CLEVIS [Link] SECURITY CHAIN
1018534I SHACKLE 1 ANCHOR GALV S PIN INDUSCO 2400127 HOOK CLUSTER R,T,J SECURITY CHAIN
1019597I SHACKLE 114 ANCHOR GALV BOLT INDUSCO SO1600006 LINK 14 QUICK STAINLESS S316 SUNCOR STAINLESS
1018570I SHACKLE 114 ANCHOR GALV S PIN INDUSCO 1038022S6 THIMBLE 12 STAINLESS HD S316 SUNCOR STAINLESS
1018552I SHACKLE 118 ANCHOR GALV S PIN INDUSCO 1037274LS4 THIMBLE 316 STAINLESS LGT S304 SUNCOR STAINLESS
1018455I SHACKLE 12 ANCHOR GALV S PIN INDUSCO 6020000 BELL CHOKER MICRO MIDGET TRANS PACIFIC
1019613I SHACKLE 138 ANCHOR GALV BOLT INDUSCO 6020001 BELL CHOKER MIDGET TRANS PACIFIC

102 TITAN 2014 / 2015 CATALOGUE

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

FITTINGS (pg. 29-50) FITTINGS (pg. 29-50)

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

1037817I THIMBLE 1 HEAVY UNIMARK 393100241 HOOK 38 CLEVIS GRAB LATCHED VANGUARD STEEL
1037853I THIMBLE 114 138 HEAVY UNIMARK 0014 SLEEVE 116 OVAL ALUMINUM VANGUARD STEEL
1037835I THIMBLE 118 114 HEAVY UNIMARK 0044 SLEEVE 14 DUPLEX ALUMINUM VANGUARD STEEL
1037719I THIMBLE 12 HEAVY UNIMARK 0024 SLEEVE 18 DUPLEX ALUMINUM VANGUARD STEEL
1037915I THIMBLE 134 HEAVY DUTY UNIMARK 0034 SLEEVE 316 DUPLEX ALUMINUM VANGUARD STEEL
1037871I THIMBLE 138 112 HEAVY UNIMARK 00154 SLEEVE 332 DUPLEX ALUMINUM VANGUARD STEEL
1037639I THIMBLE 14 HEAVY UNIMARK 0064 SLEEVE 38 DUPLEX ALUMINUM VANGUARD STEEL
1037773I THIMBLE 34 HEAVY UNIMARK 0054 SLEEVE 516 DUPLEX ALUMINUM VANGUARD STEEL
1037675I THIMBLE 38 HEAVY UNIMARK 00254 SLEEVE 532 DUPLEX ALUMINUM VANGUARD STEEL
1037657I THIMBLE 516 HEAVY UNIMARK 0046 STOP 14 ALUMINUM VANGUARD STEEL
1037755I THIMBLE 58 HEAVY UNIMARK 0026 STOP 18 ALUMINUM VANGUARD STEEL
1037693I THIMBLE 716 HEAVY UNIMARK 0036 STOP 316 ALUMINUM VANGUARD STEEL
1037791I THIMBLE 78 HEAVY UNIMARK 00156 STOP 332 ALUMINUM VANGUARD STEEL
1019551VB SHACKLE 1 ANCHOR GP BOLT VANBEEST 1037354I THIMBLE 12 STANDARD GALVANIZED VANGUARD STEEL
1018543VB SHACKLE 1 ANCHOR GP S PIN VANBEEST 807813 CLUTCH 1/2 SHORTENING G80 YOKE
ASGHMB25 SHACKLE 1 ANCHOR WIDE MOUTH GP VANBEEST 807807 CLUTCH 14/516 SHORTENING G80 YOKE
1019631VB SHACKLE 112 ANCHOR GP BOLT VANBEEST 807810 CLUTCH 3/8 SHORTENING G80 YOKE
1018623VB SHACKLE 112 ANCHOR GP S PIN VANBEEST 801526 HAMMERLOK 1 CONNECTING LINK YOKE
ASGHMB38 SHACKLE 112 ANCHOR WIDE MOUTH VANBEEST 801513 HAMMERLOK 12 CONNECTING LINK YOKE
1019597VB SHACKLE 114 ANCHOR GP BOLT VANBEEST X01513 HAMMERLOK 12 CONNECTING LINK YOKE
1018589VB SHACKLE 114 ANCHOR GP S PIN VANBEEST 801507 HAMMERLOK 14/516 CONNECT LINK YOKE
1019579VB SHACKLE 118 ANCHOR GP BOLT VANBEEST X01507 HAMMERLOK 14/516 CONNECT LINK YOKE
1018561VB SHACKLE 118 ANCHOR GP S PIN VANBEEST 801520 HAMMERLOK 34 CONNECTING LINK YOKE
1019472VB SHACKLE 12 ANCHOR GP BOLT VANBEEST X01520 HAMMERLOK 34 CONNECTING LINK YOKE
1018464VB SHACKLE 12 ANCHOR GP S PIN VANBEEST 801510 HAMMERLOK 38 CONNECTING LINK YOKE
1019659VB SHACKLE 134 ANCHOR GP BOLT VANBEEST X01510 HAMMERLOK 38 CONNECTING LINK YOKE
1018641VB SHACKLE 134 ANCHOR GP S PIN VANBEEST 801516 HAMMERLOK 58 CONNECTING LINK YOKE
1019613VB SHACKLE 138 ANCHOR GP BOLT VANBEEST X01516 HAMMERLOK 58 CONNECTING LINK YOKE
1018605VB SHACKLE 138 ANCHOR GP S PIN VANBEEST 801522 HAMMERLOK 78 CONNECTING LINK YOKE
1019466VB SHACKLE 14 ANCHOR GP BOLT VANBEEST 819301 HOOK 1 TON EYE CARBON W/LATCH YOKE
1018384VB SHACKLE 14 ANCHOR GP S PIN VANBEEST 8193015 HOOK 1.5 TON EYE CARBON W/LATC YOKE
1019677VB SHACKLE 2 ANCHOR GP BOLT VANBEEST 804213 HOOK 12 CLEVIS GRAB G80 YOKE
1018669VB SHACKLE 2 ANCHOR GP S PIN VANBEEST X02613 HOOK 12 CLEVIS LOCKING G100 YOKE
1019695VB SHACKLE 212 ANCHOR GP BOLT VANBEEST 802613 HOOK 12 CLEVIS LOCKING G80 YOKE
1018687VB SHACKLE 212 ANCHOR GP S PIN VANBEEST X043S13 HOOK 12 CLEVIS SLING LATCH YOKE
1019711VB SHACKLE 3 ANCHOR GP BOLT VANBEEST 8043S13 HOOK 12 CLEVIS SLING LATCH G80 YOKE
1019515VB SHACKLE 34 ANCHOR GP BOLT VANBEEST X04713 HOOK 12 EYE FOUNDRY G100 YOKE
1018507VB SHACKLE 34 ANCHOR GP S PIN VANBEEST 804713 HOOK 12 EYE FOUNDRY G80 YOKE
1019470VB SHACKLE 38 ANCHOR GP BOLT VANBEEST 802513 HOOK 12 EYE SELF LOCKING G80 YOKE
1018428VB SHACKLE 38 ANCHOR GP S PIN VANBEEST X04213 HOOK 12 GRAB CLEVIS G100 YOKE
1019468VB SHACKLE 516 ANCHOR GP BOLT VANBEEST 802713 HOOK 12 SWIVEL LOCKING G80 YOKE
1018400VB SHACKLE 516 ANCHOR GP S PIN VANBEEST X04207 HOOK 14/516 CLEVIS GRAB G100 YOKE
1019490VB SHACKLE 58 ANCHOR GP BOLT VANBEEST 804207 HOOK 14/516 CLEVIS GRAB G80 YOKE
1018482VB SHACKLE 58 ANCHOR GP S PIN VANBEEST 802607 HOOK 14/516 CLEVIS LOCKING G80 YOKE
1019471VB SHACKLE 716 ANCHOR GP BOLT VANBEEST 8043S07 HOOK 14/516 CLEVIS SLING LATCH YOKE
1018446VB SHACKLE 716 ANCHOR GP S PIN VANBEEST X043S07 HOOK 14/516 CLEVIS SLING LATCH YOKE
1019533VB SHACKLE 78 ANCHOR GP BOLT VANBEEST 804707 HOOK 14/516 EYE FOUNDRY G80 YOKE
1018525VB SHACKLE 78 ANCHOR GP S PIN VANBEEST 802507 HOOK 14/516 SELF LOCKING G80 YOKE
1900027I CLAMP 14 CABLE MALLEABLE VANGUARD STEEL 802707 HOOK 14/516 SWIVEL LOCKING G80 YOKE
1900009I CLAMP 18 CABLE MALLEABLE VANGUARD STEEL 808102 HOOK 2 TON EXCAVATOR WELD-ON YOKE
1011250S4 CLAMP 18 CABLE STAINLESS S316 VANGUARD STEEL 817302 HOOK 2 TON EYE ALLOY W/LATCH YOKE
1900018I CLAMP 316 CABLE MALLEABLE VANGUARD STEEL 819302 HOOK 2 TON EYE CARBON W/LATCH YOKE
1900045I CLAMP 38 CABLE MALLEABLE VANGUARD STEEL 808103 HOOK 3 TON EXCAVATOR WELD-ON YOKE
1011283S4 CLAMP 38 CABLE STAINLESS S304 VANGUARD STEEL 817303 HOOK 3 TON EYE ALLOY W/LATCH YOKE
1900036I CLAMP 516 CABLE MALLEABLE VANGUARD STEEL 819303 HOOK 3 TON EYE CARBON W/LATCH YOKE
1010079S4 CLAMP 516 CABLE STAINLESS S304 VANGUARD STEEL 81930075 HOOK 34 TON EYE CARBON W/LATCH YOKE
C7 CUTTER CABLE C7 8” VANGUARD STEEL X02610 HOOK 38 CLEVIS LOCKING G100 YOKE

TITAN 2014 / 2015 CATALOGUE 103

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

FITTINGS (pg. 29-50) HOISTING EQUIPMENT (pg. 53-71)

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

802610 HOOK 38 CLEVIS LOCKING G80 YOKE 53781 FRICTION DISC .75TON CRANEX
X043S10 HOOK 38 CLEVIS SLING LATCH YOKE 53782 FRICTION DISC 1.5 TON CRANEX
8043S10 HOOK 38 CLEVIS SLING LATCH G80 YOKE 53821 LATCH 1.5 TON KIT 653 SERIES CRANEX
X04710 HOOK 38 EYE FOUNDRY G100 YOKE 40904 WASHER FRICTION 640-123 CRANEX
804710 HOOK 38 EYE FOUNDRY G80 YOKE T2T50GM WINCH 50 WORK MAN RATED HAZMASTERS INC
802510 HOOK 38 EYE SELF LOCKING G80 YOKE KLB5056 CHAIN .75 TON LOAD L5A KITO
X04210 HOOK 38 GRAB CLEVIS G100 YOKE KCF071 CHAIN 1.5 TON LOAD KITO CF4 KITO
804210 HOOK 38 GRAB CLEVIS G80 YOKE KLB5071 CHAIN 1.5 TON LOAD L5A KITO
802710 HOOK 38 SWIVEL LOCKING G80 YOKE KLB5100 CHAIN 3 TON LOAD KITO L5A KITO
817305 HOOK 5 TON EYE ALLOY W/LATCH YOKE KCB3090 CHAIN 9MM LOAD KITO
819305 HOOK 5 TON EYE CARBON W/LATCH YOKE L5045030 CHAIN STOPPER 3 TON L5 KITO
804216 HOOK 58 CLEVIS GRAB G80 YOKE CF150AF010 FRICTION DISC KITO
X02616 HOOK 58 CLEVIS LOCKING G100 YOKE CF150AF005 FRICTION DISC .5 TON KITO CF4 KITO
X043S16 HOOK 58 CLEVIS SLING LATCH YOKE L4151008 FRICTION DISC L4 KITO KITO
8043S16 HOOK 58 CLEVIS SLING LATCH G80 YOKE L4151015 FRICTION DISC L4 KITO KITO
X04216 HOOK 58 GRAB CLEVIS G100 YOKE M3B151025 FRICTION DISC M3B KITO
802716 HOOK 58 SWIVEL LOCKING G80 YOKE CF071015 LATCH 1.5 TON KIT FOR KITO KITO
80741416 HOOK 916 SLIDING CHOKER ‘KF’ YOKE L51071008 LATCH ASSY .75 TON KITO KITO
806745LH HOOK CONTAINER EYE G80 LEFT YOKE L51071015 LATCH ASSY 1.5 TON KITO KITO
806745RH HOOK CONTAINER EYE G80 RIGHT YOKE L41071008 LATCH HOOK ASSEMBLY .75 TON L4 KITO
45000 HOOK LANYARD DOUBLE LOCKING YOKE L41071015 LATCH HOOK ASSEMBLY 1.5 TON L4 KITO
8P04413 LATCH 12 KIT: 8-043 & 8-044 YOKE L5LB008-10 LEVER HOIST 3/4TON 10FT LIFT KITO
8P04407 LATCH 14-516 KIT:8-043 & 8-044 YOKE L51021008 LOWER HOOK ASSY .75 TON KITO KITO
8P04410 LATCH 38 KIT: 8-043 & 8-044 YOKE L51021015 LOWER HOOK ASSY 1.5 TON KITO KITO
8P04416 LATCH 58 KIT: 8-043 & 8-044 YOKE L5LB008-5 PULLER .75 TON L5LB 5’ LIFT KITO
80573T LIFTING POINT 3 TON WELD-ON YOKE L5LB015-10 PULLER 1.5 TON L5LB 10’ LIFT KITO
80575T LIFTING POINT 5 TON WELD-ON YOKE L51001008 TOP HOOK ASSY .75 TON KITO KITO
800316 LINK 1 MASTER OBLONG G80 YOKE L51001015 TOP HOOK ASSY 1.5 TON KITO KITO
800319 LINK 114 MASTER OBLONG G80 YOKE L5933008 WARNING TAG L4 KITO KITO
80031613 LINK 118 MASTER OBLONG G80 YOKE T7150 GROOVED SHEAR PIN FOR T-7 SUSPENDED STAGES
80030806 LINK 12 MASTER OBLONG G80 YOKE T13358 HANDLE FOR T-13 SUSPENDED STAGES
800313 LINK 34 MASTER OBLONG G80 YOKE T13351 PLUG FOR T-13 SUSPENDED STAGES
80031008 LINK 58 MASTER OBLONG G80 YOKE T13350 SHEAR PIN FOR T-13 SUSPENDED STAGES
80031310 LINK 78 MASTER OBLONG G80 YOKE T-7 TIRFOR .75 TON TIRMASTER SUSPENDED STAGES
8P02513 TRIGGER 12 KIT FOR YOKE HOOKS YOKE T-13 TIRFOR 1.5 TON TIRMASTER SUSPENDED STAGES
8P02510 TRIGGER 38 KIT FOR YOKE HOOKS YOKE NEO500 MAGNET LIFTING 0-1100LB PLATE WALKER MAGNETICS
8P02516 TRIGGER 58 KIT FOR YOKE HOOKS YOKE
MEASURING LINE (pg. 78)
HOISTING EQUIPMENT (pg. 51-69) ITEM DESCRIPTION VENDOR
ITEM DESCRIPTION VENDOR
WM820920E2B MEASURING LINE 092X10000 PLOW WIRECO
09005W CLAMP 10 TON BEAM COFFING CM WM820920E3B MEASURING LINE 092X15000 PLOW WIRECO
09002W CLAMP 2 TON BEAM COFFING CM WM820920B MEASURING LINE 092X20000 PLOW WIRECO
09003W CLAMP 3 TON BEAM COFFING CM
09004W CLAMP 5 TON BEAM COFFING CM PLATE CLAMPS (pg. 59-61)
2256 HOIST 1 TON CHAIN 622 10’LIFT CM ITEM DESCRIPTION VENDOR
2262 HOIST 1 TON CHAIN 622 20’LIFT CM
2233 HOIST 2 TON CHAIN 622 20’LIFT CM 2717054 CAMSEGMENT 1 TON IP10/IPU10 CROSBY
0210 PULLER .25 TON 602 MINI RATCH CM 2717108 CAMSEGMENT 2 TON IPUN/ IP10 CROSBY
5311 PULLER .75 TON 653 CM 10’ LIFT CM 2701663 CLAMP 1 TON PLATE IPU10 CROSBY
5310 PULLER .75 TON CM 653 5’ LIFT CM 2701676 CLAMP 2 TON PLATE IP10 CROSBY
5316 PULLER 1.5 TON CM 653 10’LIFT CM 2701677 CLAMP 2 TON PLATE IPU10 CROSBY
5315 PULLER 1.5 TON CM 653 5’ LIFT CM 2714009 EYE 34 TON HOISTING IP CROSBY
5321 PULLER 3 TON 653 10’ LIFT CM 2710018 PIVOT .75/1 TON IP10 & 1PU10 CROSBY
3304 TROLLEY 1 TON CM633 PLAIN CM 2710054 PIVOT 1.5/2 TON IP CROSBY
3306 TROLLEY 2 TON CM633 PLAIN CM 2710027 PIVOT COMPLETE FOR 3 TON IP10 CROSBY
45741 DISC FRICTION 646-9B CRANEX

104 TITAN 2014 / 2015 CATALOGUE

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

ROUND SLINGS (pg. 16-17) ROUND SLINGS (pg. 16-17)

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

A12IX10 SLING A12X10 ROUND BROWN JULI HOLDING A6X06 SLING A6X06 ROUND GREEN FLAG TITAN
A12IX12 SLING A12X12 ROUND BROWN JULI HOLDING A6X08 SLING A6X08 ROUND GREEN FLAG TITAN
A14IX06 SLING A14X06 ROUND RED JULI HOLDING A6X10 SLING A6X10 ROUND GREEN FLAG TITAN
A14IX08 SLING A14X08 ROUND RED JULI HOLDING A6X12 SLING A6X12 ROUND GREEN FLAG TITAN
A14IX10 SLING A14X10 ROUND RED JULI HOLDING A6X16 SLING A6X16 ROUND GREEN FLAG TITAN
A14IX12 SLING A14X12 ROUND RED JULI HOLDING A6X20 SLING A6X20 ROUND GREEN FLAG TITAN
A14IX14 SLING A14X14 ROUND RED JULI HOLDING A70X20 SLING A70X20 ROUND ORANGE FLAG TITAN
A14IX16 SLING A14X16 ROUND RED JULI HOLDING A70X20PT SLING A70X20 ROUND ORANGE FLAG TITAN
A23IX10 SLING A23X10 ROUND BLUE JULI HOLDING A90X20 SLING A90X20 ROUND ORANGE FLAG TITAN
A23IX12 SLING A23X12 ROUND BLUE JULI HOLDING A9X04 SLING A9X04 ROUND YELLOW FLAG TITAN
A23IX16 SLING A23X16 ROUND BLUE JULI HOLDING A9X06 SLING A9X06 ROUND YELLOW FLAG TITAN
A23IX20 SLING A23X20 ROUND BLUE JULI HOLDING A9X08 SLING A9X08 ROUND YELLOW FLAG TITAN
A32IX20 SLING A32X20 ROUND ORANGE JULI HOLDING A9X10 SLING A9X10 ROUND YELLOW FLAG TITAN
A3IX04 SLING A3X04 ROUND PURPLE JULI HOLDING A9X12 SLING A9X12 ROUND YELLOW FLAG TITAN
A3IX06 SLING A3X06 ROUND PURPLE JULI HOLDING A9X20 SLING A9X20 ROUND YELLOW FLAG TITAN
A3IX08 SLING A3X08 ROUND PURPLE JULI HOLDING
A40IX20 SLING A40X20 ROUND ORANGE JULI HOLDING
SAFETY
A6IX04 SLING A6X04 ROUND GREEN JULI HOLDING ITEM DESCRIPTION VENDOR

A6IX06 SLING A6X06 ROUND GREEN JULI HOLDING

34041 WIRE ROPE LUBE AEROSOL JET
A6IX08 SLING A6X08 ROUND GREEN JULI HOLDING
TRCS-C CABLE GRAB 3/8 C/W CARABINER NORTH SAFETY
A6IX10 SLING A6X10 ROUND GREEN JULI HOLDING
FP5386 HOOK DROP FORGED REBAR(LADDER) NORTH SAFETY
A9IX06 SLING A9X06 ROUND YELLOW JULI HOLDING
TRS/20FT MILLER VIGO LADDER SYSTEM 20’ NORTH SAFETY
A9IX08 SLING A9X08 ROUND YELLOW JULI HOLDING
FP7700 RING 38X3-1/8” I.D. ROUND LW PENSAFE
A9IX10 SLING A9X10 ROUND YELLOW JULI HOLDING
A9IX12 SLING A9X12 ROUND YELLOW JULI HOLDING SLING PROTECTION (pg. 18-19)
A12X06 SLING A12X06 ROUND BROWN FLAG TITAN
ITEM DESCRIPTION VENDOR
A12X16 SLING A12X16 ROUND BROWN FLAG TITAN
A14X04 SLING A14X04 ROUND RED FLAG TITAN
CRNMX02 WEARPAD 4 CORNERMAX TITAN
A14X06 SLING A14X06 ROUND RED FLAG TITAN
CRNMX04 WEARPAD 6 CORNEMAX TITAN
A14X08 SLING A14X08 ROUND RED FLAG TITAN
A14X10 SLING A14X10 ROUND RED FLAG TITAN WEB SLINGS (pg. 15)
A14X12 SLING A14X12 ROUND RED FLAG TITAN ITEM DESCRIPTION VENDOR
A14X12BJ SLING A14X12 ROUND RED FLAG TITAN
A14X14 SLING A14X14 ROUND RED FLAG TITAN EE2902X10I SLING 2X10 2PLY TYPE4 WEB SLING TECH
A14X16 SLING A14X16 ROUND RED FLAG TITAN EE2902X12I SLING 2X12 2PLY TYPE4 WEB SLING TECH
A14X16BJ SLING A14X16 ROUND RED FLAG TITAN WP4V PAD 4 WEAR VELCRO TITAN
A14X20 SLING A14X20 ROUND RED FLAG TITAN EE2901X02 SLING 1X02 2PLY TYPE4 WEB TITAN
A14X24BJ SLING A14X24 ROUND RED FLAG TITAN EE2901X02PT SLING 1X02 2PLY TYPE4 WEB TITAN
A17X10 SLING A17X10 ROUND WHITE FLAG TITAN EE1901X03 SLING 1X03 1PLY TYPE4 WEB TITAN
A17X12 SLING A17X12 ROUND WHITE FLAG TITAN EE2901X03 SLING 1X03 2PLY TYPE4 WEB TITAN
A23X06 SLING A23X06 ROUND BLUE FLAG TITAN EE1901X03T3 SLING 1X03 WEB 1PLY TYPE3 TITAN
A23X10 SLING A23X10 ROUND BLUE FLAG TITAN EN1901X03 SLING 1X03 WEB 1PLY TYPE5 TITAN
A23X12 SLING A23X12 ROUND BLUE FLAG TITAN EN2901X03 SLING 1X03 WEB 2PLY TYPE5 TITAN
A23X14 SLING A23X14 ROUND BLUE FLAG TITAN EE1901X04 SLING 1X04 1PLY TYPE4 WEB TITAN
A23X15 SLING A23X15 ROUND BLUE FLAG TITAN EE2901X04 SLING 1X04 2PLY TYPE4 WEB TITAN
A23X20 SLING A23X20 ROUND BLUE FLAG TITAN EE2901X04PT SLING 1X04 2PLY TYPE4 WEB TITAN
A26X10 SLING A26X10 ROUND ORANGE FLAG TITAN EN1901X04 SLING 1X04 WEB 1PLY TYPE5 TITAN
A26X20 SLING A26X20 ROUND ORANGE FLAG TITAN EE2901X04T3 SLING 1X04 WEB 2PLY TYPE3 TITAN
A32X20 SLING A32X20 ROUND ORANGE FLAG TITAN EE2901X05 SLING 1X05 2PLY TYPE4 WEB TITAN
A3X04 SLING A3X04 ROUND PURPLE FLAG TITAN EE1901X06 SLING 1X06 1PLY TYPE4 WEB TITAN
A3X06 SLING A3X06 ROUND PURPLE FLAG TITAN EE2901X06 SLING 1X06 2PLY TYPE4 WEB TITAN
A40X14 SLING A40X14 ROUND ORANGE FLAG TITAN EE2901X06PT SLING 1X06 2PLY TYPE4 WEB TITAN
A40X20 SLING A40X20 ROUND ORANGE FLAG TITAN EN2901X06 SLING 1X06 WEB 2PLY TYPE5 TITAN
A54X12 SLING A54X12 ROUND ORANGE FLAG TITAN EE2901X08 SLING 1X08 2PLY TYPE4 WEB TITAN
A54X14 SLING A54X14 ROUND ORANGE FLAG TITAN EE2901X08PT SLING 1X08 2PLY TYPE4 WEB TITAN
A6X03 SLING A6X03 ROUND GREEN FLAG TITAN EN2901X08 SLING 1X08 WEB 2PLY TYPE5 TITAN
A6X04 SLING A6X04 ROUND GREEN FLAG TITAN EE2901X10PT SLING 1X10 2PLY TYPE4 WEB TITAN

TITAN 2014 / 2015 CATALOGUE 105

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

WEB SLINGS (pg. 15) WEB SLINGS (pg. 15)

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

EE2901X10T3 SLING 1X10 WEB 2PLY TYPE3 TITAN EE2903X20PT SLING 3X20 2PLY TYPE4 WEB TITAN
EE2901X10 SLING 1X10 WEB 2PLY TYPE4 TITAN EE2903X25 SLING 3X25 2PLY TYPE4 WEB TITAN
EN2901X10 SLING 1X10 WEB 2PLY TYPE5 TITAN EE2904X04 SLING 4X04 2PLY TYPE4 WEB TITAN
EE2901X12 SLING 1X12 2PLY TYPE4 WEB TITAN EE2904X06 SLING 4X06 2PLY TYPE4 WEB TITAN
EE2901X12PT SLING 1X12 2PLY TYPE4 WEB TITAN EE2904X08 SLING 4X08 2PLY TYPE4 WEB TITAN
SAN112 SLING 1X12 NYLON LANYARD HOOKS TITAN EE2904X10 SLING 4X10 2PLY TYPE4 WEB TITAN
EE2901X12LH SLING 1X12 WEB 2PLY LAN HKS TITAN EE2904X10PT SLING 4X10 2PLY TYPE4 WEB TITAN
EE2901X12T3 SLING 1X12 WEB 2PLY TYPE3 TITAN EE2904X12 SLING 4X12 2PLY TYPE4 WEB TITAN
EN2901X12 SLING 1X12 WEB 2PLY TYPE5 TITAN EE2904X14 SLING 4X14 2PLY TYPE4 WEB TITAN
EE2901X16PT SLING 1X16 2PLY TYPE4 WEB TITAN EE2904X15 SLING 4X15 2PLY TYPE4 WEB TITAN
EE2901X20 SLING 1X20 2PLY TYPE4 WEB TITAN EE2904X16 SLING 4X16 2PLY TYPE4 WEB TITAN
EE2901X20PT SLING 1X20 2PLY TYPE4 WEB TITAN EE2904X18 SLING 4X18 2PLY TYPE4 WEB TITAN
EE2902X02 SLING 2X02 2PLY TYPE4 WEB TITAN EE2904X20 SLING 4X20 2PLY TYPE4 WEB TITAN
EE2902X02PT SLING 2X02 2PLY TYPE4 WEB TITAN EE2904X20PT SLING 4X20 2PLY TYPE4 WEB TITAN
EE2902X02T3 SLING 2X02 WEB 2PLY TYPE3 TITAN EE2904X25 SLING 4X25 2PLY TYPE4 WEB TITAN
EE2902X03 SLING 2X03 2PLY TYPE4 WEB TITAN EE2904X30 SLING 4X30 2PLY TYPE4 WEB TITAN
EE2902X03T3 SLING 2X03 WEB 2PLY TYPE3 TITAN EE2904X38 SLING 4X38 WEB 2PLY TYPE4 TITAN
EE2902X04 SLING 2X04 2PLY TYPE4 WEB TITAN EE2904X40 SLING 4X40 2PLY TYPE4 WEB TITAN
EE2902X04PT SLING 2X04 2PLY TYPE4 WEB TITAN EE2906X20 SLING 6X20 2PLY TYPE4 WEB TITAN
EE2902X06 SLING 2X06 2PLY TYPE4 WEB TITAN PROPANESLING SLING PROPANE LIFTING 20 LBS TITAN
EE2902X06PT SLING 2X06 2PLY TYPE4 WEB TITAN
EN1902X06 SLING 2X06 WEB 1PLY TYPE5 TITAN WIRE ROPE, DOMESTIC (PG. 70-76)
EE2902X06T3 SLING 2X06 WEB 2PLY TYPE3 TITAN ITEM DESCRIPTION VENDOR

EE2902X08DEPT SLING 2X08 2PLY TYPE4 [Link] TITAN

100M401D ROPE 1 WIRE 6X36 IWRC WHITE WIRECO
EE2902X08 SLING 2X08 2PLY TYPE4 WEB TITAN
100M501D ROPE 1 WIRE 6X36 IWRC XIP RRL WIRECO
EE2902X08PT SLING 2X08 2PLY TYPE4 WEB TITAN
100N501D ROPE 1 WIRE FLEX-X 6/36 RRL WIRECO
EN1902X08 SLING 2X08 WEB 1PLY TYPE5 TITAN
101M401D ROPE 1116 WIRE 6X36 IWRC DOM. WIRECO
EE2902X10 SLING 2X10 2PLY TYPE4 WEB TITAN
108M501D ROPE 112 WIRE 6X36 IWRC XIP RR WIRECO
EE2902X10PT SLING 2X10 2PLY TYPE4 WEB TITAN
104M401D ROPE 114 WIRE 6X36 IWRC WHITE WIRECO
EE2902X12 SLING 2X12 2PLY TYPE4 WEB TITAN
104M501D ROPE 114 WIRE 6X36 IWRC XIP RR WIRECO
EE2902X12PT SLING 2X12 2PLY TYPE4 WEB TITAN
104N501D ROPE 114 WIRE FLEX-X 6/36 RRL WIRECO
EE2902X14 SLING 2X14 2PLY TYPE4 WEB TITAN
102M401D ROPE 118 WIRE 6X36 IWRC WHITE WIRECO
EE2902X14PT SLING 2X14 2PLY TYPE4 WEB TITAN
102M501D ROPE 118 WIRE 6X36 IWRCXIP RRL WIRECO
EE2902X15 SLING 2X15 2PLY TYPE4 WEB TITAN
102N501D ROPE 118 WIRE FLEX-X6/36 RRL WIRECO
EE2902X16 SLING 2X16 2PLY TYPE4 WEB TITAN
008K501D ROPE 12 WIRE 6X26 IWRC XIP RRL WIRECO
EE2902X16PT SLING 2X16 2PLY TYPE4 WEB TITAN
008M501D ROPE 12 WIRE 6X36 IWRC XIP RRL WIRECO
EE2902X16T3C SLING 2X16 WEB 2PLY TYPE3 C TITAN
008F533D ROPE 12 WIRE FLEX-X 19 RRL WIRECO
EE2902X18 SLING 2X18 2PLY TYPE4 WEB TITAN
012K513D ROPE 34 WIRE 6X26 IWRC XIP PFV WIRECO
EE2902X20 SLING 2X20 2PLY TYPE4 WEB TITAN
012K501D ROPE 34 WIRE 6X26 IWRC XIP RRL WIRECO
EE2902X20PT SLING 2X20 2PLY TYPE4 WEB TITAN
012M401D ROPE 34 WIRE 6X36 IWRC WHITE WIRECO
EE2902X24 SLING 2X24 2PLY TYPE4 WEB TITAN
012M501D ROPE 34 WIRE 6X36 IWRC XIP RRL WIRECO
EE2902X25 SLING 2X25 2PLY TYPE4 WEB TITAN
012G522D ROPE 34 WIRE FLEX X 19 RRL WIRECO
EE2902X30 SLING 2X30 2PLY TYPE4 WEB TITAN
012N501D ROPE 34 WIRE FLEX-X 6/36 RRL WIRECO
EE2902X30PT SLING 2X30 2PLY TYPE4 WEB TITAN
012Y533D ROPE 34 WIRE FLEX-X 7 CC RRL WIRECO
EE2903X04 SLING 3X04 2PLY TYPE4 WEB TITAN
006K501D ROPE 38 WIRE 6X26 IWRC XIP RRL WIRECO
EE2903X06 SLING 3X06 2PLY TYPE4 WEB TITAN
010K501D ROPE 58 WIRE 6X26 IWRC XIP RRL WIRECO
EE2903X06PT SLING 3X06 2PLY TYPE4 WEB TITAN
010M501D ROPE 58 WIRE 6X36 IWRC XIP RRL WIRECO
EE2903X08 SLING 3X08 2PLY TYPE4 WEB TITAN
010G522D ROPE 58 WIRE FLEX-X 19 RRL WIRECO
EE2903X10 SLING 3X10 2PLY TYPE4 WEB TITAN
010Y533D ROPE 58 WIRE FLEX-X 7 CC RRL WIRECO
EE2903X12 SLING 3X12 2PLY TYPE4 WEB TITAN
014M401D ROPE 78 WIRE 6X36 IWRC WHITE WIRECO
EE2903X12PT SLING 3X12 2PLY TYPE4 WEB TITAN
014L501D ROPE 78 WIRE FLEX-X 6/26 IWRC WIRECO
EE2903X14 SLING 3X14 2PLY TYPE4 WEB TITAN
014N501D ROPE 78 WIRE FLEX-X 6/36 RRL WIRECO
EE2903X14PT SLING 3X14 2PLY TYPE4 WEB TITAN
014Y533D ROPE 78 WIRE FLEX-X 7 CC RRL WIRECO
EE2903X15 SLING 3X15 2PLY TYPE4 WEB TITAN
009G522D ROPE 916 WIRE FLEX X 19 RRL WIRECO
EE2903X16 SLING 3X16 2PLY TYPE4 WEB TITAN
009Y533D ROPE 916 WIRE FLEX-X 7 CC RRL WIRECO
EE2903X16PT SLING 3X16 2PLY TYPE4 WEB TITAN
EE2903X20 SLING 3X20 2PLY TYPE4 WEB TITAN

106 TITAN 2014 / 2015 CATALOGUE

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

WIRE ROPE (pg. 72-78) WIRE ROPE (pg. 72-78)

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

281616EH REEL 28X16X16 WOODEN HVY DUTY ALLAN’S WOODCRAFT 004G501I ROPE 14 WIRE 19X7 IWRC XIP NR WIRECO
291916EH REEL 29X19X16 WOODEN ALLAN’S WOODCRAFT 004I501I ROPE 14 WIRE 6X19 IWRC XIP WIRECO
321816EH REEL 32X18X16 WOODEN HVY DUTY ALLAN’S WOODCRAFT 200M501I ROPE 2 WIRE 6X36 IWRC XIP WIRECO
342418EH REEL 34X24X18 WOOD HEAVY DUTY ALLAN’S WOODCRAFT 208M501C ROPE 212 WIRE 6X36 IWRC RRL WIRECO
001B407I ROPE 116 332 WIRE 7X7 PVC CLR ANJI CHANGHONG CHAIN 204M502I ROPE 214 WIRE 6X49 IWRC RLL WIRECO
001B404I ROPE 116 WIRE 7X7 G AIRCRAFT ANJI CHANGHONG CHAIN 012G501I ROPE 34 WIRE 19X7 IWRC XIP NR WIRECO
001B410I ROPE 116 WIRE 7X7 SS AIRCRAFT ANJI CHANGHONG CHAIN 012J517C ROPE 34 WIRE 6X25 POWERFLEX WIRECO
004C407IR ROPE 14 516 WIRE 7X19 PVC RED ANJI CHANGHONG CHAIN 012K504I ROPE 34 WIRE 6X26 IWRC GALV WIRECO
004C404I ROPE 14 WIRE 7X19 G AIRCRAFT ANJI CHANGHONG CHAIN 012K501I ROPE 34 WIRE 6X26 IWRC XIP WIRECO
004C410I ROPE 14 WIRE 7X19 SS304 AC ANJI CHANGHONG CHAIN 012M501I ROPE 34 WIRE 6X36 IWRC XIP WIRECO
002C407I ROPE 18 316 WIRE 7X19 PVC CLR ANJI CHANGHONG CHAIN 012M503I ROPE 34 WIRE 6X36 LEFT LAY WIRECO
002C404I ROPE 18 WIRE 7X19 G AIRCRAFT ANJI CHANGHONG CHAIN 006G501I ROPE 38 WIRE 19X7 IWRC XIP NR WIRECO
002C410I ROPE 18 WIRE 7X19 SSAC T304 ANJI CHANGHONG CHAIN 006A832C ROPE 38 WIRE 1X7 GUY STRAND WIRECO
003C404I ROPE 316 WIRE 7X19 G AIRCRAFT ANJI CHANGHONG CHAIN 006K501I ROPE 38 WIRE 6X26 IWRC XIP WIRECO
003C410I ROPE 316 WIRE 7X19 SS304 AC ANJI CHANGHONG CHAIN 006M501I ROPE 38 WIRE 6X36 IWRC XIP WIRECO
0015B407IC ROPE 332 316 WIRE 7X7 PVC CLR ANJI CHANGHONG CHAIN 006Q501I ROPE 38 WIRE 8X19 IWRC XIP WIRECO
0015B404I ROPE 332 WIRE 7X7 G AIRCRAFT ANJI CHANGHONG CHAIN 005G501I ROPE 516 WIRE 19X7 IWRC XIP NR WIRECO
006C404I ROPE 38 WIRE 7X19 G AIRCRAFT ANJI CHANGHONG CHAIN 005A832C ROPE 516 WIRE 1X7 GUY STRAND WIRECO
0025C404I ROPE 532 WIRE 7X19 G AIRCRAFT ANJI CHANGHONG CHAIN 005K501I ROPE 516 WIRE 6X26 IWRC XIP WIRECO
008010K423I ROPE 12 58 WIRE 6X26 PVC CLR BEN-MOR INC 005M501I ROPE 516 WIRE 6X36 IWRC XIP WIRECO
004C407I ROPE 14 516 WIRE 7X19 PVC CLR BEN-MOR INC 010G522I ROPE 58 WIRE 19X7 COMPACTED WIRECO
002C411I ROPE 18 WIRE 7X19 SS316 AC BEN-MOR INC 010G501I ROPE 58 WIRE 19X7 IWRC XIP NR WIRECO
006C407I ROPE 38 716 WIRE 7X19 PVC CLR BEN-MOR INC 010K504I ROPE 58 WIRE 6X26 IWRC GALV WIRECO
005C407I ROPE 516 38 WIRE 7X19 PVC CLR BEN-MOR INC 010K501I ROPE 58 WIRE 6X26 IWRC XIP WIRECO
005C404I ROPE 516 WIRE 7X19 G AIRCRAFT BEN-MOR INC 010K516I ROPE 58 WIRE 6X26 SWAGED RRL WIRECO
0025C411I ROPE 532 WIRE 7X19 SS316 AC BEN-MOR INC 010M501I ROPE 58 WIRE 6X36 IWRC XIP WIRECO
012J513I ROPE 34 WIRE 6X25 IWRC PFV RLL DOBUL INTERNATIONAL 010Q501I ROPE 58 WIRE 8X19 IWRC XIP WIRECO
014H522I ROPE 78 WIRE 18X19 COMPACTED DOBUL INTERNATIONAL 007G501I ROPE 716 WIRE 19X7 IWRC XIP NR WIRECO
180909 REEL 18X9X9 WOODEN REDCLIFF STAKE 007A832C ROPE 716 WIRE 1X7 GUY STRAND WIRECO
230712 REEL 23X7X12 WOODEN REDCLIFF STAKE 007K504I ROPE 716 WIRE 6X26 IWRC GALV WIRECO
230712IPPC REEL 23X7X12 WOODEN IPPC REDCLIFF STAKE 007K501I ROPE 716 WIRE 6X26 IWRC XIP WIRECO
251212 REEL 25X12X12 WOODEN REDCLIFF STAKE 007M501I ROPE 716 WIRE 6X36 IWRC XIP WIRECO
80306M REEL 8.5X6X3.5 METAL SPOOLON 014K501I ROPE 78 WIRE 6X26 IWRC XIP WIRECO
MANUFACTURING 014M501I ROPE 78 WIRE 6X36 IWRC XIP WIRECO
004M501I ROPE 14 WIRE 6X36 IWRC XIP TRANS PACIFIC 009G522I ROPE 916 WIRE 19X7 COMPACTED WIRECO
140708P REEL 14X7X8 PLASTIC VANDOR 009G501I ROPE 916 WIRE 19X7 IWRC XIP NR WIRECO
003C407I ROPE 316 14 WIRE 7X19 PVC CLR VANGUARD STEEL 009K501I ROPE 916 WIRE 6X26 IWRC XIP WIRECO
0015B407C ROPE 332 18 WIRE 7X7 PVC CLEAR VANGUARD STEEL 009M501I ROPE 916 WIRE 6X36 IWRC XIP WIRECO
006C410I ROPE 38 WIRE 7X19 SS304 AC VANGUARD STEEL
005C410I ROPE 516 WIRE 7X19 SS304 AC VANGUARD STEEL WIRE SLINGS (pg. 1-14)
100K501I ROPE 1 WIRE 6X26 IWRC XIP WIRECO ITEM DESCRIPTION VENDOR
100M501I ROPE 1 WIRE 6X36 IWRC XIP WIRECO
101M501I ROPE 1116 WIRE 6X36 IWRC XIP WIRECO WHIP14X24 SLING 14X24” WHIPCHECK BEN-MOR INC
108M501I ROPE 112 WIRE 6X36 IWRC XIP WIRECO WHIP14X38 SLING 14X38” WHIPCHECK BEN-MOR INC
104K501I ROPE 114 WIRE 6X26 IWRC XIP WIRECO 35250-022 SLING 18 X 23 WIRE 1/2 EYES BEN-MOR INC
104M501I ROPE 114 WIRE 6X36 IWRC XIP WIRECO 00203SH SLING 18X03 WIRE SNAP HOOKS BEN-MOR INC
102K501I ROPE 118 WIRE 6X26 IWRC XIP WIRECO WHIP18X20 SLING 18X20” WHIPCHECK (HOSE BEN-MOR INC
102M501I ROPE 118 WIRE 6X36 IWRC XIP WIRECO WHIP38X48 SLING 38X48” WHIPCHECK BEN-MOR INC
102M503I ROPE 118 WIRE 6X36 LEFT LAY WIRECO WHIP516X38 SLING 516X38” WHIPCHECK BEN-MOR INC
008G522I ROPE 12 WIRE 19X7 COMPACTED WIRECO 10226LSI SLING 118X26 LOADING JULI HOLDING
008G501I ROPE 12 WIRE 19X7 IWRC XIP NR WIRECO 10026LSI SLING 1X26 LOADING JULI HOLDING
008L501I ROPE 12 WIRE 6X26 COMPACTED WIRECO 401000CC KIT 1000CC WIRELOK STRIDER RESOURCE
008K504I ROPE 12 WIRE 6X26 IWRC GALV WIRECO 40100CC KIT 100CC WIRELOK STRIDER RESOURCE
008K501I ROPE 12 WIRE 6X26 IWRC XIP WIRECO 40250CC KIT 250CC WIRELOK STRIDER RESOURCE
008M501I ROPE 12 WIRE 6X36 IWRC XIP WIRECO 40500CC KIT 500CC WIRELOK STRIDER RESOURCE
112M501I ROPE 134 WIRE 6X36 IWRC WIRECO 2665093 ROPE 214X67 WIRE EXC PDCC TITAN
106M501I ROPE 138 WIRE 6X36 IWRC XIP WIRECO 516100 CABLE 516X100 TIRFOR TITAN

TITAN 2014 / 2015 CATALOGUE 107

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

WIRE SLINGS (pg. 1-14) WIRE SLINGS (pg. 1-14)

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

51666 CABLE 516X66 TIRFOR TITAN 01206SE SLING 34X06 WIRE STANDARD EYES TITAN
716100 CABLE 716X100 TIRFOR TITAN 01206SEPT SLING 34X06 WIRE STANDARD EYES TITAN
71666 CABLE 716X66 TIRFOR TITAN 01208SE SLING 34X08 WIRE STANDARD EYES TITAN
10126LS SLING 1116X26 LOADING TITAN 01208SEPT SLING 34X08 WIRE STANDARD EYES TITAN
10126LSD SLING 1116X26 LOADING DOMESTIC TITAN 01210SE SLING 34X10 WIRE STANDARD EYE TITAN
10128LS SLING 1116X28 LOADING TITAN 01210SEPT SLING 34X10 WIRE STANDARD EYE TITAN
10226LS SLING 118X26 LOADING TITAN 01212SE SLING 34X12 WIRE STANDARD EYES TITAN
10228LS SLING 118X28 LOADING TITAN 01212SEPT SLING 34X12 WIRE STANDARD EYES TITAN
10228LSB SLING 118X28 LOADING [Link] TITAN TANK34X15 SLING 34X15 WIRE TANK TITAN
10230LS SLING 118X30 LOADING TITAN 01220SE SLING 34X20 WIRE STANDARD EYES TITAN
00804SE SLING 12X04 WIRE STANDARD EYES TITAN 01220SEPT SLING 34X20 WIRE STANDARD EYES TITAN
00804SEPT SLING 12X04 WIRE STANDARD EYES TITAN 00602SE SLING 38X02 WIRE STANDARD EYES TITAN
00806SE SLING 12X06 WIRE STANDARD EYES TITAN 00602SEPT SLING 38X02 WIRE STANDARD EYES TITAN
00806SEPT SLING 12X06 WIRE STANDARD EYES TITAN 00604SE SLING 38X04 WIRE STANDARD EYES TITAN
00808SE SLING 12X08 WIRE STANDARD EYES TITAN 00604SEPT SLING 38X04 WIRE STANDARD EYES TITAN
00808SEPT SLING 12X08 WIRE STANDARD EYES TITAN 00606SE SLING 38X06 WIRE STANDARD EYES TITAN
00810SE SLING 12X10 WIRE STANDARD EYES TITAN 00606SEPT SLING 38X06 WIRE STANDARD EYES TITAN
00810SEPT SLING 12X10 WIRE STANDARD EYES TITAN 00608SE SLING 38X08 WIRE STANDARD EYES TITAN
00812SE SLING 12X12 WIRE STANDARD EYES TITAN 00608SEPT SLING 38X08 WIRE STANDARD EYES TITAN
00812SEPT SLING 12X12 WIRE STANDARD EYES TITAN 00610SE SLING 38X10 WIRE STANDARD EYES TITAN
00816SE SLING 12X16 WIRE STANDARD EYES TITAN 00610SEPT SLING 38X10 WIRE STANDARD EYES TITAN
00816SEPT SLING 12X16 WIRE STANDARD EYES TITAN 00612SE SLING 38X12 WIRE STANDARD EYES TITAN
00820SE SLING 12X20 WIRE STANDARD EYES TITAN 00612SEPT SLING 38X12 WIRE STANDARD EYES TITAN
00820SEPT SLING 12X20 WIRE STANDARD EYES TITAN 00630CT SLING 38X30 WIRE CAR TIEDOWN TITAN
10620SE SLING 138X20 WIRE STANDARD EYE TITAN 01004SE SLING 58X04 WIRE STANDARD EYES TITAN
10002GR SLING 1X02 ENDLESS GROMMET TITAN 01004SEPT SLING 58X04 WIRE STANDARD EYES TITAN
10010SE SLING 1X10 WIRE STANDARD EYES TITAN 01006SE SLING 58X06 WIRE STANDARD EYES TITAN
10010SEPT SLING 1X10 WIRE STANDARD EYES TITAN 01006SEPT SLING 58X06 WIRE STANDARD EYES TITAN
10012SE SLING 1X12 WIRE STANDARD EYES TITAN 01008SE SLING 58X08 WIRE STANDARD EYES TITAN
10012SEPT SLING 1X12 WIRE STANDARD EYES TITAN 01008SEPT SLING 58X08 WIRE STANDARD EYES TITAN
10015GR SLING 1X18”(INCH) GROMMET TITAN 01010SE SLING 58X10 WIRE STANDARD EYES TITAN
10020SE SLING 1X20 WIRE STANDARD EYES TITAN 01010SEPT SLING 58X10 WIRE STANDARD EYES TITAN
10020SEPT SLING 1X20 WIRE STANDARD EYES TITAN 01012SE SLING 58X12 WIRE STANDARD EYES TITAN
10024LS SLING 1X24 LOADING TITAN 01012SEPT SLING 58X12 WIRE STANDARD EYES TITAN
10026LS SLING 1X26 LOADING TITAN 00708IS SLING 716X08 WIRE C/W HOOKS TITAN
10026LSD SLING 1X26 LOADING DOMESTIC TITAN 01418THHS SLING 78X18 WIRE THIM/SPLICED TITAN
10028LS SLING 1X28 LOADING TITAN 01424LS SLING 78X24 LOADING TITAN
10028LSD SLING 1X28 LOADING DOMESTIC TITAN 01426LS SLING 78X26 LOADING TITAN
01204SE SLING 34X04 WIRE STANDARD EYES TITAN 00502LPD2 SLING 516X02 LINEPIPE DOUBLE UNIMARK
01204SEPT SLING 34X04 WIRE STANDARD EYES TITAN 00503LPD2 SLING 516X03 LINEPIPE DOUBLE UNIMARK

108 TITAN 2014 / 2015 CATALOGUE

[Link]
BLADES & EDGES
GRADER BLADES

Grader Scarifier Bits & Boards

C855HDX C855LR C858KCSB C87KCSBSR C

Grader Bits
Part Number Description Notes A B C

C855HDX Blunt Grading Bit Sandvik® Style 2.876” 1.375” 0.875”

C855LR Sharp Grading Bit Sandvik® Style 2.947” 1.375” 0.875”
C858KCSB Large Grading Bit Kennametal® Style 3.362” 1.450” 0.875”
C87KCSBSR Large Grading Bit (Barbed Ring) Kennametal® Style 3.373” 1.489” 0.875”
C1002443SB Large Grading Bit Mining Bit 4.009” 1.637” 0.960”
C87GB Replacement Block for Sleeves or Barbed Ring

B
30°

*Kennametal bits are not compatable with Sanvik style boards due to larger bit body width.

Board Systems
Part Number Description # of Bits Bit Spacing Thickness A B

2000-36-34 36” Sandvik® spacing for Sleeve Bits* 24 1.500” 1.00” 35.874” 5.858”
2000-48-34 48” Sandvik® spacing for Sleeve Bits* 32 1.500” 1.00” 47.874” 5.858”
2100-36-34 36” Kennametal® spacing for Sleeve or Barbed Ring Bits 21 1.713” 1.00” 35.874” 5.858”
2100-48-34 48” Kennametal® spacing for Sleeve or Barbed Ring Bits 28 1.713” 1.00” 47.874” 5.858”
2500-36-34 36” for Sleeve Mining Bits with 1” Shank 21 1.713” 1.00” 35.874” 5.894”
2500-48-34 48” for Sleeve Mining Bits with 1” Shank 28 1.713” 1.00” 47.874” 5.894”

Board Systems are punched for 3/4” Plow Bolts. Reducer bolts are available to adapt to 5/8” holes.

TITAN 2014 / 2015 CATALOGUE 109

BLADES & EDGES
GRADER BLADES

Curved Carbide Grader Blades

Single Beveled
Curved Carbide Impregnated

Single Beveled Curved

T = 25° Trapezoid U = 40° Trapezoid B = Bullnose D = Tall Bullnose

.36 .36 .36 .36

.632 .795 .567 .760

Several carbide insert options are
available to suit the many different
applications and requirements.

Black Cat Curved Carbide Grader Blades are a superior choice for any in better material flow when used on Graders and Underbody plows.
low impact, high abrasion application. The Inserted Carbide teamed with Tungsten Carbide inserts result in a blade with extremely long wear life
abrasive resistant impregnation (Carbide Inserted/Carbide Impregnated) allowing for fewer blade changes and an excellent resistance to “crowning”
significantly extends the life of the parent material when used in applications for applications that require a level grading operation.
where “face” wear is a problem. The curved shape of the blades results

110 TITAN 2014 / 2015 CATALOGUE

BLADES & EDGES
WING & PLOW BLADES

Snow Plow Parts

Tungsten Carbide Inserted Plow Blades
Black Cat Tungsten Carbide Inserted Plow sizes and shapes of the inserted blade
Blades are manufactured using the best are designed to allow mounting in different
quality sintered virgin tungsten carbide configurations on the many different snow
inserts available. Carbide inserts are brazed plows in use around the world.
into a milled slot in the wearing edge of
the blade to extend the life of the blade. Available Profiles Weight per Foot

These carbide inserts are an extremely hard 3/4” x 5” 12.75 lbs

material that will resist wear by an estimated 3/4” x 6” 15.36 lbs
20 times over steel blades. The steel blade
7/8” x 5” 14.86 lbs
is primarily the “holder” for the carbide
7/8” x 6” 17.85 lbs
inserts which alone are too fragile to be
3/4” x 5” Curved 12.25 lbs
used for plowing roadways. The different
1” x 7” Curved 24.00 lbs

Tungsten Carbide Protection Options

Tungsten Carbide is an extremely hard Carbide Overlay is applied to the face of
wear material that will resist abrasion the steel holder blade to harden the surface
very well. Because of this high hardness, and keep the face from wearing too quickly
the inserts are subject to fracturing in some in abrasive applications. Carbide Over
applications. Several options are available Carbide is the ultimate in protection, an
to protect the carbide insert to prolong impact grade carbide tile is brazed in place
BCB Shield Carbide Carbide the life of the blade. The BCB Shield is over the high wear grade carbide insert to
Overlay over applied to absorb shock and impact to absorb shock and eliminate face wear.
Carbide
help eliminate carbide fracturing.

Tungsten Carbide Inserts T = 25° Trapezoid U = 40° Trapezoid B = Bullnose D = Tall Bullnose

Several carbide insert options are available

to suit the many different applications and
requirements. The most popular insert in
North America is the 25 degree trapezoid
.36 .36 .36 .36
shape. Some agencies specify larger
inserts like the 40 degree trap. The size and
shape of the insert is often specified by the
requesting agency. .632 .795 .567 .760

BCB500 High Alloy, High Abrasion Through Hardened Plow Blades

Available Profiles Weight per Foot Black Cat BCB500 Plow Blades offer the are warranted against breakage during their
user a high alloy steel blade which has usable life! If these blades break before they
1/2” x 6” 10.20 lbs
been through hardened to increase the are worn out, Black Cat will replace them
5/8” x 6” 12.72 lbs abrasion resistance and impact strength. (see Black Cat Blades Through Hardened
3/4” x 6” 15.36 lbs BCB500 Plow Blades are so tough they Warranty for details).
1” x 6” 20.38 lbs
5/8” x 8” 17.04 lbs
3/4” x 8” 20.40 lbs
1” x 8” 27.24 lbs

TITAN 2014 / 2015 CATALOGUE 111

BLADES & EDGES
WING & PLOW BLADES

Snow Plow Parts

BCB300 High Carbon Plow Blades
Black Cat Snow Plow Blades are width, length, and mounting hole type, Available Profiles Weight per Foot
manufactured from the highest quality hot location and spacing. Mounting holes are
3/8” x 6” 7.65 lbs
rolled steel bars available. The “Standard” traditionally square holes for carriage bolts
1/2” x 6” 10.20 lbs
in snow plow blades is the High Carbon but many users now use countersunk holes
5/8” x 6” 12.72 lbs
alloy steel blade. The hardness and wear and plow bolts. Hole location on the blade
3/4” x 6” 15.36 lbs
resistance in these products is obtained requires determining the distance from the
at the steel mill by adding elements top of the blade to the center of the holes, 1/2” x 8” 13.56 lbs

to the molten steel, primarily Carbon. referred to as the “Gauge”, and the spacing 5/8” x 8” 17.04 lbs

The “Carbon” plow blade is relatively of the holes (always measured center to 3/4” x 8” 20.40 lbs
simple, the differences being thickness, center) across the length. 1” x 8” 27.24 lbs

BladeRunner Extended Wear Life Blades

BladeRunner Extended Wear Life Blades and are to be used where the customer HWG HWP HWW
For Grader For Front Plow For Wing Blades
are Premium Alloy Steel blades designed requires longer blade life but tungsten
to extend the wear life of the edge, carbide inserted blades are not practical. C C C

reducing the need for blade changes. The BladeRunner will withstand impact and
These high strength blades will bolt to rough surfaces that would normally fracture
virtually any snow plow or motor grader carbide blades.
B B B

E E E
D D

Hole Spacing Bolt Hole

Part Number Description Weight Holes A B C D End to 1 1 to 2 2 to 3 Size

HWW40 40” Wing Blade 88.6 lbs 19 39.88

HWW44 44” Wing Blade 98.1 lbs 21 43.88 6.00” 0.75” 2.69” 70.0° 1.94” 2.00” 2.00” 0.63”
HWW48 48” Wing Blade 104.2 lbs 23 47.88
HWG36 36” Grader Blade 83.9 lbs 7 35.88
6.00” 0.75” 2.69” 70.0° 2.94” 3.00” 6.00” 0.75”
HWG48 48” Grader Blade 108.7 lbs 9 47.88
HWP36 36” Plow Blade 108.6 lbs 17 35.88
HWP40 40” Plow Blade 120.4 lbs 19 39.88
7.81” 0.75” 2.50” 50.0° 1.94” 2.00” 2.00” 0.63”
HWP44 44” Plow Blade 132.1 lbs 21 43.88
HWP48 48” Plow Blade 151.2 lbs 23 47.88

Edge Extendors
Black Cat Edge Extendors are designed to bolt over the end section of steel or tungsten
carbide inserted plow blades to guard the end of the plow and extend the life of the blades.
The Extendor is designed with 2” hole spacing so it will bolt to virtually any plow and the
holes are countersunk on both sides so it can be used on either
Part Number Part Name Weight
end of the plow. Optional Tungsten Carbide overlays or inserts
can be added to increase the wear life in critical areas. PGB8614 14” Edge Extendor 27.0 lbs
PGB8624 24” Edge Extendor 41.8 lbs

Curb Guards Part Number Part Name Weight

10620029 Universal Plow Curb Runner 14.2 lbs

6R1458 Grader Curb Runner (5/8 Bolts) 36.2 lbs
10620029 6R1458 6R1434 Grader Curb Runner (3/4 Bolts) 37.3 lbs

112 TITAN 2014 / 2015 CATALOGUE

BLADES & EDGES
WING & PLOW BLADES

Snow Plow Parts Part Number Description Material Weight A B C

1021562 Frink® Shoe Grey Iron 14.8 lbs 8.00” 10.00” 75°
Moldboard Shoes 10628008 Tenco® Shoe Grey Iron 32.2 lbs 8.00” 11.29” 45°
10628039 Tenco® Wing Shoe Grey Iron 26.7 lbs 8.00” 10.50” 70/80°
A 600A55X8 Plow Shoe Alloy Steel 16.9 lbs 8.00” 10.00” 50°
600G55X8 Plow Shoe Grey Iron 16.6 lbs 8.00” 10.00” 50°
600G70X8 Wing Shoe Grey Iron 20.4 lbs 8.00” 10.50” 70°
600A70X12 Wing Shoe Alloy Steel 32.7 lbs 12.00” 14.00” 70°
2185 EDF® Plow Shoe Grey Iron 21.3 lbs 8.00” 11.75” 70°
C
2185A EDF® Plow Shoe Alloy Steel 22.8 lbs 8.00” 9.75” 70°
301-13 Plow Shoe Grey Iron 23.1 lbs 8.00” 12.75” n/a
B
V4832 MTO Shoe Grey Iron 28.8 lbs 8.00” 9.75” 72.9°

600A70X12 600G70X8 2185 1021562 10628008 10628039 600A55X8

Plow Runners Part Number Description Material Weight A B C

(Frame Shoes) & Holders 605-42 Runner Shoe Grey Iron 42.6 lbs 1.13” 7.00” 21.94”
605-A8 Runner Shoe Alloy Steel 33.6 lbs 1.00” 8.00” 20.18”
605-7C16I Runner Shoe Carbide Inserted 30.5 lbs 0.88” 6.00” 20.18”
A
605-7C18I Runner Shoe Carbide Inserted 30.6 lbs 0.88” 6.00” 20.18”
C 605-7C24I Runner Shoe Carbide Inserted 30.8 lbs 0.88” 6.00” 20.18”
V8290 Adjuster Bar Alloy Steel 8.2 lbs n/a n/a n/a
V8291-75 Runner Holder Alloy Steel 17.4 lbs n/a n/a n/a
B 10MUSH Mushroom Runner Grey Iron 41.9 lbs 2.38” 12.00” 12.00”
10MUSH-13H Runner Holder Alloy Steel 9.7 lbs n/a n/a n/a
10628003 Tenco* Runner Grey Iron 21.3 lbs 2.38” 5.00” 11.00”

605-42 605-A8 V8291-75 V8290 10 MUSH 10MUSH-13H 10628003

High Alloy Cast Plow Nose Shoes Part Number Part Name Weight

10628028 Tenco® Nose Shoe 1 1.0 lbs

10 Viking® Nose Shoe 13.2 lbs
HWPNR-10 BladeRunner Viking® Nose Shoe 25.5 lbs
HWPNR-FRI BladeRunner Frink® Nose Shoe 25.2 lbs
FRI 54IR Frink® Nose Shoe 13.5 lbs
10628028 HWPNR-10 HWPNR-FRI BC 10 FRI 541R FRI 54IL Frink® Nose Shoe 13.5 lbs

Carbide Runner Shoes and Noses

Tungsten Carbide Tiles or inserts can be added to any Alloy
Steel Runner Shoes or Nose Pieces to increase the wear life in
demanding applications.
605-7C18I 605-7C16I 541RCIt
1” x 1” x 3/16”

TITAN 2014 / 2015 CATALOGUE 113

BLADES & EDGES
WING & PLOW BLADES

The Revolutionary Joma 6000 System

SnoShock Extend Carbide Blade Life up to 2X or More!
Longer Wear Life Minimized Vibration
The fact that there is no metal to metal Since the JOMA 6000 is completely
contact between the blade and the plow encased in a rubber mounting, there is
allows the blade to absorb shock transmitted no metal to metal contact between the
from the road surface. This shock-absorbing blade and the plow. The rubber mount
feature protects the insert from severe impact absorbs most of the vibration that would
and fracturing resulting in longer insert life. normally be transferred to the plow and the
Bottom line; reduced damage to the carbide truck. Vibration is the chief cause of many
combined with a larger insert results in structural failures and also contributes to
dramatically longer wear life. operator fatigue. The elimination of most
of the vibration is sure to result in reduced
Highway Markings maintenance costs and have a positive
effect on operator comfort and safety.
Another cost saving feature of the
JOMA 6000 is the reduction in damage
to highway lane markings. The rubber
mounting helps to eliminate the chatter or
bounce commonly found with a rigid blade.
The rigidity of a steel blade combined with
chatter contributes to the degradation
of road markings. The JOMA 6000 has
proven to substantially reduce the cost
of maintaining highway lane markings.

Noise Reduction Curb Runner

Noise is another cause of operator fatigue, Protects the end of blade and oldboard
not to mention the overall effect of noise from rubbing against curbs etc.
Plow Bolts, Nuts & Washers
pollution. Once again the rubber mount
utilized by the JOMA 6000 helps to dampen
the sound produced by contact with the
road, combined with any plow generated
noise. The operator will readily notice this Clamp Bar with Angle Iron Stop
Stops rotation of end segments.
feature along with reduced vibration.

Adapter Plates
Cleaner Roads = Reduced Salt/ Used to adapt JOMA to
Sand Consumption non standard spacing.

Unlike a rigid steel blade, the JOMA 6000

will form to the contour of the road. In
doing so it cleans the road surface more Standard
effectively and therefore may require Clamp Bars
less salt or sand to be applied. This in 3’ & 4’ lengths
itself could save a substantial amount of Curb Bumper
expense since salt and sand are one of the Wraps around end of blade,
useful for protecting outside edge of plow
highest costs incurred by most highways and blade bottom edge. Also used to prevent
maintenance operations. A cleaner road leading edge of JOMA blade from catching in
Bolt On Back Support
surface should also add considerably Provides back support for JOMA blade and/or
roadway obstructions ie. Bridge joints, railway
crossings etc. Bolts over clamping bar.
to highway safety, potentially reducing spaces JOMA away from a step in moldboard.
accidents.

114 TITAN 2014 / 2015 CATALOGUE

BLADES & EDGES
WING & PLOW BLADES

Shock Absorbing Snow Plow Blades

SnoShock Extend Carbide Blade Life up to 2X or More!
- Cushioned Mount Absorbs Shock & Impact
- Shock Absorber Eliminates Carbide Fracturing
- Extra Large Tungsten Carbide Inserts Extend Life
- Hardened Face Shield Eliminates Premature Wear

Black Cat SnoShock Plow Blades are just that, snow plow blades .875” .625”
with built in shock absorbers!

Replacing the normal mounting holes in the steel blade with

specially designed poly bushings allows the blade to move and
float under the weight of the plow. This cushioning effect absorbs
the shock and impact normally transmitted through the blade
and virtually eliminates carbide insert fracturing. The result is 3”
dramatically longer blade life. An integrated “Shield” is designed
into the face of the blade to further protect the carbide inserts
and keep the steel “holder” blade from prematurely wearing.
A hardened steel clamping blade is used over the face of the
SnoShock to mount the assembly to the plow. 6”
0.76”
Black Cat SnoShock Plow Blades are currently available in 7/8” x
6” profile and come standard with Black Cat “Tall Bullnose” inserts, Clamping
offering the user exceptional blade life. Other insert shapes and Blade
sizes can be ordered. Configurations are available for plows with 0.36”
5/8” or 3/4” holes on 12” or 8” hole spacing.
Tall Bullnose
1.5” Insert
Hardened Face Shield

TITAN 2014 / 2015 CATALOGUE 115

BLADES & EDGES
WING & PLOW BLADES

Kennametal I.C.E. Series™ Isolated Carbide-Edged Blades

Specifically engineered to last exceptionally long in even the most I.C.E. Blades • Ordering Information
challenging road conditions.
bolt hole
- Especially effective in applications involving imbedded lane blade catalog material blade distance
markers and rumble strips — greatly reducing blade breakage. length number number dimensions from top hole spacing lbs

- Ideal for high-speed plowing over roads with excessive joints, Square Top Edge for Snowplows
cracks, or uneven surfaces. 36” PB-536 1553693 7/8 x 5 x 36” 1-1/2” 3-3-12-12-3-3” 45
- Ultra-durable, dome-shaped carbide inserts are securely 48” PB-548 1553694 7/8 x 5 x 48” 1-1/2” 3-3-12-12-12-3-3” 62
mounted and strategically isolated from one another to provide Top Edge Beveled for Graders
optimum fracture resistance throughout the entire blade length. 36” PB-636 2035932 7/8 x 5 x 36” 1-1/2” 3-3-12-12-3-3” 45
- Available in 3’ and 4’ (7/8’’-thick; 5’’-high) sections that can 48” PB-648 2035931 7/8 x 5 x 48” 1-1/2” 3-3-12-12-12-3-3” 62
be easily installed and rotated on the plow for balanced wear 60” PB-660 3384812 7/8 x 5 x 60” 1-1/2” 3-3-12-12-12-12-3-3” 72
throughout a season.
- Patented design.

Kennametal I.C.E. Series Center and End Blade Savers

Featuring genuine Kennametal tungsten carbide at the point of I.C.E. Blades • Ordering Information
impact — for ultimate wear resistance and moldboard protection.
part blade hole gauge bolt
- Position at the highest wear areas of your moldboard to ensure number height spacing line length size
substantially improved blade performance and a straight edge, in
End Blade Savers 2-Bolt Styles
even the hardest-packed ice and snow.
2040087 5” 3-3” 1.5” 10.5” 5/8”
- Simply mount over your blades, on either side of the moldboard, 2040088 5” 3-3” 1.5” 10.5” 3/4”
using the same bolt holes. 2040089 6” 3-3” 1.5” 10.5” 5/8”
- Vastly superior to competitive chrome-carbide hardfaced or 2040090 6” 3-3” 1.5” 10.5” 3/4”
hardened-steel offerings. 2040091 6” 3-3” 2” 10.5” 5/8”
- Eliminates need for moldboard shoes. 2040092 6” 3-3” 2” 10.5” 3/4”
- Dome-shaped (no sharp corners to chip), individually spaced 2040123 8” 3-3” 1.5” 10.5” 5/8”
carbide inserts deliver maximum breakage defense. 2040124 8” 3-3” 1.5” 10.5” 3/4”
- End model incorporates KenCast™ tungsten carbide material 2040125 8” 3-3” 2” 10.5” 5/8”
to safeguard the blade end from curb contact, saving you on 2402490 6” 2-8-2” 2” 14.5” 5/8”
replacement inventory and labor — no matter the cast angle of End Blade Savers 3-Bolt Styles
your plow. 2402494 6” 3-3-12-2.25” 2” 22.5” 5/8”
- Available in a wide array of sizes and bolt patterns to fit virtually 2402495 6” 3-3-12-2.25” 1.5” 22.5” 5/8”
all plow and blade designs. 2402485 6” 3-3-12-2.25” 1.5” 22.5” 3/4”
2402489 6” 3-3-12-2.25” 2” 22.5” 3/4”
Drastically reduce downtime by extending blade life! 2457130 8” 3-3-12-2.25” 1.5” 22.5” 5/8”
3556530 5” 3-3-12-2.25” 1.5” 22.5” 5/8”
Center Blade Savers
I.C.E. Center Blade Saver
2038043 6” 3-3-9-3-3” 1.5” 21” 5/8”
2040864 6” 3-3-9-3-3” 2” 21” 5/8”
2035512 6” 3-3-12-3-3” 1.5” 24” 5/8”
2037952 6” 3-3-12-3-3” 2” 24” 5/8”
I.C.E. End Blade Saver
2037951 5” 3-3-12-3-3” 1.5” 24” 5/8”
2038044 6” 3-3-3” 1.5” 9” 5/8”
2038045 8” 3-3-3” 1.5” 9” 5/8”
2038046 6” 3-12-3” 1.5” 18” 5/8”
2042998 8” 3-3-12-3-3” 1.5” 24” 5/8”
NOTE: End blade saver bolt holes countersunk on both sides of blade to facilitate
use as a left-hand or right-hand part. Blade is 1’’- thick on all blade savers.
Now available in a
Installed Blade Savers 3-bolt-hole design for To choose the optimum blade saver for your application, simply match
more secure fastening. blade height, hole spacing, hole size, and gauge to the cutting edge you
need to protect. Blade savers are available in various lengths to enable you
Features I.C.E.-style to safeguard any size area on your main cutting-edge assembly.
inserts to resist breakage.
Custom hole-spacing available.

116 TITAN 2014 / 2015 CATALOGUE

BLADES & EDGES
CUTTING EDGES

Cast Corner Bits for Applications on Caterpillar® Equipment

A
D

Black Cat cast Dozer End Bits are designed Designed with more wear material in Efficient processes and “state of the art”
and built to outperform the competition the critical areas, Black Cat End Bits are foundry practices allow for competitive
using our HighSpec Alloy X14 Steel for engineered to offer maximum wear life while pricing of quality parts. In house
excellent wear characteristics and superior minimizing throw away steel, enhancing the metallurgical staff and testing facilities
impact resistance. The contoured design value for the customer. Machined surfaces ensure quality and consistency in all of
offers an impact rib built into the high wear on larger dozers (D9 and larger) enable our finished products. The results are
area enhancing wear life and improving the superior fit while minimizing installation time Quality Wear Parts that offer excellent
strength of the end bit corner. and effort. Maximum depth countersinking value to the customer every time.
protects the bolt head from premature wear
and failure.

Part Hot Cupped

Number Side Type Equivalent Weight A B C D Holes Bolt Dozer Model - Serial Numbers

D4H - All Models and Serial Numbers

4T5407 RH EWL 140 6787 54 lbs 1.0” 1.85” 10.0” 21.0” 4 0.75” D5H/M/N - All Models and Serial Numbers
4T5408 LH EWL 140 6788 54 lbs 1.0” 1.85” 10.0” 21.0” 4 0.75” D6M/N - All Models and Serial Numbers
D6R PLGP - G6M, 4TP, 4WP
4J8261 RH GD 3G8297 25 lbs .75” 1.67” 9.0” 15.0” 6 0.75” D5BA - 93H3847-UP
D5EA - 6RH
4J8262 LH GD 3G8298 25 lbs .75” 1.67” 9.0” 15.0” 6 0.75” D6D/E/G A - 54U, 44E, 47G, 58G, 18H
5J1419 RH GD 3G8319 32 lbs .87” 1.9” 9.5” 15.0” 6 0.75” D6DS - 21H, 41H
D6D/E/G S - 95E, 17H, 46G, 55G, 63S
5J1420 LH GD 3G8320 32 lbs .87” 1.9” 9.5” 15.0” 6 0.75” D6HA - 1BH0570-UP
6Y4411 RH GD 6Y4411HC 56 lbs .75” 2.45” 12.5” 20.0” 6 0.75” D6R A - 1XP, 3GP, 1ZP, 1YP, 3PP, 4BP, 8TP
6Y4410 LH GD 6Y4410HC 56 lbs .75” 2.45” 12.5” 20.0” 6 0.75” D6R S - 1DH600-UP, 3EP, CLH, 1RP, 3EP, BHN
9W1875 RH EWL 9W1875HC 58 lbs 1.0” 2.0” 11.9” 18.5” 6 0.75” D6H SU - 1CH, 2NH, 4PH, 8AH, 8BH
9W1876 LH EWL 9W1876HC 58 lbs 1.0” 2.0” 11.9” 18.5” 6 0.75” D6R SU - 1TP, 3FP, 1WP, 3RP, 4AP, 8SP, BHM
D7G A - 13F, 22F, 30F, 72F, 13H
D7H/R A - 4EB, 3CC, 4ZC
D7S - 23F, 31F, 59F, 14H
D7G S - 53J, 49K, 60K, 64K, S7G
D7H/R S - 6KB, 8ZB, 4XC, 8NH, J8L, CDC
4J8843 RH GD 3G8315 60 lbs 1.12” 2.28” 12.0” 19.0” 7 0.875” D7H/R SLGP - 6JB, 3GH, 4FG, 4XH, 5GH, 2RP, 8RH, 5SP, 9KP, J4L, CDN
4J8844 LH GD 3G8316 60 lbs 1.12” 2.28” 12.0” 19.0” 7 0.875” D7H/R SU - 4DB, 2FC, 2JH, UP, 8LH, CDT, J6L, BHT
4J8843HD RH 83 lbs 1.12” 3.53” 12.4” 21.2” 7 0.875” D7 U - 42G
4J8844HD LH 83 lbs 1.12” 3.53” 12.4” 21.2” 7 0.875” D7G U - 85D, 61K, 94R
D7 H/R U - 5SB, 9JB, 7AC, 8MH, JIL, CDL
D8 CUSHION - 71F, 77G
D8HA-UPT0 28E1-1125
D8H U - 20F, 29J, 30E, 45K, 48K, 73E

TITAN 2014 / 2015 CATALOGUE 117

Half Arrow Blade Cover Plates

Part Number Description Weight Number Required Model A C E Holes

1U0593TP CTR Cover Plate 60 lbs (3 req.) 960F, 966D,E,F,G,H, 970F, 972G,H 12.59” 1.00” 33.50” 4
100 6668TP CTR Cover Plate 62 lbs (3 req.) 966G,H 970F, 972G,H 12.59” 1.00” 35.38” 4
3G6395TPR RH Cover Plate 13 lbs
(lreq.) 960F, 966D,E,F,G,H 970F, 972G,H 12.59” 1.00” 5.75” 3
3G6395TPL LH Cover Plate 13 lbs
217 4725TP CTR Cover Plate 91 lbs (3 req.) 980C,F 13.37” 1.25” 36.75” 4
217 4727TP CTR Cover Plate 93 lbs (3 req.) 980F,G,H 13.37” 1.25” 37.94” 4
217 4726TPR RHCover Plate 18 lbs
(1 req.) 980C,F,G,H 13.37” 1.25” 6.00” 3
217 4726TPL LH Cover Plate 18 lbs

Half Arrow Segment Cover Plates

Part Number Description Weight Used With Model A C E Holes

113 3140TP CTR Cover Plate 26.0 lbs 113 3140 7.86” 1.25” 11.34” 2
980C,F
113 3141TP/42TP RH/LH Cover Plate 31.0 lbs 113 3141/42 7.86” 1.25” 15.27” 2
195 7180CAST CTR Cover Plater 32.8 lbs 116 7460 or 109 9080 8.24” 1.25” 13.50” 3
988F, G
195 7181/82CAST RH/LH Cover Plate 34.0 lbs 116 7461/62 or 109 9081/82 8.24” 1.25” 16.00” 3
195 7096CAST CTR Cover Plate 40.0 lbs 119 6000 or 275 5460 or 275 5470 9.63” 1.25” 16.00” 4
988F,G, 990, 992D,G
195 7097/98CAST RH/LH Cover Plate 45.0 lbs 275 5461/62 or 275 5471/72 9.63” 1.25” 20.25” 4
264 2096 CTR Cover Plate 40 lbs 264 2090 9.86” 0.94” 18.50” 4
990
264 2097/98 RH/LH Cover Plate 48 lbs 264 2091/92 9.85” 0.94” 22.95” 4
208 5327 CTR Cover Plate 49.0 lbs 119 6000 or 275 5460 or 275 5470 992G 10.25” 1.25” 16.00” 4
208 5328/29 RH/LH Cover Plate 54.0 lbs 275 5461/62 or 275 5471/72 35 High degree Abrasion bevel Buckets 10.20” 1.25” 17.56” 4
195 7230 CTR Cover Plate 84.0 lbs 109 9030 13.06” 1.50” 17.50” 5
994D, F
195 7231/32 RH/LH Cover Plate 92.0 lbs 117 6805/06 13.50” 1.50” 17.10” 5
109 9033TP CTR Cover Plate 122 lbs 109 9033 13.06” 1.50” 24.50” 5
994D, F
109 9031TP/32TP RH/LH Cover Plate 65.0 lbs 109 9031/32 13.75” 1.50” 17.65” 5

TITAN 2014 / 2015 CATALOGUE 121

BLADES & EDGES
CUTTING EDGES

Half Arrow Blades for Applications on John Deere® Equipment

B
A
C
D

Part Number Description Weight Replaces Model A B C D E Holes

T198126HA CTR Blade (3 req.) 283.0 lbs T198126 (3 req.) 16.73 12.07 3.13 1.87 37.56 4
844J
T196455HA End RH or LH (2 req.) 83.0 lbs T196455 (2 req.) 16.73 12.07 3.13 1.87 11.10 3
644H/J 724J - 10.37 6.75 2.37 1.63 31.65 2
T167828HAN CTR Blade (3 req.) 130.0 lbs T167828 (1 req.)
115” Bucket
T171386HANC CTR Blade (1 req.) 137.0 lbs 644H/J 724J - 10.37 6.75 2.37 1.63 33.24 2
T171386 (2 req.)
T171386HAN CTR Intermediate (2 req.) 138.0 lbs 120” Bucket 10.37 6.75 2.37 1.63 33.62 2
T167829HAR End RH (1 req.) 54.0 lbs 644H/J 724J -
T167829 (2 req.) 14.75 11.13 2.37 1.63 9.35 3
T167829HAL End LH (1 req.) 54.0 lbs Both Buckets
T167922HAN CTR Blade (3 req.) 134.7 lbs T167922 744H/J 11.38” 7.75” 2.63” 1.50” 33.19” 2
T156530HANC CTR Blade (1 req.) 147.7 lbs 11.38” 7.75” 2.63” 1.50” 35.76” 2
T153530HANL CTR LH (1 req.) 149.4 lbs T156530 744H/J, 824J 11.38” 7.75” 2.63” 1.50” 36.56” 2
T156530HANR CTR RH (1 req.) 150.5 lbs 11.38” 7.75” 2.63” 1.50” 36.56” 2
AT139622HAL End LH (1 req.) 61.6 lbs 139622 744E/H/J, 824J 15.63” 12.00” 2.88” 1.75” 9.53” 3

122 TITAN 2014 / 2015 CATALOGUE

BLADES & EDGES
CUTTING EDGES

Half Arrow Segments & Blades for Applications on Komatsu® Equipment

B
A
C
D

Cover Plates
Part Number Description Weight Used With Model Width Length Thickness Holes

WA500-3TP CTR Cover Plate (6 req.) 28.0 lbs WA500-3HA 18.38” 7.00” 1.00” 2
WA500-1 S/N 20001+
WA500-3TPL LH Cover Plate (1 req.) 22.0 lbs WA500-3HAL
WA500-3 & 6
WA500-3TPR RH Cover Plate (1 req.) 22.0 lbs WA500-3HAR 12.13” 8.69” 1.00” 3
425-838-A110F Segment Cover Plate 20.0 lbs 425-838-A110H WA500 11.19” 8.66” 1.00” 2
M600TPC CTR Cover Plate 32.0 lbs M600HAC
M600TPL LH Cover Plate 32.4 lbs M600HAL WA600 13.00” 9.13” 1.00” 3
M600TPR RH Cover Plate 32.4 lbs M600HAR

Blades & Segments

Part Number Description Weight Replaces (DBF) Model A B C D E Holes

WA600-HA CTR Blade (3 req.) 287.0 lbs 426-815-A110 (1 req.) 14.00” 9.00” 3.13” 2.0” 40.81” 4
End RH or LH 426-815-A120 (2 req.) WA600-1 & 3
WA600-HAE 98.0 lbs
(2 req.) 426-815-A130 (2 req.) 18.38” 14.00” 3.13” 2.0” 11.06” 4
WA500-3HA CTR Blade (3 req.) 187.0 lbs 425-815-A310(1) / 425-815-A320(2) 11.00” 6.00” 3.13” 2.0” 36.99” 4
WA500-1
WA500-3HAL End LH (1 req.) 82.0 lbs or 16.16” 11.00” 3.13” 2.0” 11.20” 3
S/N 20001+
425-815-A210(2) / 425-815-A320(2) or
WA500-3HAR End RH (1 req.) 82.0 lbs WA500-3 & 6
425-815-2220(1) / 425-815-2210(2) 16.16” 11.00” 3.13” 2.0” 11.20” 3
WA470-HA CTR Blade (3 req.) 116.0 lbs 421-815-A110(1) / 424-815-A110(2) 10.25” 6.00” 2.50” 1.5” 30.68” 4
WA450-2
WA470-HAL End LH (1 req.) 62.0 lbs or 0.25” 6.00” 2.50” 1.5” 16.14” 3
through
421-815-2110(1) / 421-815-1121(2)
WA470-1 & 3
WA470-HAR End RH (1 req.) 62.0 lbs or 10.25” 6.00” 2.50” 1.5” 16.14” 3
WA480-5 & 6
421-815-3210(2) / 421-815-3220(2)
425-838-A110H Segment 64.0 lbs 425-838-A110 WA500 15.25” 8.00” 2.88” 1.8” 11.19” 2
M600HAC CTR Segment (1 req.) 122.2 lbs 426-838-3220 (1 req.) 17.13” 11.00” 3.63” 2.75” 13.00” 3
M600HAL LH Segment (3 req.) 122.0 lbs 426-838-3210 (3 req.) WA600
M600HAR RH Segment (3 req.) 122.0 lbs 426-838-3230 (3 req.) 17.19” 11.00” 3.63” 2.75” 13.00” 3

TITAN 2014 / 2015 CATALOGUE 123

BLADES & EDGES
CUTTING EDGES

Half Arrow Blades for Applications on Volvo® Equipment

B
A
C
D

Cover Plates
Part Number Description Weight Replaces Model Width Length Thickness Holes

L180HATP CTR Cover Plate (6 req.) 26.0 lbs L180HA L150 - GP, LM 7.35” 16.25” 1.00” 2
L180HATPR RH Cover Plate 23.0 lbs L180HAL L180 - GP, LM 11.48” 9.50” 1.00” 3
L180HATPL LH Cover Plate 23.0 lbs L180HAR L220 - LM 11.48” 9.50” 1.00” 3

Blades & Segments

Part Number Description Weight Replaces Model A B C D E Holes

L220HA CTR Blade (3 req.) 208.0 lbs L150 - LM 12.75” 8.00” 3.13” 1.88” 34.95” 5
1111-1776 (1req.)
L220HAL End LH (1 req.) 110.0 lbs L180 - GP, LM 16.69” 12.00” 3.13” 1.88” 14.44” 3
1111-1775 (2 req.)
L220HAR End RH (1 req.) 110.0 lbs L220 - GP 16.69” 12.00” 3.13” 1.88” 14.44” 3
L180HA CTR Blade (3 req.) 145.0 lbs L150 - GP, LM 11.25” 6.50” 3.00” 1.50” 32.74” 4
1108-2666 (1 req.)
L180HAL End LH (1 req.) 77.0 lbs L180 - GP, LM 15.19” 10.44” 3.00” 1.50” 13.63” 3
1108-2664 (2 req.)
L180HAR End RH (1 req.) 77.0 lbs L220 - LM 15.19” 10.44” 3.00” 1.50” 13.63” 3
L150HAC CTR Blade (1 req.) 102.0 lbs 10.50” 6.50” 3.00” 1.50” 24.75” 3
1108-1068 (1 req.) L150 - GP, LM, HT
L150HA Intermediate Ctr. (2 req.) 147.0 lbs 10.50” 6.50” 3.00” 1.50” 35.75” 6
1108-1069 (2 req.) L180 - GP, LM, HT
L150HAE End RH or LH (2 req.) 80.0 lbs 14.44” 10.44” 3.00” 1.50” 14.75” 4
1108-2443 or
1108-2617 Segment Half Arrow 99.0 lbs L330C 16.50” 10.25” 4.49” 2.00” 13.38” 3
1111-1134
1111-1761HA Segment Half Arrow 63.0 lbs 1111-1761 L220, 180, 150 13.75” 7.25” 2.88” 1.75” 13.00” 3

124 TITAN 2014 / 2015 CATALOGUE

BLADES & EDGES
HARDWARE

Cutting Edge Hardware

Plow Bolts
Diameter Bolt Length Part Number Description Caterpillar® Reference Thread Grip Length Box Quantity Weight / 100

1 1/2” GR8 5/8X11/2 Grade 8 Plow Bolt 4F3664 11-UNC 0.69 200 16.0 lbs
1 3/4” GR8 5/8X13/4 Grade 8 Plow Bolt 4F3653 11-UNC 0.69 200 18.0 lbs
2” GR8 5/8X2 Grade 8 Plow Bolt 4F3654 11-UNC 0.69 175 20.0 lbs
2 1/4” GR8 5/8X21/4 Grade 8 Plow Bolt 3F5108 11-UNC 1.00 150 21.0 lbs
2 1/2” GR8 5/8X21/2 Grade 8 Plow Bolt 4F3656 11-UNC 1.00 125 24.0 lbs
5/8” 2 3/4” GR8 5/8X23/4 Grade 8 Plow Bolt 4F3657 11-UNC 1.25 120 27.0 lbs
3” GR8 5/8X3 Grade 8 Plow Bolt 4F3658 11-UNC 1.50 100 29.0 lbs
3 1/2” GR8 5/8X31/2 Grade 8 Plow Bolt 4F3665 11-UNC 2.00 85 33.0 lbs
4” GR8 5/8X4 Grade 8 Plow Bolt 4F3671 11-UNC 2.50 70 37.0 lbs
4 1/2” GR8 5/8X41/2 Grade 8 Plow Bolt 11-UNC 2.50 60 41.0 lbs
5” GR8 5/8X5 Grade 8 Plow Bolt 11-UNC 3.00 60 45.0 lbs
2” GR8 3/4X2 Grade 8 Plow Bolt 4F3672 10-UNC 0.81 115 29.0 lbs
2 1/4” GR8 3/4X21/4 Grade 8 Plow Bolt 4F7827 10-UNC 0.81 100 32.0 lbs
2 1/2” GR8 3/4X21/2 Grade 8 Plow Bolt 5J4773 10-UNC 1.13 90 34.0 lbs
2 3/4” GR8 3/4X23/4 Grade 8 Plow Bolt 5J4771 10-UNC 1.25 80 38.0 lbs
3/4” 3” GR8 3/4X3 Grade 8 Plow Bolt 4F0138 10-UNC 1.25 80 41.0 lbs
3 1/4” GR8 3/4X31/4 Grade 8 Plow Bolt 1J6762 10-UNC 1.50 70 44.0 lbs
3 1/2” GR8 3/4X31/2 Grade 8 Plow Bolt 10-UNC 1.75 70 47.0 lbs
3 3/4” GR8 3/4X33/4 Grade 8 Plow Bolt 5F8933 10-UNC 2.00 60 50.0 lbs
4” GR8 3/4X4 Grade 8 Plow Bolt 10-UNC 2.25 55 54.0 lbs
4 1/2” GR8 3/4X41/2 Grade 8 Plow Bolt 4F0253 10-UNC 2.75 40 60.0 lbs
2 1/2” GR8 7/8X21/2 Grade 8 Plow Bolt 5J4772 9-UNC 1.25 65 48.0 lbs
2 3/4” GR8 7/8X23/4 Grade 8 Plow Bolt 6F0196 9-UNC 1.25 60 52.0 lbs
3” GR8 7/8X3 Grade 8 Plow Bolt 5J2409 9-UNC 1.25 55 55.0 lbs
7/8” 3 1/4” GR8 7/8X31/4 Grade 8 Plow Bolt 8J2935 9-UNC 1.50 50 60.0 lbs
3 1/2” GR8 7/8X31/2 Grade 8 Plow Bolt 2J2548 9-UNC 1.75 45 65.0 lbs
4” GR8 7/8X4 Grade 8 Plow Bolt 9-UNC 2.25 45 74.0 lbs
5” GR8 7/8X5 Grade 8 Plow Bolt 9-UNC 3.00 35 90.0 lbs
2 1/2” GR8 1X21/2 Grade 8 Plow Bolt 3J2801 8-UNC 1.06 50 59.0 lbs
2 3/4” GR8 1X23/4 Grade 8 Plow Bolt 1J5607 8-UNC 1.50 45 70.0 lbs
3” GR8 1X3 Grade 8 Plow Bolt 4F4042 8-UNC 1.50 40 77.0 lbs
3 1/4” GR8 1X31/4 Grade 8 Plow Bolt 4J9058 8-UNC 1.75 40 82.0 lbs
1” 3 1/2” GR8 1X31/2 Grade 8 Plow Bolt 4J9208 8-UNC 2.00 35 88.0 lbs
3 3/4” GR8 1X33/4 Grade 8 Plow Bolt 1J4948 8-UNC 2.25 30 92.0 lbs
4” GR8 1X4 Grade 8 Plow Bolt 5P8136 8-UNC 2.25 30 97.0 lbs
4 1/2” GR8 1X41/2 Grade 8 Plow Bolt 1J3527 8-UNC 2.25 25 108.0 lbs
5 1/2” GR8 1X51/2 Grade 8 Plow Bolt 8-UNC 3.50 20 129.0 lbs
6” GR8 1X6 Grade 8 Plow Bolt 8-UNC 4.00 25 141.0 lbs
3 3/4” GR8 11/4X33/4 Grade 8 Plow Bolt 6V6535 7-UNC 2.25 15 156.0 lbs
4” GR8 11/4X4 Grade 8 Plow Bolt 7-UNC 2.25 15 163.0 lbs
4 1/8” GR8 11/4X41/8 Grade 8 Plow Bolt 5P8823 7-UNC 2.25 15 166.0 lbs
1 1/4” 4 1/2” GR8 11/4X41/2 Grade 8 Plow Bolt 6V8360 7-UNC 2.25 15 178.0 lbs
5” GR8 11/4X5 Grade 8 Plow Bolt 5P8361 7-UNC 2.25 15 192.0 lbs
5 1/2” GR8 11/4X51/2 Grade 8 Plow Bolt 1981092 7-UNC 2.25 15 208.0 lbs
6” GR8 11/4X6 Grade 8 Plow Bolt 7-UNC 2.25 15 222.0 lbs
4 1/2” GR8 13/8X41/2 Grade 8 Plow Bolt 6-UNC 2.30 10 225.0 lbs
1 3/8” 5 1/2” GR8 13/8X51/2 Grade 8 Plow Bolt 6-UNC 3.30 10 265.0 lbs
6” GR8 13/8X6 Grade 8 Plow Bolt 6-UNC 3.80 10 285.0 lbs

TITAN 2014 / 2015 CATALOGUE 125

BLADES & EDGES
HARDWARE

Cutting Edge Hardware

Hex Plow Bolts
Part Number Description Caterpillar® Reference Bolt Diameter Thread Height Accross Flats Box Quantity Ship Weight

GR8 3/4NC Grade 8 2J3506 3/4” 10-UNC 41/64” 1 1/8” 250 11.5 lbs
GR8 5/8HNC Grade 8 Heavy Duty 5/8” 11-UNC 39/64” 1 1/16” 325 11.9 lbs
GR8 5/8NC Grade 8 4K0367 5/8” 11-UNC 35/64” 15/16” 400 7.1 lbs
GR8 7/8NC Grade 8 2J3505 7/8” 9-UNC 3/4” 1 5/16” 150 18.1 lbs
GR8 1CNC Grade 8 Conical Hex 8J2933 1” 8-UNC 55/64” 1 1/2” 100 29.1 lbs
GR8 1NC Grade 8 2J3507 1” 8-UNC 55/64” 1 1/2” 100 26.7 lbs
GR8 11/4CNC Grade 8 Conical Hex 5P8362 1 1/4” 7-UNC 1 1/16” 1 7/8” 50 50.3 lbs
GR8 11/4NC Grade 8 3K9770 1 1/4” 7-UNC 1 1/16” 1 7/8” 50 52.5 lbs
GR8 13/8NC Grade 8 302419 1 3/8” 6-UNC 1 11/64” 2 3/16” 35 87.0 lbs

Hardened Washers
Part Number Caterpillar® Reference Bolt Diameter Inside Diameter Outside Diameter Thickness Box Quantity Weight / 100

GR8 5/8W 5P8247 5/8” 21/32” 1 5/16” 5/32” 100 4.65 lbs
GR8 3/4W 5P8248 3/4” 13/16” 1 31/64” 5/32” 50 5.38 lbs
GR8 7/8W 5P8249 7/8” 15/16” 1 3/4” 5/32” 50 7.83 lbs
GR8 1W 5P8250 1” 1 9/64” 2 1/64” 5/32” 50 9.26 lbs
GR8 11/4W 4K0684 1 1/4” 1 5/16” 2 1/4” 1/4” 25 18.63 lbs
GR8 13/8W 465941 1 3/8” 1 15/32” 2 9/16” 5/16” 25 22.49 lbs

Reducer Bolts
DiameterBolt Length Part Number Description Caterpillar®Reference Thread Grip Length Box Quantity Weight / 100

5/8” 2 1/4” GR8 5/8X21/4SP 3/4” Square Head 11-UNC 0.77 125 26.0 lbs
2 3/4” GR8 5/8X23/4SP 3/4” Square Head 11-UNC 0.77 100 31.0 lbs

Reducer Bushing
Part Number Height Inside Diameter Outside Diameter Head Diameter Box Quantity Weight / 100

GR8 3/4-5/8 0.8” 11/16” 0.8” 1 1/4” 100 8.2 lbs

Recommended Tightning Torque Values

Thread Diameter (in) 5/8” 3/4” 7/8” 1” 1 1/4” 3/8”

UNC Torque ([Link]) 200 ± 30 350 ± 45 550 ± 65 850 ± 110 1700 ± 220 2250 ± 220
UNC Torque (Nm) 270 ± 40 475 ± 60 750 ± 90 1150 ± 150 2300 ± 300 3050 ± 300

126 TITAN 2014 / 2015 CATALOGUE

BLADES & EDGES
CONICAL BITS

Road Razor RZ08

Features: RS16
- Heavy body, pullergroove design. 1156102
- Heavy collar for block protection. - for hard to medium
- Dimpled retainer for holding power. concrete conditions
RS14 - use on medium to high
1156160 horsepower machines
- for medium to soft
asphalt conditions
- use on low to high RS18
horsepower machines 1107032
- for soft to medium
asphalt conditions
- use on low to medium
horsepower machines

Legacy Heavy-Body Series

Features:
- Heavy body, pullergroove design.
- Heavy collar for block protection.
- For hard to soft asphalt, and asphalt off
concrete conditions.
- Use on low to high horsepower Packaging Information
machines. TOOL CONTAINER WEIGHT PALLET WEIGHT PIECES PER
NAME CODE TYPE A* LBS. KG. LBS. KG. B** PALLET
M3
1317446 C3KBF 1010862 bucket 50 31.0 14.06 1580.0 716.7 50 2500
RS12 1010865 bucket 50 31.0 14.06 1580.0 716.7 50 2500
RS19 1991004 bucket 50 32.0 14.51 1630.0 739.4 50 2500
RS14 1156160 bucket 50 31.5 14.28 1604.6 727.8 50 2500
RS16 1156102 bucket 50 31.0 14.06 1580.0 716.7 50 2500
RS18 1107032 bucket 50 31.0 14.06 1580.0 716.7 50 2500
M3 1317446 box 70 47.5 21.55 1740.0 789.3 36 2520
* A = Pieces per Container ** B = Containers per Pallet

130 TITAN 2014 / 2015 CATALOGUE

BLADES & EDGES
CONICAL BITS

Weld-On Series Blocks For .76” (20 mm) Shank Tools

C10AMC Block C10LG Block C10AM/LG Base
1012285 1012345 1012364

C10 Block C10HD Block C10H Block

1012278 1012289 1012280

Quick-Change Series Blocks For .76” (20 mm) Shank Tools

Taper-locking mechanism enables quick and easy changeouts!
QC100 Base QC110HD Block QC110B Base
1011565 1013348 1012283
- for machines more than 400 horsepower - for machines more than 400 horsepower - for machines less than 400 horsepower

Bolt retention has been improved to

prevent bolt loss.

Packaging Information
TOOL CONTAINER WEIGHT PALLET WEIGHT PIECES PER
QC110H Holder NAME CODE TYPE A* LBS. KG. LBS. KG. B** PALLET
1012284
- for machines less than 400 horsepower C10AMC block 1012285 bucket 20 33.0 15.0 1700 772.7 50 100
C10AM/LG base 1012364 bucket 20 38.0 17.2 1925 875 50 1000
C10HD block 1012289 bucket 25 29.5 13.4 1525 693.2 50 1250
C10LG block 1012345 bucket 25 31.0 14 1575 715 50 750
C10 block 1012278 bucket 35 33.2 15.1 1710 777.3 50 1750
C10H block 1012280 bucket 35 33.2 15.1 1710 777.3 50 1750
QC100 Base 1011565 bucket 8 31.5 14.28 1604.0 727.6 50 400
QC110B Base 1012283 bucket 10 28.7 13.02 1465.0 664.5 50 500
QC110HD Block 1013348 bucket 10 29.2 13.24 1490.0 675.9 50 500
QC110H Holder 1012284 bucket 15 28.6 12.96 1458.5 661.6 50 t750
* A = Pieces per Container ** B = Containers per Pallet

TITAN 2014 / 2015 CATALOGUE 131

BLADES & EDGES
CONICAL BITS

Cutting Tools and Blocks

RS18 RS20 C3KBF
1107032 80101626 1010862
For drilling in For drilling in hard For all types of
soft to medium rock and concrete, asphalt and
conditions. excellent impact abrasive material.
Sharp tip for strength. Wide tip has high
improved fracture resistance.
penetration.

RP21 RL11 RL06

1825565 1010772 1010830
For high-impact For cutting soft For soft to
and abrasive to medium-hard medium-hard
applications. Deep materials with cutting conditions.
recessed carbide good penetration. Long retainer for
provides long Dimpled retainer better block bore
wear life. Washer for increased protection.
provides block holding power in
face protection and grooved blocks.
improves rotation.
Full sleeve retainer
protects entire bore

RL10 RL07 RL09

1010784 1010782 1010770
For drilling concrete and For drilling For cutting in
rock cutting. Double- concrete and abrasive conditions.
angle rock cutting. Dimpled retainer
tip provides maximum Long retainer for provides increased
impact strength. better block bore holding power in
protection. grooved blocks.

RL08 C10HD block C10 block

1010767 1012289 1012278
For cutting Extra-heavy-duty design. Has a narrower face than the C10H style.
in abrasive Accepts all .76“ series Accepts all .76“ series tools. All blocks are
conditions. tools. All blocks are easily welded with a
Long retainer for easily welded with 7018 or 8018
better block bore a 7018 or 8018 lowhydrogen
protection. low-hydrogen rod or equivalent
rod or equivalent wire.
wire.

132 TITAN 2014 / 2015 CATALOGUE

BLADES & EDGES
CONICAL BITS

Cutting Tools and Blocks

C10AM/LG base Packaging Information
packaging
1012364 old tool pieces per containers pieces stock
Used with C10AMC block. tool name code type container per pallet container weight per pallet pallet weight status

All blocks are easily lbs. (kg.) lbs. (kg.)

welded with a 7018 or RS18 C3BFSR 1107032 bucket 50 50 31.00 14.09 2500 1600.06 727.30 stock
8018 low-hydrogen rod RL11 C1 1010772 bucket 75 50 34.74 15.79 3750 1787.06 812.30 stock
or equivalent wire. RL06 C1LR 1010830 bucket 75 50 37.05 16.84 3750 1902.56 864.80 stock
RL10 C1HDSR 1010784 bucket 75 50 39.36 17.89 3750 2018.06 917.30 stock
RL07 C1HDLR 1010782 bucket 70 50 38.19 17.36 3500 1959.76 890.80 stock
RL09 C3SR94 1010770 bucket 75 50 34.00 15.45 3750 1750.00 795.50 stock
RL08 C3LR 1010767 bucket 75 50 37.00 16.82 3750 1900.00 863.60 stock
RS20 1010974 bucket 50 50 30.00 13.64 1550 704.50 2500.00 stock
C3KBF 1010862 bucket 50 50 31.00 14.09 2500 1600.06 727.30 stock
RP21 1781713 box 50 54 36.06 16.39 2700 1853.06 842.30 stock

blocks

C10HD 1012289 bucket 25 50 30.89 14.04 1250 1594.56 724.80 stock

C10 1012278 bucket 35 50 33.19 15.09 1750 1709.51 777.05 stock
C10AM/LGbase 1012364 bucket 30 50 55.53 25.24 1500 2826.56 1284.80 stock

SM06 SM02 SM01

1010815 1010817 1010860
For drilling hard For asphalt For asphalt or
rock or concrete. or abrasive abrasive cutting
Double-angle tip for applications. conditions with
maximum impact Sharp tip for moderate impact.
strength. improved
penetration.

SL02 SL04
1010797 1010795
For asphalt For drilling
or abrasive hard rock or
applications. concrete.
Sharp tip for Double-angle
improved tip for maximum
penetration. impact strength.

TITAN 2014 / 2015 CATALOGUE 133

BLADES & EDGES
CONICAL BITS

Cutting Tools and Blocks

C87KCSBSR C87DSSR C87G block
1010937 1010935 1012234
Used with Kenclaw Used with Kenclaw Heavy-duty design with machined step
drilling system. Large- drilling system. Sharper for non-rotating tools. Has a .875“-diameter
diameter carbide tip bullet profile provides bore. Accepts .86“ series cutting tools.
provides maximum increased penetration All blocks are
abrasion resistance. in medium to hard easily welded
Large nose radius is rock. with a 7018
well suited for impact. or 8018 low-
hydrogen rod
or equivalent
wire.

C87B block Carbide-edged AR150 87 or

1012275 all-hardened-steel AR150 87ST AR150 87
Has a machined step to accept For asphalt and other soft to medium- 1012240
AR150 87 tools. All blocks are easily hard abrasive conditions. Available cutting
welded with faces: carbide-edged or all-hardened-steel.
a 7018 or Carbideedged tool has a 1.50“ cutting face
8018 low- width for added block protection. Swept-back AR150 87ST
hydrogen carbide edge provides exceptional tool life. 1012241
rod or Non-rotating, not self-sharpening. Requires an
equivalent LR87 retainer, which is supplied with the tool.
wire.

Packaging Information
packaging
old tool pieces containers pieces stock
tool name code type container per pallet container weight per pallet pallet weight status
lbs. (kg.) lbs. (kg.)

SM06 C87BF 1010815 bucket 50 50 34.52 15.69 2500 1776.06 807.30 stock
SM01 C387KBF 1010860 bucket 50 50 33.97 15.44 2500 1748.56 794.80 stock
SM02 C387BF 1010817 bucket 50 50 33.97 15.44 2500 1748.56 794.80 stock
SL02 C387LR 1010797 bucket 70 50 38.80 17.64 3500 1990.00 904.50 stock
SL04 C87LR 1010795 bucket 60 50 37.00 16.82 3000 1900.00 863.60 stock
C87KCSBSR 1010937 bucket 50 50 41.78 18.99 2500 2139.06 972.30 stock
C87DSSR 1010935 bucket 50 50 39.58 17.99 2500 2029.06 922.30 stock
AR150-87 1012240 bucket 40 50 37.95 17.25 2000 1947.66 885.30 stock
AR150-87ST 1012241 bucket 40 50 35.49 16.13 2000 1824.46 829.30 stock

blocks

C87B 1012275 bucket 25 50 22.81 10.37 1250 1190.31 541.05 stock

C87G 1012234 bucket 35 50 32.57 14.81 1750 1678.71 763.05 stock

134 TITAN 2014 / 2015 CATALOGUE

BLADES & EDGES
CONICAL BITS

Cutting Tools and Blocks

C32 C31 C31HD
1010296 1010304 1010787
For drilling For drilling in Heavy-duty
most soils soft to hard rock design for
and broken and concrete. drilling and
or laminated Slender nose tunnel boring
rock. Sharp profile for in extremely
nose profile increased hard rock and
for maximum penetration. concrete.
penetration.

U40HD AUC40KH CH31SR

1010414 1010396 1010960
For augering tunnel For augering in soft For drilling in to
boring in extremely to mediumhard medium-hard cutting
hard rock and cutting conditions conditions. Large cap
concrete. Ballistic- where abrasive tip design provides
style tip provides cutting washes maximum abrasion
high impact strength. away steel. resistance.

C30 block C30H/U40H block

1012279 1011585
Accepts our C31, C31HD, C32, Heavy-duty design. Accepts all
U40HD, AUC40KH, and CH31SR, 1“-shank cutting tools. All blocks are
C31FSRHD, and C34FSR cutting easily welded with a 7018 or 8018
tools. All blocks are easily welded low-hydrogen rod or equivalent
with a 7018 or 8018 low-hydrogen wire.
rod or equivalent wire.

Packaging Information
packaging
type of pieces per containers pieces stock
tool name code flange type container per pallet container weight per pallet pallet weight status
lbs. (kg.) lbs. (kg.)

C31FSRHD 1939780 medium bucket 25 50 24.73 11.24 1250 1286.56 584.80 stock
C34FSR 1939793 medium bucket 25 50 30.21 13.73 1000 1560.49 709.30 stock
C31RHD 1010806 medium bucket 15 50 23.22 10.56 750 1211.21 550.55 stock
C35R 1094018 medium bucket 15 50 26.06 11.85 750 1353.11 615.05 stock
C34R 1010799 medium bucket 15 50 26.06 11.85 750 1353.11 615.05 stock
C31 1010304 small bucket 25 50 27.53 12.52 1250 1426.81 648.55 stock
C31HD 1010787 small bucket 25 50 27.70 12.59 1250 1435.06 652.30 stock
U40HD 1010414 small bucket 25 50 35.18 15.99 1250 1809.06 822.30 stock
AUC40KH 1010396 small bucket 25 50 27.31 12.42 1250 1415.81 643.55 stock
C32 1010296 small bucket 25 50 28.08 12.77 1250 1454.31 661.05 stock
CH31SR 1010960 small bucket 25 50 35.84 16.29 1250 1842.06 837.30 stock

blocks
C30H/U40H 1011585 bucket 8 50 33.36 15.16 400 1717.98 780.90 stock
C30 1012279 bucket 12 50 30.22 13.74 600 1561.34 709.70 stock

TITAN 2014 / 2015 CATALOGUE 135

BLADES & EDGES
CONICAL BITS

Cutting Tools and Blocks

3.5” (89 mm) Gage TS2 TS4
1317521 1730578
High-penetration Penetration tool
tool for soft cutting for medium cutting
conditions. conditions.

TS8 TS11
1318426 1532879
For extremely hard For cutting the
cutting conditions. most extreme hard
rock and concrete.

TS20 TS21
1848809 1864144
High-penetration tool For medium-hard
for soft to medium to highly abrasive
abrasive cutting cutting conditions.
conditions.

TS26
2416845
For hard, non-
abrasive cutting
conditions.

C4/U43H* Block U43XHD-50** Block TH3S* Block

1011578 2988596 2603270
For medium-duty Extra heavy-duty, Heavy-duty barrel
applications. terrain levelers and short base for
and large track bolt clearance on
trenchers. chains.

Packaging Information
TH3* Block WEIGHT PALLET WEIGHT
TOOL CONTAINER PIECES PER
2433922 NAME CODE TYPE A* B LBS. KG. PALLET LBS. KG.
Heavy-duty barrel
TS2 1317521 box 14 36 36.0 16.3 504 1295 587
for maximum
TS4 1730578 box 14 36 42.8 19.4 504 1542 699
strength
TS8 1318426 box 12 36 37.3 16.9 432 1344 609
and rigidity.
TS11 1532879 box 12 36 37.0 16.8 432 1331 603
TS20 1848809 box 14 36 32.8 14.9 504 1179 535
TS21 1864144 bucket 8 50 26.2 11.9 400 1312 595
* Can be used with all step shank tools.
** Can only be used with TS series tools. Not compatible with TS26 2416845 box 12 36 37.9 17.2 432 1364 619
TSC series.
C4/U43H 1011578 bucket 8 50 29.4 13.4 400 1521 691
U43XHD-50 2988596 bucket 6 50 42.0 19.0 300 2100 952
TH3S 2603270 bucket 6 50 25.4 11.5 300 1272 577
TH3 2433922 bucket 6 50 26.6 12.1 300 1330 603
* A = Pieces per Container ** B = Containers per Pallet

136 TITAN 2014 / 2015 CATALOGUE

BLADES & EDGES
CONICAL BITS

Cutting Tools and Blocks

3.0” (76 mm) Gage TS3 TS7
1730577 1317517
Penetration tool For extremely hard
for medium cutting cutting conditions.
conditions.

TS10 TS15
1610156 1730589
For cutting the most For medium and
extreme hard rock abrasive cutting
and concrete. conditions.

TS17 TS18
1723623 1317523
For medium-hard For medium to
and abrasive cutting hard and highly-
conditions. abrasive cutting
conditions.

TS19 TS25
1750422 2416847
For abrasive or soft For hard, non-
to medium-impact abrasive cutting
cutting conditions. conditions.

TS30 TS31
2458404 2602450
For medium to For medium rock
extremely-hard and abrasive
rock, and abrasive conditions.
conditions.

TS32
2602451
For medium to
Packaging Information hard rock
WEIGHT PALLET WEIGHT
TOOL CONTAINER PIECES PER and abrasive
NAME CODE TYPE A* B LBS. KG. PALLET LBS. KG.

TS3 1730577 box 15 36 41.4 18.8 540 1490 676

TS7 1317517 box 14 36 37.3 16.9 504 1342 609
TS10 1610156 box 14 36 42.6 19.3 504 1532 695
TS15 1730589 box 14 36 41.7 18.9 504 1502 681
TS17 1723623 box 14 36 40.0 18.2 504 1441 654
TS18 1317523 box 14 36 41.7 18.9 504 1502 681
TS19 1750422 box 15 36 42.3 19.2 540 1523 691
TS25 2416847 box 12 36 34.8 15.8 432 1253 568
TS30 2458404 box 14 36 40.9 18.5 504 1472 667
TS31 2602450 box 15 36 42.3 19.2 540 1523 691
TS32 2602451 box 15 36 43.0 19.5 540 1548 702
* A = Pieces per Container ** B = Containers per Pallet

TITAN 2014 / 2015 CATALOGUE 137

BLADES & EDGES
CONICAL BITS

Cutting Tools and Blocks

T-Series – 3.0” (76 mm) Gage T6 T7
1730568 1531753
For soft to medium For medium or
cutting conditions. abrasive cutting
conditions.

T12 T14
1254778 1886432
For cutting extremely For soft cutting
hard rock and conditions.
concrete.

C30H/U40H Block TH3-100 Block

1011585 2956994
Heavy-duty design. Extra heavy-duty
design.

TR1 retainer
supplied.

TH3 Block — Heavy-duty

barrel for maximum strength
and rigidity!
- front to back parting lines provide
maximum strength and minimal drag
Packaging Information
- increased weld strength and stability on
TOOL CONTAINER WEIGHT PIECES PER PALLET WEIGHT
wheels or drums NAME CODE TYPE A* B LBS. KG. PALLET LBS. KG.
- maximize your productivity and
profitability T6 1730568 box 18 36 40.3 18.3 648 1452 658
T7 1531753 box 18 36 41.4 18.8 648 1490 676
T12 1254778 box 18 36 41.8 18.9 648 1503 682
T14 1886432 bucket 12 50 22.6 10.2 600 1128 512
C30H/U40H 1011585 bucket 8 50 33.4 15.2 400 1718 781
TH3-100 2956994 bucket 6 50 29.5 13.4 300 1475 669
* A = Pieces per Container ** B = Containers per Pallet

138 TITAN 2014 / 2015 CATALOGUE

BLADES & EDGES
CONICAL BITS

Cutting Tools and Blocks

T-Series – 2.5” (64 mm) Gage T1 T5
1317509 1317507
For cutting For cutting
soft rock. medium rock.

T8 T9
1317512 1730571
For medium and For mediumhard
abrasive cutting and highly
conditions. abrasive cutting
conditions.

T11 T15*
1317501 1984417
For cutting extremely For abrasive
hard rock and cutting conditions.
concrete. * non-stock

TR1 retainer TR1 retainer

supplied. supplied.

TR1 retainer
supplied.

C30H/U40H Block TH3-100 Block

1011585 2956994
Heavy-duty design. Extra heavy-duty
design.

Packaging Information
TOOL CONTAINER WEIGHT PIECES PER PALLET WEIGHT
NAME CODE TYPE A* B LBS. KG. PALLET LBS. KG.

T1 1317509 box 18 36 33.8 15.3 648 1218 553

T5 1317507 box 18 36 36.4 16.5 648 1309 594
T8 1317512 box 18 36 37.4 17.0 648 1346 611
T9 1730571 box 18 36 38.2 17.3 648 1374 623
T11 1317501 box 18 36 38.9 17.6 648 1400 635
T15 1984417 bucket 12 50 24.1 11.93 600 1253 569
C30H/U40H 1011585 bucket 8 50 33.4 15.2 400 1718 781
TH3-100 2956994 bucket 6 50 29.5 13.4 300 1475 689
* A = Pieces per Container ** B = Containers per Pallet

TITAN 2014 / 2015 CATALOGUE 139

TEETH & ADAPTERS
BUCKET TEETH

Teeth and Adapters

Standard Standard Offset HDuty Penetration Penetration HD HD Abrasion Tiger VX Twin Flare Rock Weld-On
Short Long Long Long Plus Penetration Penetration Tiger Tooth Chisel Adapter Nose

J Series Teeth
J200 J225 J250 J300 J350 J400
Tooth Style Part # Weight Part # Weight Part # Weight Part # Weight Part # Weight Part # Weight

Standard Short 1U3201 2.7 lbs 6Y6221 3.9 lbs 1U3251 5.6 lbs 1U3301 9.0 lbs 1U3351 12.8 lbs 7T3401 18.9 lbs
Standard Long 1U3202 2.8 lbs 6Y3222 4.5 lbs 1U3252 6.2 lbs 1U3302 9.7 lbs 1U3352 12.9 lbs 7T3402 20.8 lbs
Offset Long J250L 7.1 lbs J300L 11.0 lbs J350L 14.6 lbs J400L 22.5 lbs
Heavy Duty Long 8E4222 5.8 lbs 9N4252 7.7 lbs 9N4302 12.9 lbs 9N4352 17.6 lbs 8E4402 25.4 lbs
Penetration 1U3209 2.4 lbs 6Y8229 4.6 lbs 9J4259 6.4 lbs 9J4309 9.0 lbs 9J4359 12.7 lbs 6Y7409 20.3 lbs
Penetration Plus J250PP 10.2 lbs 183 5300 12.4 lbs 168 1359 16.0 lbs 168 1409 26.0 lbs
Heavy Duty Penetration J250HP 15.7 lbs 135 9300 18.6 lbs 144 1358 25.9 lbs 135 9400 32.8 lbs
Heavy Duty Abrasion J225HDAL 6.6 lbs J250HDAL 9.6 lbs J300HDAL 16.2 lbs J350HDAL 22.5 lbs J400HDAL 31.8 lbs
Tiger J200 Tiger 3.2 lbs J225 Tiger 4.7 lbs J250 Tiger 6.3 lbs J300 Tiger 10.3 lbs J350 Tiger 14.3 lbs J400 Tiger 23.0 lbs
VX Penetration
Twin Tiger J200 Twin 3.7 lbs J225 Twin 5.0 lbs J250 Twin 6.1 lbs J300 Twin 12.3 lbs J350 Twin 15.7 lbs J400 Twin 26.2 lbs
Twin Tiger Narrow J350TTD 14.8 lbs
Flare Tooth 109 9200 3.5 lbs 186 3010 6.6 lbs 208 5254 8.8 lbs 107 3300 13.2 lbs 107 3350 19.8 lbs 107 3400 28.1 lbs
Rock Chisel J300RC 13.0 lbs J350RC 17.9 lbs J400RC 26.2 lbs
Weld-On Adapter Nose J200WN 2.1 lbs J225WN 3.8 lbs J250WN 5.0 lbs J300WN 7.4 lbs J350WN 10.2 lbs J400WN 15.0 lbs
Pins & Retainers Pin Retainer Pin Retainer Pin Retainer Pin Retainer Pin Retainer Pin Retainer
Standard Groove Pin 9W7112 4T0001 6Y3228 3G9609 9J2258 3G9609 9J2308 3G9609 9J2358 3G9549 7T3408 7T3409
Radius Groove Pin 8E6208 8E6209 8E6259 8E6258 8E6259 107 3308 8E6259 8E6358 8E6359 8E8409
Heavy Duty Pin 132 4762 149 5733 132 4763 149 5733 132 4766 149 5733 114 0358 114 0359 116 7408 116 7409

J450 J550 J600 J700 J800

Tooth Style Part # Weight Part # Weight Part # Weight Part # Weight Part # Weight

Standard Short 9W8451 23.6 lbs 9W8551 32.8 lbs

Standard Long 9W8452 25.6 lbs 9W8552 40.8 lbs 6I6602 77.3 lbs 4T4702 97.3 lbs
Offset Long J450L 29.3 lbs
Heavy Duty Long 9N4452 35.9 lbs 9N4552 59.9 lbs 7Y0602 101 lbs
Penetration 9W8459 21.8 lbs 9W8559 35.3 lbs 7I7609 61.7 lbs
Penetration Plus 159 0459 33.3 lbs 159 0559 53.2 lbs 159 0607 84.9 lbs 171 1709 110.1 lbs
Heavy Duty Penetration 138 6451 45.2 lbs 138 6552 68.1 lbs 135 9600 130 lbs 135 9700 147.9 lbs 135 9800 202.4 lbs
Heavy Duty Abrasion J450HDAL 48.9 lbs J550HDAL 73.9 lbs J600HDAL 130 lbs J700HDAL 154.2 lbs J800HDAL 206.6 lbs
Tiger J450 Tiger 29.4 lbs J550 Tiger 35.9 lbs J600 Tiger 78.6 lbs
VX Penetration J600VX 75.4 lbs J700VX 87.7 lbs J800VX 124.9 lbs
Twin Tiger J450 Twin 31.6 lbs J550 Twin 41.1 lbs J600 Twin 85.1 lbs
Twin Tiger Narrow J450 TTD 32.0 lbs
Flare Tooth 107 3450 36.4 lbs 107 3550 58.3 lbs
Rock Chisel J450RC 31.4 lbs J550RC 49.7 lbs J600RC 85.5 lbs
Weld-On Adapter Nose J460WN 19.2 lbs J550WN 29.0 lbs J600WN 56.0 lbs
Pins & Retainers Pin Retainer Pin Retainer Pin Retainer Pin Retainer Pin Retainer
Standard Groove Pin 6Y2527 (450) 6Y9459 (450) 1U1558 3G9559 6I6608 6I6609 4T4708 4T4707 102 0101 101 2874
Radius Groove Pin 8E0468 (460) 8E0469 (460) 6Y8558 8E5559 9UI9616 4T4707
Heavy Duty Pin 114 0468 (460) 107 3469 (460) 107 3378 107 8559 113 9608 113 9609 113 4708 113 1809 134 1808 134 1809

140 TITAN 2014 / 2015 CATALOGUE

TEETH & ADAPTERS
BUCKET TEETH

Teeth and Adapters

Top Pin Teeth & Adapters Unitooth
Part Number Description Weight Part Number Tooth Style Weight Model, Bucket Family

4K6936 Standard Long 3.4 lbs 135 8203 Bolt-on Unitooth 6.3 lbs 438, 436, 428, 426, 416
4K6936SXC Top Pin Tooth 3.5 lbs 132 4720 Bolt-on Unitooth 4.0 lbs 908, 906, 902
4K6936Tiger Top Pin Tiger Tooth 2.9 lbs 135 9390 Bolt-on Unitooth 3.6 lbs 300 Series
4K6984 Adapter for Top Pin 5.5 lbs 138 6410 Bolt-on Unitooth 2.5 lbs
4K0034SXC Top Pin Tooth 4.9 lbs
4K0034Tiger Top Pin Tiger Tooth 5.2 lbs
4K0034RCM18 Adapter for Top Pin 6.0 lbs

Bolt On Loader Adapters

Part Number Description Weight Thickness Series Model or Family Bolt Diameter

6I9898 Center 63.2 lbs 1.75” J400 980G, H, F, C 1.25”

6I8243/44 Corner RH/LH 77.9 lbs 1.75” J400 980G, F 1.25”
1U1357 Center 43.7 lbs 1.75” J350 980C, F, 977, 973C 1.25”
1U1358/59 Corner RH/LH 57.0 lbs 1.75” J350 980, 973C 1.25”
3G3357 Center 43.3 lbs 1.50” J350 977, 973, 972, 970, 966, 963, 962, 960 1.25”
8E5359/58 Corner RH/LH 59.4 lbs 1.25” - 1.50” J350 977, 973, 970, 966, 960 1.25”
3G9307 Center 35.4 lbs 1.25” J300 966C, 229, 225, E240 1.25”
4T4307 Center 30.9 lbs 1.25” J300 963, 962, 960, 955, 950, 903, IT62, 38, 28, 26, 24, 14, 12 1.00”
963, 962, 960, 955, 953, 951, 950, 944, 943, 938, 936, 930,
1U0307 Center 28.5 lbs 1.00” J300 1.00”
928, 926, 924, 920, 916, IT62, 38, 28, 26, 24, 14, 12
8E5309/08 Corner RH/LH 45.3 lbs 1.00” - 1.25” J300 963, 962, 960, 955, 953, 950, 944 1.25”
953, 951, 943, 941, 939, 938, 936, 930, 928, 926, 924, 920,
1U0257 Center 22.5 lbs 1.00” J250 1.00”
916, IT62, 38, 28, 26, 24, 14, 12
953, 951, 943, 941, 939, 938, 936, 935, 933, 931, 930, 928,
6I9251/50 Corner RH/LH 35.2 lbs 1.00” J250 1.00”
926, 924, 920, 916, IT12-28
8E2184 5.20 lbs 0.875” J200 438, 436, 428, 426, 416 0.63”

Weld On Flush Mount Adapters

Part Number Weight Thickness Series Model or Family

8E0464 44.4 lbs

1.75” - 2.00” J460 988, 983, 980, 973
8E0465/466 55.4 lbs
107 3404 43.0 lbs 1.50” - 2.00” J400 988, 980, 973
1U1354 30.1 lbs
1.25” - 1.75” J350 980, 977, 973, 966, 960, 963, 245
1U1355/36 30.8 lbs
966, 963, 955, 953, 950, 943, 938, 936,
1U1304 20.4 lbs 1.00” - 1.50” J300 930, 928, 927, 926, 920, 235, IT62, 38, 28,
26, 24, 14, 12
953, 951, 943, 941, 938, 936, 930, 928,
1U1254 15.3 lbs 0.75” - 1.25” J250 926, 920, 918, 916, 914, 426, 416, 214,
205, IT62, 38, 28, 26, 24, 14, 12

Bolt On Scraper Adapters

Part Number Weight Series Bolt Diameter Model or Family

9J2307 27.4lbs J300 1.00” 623, J621, J619, 615 (47Z1340-up)

9J8455 15.4 lbs J250 0.75” 613

Bottom Strap Adapter

Part Number Weight Thickness Series Model or Family

8J7525 3.5 lbs 0.50” - 0.75” J200 935, 931, 438, 436, 428, 426, 416

TITAN 2014 / 2015 CATALOGUE 141

TEETH & ADAPTERS
BUCKET TEETH

Cutting Edge Hardware

Weld-On Heavy Duty 2 Strap Loader Adapters
Part Number Description Weight Thickness Series Model or Family

6I8804 Center 209.2 lbs

4.00” J800 994
6I8804 RH/LH RH/LH Adapter 232.1 lbs
222 7700 Center 185.2 lbs
3.50” J700 992, 385
Top Pin 222 7700 RH/LH RH/LH Adapter 185.2 lbs
Tooth & Adapter 171 1704 Center 178.6 lbs
3.00” J700 992
171 1705/06 RH/LH Adapter 177.9 lbs
133 0704 Center 149.7 lbs
2.75” J700 992
133 0705/06 RH/LH Adapter 155.2 lbs
Unitooth 119 8604 Center 127.8 lbs
2.75” J600 992
119 8605/06 RH/LH Adapter 130.2 lbs
119 8604 Center 131.4 lbs
2.75” J600 992
119 8605/06 RH/LH Adapter 134.5 lbs
143 3114 Center 121.0 lbs
2.50” J600 992, 990, 988
143 3115/16 RH/LH Adapter 123.9 lbs
Bolt on 107 3554 Center 92.0 lbs
2.50” J550 992, 990, 988
Loader 107 3555/56 RH/LH Adapter 98.0 lbs
Adapter 138 6554 Center 69.1 lbs
2.00” J550 988, 980, 973
138 6555/56 RH/LH Adapter 69.1 lbs
114 0464 Center 41.5 lbs
2.00” J460 988, 980, 973
114 0465/66 RH/LH Adapter 41.7 lbs
Weld On 125 8404 Center 37.2 lbs
Heavy Duty 1.75” J400 980, 973, 966
125 8405/06 RH/LH Adapter 36.0 lbs
2 Strap
113 0354 Center 30.9 lbs
Loader 1.75” J350 980, 973, 966
Adapter 113 0355/56 RH/LH Adapter 31.2 lbs
135 9354 Center 32.4 lbs
1.50” J350 966, 972, 973
135 9355/56 RH/LH Adapter 32.1 lbs

Weld On 2 Strap Excavator Adapters

Part Number Description Weight Thickness Series Model or Family

6I6604 Center 108.6 lbs 3.00” J600 300 Series H, J, W

6I6604 RH/LH RH/LH 113.8 lbs
6I6604 - 85 Center 109.6 lbs 3.35” J600 300 Series H, J, W
6I6604 - 85 RH/LH RH/LH 119.0 lbs
6I6554 Center 79.2 lbs 2.50” J550 300 Series E, F, G, H, V, 245
6I6554SL Solid Leg 82.7 lbs
6I6554-24 Center 80.0 lbs 3.00” J550 300 Series H, J, W
159 0464 Center 48.2 lbs 2.00” J460 300 Series D
159 0464SL Solid Leg 48.5 lbs
159 0464-20 Center 50.9 lbs 2.50” J460 300 Series E, F, G, H, V, 245
8E6464 Center 54.9 lbs 2.00“ J460 300 Series D, E, 8, 235, 229, 225
6I6404 Center 35.0 lbs 1.75” J400 300 Series A, B, C, S,
6I6404-16 Center 36.2 lbs 2.00” 318, 315, 231, 229, 225
6I6354 Center 26.0 lbs 1.57” J350 300 Series A, B, C, S, 235, 231, 229, 225
3G8354 Center 19.7 lbs 1.50” J350 229, 225, 219, 215
3G8355/56 RH/LH 19.5 lbs
8E9490 Center 16.6 lbs 1.42” J300 300 Series A, B, 315, 312, 311
3G6304 Center 17.9 lbs 1.25” J300 300 Series B, 219, 215
3G305/06 RH/LH 17.2 lbs
119 3253 Center 11.5 lbs 1.25” J250 300 Series A, 312, 311, 307
6Y3224 Center 6.9 lbs 1.00” J225 307, 446
119 3204 Center 4.4 lbs 1.00” J200 416, 426, 428, 436, 438
119 3205 Center 4.4lbs 0.75”

142 TITAN 2014 / 2015 CATALOGUE

TEETH & ADAPTERS
BUCKET TEETH

Caterpillar* Side Pin

Teeth
no Hammerless Hammerless no H.
20 22 25 30 35 40 46 55 60 70 80

S MC20S MC22S MC25S MC30S MC35S1 MC45S1 MC55S1

U MC25U MC30U MC35U1 MC40U1 MC45U1 MC55U1 MC70U1
F MC30F MC35F1 MC40F1 MC45F1 MC55F1
P MC30P MC35P1 MC40P1 MC45P1 MC55P1 MC60P1 MC80P
E MC30E MC35E1 MC40E1 MC45E1 MC55E1 MC60E1 MC70E1
EX MC45EX1
V MC20V MC25V MC30V MC35V1 MC40V1 MC45V1 MC55V1 MC60V1 MC70V1
W MC20W MC30W MC35W1 MC40W1 MC45W1 MC55W1
WI MC25WI MC35WI1 MC45WI1 MC60WI1
I MC25I MC30I MC35I1
IX MC45IX1 MC55IX1
L MC20L MC25L MC30L MC35L1 MC40L1 MC45L1 MC55L1
D MC70D1
H MC30H MC35H1 MC40H1 MC45H1 MC55H1 MC80H
A MC25A MC30A MC35A1 MC40A1 MC45A1 MC55A1 MC60A1 MC70A1 MC80A
AX MC35AX1 MC45AX1 MC55AX1 MC60AX1

Locking System
20 22 25 30 35 40 45 46 55 60 70

Pin 2MC35P 2MC40P 2MC45P1 2MC45P 2MC55P 2MC60P 2MC70P

Retainer + Plug 2MC35R 2MC40R 2MC35R 2MC45R 2MC55R 2MC60R 2MC70R
Tool 3MTWIST M 3MTWISTM 3MTWIST M 3MTWIST X 3MTWIST X 3MTWIST X 3MTWIST X
Supplement 2MC35S 2MC40S 2MC35S 2MC45S 2MC55S 2MC60S 2MC70/80S

Remop
20 22 25 30 35 40 45 46 55 60 70 80

P R8E6208 R6Y3228 R8E6258 R107-3308 R8E6358 R7T3408 R4T1458-G R8E0468 R6Y8558 R6I6608 R9U9616-G R1020101
R R8E6209 R8E6259 R8E6259 R8E6259 R8E6359 R8E8409 R8E6359 R8E8469 R8E5559 R6I6609 R4T4707 R1012874

TITAN 2014 / 2015 CATALOGUE 143

TEETH & ADAPTERS
BUCKET TEETH

Caterpillar* Side Pin

Teeth
Length Ref A B D E Weight
mm inch mm inch mm inch mm inch kgs lbs

20 MC20S 162 6.38 32 1.26 58 2.28 66 2.60 1,2 2.6

MC20V 173 6.81 4 0.16 58 2.28 66 2.60 1,1 2.5
MC20W 173 6.81 83 3.27 58 2.28 66 2.60 1,4 3.1
MC20L 161 6.34 61 2.40 58 2.28 66 2.60 1,3 2.9
22 MC22S 188 7.40 37 1.46 68 2.68 85 3.35 2,1 4.5
25 MC25S 210 8.27 39 1.54 77 3.03 91 3.58 2,6 5.7
MC25U 214 8.43 80 3.15 77 3.03 91 3.58 3,4 7.6
MC25V 220 8.66 6 0.24 77 3.03 91 3.58 2,6 5.7
MC25WI 205 8.07 104 4.09 77 3.03 91 3.58 2,9 6.5
MC25I 175 6.89 48 1.89 77 3.03 91 3.58 2,3 5.2
MC25L 211 8.31 81 3.19 77 3.03 91 3.58 3,5 7.8
MC25A 240 9.45 50 1.97 77 3.03 91 3.58 5,2 11.5
30 MC30S 237 9.33 46 1.81 93 3.66 110 4.33 4,1 9.1
MC30U 241 9.49 90 3.54 93 3.66 110 4.33 4,8 10,6
MC30F 234 9.21 150 5.91 93 3.66 110 4.33 5,2 11.5
MC30P 230 9.06 35 1.38 93 3.66 110 4.33 4,1 8.9
MC30E 250 9.84 47 1.85 93 3.66 110 4.33 5,5 12.0
MC30V 250 9.84 6 0.24 93 3.66 110 4.33 4,3 9.6
MC30W 250 9.84 138 5.43 93 3.66 110 4.33 5,1 11.1
MC30I 199 7.83 57 2.24 93 3.66 110 4.33 3,9 8.7
MC30L 237 9.33 90 3.54 93 3.66 110 4.33 5,2 11.4
MC30H 238 9.37 59 2.32 93 3.66 110 4.33 6,3 13.9
MC30A 264 10.39 45 1.77 93 3.66 110 4.33 6,9 15.3
35 MC35S1 262 10.31 58 2.28 106 4.17 120 4.72 5,7 12.7
MC35U1 250 9.84 100 3.94 106 4.17 120 4.72 6,2 13.6
MC35F1 271 10.67 182 7.17 106 4.17 120 4.72 8,1 17.9
MC35P1 256 10.08 39 1.54 106 4.17 120 4.72 5,4 11.9
MC35E1 278 10.94 61 2.40 106 4.17 120 4.72 7,1 15.7
MC35V1 280 11.02 6 0.24 106 4.17 120 4.72 5,6 12.3
MC35W1 280 11.02 145 5.71 106 4.17 120 4.72 7,0 15.4
MC35WI1 264 10.39 147 5.79 106 4.17 120 4.72 6,2 13.7
MC35I1 217 8.54 64 2.52 106 4.17 120 4.72 5,3 11.7
MC35L1 265 10.43 106 4.17 106 4.17 120 4.72 6,7 14.9
MC35H1 267 10.51 78 3.07 106 4.17 120 4.72 8,8 19.4
MC35A1 293 11.54 53 2.09 106 4.17 120 4.72 10,4 23.0
MC35AX1 310 12.20 67 2.64 106 4.17 120 4.72 12,9 28.4
40 MC40U1 297 11.69 119 4.69 120 4.72 137 5.39 10,2 22.5
MC40F1 277 10.91 214 8.43 120 4.72 137 5.39 11,4 25.2
MC40P1 288 11.34 36 1.42 120 4.72 137 5.39 7,9 17.5
MC40E1 305 12.01 64 2.52 120 4.72 137 5.39 11,2 24.8
MC40V1 307 12.09 8 0.31 120 4.72 137 5.39 7,2 16.0
MC40W1 307 12.09 167 6.57 120 4.72 137 5.39 9,2 20.3

144 TITAN 2014 / 2015 CATALOGUE

TEETH & ADAPTERS
BUCKET TEETH

Caterpillar* Side Pin

Teeth
Length Ref A B D E Weight
mm inch mm inch mm inch mm inch kgs lbs

40 MC40L1 290 11.42 103 4.06 120 4.72 137 5.39 10,7 23.6
MC40H1 299 11.77 139 5.47 120 4.72 137 5.39 13,5 29.8
MC40A1 330 12.99 61 2.40 120 4.72 137 5.39 14,0 30.9
45 MC45S1 318 12.52 61 2.40 134 5.28 140 5.51 11,4 25.1
MC45U1 325 12.80 125 4.92 134 5.28 140 5.51 13,4 29.7
MC45F1 311 12.24 229 9.02 134 5.28 140 5.51 15,5 34.2
MC45P1 312 12.28 32 1.26 134 5.28 140 5.51 10,2 22.5
MC45E1 338 13.31 54 2.13 134 5.28 140 5.51 14,8 32.6
MC45EX1 335 13.19 136 5.35 134 5.28 140 5.51 16,1 35.4
MC45V1 335 13.19 8 0.31 134 5.28 140 5.51 9,4 20.7
MC45W1 335 13.19 183 7.20 134 5.28 140 5.51 13,0 28.7
MC45WI1 357 14.06 170 6.69 140 5.51 140 5.51 14,3 31.5
MC45IX1 267 10.51 116 4.57 134 5.28 140 5.51 10,8 23.8
MC45L1 315 12.40 63 2.48 134 5.28 140 5.51 13,5 29.7
MC45H1 329 12.95 77 3.03 134 5.28 140 5.51 16,8 37.2
MC45A1 355 13.98 66 2.60 134 5.28 140 5.51 20,3 44.7
MC45AX1 355 13.98 95 3.74 138 5.43 143 5.63 23,3 51.4
55 MC55U1 375 14.76 115 6.10 159 6.26 155 6.10 20,9 46.1
MC55S1 355 13.98 76 2.99 159 6.26 155 6.10 16,0 35.2
MC55F1 360 14.17 283 11.14 159 6.26 155 6.10 27,7 61.1
MC55P1 357 14.06 40 1.57 159 6.26 155 6.10 15,1 33.4
MC55E1 375 14.76 78 3.07 159 6.26 155 6.10 20,9 46.1
MC55V1 370 14.57 9 0.35 159 6.26 155 6.10 13,5 29.7
MC55W1 370 14.57 220 8.66 159 6.26 155 6.10 18,6 40.9
MC55IX1 302 11.89 127 5.00 160 6.30 155 6.14 15,2 33.5
MC55L1 354 13.94 104 4.09 159 6.26 155 6.10 20,6 45.5
MC55H1 360 14.17 118 4.65 159 6.26 155 6.10 27,6 60.8
MC55A1 385 15.16 61 2.40 159 6.26 155 6.10 30,0 66.1
MC55AX1 401 15.80 115 4.55 159 6.26 155 6.10 32,6 71.8
60 MC60P1 410 16.14 49 1.93 199 7.83 196 7.72 26,6 58.6
MC60E1 435 17.13 103 4.06 199 7.83 196 7.72 38,5 84.9
MC60V1 430 16.93 6 0.24 199 7.83 196 7.72 26,6 58.6
MC60WI1 430 16.93 243 9.57 199 7.83 196 7.72 31,6 69.7
MC60A1 454 17.87 115 4.53 199 7.83 196 7.72 52,5 115.7
MC60AX1 479 18.86 122 4.80 199 7.83 196 7.72 60,5 133.4
70 MC70U1 441 17.36 203 7.99 212 8.35 229 9.02 46,6 102.7
MC70E1 510 20.08 136 5.35 212 8.35 229 9.02 51,8 114.2
MC70V1 455 17.91 9 0.35 212 8.35 212 8.35 32,0 70.5
MC70D1 509 20.04 83 3.27 212 8.35 229 9.02 50,0 110.2
MC70A1 494 19.45 142 5.59 212 8.35 229 9.02 60,3 132.9
80 MC80H 495 19.49 245 9.63 240 9.45 240 9.45 86,1 189.8
MC80A 572 22.52 125 4.92 240 9.45 240 9.45 98,0 216.1

TITAN 2014 / 2015 CATALOGUE 145

TEETH & ADAPTERS
BUCKET TEETH

Caterpillar* Side Pin

Ref. B
inch

3MTWIST M 1/4 / 3/8

3MTWIST X2 1/2 / 3/4

Locking System
MTGtwist Remop Bmm
inch mm

20 P R8E6208 11 0.43
R R8E6209
22 P R6Y3228 14 0.55
R R8E6259
25 P R8E6258 14 0.55
R R8E6259
30 P R107-3308 14 0.55
R R8E6259
35 P 2MC35P R8E6358 19 0.75
R 2MC35R R8E6359
40 P 2MC40P R7T3408 22 0.87
R 2MC40R R8E8409
45 P 2MC45P1 R4T1458-G 19 0.75
R 2MC35R R8E6359
46 P 2MC45P R8E0468 24 0.94
R 2MC45R R8E8469
55 P 2MC55P R6Y8558 25 0.98
R 2MC55R R8E5559
60 P 2MC60P R6I6608 30 1.18
R 2MC60R R6I6609
70 P 2MC70P R9U9616-G 32 1.26
R 2MC70/80R R4T4707
80 P R1020101 35 1.38
R R1012874

146 TITAN 2014 / 2015 CATALOGUE

TEETH & ADAPTERS
RIPPER TEETH

Ripper & Scarifier Teeth, Shanks & Protectors

Ripper Tooth / Tip

B C 9W4552 198-78-21340 395R18B

Black Cat Ripper Teeth for Caterpillar® Applications

Part Number Description Weight Model or Family A B C

6Y0309 R300 Penetration 12.3 lbs D5M, N, 160H, 163, 14, 140, 143H, 12 4.19” 3.31” 11.50”
6Y0359 R350 Penetration 28.0 lbs D7R,163, 14,D6K,140,M,143H,N, D5M,130,N,1224H, 16, 160H, 5.81” 4.75” 14.13”
6Y0352 R350 Centerline 26.0 lbs 163, 14, 140, 143H, 130, 12 5.82” 4.73” 14.00”
9W2452 R450 Intermediate Centerline 49.0 lbs 6.75” 5.63” 15.00”
4T5452 R450 Intermediate Penetration 41.0 lbs D9H, N, R, T, D8N, K, L, R, T 6.81” 5.63” 15.63”
1140453 R450 Long Centerline 55.0 lbs 6.77” 5.63” 16.65”
8E8503 R500 Long Centerline 75.0 lbs 9.24” 6.49” 19.00”
4T5501 R500 Short Penetration 54.9 lbs 8.60” 6.16” 15.00”
4T5502 R500 Intermediate Penetration 67.0 lbs D11N, R, D10N, R, T, D9L, R, T, 9.25” 6.50” 16.75”
4T5503 R500 Long Penetration 67.0 lbs 9.25” 6.44” 18.50”
4T4502 R500 Intermediate Centerline 59.4 lbs 8.60” 6.16” 16.50”
9W4551 R550 Short Centerline 93.0 lbs 11.15” 7.36” 17.63”
9W4552 R550 Intermediate Centerline 108.0 lbs D11N, R 11.15” 7.36” 21.25”
6Y3552 R550 Intermediate Penetration 103.0 lbs 10.93” 6.84” 21.25”

Ripper Teeth for Komatsu® Applications

Part Number Description Weight Model or Family A B C

141-78-11253 Non-centerline 25.8 lbs D60, D61, D65, D75 6.41” 4.81” 11.00”
175-78-31230 Centerline 31.5 lbs D85, D135, D150, D155 6.71” 4.75” 13.19”
195-78-21331 Centerline 35.7 lbs D275, D355 7.71” 4.88” 14.50”
195-78-71320 Non-Centerline 54.7 lbs D375 8.47” 5.12” 16.50”
195-78-71350 Centerline 56.4 lbs 8.14” 5.00” 18.50”
198-78-21340 Non-Centerline 83.6 lbs D475 9.86” 6.08” 20.08”
198-78-21370 Centerline 79.5 lbs 9.45” 6.13” 17.50”
19M-78-11341 Centerline 87.2 lbs D575 9.61” 7.74” 19.53”

Ripper Teeth for Esco® Applications

Part Number Description Weight Model or Family A B C

22R10 Non-centerline Rib 8.5 lbs Esco* 22R Rippers 3.64” 3.35” 10.66”
25R12 Non-centerline Rib 13.7 lbs Esco* 25R Rippers 4.48” 3.83” 12.05”
35-R15 Non-centerline 32.1 lbs Esco 35-5R Rippers* 6.51” 6.51” 4.92” 15.50”
39-5R18B Non-centerline Rib 48.8 lbs Esco* 39-5R Rippers 7.53” 6.12” 18.12”

Scarifier Tips
Part Number Description Weight Model or Family A B C

6Y5230 Grader Scarifier 3.4 lbs 1.44” 1.91” 7.13”

Replaces 2D5572
6Y5230LP Long Scarifier 3.8 lbs 1.90” 1.87” 8.50”
9937 Ripper Tooth 7.3 lbs All Champion® and Volvo® Graders 0.06” 3.66” 8.98”

TITAN 2014 / 2015 CATALOGUE 147

TEETH & ADAPTERS
RIPPER TEETH

Ripper & Scarifier Teeth, Shanks & Protectors

Ripper / Scarifier Shank
9F5124

T211749 C A

Scarifier Shanks
Part Number Description Weight Model or Family A B C

101 Scarifier Shank 12.6 lbs Universal 1.00” 3.00” 17.25”

104 Scarifier Shank 14.5 lbs Universal 1.00” 3.00” 20.00”
5B6251 Scarifier Shank 9.5 lbs Rear Notch 1.00” 2.50” 15.13”
9F5124 Scarifier Shank 12.6 lbs Front Notch 1.00” 3.00” 17.25”
9F5124BS Scarifier Shank 12.6 lbs Rear Notch 1.00” 3.00” 17.25”
8110 Scarifier Shank 13.9 lbs Front Notch 0.94” 3.00” 16.94”
H920-23 Scarifier Shank 6.6 lbs Front Notch 0.72” 2.50” 13.56”
5K1459 Scarifier Pin 0.6 lbs Universal 0.69” 1.00” 4.50”

Ripper Shanks
Part Number Weight Model or Family A B C Hole Size

9J6586 63.7 lbs D4, D5, 12, 120, 130, 14, 140, 16, 160 2.25” 5.38” 21.34” 1.87”
1380797 (9J3139) 122.6 lbs D5, D6, D7, 24H 2.92” 6.87” 28.40” 2.16”
T211749 77.8 lbs 450J, 550J, 650J, 670, 672, 770, 772, 870, 872 2.25” 5.38” 24.39” 1.87”
9934 64.8 lbs Champion®/Volvo® graders 1.77” 8.55” 23.51” 1.61”

Repair Parts

A C D

B
25RWN 8E7350 103 8114

Ripper Repair Parts

Part Number Description Weight Model or Family A B C D Holes

8E7300 R300 Replacement Nose 6 lbs D4, D5, 12, 120, 130, 14, 140, 16, 160 3.44” 5.31” 2.00” 2.19” 1
8E7350 R350 Replacement Nose 12 lbs D5, D6, D7, 24H 4.44” 6.63” 2.63” 2.94” 1
8E8418 R450 Quarter Shank 156 lbs 12.75” 17.42” 2.98” 3.24” 3
D8,D9
9U9694 R450 Replacement Nose 43 lbs 8.00” 12.25” 2.94” 2.88” 2
103 8115 R500 Quarter Shank 167 lbs 12.61” 20.47” 3.06” 3.94” 2
103 8114 R500 Replacement Nose 97 lbs D9, D10, D11 10.56” 17.44” 3.06” 3.94” 2
107 3361 R500 Replacement Nose 96 lbs 11.06” 15.13” 3.06” 3.94” 2
104 9279 R550 Quarter Shank 276 lbs D11 16.26” 24.03” 3.31” 4.38” 2
22RN Replacement Nose 13.1 lbs Esco* 22R Rippers 5.79” 6.72” 1.51” 3.06” 1
25RWN Replacement Nose 18.1 lbs Esco* 25R Rippers 6.00” 7.44” 1.76” 3.58” 1
35-5RWN Replacement Nose 44.1 lbs Esco* 35-5R Rippers 8.63” 10.35” 2.26” 4.78” 1
39-5RWN Replacement Nose 58.8 lbs Esco* 39-5R Rippers 9.69” 3.14” 2.38” 5.02” 1

148 TITAN 2014 / 2015 CATALOGUE

TEETH & ADAPTERS
RIPPER TEETH

Ripper & Scarifier Teeth, Shanks & Protectors

B
A

D
9N4621 132 4716 138 0796 195-78-71110

Black Cat Ripper Shank Protectors for Caterpillar® Applications

Part Number Description Weight Model or Family A B C D

138 0796 R350 1 Pin Standard Protector 21 lbs D5, D6, D7, 24H n/a 12.75” 4.30” 3.05”
8E1848 R450 2 Pin Sharp Protector 56 lbs 12.25” 19.13” 5.00” 3.25”
132 4716 R450 2 Pin Standard Protector - Extended 54 lbs 12.31” 27.11” 4.88” 3.19”
D8/D9
6J8814EXT R450 2 Pin Standard Protector - Extended 51 lbs 12.25” 23.00” 4.75” 3.13’
6J8814 R450 2 Pin Standard Protector 27 lbs 12.25” 17.00” 4.25” 3.13”
9W8365EXT R500 2 Pin Sharp Protector - Extended 101 lbs 16.00” 34.38” 5.75” 3.63”
D9/D10
1U3644 R500 1 Pin Standard Protector 90 lbs n/a 29.00” 5.25” 4.13”
132 1015 R500 2 Pin Sharp Protector - Extended 185 lbs 15.62” 34.25” 6.50” 4.38”
D10/D11
6Y8960 R500 2 Pin Sharp Protector 40 lbs 15.62” 22.06” 5.50” 4.38”
132 1016 R550 2 Pin Sharp Protector - Extended 241 lbs 23.16” 36.60” 7.19” 4.75”
D11
9N4621 R550 2 Pin Sharp Protector 157 lbs 23.24” 28.77” 6.31” 4.75”

Ripper Shank Protectors for Komatsu® Applications

Part Number Description Weight Model or Family A B C D

195-78-21320 2 Pin Standard Protector 31 lbs 13.56” 16.56” 4.50” 3.13”

D155, D275, D355
195-78-21580 2 Pin Standard Protector - Extended. 50 lbs 13.56” 27.25” 4.50” 3.13”
195-78-71110 2 Pin Standard Protector 69 lbs 18.38” 21.48” 5.20” 3.25”
D375
195-78-72410 2 Pin Standard Protector - Extended. 101 lbs 18.38” 33.72” 5.50” 3.25”
198-78-21330 2 Pin Standard Protector 100 lbs 16.75” 21.53” 5.75” 4.20”
D475
198-78-21390 2 Pin Standard Protector - Extended. 140 lbs 16.75” 35.36” 5.75” 4.20”

TITAN 2014 / 2015 CATALOGUE 149

TEETH & ADAPTERS
RIPPER TEETH

Caterpillar* Ripper
Teeth
30 35 45 50 55

I MR45I MR50I MR55I

S MR30S MR35S MR45S MR50S MR55S
P MR30P MR35P MR45P MR50P MR55P
A MR35A MR45A
AX MR50AX

Locking System
30 35 45 50 55

I R4T2479 R3G0500 R9W1821

II R9J6583
III R8E6358
IV R1U2405 R1U2405
V R6Y1204*
VI R6Y1202*

(*) Locking System non reusable, only available in Europe

Caterpillar* Ripper

Teeth
Length Ref A B D E Weight
mm inch mm inch mm inch mm inch kgs lbs

30 D4. 963. 955. 951. 163H. MR30S 292 11.50 48 1.89 88 3.46 119 4.69 5,2 11.6
160H. 143H. 140. 130. 14. 12
MR30P 298 11.73 38 1.50 88 3.46 119 4.69 5,2 11.6
35 D7. D6. D6N. D5. MR35S 338 13.31 68 2.68 108 4.25 159 6.26 10,5 23.3
D5N. 977. 973. 16
MR35P 348 13.70 52 2.05 108 4.25 159 6.26 10,9 24.0
MR35A 389 15.31 61 2.40 108 4.25 159 6.26 11,5 25.3
45 D9. D8L. D8 MR45I 343 13.50 68 2.68 122 4.80 183 7.20 14,9 33.0
MR45S 388 15.28 74 2.91 122 4.80 183 7.20 16,3 35.9
MR45P 399 15.71 65 2.56 122 4.80 183 7.20 15,8 34.9
MR45A 423 16.65 65 2.56 122 4.80 183 7.20 18,1 39.9
50 D11 MS. D10N. D10. D9L MR50I 403 15.87 77 3.03 151 5.94 233 9.17 26,8 59.1
MR50S 443 17.44 76 2.99 151 5.94 233 9.17 29,0 64.0
MR50P 452 17.80 68 2.68 151 5.94 233 9.17 29,1 64.1
MR50A 482 18.98 76 2.99 151 5.94 233 9.17 30,2 66.6
MR50AX 480 18.90 76 2.99 151 5.94 233 9.17 27,7 61.1
55 D11 (SS. DR) MR55I 481 18.94 85 3.35 184 7.24 285 11.22 44,4 97.9
MR55S 559 22.01 81 3.19 184 7.24 285 11.22 45,1 99.4
MR55P 555 21.85 69 2.72 180 7.09 275 10.83 43,1 94.9

150 TITAN 2014 / 2015 CATALOGUE

TEETH & ADAPTERS
RIPPER TEETH

Caterpillar* Ripper

Locking System
Ref Bmm
inch mm

30 II R9J6583 19 0.75
IV R1U2405 – –
35 III R8E6358 19 0.75
IV R1U2405 – –
45 I R4T2479 25 0.98
50 I R3G0500 32 1.26
V R6Y1204 * 32 1.26
VI R6Y1202 * – –
55 I R9W1821 35 1.38

(*) Locking System non reusable, only available in Europe

TITAN 2014 / 2015 CATALOGUE 151

TEETH & ADAPTERS
HAMMERLESS TEETH

RVC Ripper Teeth

Convert to Fully Hammerless Revolution without changing Ripper Shanks!
– Fits D10 / D11 R Series Rippers
– Hammerless Pin for Safe & Easy
Installation A
– Self Cleaning Pin for Ease of Removal
B C

1 2 3

RVC500 PTM
RVC550 CLS
Insert Lock into RV Convertor Place Convertor
t onto
nto Shank Insert Helical Pin & Rotate 180 degrees
& Fit Tooth over Nose with Socket Wrench to Engage Lock
Ripper Shanks
Part Number Description Weight A B C Pin Lock Convertor

RVC500 PTM Intermediate Penetration 68 lbs 9.27” 6.99” 16.75” RVC500P P3RL RVC500C
RVC550 CLS Short Centerline 94 lbs 11.28” 7.10” 18.00” RVC550P P3RL RVC550C

RVJ Teeth
Convert to Fully Hammerless Revolution without changing Adapters!

Standard Flare Penetration Plus Tiger

Heavy Duty
Twin Tiger Extra Loader
Abrasion

Ripper Shanks
Tooth Standard Flare Penetration Plus Tiger Twin Tiger Extra Loader Heavy Duty Abrasion Pin Lock Convertor

J350 RVJ350S RVJ350F RVJ350PP RVJ350T RVJ350TT RVJ350E RVJ350LD RVJ350HDAL RVJ350P P1RL RVJ350C
14.0 lbs 16.1 lbs 15.2 lbs 12.4 lbs 16.2 lbs 16.8 lbs 25.9 lbs 25.5 lbs
J400 RVJ400S RVJ400F RVJ400PP RVJ400T RVJ400TT – RVJ400LD RVJ400HDAL RVJ400P P1RL RVJ400C
19.4 lbs 21.8 lbs 19.6 lbs 16.5 lbs 22.8 lbs 36.4 lbs 37.3 lbs
J450 RVJ450S RVJ450F RVJ450PP RVJ450T RVJ450TT RVJ450E RVJ450LD RVJ450HDAL RVJ460P P1RL RVJ460C
27.8 lbs 33.1 lbs 30.2 lbs 24.8 lbs 33.2 lbs 32.4 lbs 51.2 lbs 55.3 lbs
J550 RVJ550S RVJ550F RVJ550PP RVJ550T RVJ550TT – RVJ550LD RVJ550HDAL RVJ550P P2RL RVJ550C
41.3 lbs 47.1 lbs 51.2 lbs 40.0 lbs 46.7 lbs 75.2 lbs 72.4 lbs

1 2 3

Insert Lock into RV Convertor Place Convertor onto J Series Adapter Insert Helical Pin & Rotate 180 degrees
& Fit Tooth over Nose with Socket Wrench to Engage Lock

152 TITAN 2014 / 2015 CATALOGUE

TEETH & ADAPTERS
HAMMERLESS TEETH

RVR Ripper System

RVR 350PTM

– Fits D5/D6 Dozers & 16/24 Graders

– Hammerless Pin for Safe & Easy
Installation
– Fully Stabilized Nose & Pocket
Lock Helix Pin – Replaces existing R350 Ripper Shanks

A
A

C B C B

Part Number Description Weight A B C

RVR 13080797 RVR 1380797 Ripper Shank 125 lbs 6.86” 2.92” 28.24”
RVR 350PTM Ripper Tooth 29 lbs 6.17” 4.72” 14.13”
RVR 350PTMCI2 Ripper Tooth with Carbide 31 lbs 6.17” 4.72” 14.13”
RVR 350NOSE Ripper Nose 17 lbs 6.10” 2.92” 8.30
RVR 350PIN Helix Pin 0.8 lbs
P2RL Rubber Lock

1 2 3

Insert Lock into Cavity of Ripper Nose Fit Tooth on Fully Stabilized Ripper Nose Insert Helical Pin and Rotate 180 degrees
with Socket Wrench to Engage Lock

TITAN 2014 / 2015 CATALOGUE 153

PLATES & ATTACHMENTS
BUCKET ATTACHMENTS

Sidebar Protectors

C D

C
A

Black Cat Sidebar Protectors for Caterpillar® Applications

Part # Description Pin Retainer Model Weight A B C D

135 8246 Sidebar Protector 135 9292 114 0359 962G,H, 972G,H, 980G,H 24.0 lbs 18.19” 9.38” 2.69” 1.13”
112 2489 Sidebar Protector 112 2490 132 0999 New B, C, D, S Excavator Buckets 40.0 lbs 17.13” 7.94” 2.88” 1.38”
166 2877 Sidebar Protector 132 0998 132 0999 New E, F, G, H, V Excavator Buckets 40.5 lbs 18.13” 7.88” 3.00” 1.56”
9J9600 Sidebar Protector 135 9350 114 0359 980, 988, D8, D9 44.5 lbs 22.69” 10.00” 3.63” 1.50”
152 0027 Adapter Plate for 9J9600 N/A N/A D8, D9 18.3 lbs 16.06” 10.00” 1.19” N/A
1U0740 Sidebar Protector 1U0739 8E5559 990, 992, 300 Series, 5080 55.6 lbs 23.81” 11.50” 4.13” 2.13”
1U0740HD Sidebar Protector 1U0739 8E5559 992C, D, G, 990 67.2 lbs 23.81” 11.50” 4.13” 2.13”
112 2494 Sidebar Protector 132 0998 132 0999 New E, F, G, H Excavator Buckets 77.3 lbs 37.00” 20.56” 3.13” 1.63”
125 0800 Sidebar Protector 8E4708 4T4707 994, D10, D11, 5080 121.6 lbs 40.00” 23.63” 5.25” 2.75”

Universal Sidebar Protectors

Part # Description Pin Retainer Model Weight A B C D

VS450 Vertical Shroud VSP2-SL VSR3-SL Universal 43.7 lbs 30.34” 13.5” 2.63” N/A
VS450EXT Vertical Shroud Extension VSP2-SL VSR3-SL Universal 27.3 lbs 21.04” N/A
VS500 Vertical Shroud VSP3-SL VSR3-SL Universal 67.5 lbs 32.88” 16.0” 3.44” N/A
VS550 Vertical Shroud VSP3-SL VSR3-SL Universal 86.6 lbs 35.75” 17.13” 4.0” N/A
VSMWN Vertical Shroud Mount N/A N/A Universal 4.7 lbs N/A N/A
VSM100WN Vertical Shroud Mount N/A N/A Universal 11.4 lbs 2.75” 1.06”
VSM150WN Vertical Shroud Mount N/A N/A Universal 12.9 lbs 3.44” 1.56”
VSM175WN Vertical Shroud Mount N/A N/A Universal 12.1 lbs 3.44” 1.84”
VSM200WN Vertical Shroud Mount N/A N/A Universal 11.1 lbs 3.44” 2.06”
VSM250WN Vertical Shroud Mount N/A N/A Universal 13.2 lbs 3.94” 2.56”

154 TITAN 2014 / 2015 CATALOGUE

PLATES & ATTACHMENTS
WEAR PLATES

Corner, Lip & Heel Protection

Corner Protectors
Part Number Description Weight Length A B C

CG24-5 Round Edge 31.5 lbs 24” 3.88” 3.50” 0.63” A B

CG36-6 Square Edge 67.8 lbs 36” 4.13” 3.63” 0.75”
C

Weld On Lip Shrouds

Part # Description Weight A B C D E B
10WS Weld On Lip Shroud 19.6 lbs 10.00” 7.00” 7.38” 1.50” 30°
13WS Weld On Lip Shroud 40.7 lbs 13.00” 10.00” 10.25” 1.75” 23°
WS25 Weld On Lip Shroud 4.0 lbs 2.50” 2.50” 4.88” 1.75” 22°
WS45 Weld On Lip Shroud 14.2 lbs 4.50” 4.50” 7.17” 2.09” 30°
WS80 Weld On Lip Shroud 33.4 lbs 8.00” 7.00” 8.57” 2.79” 30° A E D
4ML50UC Weld On Lip Shroud 14.6 lbs 5.59” 5.15” 8.12” 1.38” 30°
4ML70UC Weld On Lip Shroud 45.3 lbs 9.47” 8.93” 9.49” 2.38” 30°
C

Weld On Heel Shrouds

Part Number Description Weight A B C D

138 6551 Heel Shroud - Curved 26.9 lbs 6.88” 8.13” 5.88” 1.00” D
138 6529 Heel Shroud - Straight 29.6 lbs 6.88” 8.13” 5.88” 1.00”
157 1027 Heel Shroud - Curved 59.3 lbs 9.81” 10.63” 7.88” 1.19”
157 1019 Heel Shroud 65.1 lbs 9.81” 10.63” 7.88” 1.19”
280 4078 Heel Shroud - Straight 10.8 lbs 4.70” 5.90” 4.30” 0.79”
B
280 4079 Heel Shroud - Curved 9.3 lbs 4.70” 5.90” 4.30” 0.79”
ES6697-2 Heel Shroud- Curved 45.9 lbs 7.49” 9.91” 6.00” 2.30”
ES6697-3 Heel Shroud- Curved 29.9 lbs 7.49” 7.00” 4.00” 1.24”
ES6697-4 Heel Shroud- Curved 22.4 lbs 7.49” 7.00” 4.00” 1.24”
ES6697-5 Heel Shroud- Curved 87.5 lbs 9.99” 12.00” 8.00” 2.00” A C
ES6697-7 Heel Shroud 189.5 lbs 9.84” 13.70” 9.88” 3.94”

TITAN 2014 / 2015 CATALOGUE 155

PLATES & ATTACHMENTS
WEAR PLATES

Scraper Accessories

Part Number Description Weight

4J8665 Router Bit 57.0 lbs

4J8665W Router Bit - Weldable 57.0 lbs
7J3023 Router Bit - Heavy Duty 87.0 lbs
7J3023W Router Bit - Heavy Duty Weldable 87.0 lbs
220 9150 Router Bit - Level Cut 112.4 lbs
229 7147/48 Router Supports RH/LH 41.6 lbs
208 5185/86 Router Supports for Bolt Hole Replacement RH/LH 12.3 lbs
208 5185REV Router Support for Bolt Hole Replacement Reversible 12.3 lbs
8J7210/11 Scraper Floor Guides RH/LH 17.0 lbs
651PB Push Block 872.0 lbs
631PB Push Block 721.0 lbs
TOWHOOK Tow Hook 18.0 lbs
9J1107 Scraper Edge 142.0 lbs
9J1108 Scraper Edge 99.0 lbs
9J1107SEG Scraper Edge 132.0 lbs
9J1108SEG Scraper Edge 89.0 lbs
106 2894/95 Router Bits RH/LH for Reynolds® 51.8 lbs
920 4662/61 TS14 Router Bits RH/LH for Terex® 64.0 lbs

156 TITAN 2014 / 2015 CATALOGUE

PLATES & ATTACHMENTS
WEAR PLATES

KenCast Wear Parts Order Information

Part number Order code A B C D

KCWB-0367 1094287 1 2 1/2 1/8

KCWB-0246 1012536 1 2 1/2 1/4
KCWB-0414 1624932 5/8 5 1/4 5/8 1/4
KCWB-0254 1012544 5/8 2 3/4 1/4
KCWB-0201 1012504 5/8 4 3/4 1/4
KCWB-0255 1012545 3/4 2 3/4 1/4
KCWB-0378 1155344 3/4 5 3/4 1/4
KCWB-0055-20 1012633 1 2 3/4 1/4
KCWB-0055-30 1012634 1 3 3/4 1/4
KCWB-0055-35 1012635 1 3 1/2 3/4 1/4
KCWB-0055-40 1012636 1 4 3/4 1/4
KCWB-0055-50 1012637 1 5 3/4 1/4
KCWB-0055-60 1012638 1 6 3/4 1/4
KCWB-0055-80 1012639 1 8 3/4 1/4
KCWB-0096 1012447 1 10 3/4 1/4
KCWB-0097 1012448 1 12 3/4 1/4
KCWB-0362 1083967 1 1/2 2 3/4 1/4
KCWB-0067 1012436 1 1/2 5 3/4 1/4
KCWB-0056-20 1012640 2 2 3/4 1/4
KCWB-0056-35 1012641 2 3 1/2 3/4 1/4
KCWB-0056-40 1012642 2 4 3/4 1/4
KCWB-0056-60 1012643 2 6 3/4 1/4
KCWB-0056-80 1012644 2 8 3/4 1/4
KCWB-0342 1012628 2 10 3/4 1/4
KCWB-0394*** 1324494 2 1/2 8 3/4 1/4
KCWB-0395*** 1324495 2 1/2 12 3/4 1/4
KCWB-0073* 1012437 2 5/8 5 1/4 3/4 1/4
KCWB-0057-20 1012645 3 2 3/4 1/4
KCWB-0057-35 1012646 3 3 1/2 3/4 1/4
KCWB-0057-40 1012647 3 4 3/4 1/4
KCWB-0057-60 1012648 3 6 3/4 1/4
KCWB-0057-80 1012649 3 8 3/4 1/4
KCWB-0337 1012622 4 13 3/4 1/4
KCWB-0484 1996381 5 8 3/4 1/4
KCWB-0333 1012618 6 10 3/4 1/4
KCWB-0345** 1080018 1 3/4 9 7/8 1/4
KCWB-0019** 1012422 2 9 7/8 1/4
KCWB-0389 1308317 5/8 3 1 1/4
KCWB-0399 1502226 3/4 8 1 1/4
KCWB-0471 1919347 1 1/2 6 1 1/4
KCWB-0084 1012443 1 4 1 1/4
These drawings represent our most
KCWB-0022 1012423 2 10 1 1/4
popular standard sizes of KenCast
KCWB-0105 1012452 2 12 1 1/4
parts. In addition to these sizes, we
also make special sizes to suit nearly KCWB-0098 1012449 5 8 1 1/4

any machine or application. Contact KCWB-0094 1083557 8 3/4 10 3/4 1 1/4

Kennametal at 800-222-9327 to find KCWB-0496 2036144 2 6 1 1/4 1/4
out more about special orders. KCWB-0284 1012573 2 13 1 1/4 1/4

All dimensions are in inches. NOTE: Gray shading indicates carbide location on the part.
*3/8” radius along one 5 1/4” edge
**1/8” radius along all edges on carbide side
*** weld bevels along length only

TITAN 2014 / 2015 CATALOGUE 157

PLATES & ATTACHMENTS
WEAR PLATES

KenCast Wear Parts Order Information

Part number Order code A B C D

KCWB-0243 1012534 1 1/2 1 1/2 1 1/4 2

Part number Order code A B C
KCWB-0290 1012579 1 1/2 3 1/4 1 1/4 2 1/8
KCWB-0279 1012568 1/2 1 1/2 1/4
KCWB-0280 1012569 1/2 2 1/4
KCWB-0281 1012570 1/2 3 1/4
All dimensions are in inches.
NOTE: Gray shading indicates carbide location on the part.

Part number Order code A B C D

KenCast Hardness Properties
KCWB-0277 1012566 1 8 1/4 1/8
KCWB-0216 1012515 1 1/2 6 1/4 1/8
KCWB-0210 1012512 2 2 1/4 1/8
KCWB-0278 1012567 2 8 1/4 1/8
KCWB-0241 1012532 3 6 1/4 1/8
KCWB-0132 1012461 1/2 4 1/2 1/4
KCWB-0300 1012586 3/4 4 1/2 1/4
KCWB-0301 1174410 1 3 1/2 1/4
KCWB-0114 1012454 1 4 1/2 1/4
KCWB-0188 1012494 1 1/2 5 1/2 1/4
KCWB-0092 1012445 2 3 1/2 1/4
KCWB-0329 1012614 2 5 1/4 1/2 1/4
KCWB-0091 1012444 2 6 1/2 1/4
KCWB-0100 1012450 2 8 1/2 1/4
KCWB-0095 1012446 2 15 3/4 1/2 1/4
Hardness ranges for composite ingredients:
KCWB-0065 1012435 3 4 1/2 1/4 - tungsten carbide = 86-91 HRA
KCWB-0249 1012539 3 6 1/2 1/4 - matrix steel = 52-58 HRC (bonded to carbide)
KCWB-0302 1714701 1 4 1/2 5/8 1/4 - base steel = 38-50 HRC
KCWB-0083 1012442 1/2 2 3/4 3/4 1/4
KCWB-0186 1012492 1 1/2 10 3/4 1/4
KCWB-0286 1012575 5 12 3/4 1/4
Steel matrix composition:
KCWB-0438* 1796637 2 12 1 1/4 - carbon = .28-.35 - nickel = 1.0-2.0
KCWB-0010 1714704 7 13 2 1/4 - manganese = 1.5-2.0 - chrome = .80-1.2
* With 5.71” radius on carbide face. - silicon = 1.3-1.7 - molybdenum = .20-.30
- aluminum = .08-.15

Steel matrix benefits:

- patented composition
- air-hardening matrix; no heat treatment necessary
- special compositions available upon request
Part number Order code A
- matrix is easily weldable
KCWB-0285 1012574 2 7/8 - machining of matrix not recommended
KCWB-0526 2426055 8 - hardness comparable to specialty abrasion-resistant steels

158 TITAN 2014 / 2015 CATALOGUE

PLATES & ATTACHMENTS
GROUSER BAR

Grouser Lugs

Carbide
Overlay

PTA
Overlay

- Available with Carbide or PTA Overlays Part Number A B C D Weight

- Specially Formulated Steel ACORK3HT 1.25” 3.00” 0.38” 0.25” 0.49 lbs

- Easily Welded To Any Crawler Track Shoe ACORK4HT 1.25” 4.00” 0.38” 0.25” 0.66 lbs

- Improved Traction CCORK3HT 1.50” 3.00” 0.56” 0.38” 0.88 lbs

CCORK4HT 1.50” 4.00” 0.56” 0.38” 1.10 lbs
- Individually Forged
CCORK5HT 1.50” 5.00” 0.56” 0.38” 1.43 lbs
- Target Hardness of 40 - 46 HRC
ECORK3HT 1.50” 3.00” 0.38” 0.31” 0.68 lbs
ECORK4HT 1.50” 4.00” 0.38” 0.31” 0.88 lbs
GCORK3HT 1.75” 3.00” 0.56” 0.38” 1.10 lbs
GCORK4HT 1.75” 4.00” 0.56” 0.38” 1.54 lbs
HCORK4HT 2.06” 4.00” 0.63” 0.38” 1.76 lbs
HCORK6HT 2.06” 6.00” 0.63” 0.38” 2.82 lbs
KCORK3HT 1.25” 3.00” 0.56” 0.38” 0.66 lbs
C KCORK4HT 1.25” 4.00” 0.56” 0.38” 0.88 lbs
LCORK3HT 1.00” 3.00” 0.44” 0.25” 0.40 lbs
LCORK4HT 1.00” 4.00” 0.44” 0.25” 0.55 lbs
A
MCORK4HT 2.38” 4.00” 1.00” 0.50” 2.95 lbs
SCORK4HT 2.00” 4.00” 1.00” 0.31” 2.20 lbs
SCORK6HT 2.00” 6.00” 1.00” 0.31” 3.31 lbs
B TCORK4HT 1.50” 4.00” 1.00” 0.25” 1.76 lbs
D

TITAN 2014 / 2015 CATALOGUE 159

PLATES & ATTACHMENTS
GROUSER BAR

High Carbon Grouser Bar

Rc 25-30 Ice Lugs – Stock L 3”, K 4”
All sizes on request

- All sizes available in 10’ lengths, some pre-cut sizes available.

- +/- 1/8” Variance all Dimensions

Heat Treated Grouser Bar

- All sizes available in 10’ lengths, some pre-cut sizes available.

- +/- 1/8” Variance all Dimensions
- Boron steel facilitates ice lug weldability

160 TITAN 2014 / 2015 CATALOGUE

PLATES & ATTACHMENTS
GROUSER BAR

Chrom-X Heat Treated Grouser Bar

Rc 47-52

Available in
10’ lengths Available in
10’ lengths
Available in
27’ lengths
34’ lengths
24’ lengths
27’ lengths Available in
24’ lengths 34’ lengths

- Enhanced hardenability, with the addition of chromium (P, R, X, Z)

- +/- 1/8” Variance all Dimensions

TITAN 2014 / 2015 CATALOGUE 161

PLATES & ATTACHMENTS
GROUSER BAR

Suggested Size Selection Charts

CATERPILLIAR INTERNATIONAL
TRACTOR MODEL SUGGESTED BAR SIZE TRACTOR MODEL SUGGESTED BAR SIZE

D2 (all), D3, D4 (all), 931, 933, 941, 955 L T340, TD6, TD7, TD8, TD9, 100 Loader,
D5 (all), D6, 561, 951, 955 K & L, 977 A, E 125 Loader, 150 Loader L
D6C, D7 (all), 571A, 572, 977 L, K, A, E TD14, TD15, TD18, TD20 (all),
D8, 583, 983 C, G, H 175 Loader, 250 L, K ,A, E
D8H, D8K, D8N, D8R C, G, H TD24, TD25 (all), TD30, TD40,
D8L, D9, D9G, D9H T, H, S, J, M 100 Loader, 125 Loader, 150 Loader T, C, G, H, S, J, M, P
D9L, D10N P, S, M
DL9, D10N P, S, T CASE
D10L, D11 R, X, P TRACTOR MODEL SUGGESTED BAR SIZE

ALLIS-CHALMERS 310 (all), 350, 420B, 450, 520 L

600B, 750 800, 850, 1000, 1010,
TRACTOR MODEL SUGGESTED BAR SIZE K, A, E
1150, 1550
HD3, HD4, HD6, HD7G L, A, E
HD9, HD11, HD11B, HD11EP A, E
JOHN DEERE
HD15, HD16, HD16B, HD16DP K, E
TRACTOR MODEL SUGGESTED BAR SIZE
HD19, HD20, HD21, HD21B E, K, T, C, G, H, S, J
HD41, HD41B T, S, M, P, R 350, 350B, 420, 430, 440, 1010, 2010 L
450, 450B, 555, 850 K, A, E

TEREX / DEMAG
TRACTOR MODEL SUGGESTED BAR SIZE KOMATSU
TRACTOR MODEL SUGGESTED BAR SIZE
C6, 8230 (all), 8240 (all) L, K, A, E
TC12, 8280 C, G, H D41, D50, D53, D55, D58, D63 L, A
8250 T, H, S, J, M D60, D65, D68, D75, D80 ,D83, D85 K, E
D135, D155, D155AX G, H, S, T
D275, D335, D375A-1 J, M, P
D375A-2 M, P
D475A-2 R, X

Number of Pads Per Tractor

66 68 70 72 74 76 78 80 82 84 90 92 94

36” 22 23 24 24 25 26 26 27 28 28 30 31 32
30” 17 17 18 18 19 19 20 20 21 21 23 23 24
28” 17 17 18 18 19 19 20 20 21 21 23 23 24 Chart Figures
Tractor Pad Width

27” 17 17 18 18 19 19 20 20 21 21 23 23 24 Indicate minimum

numbers of 10-foot
26” 17 17 18 18 19 19 20 20 21 21 23 23 24 lengths of grouser
24” 14 14 14 15 15 16 16 16 17 17 18 19 19 retread bar required
22” 14 14 14 15 15 16 16 16 17 17 18 19 19
20” 11 12 12 12 13 13 13 14 14 14 15 16 16
20” 11 12 12 12 13 13 13 14 14 14 15 16 16

162 TITAN 2014 / 2015 CATALOGUE

SWEEPER PARTS
BROOMS & WAFERS

Street Sweeping - Tube Brooms

We construct our tube brooms with our ends per square inch of broom face for
own virgin polypropylene filament for consistent sweeping results. Compare our
better “flick action.” Combined with more filament weight with the cheaper brooms,
wraps than the average broom, our tube and you will see why United Rotary Brush
broom provides you with more sweeping Tube Brooms are the right choice.

Model Part number Length

Allianz MS/MT 350 21-083658MOPVD 58”

Athey Mobil 21-083658MOP 58”
Elgin Broom Bear 21-083658MOP 58”
Elgin Broom Bear 21-083660EAP 60”
Debris Flow
Elgin Eagle 21-083660EAP 60”
Broom Basics Tip!
Elgin Pelican 21-083666ELP 66”
Proper speed reduces stress to the
Conveyor Belt
Elgin Road Wizard 21-083660EAP 60”
broom. If you piles up in front of the broom
Johnston 3000/4000 21-053256VNP 56.5”
causing you to bulldoze instead of sweep.
Gutter Broom
Schwarze M5000 21-083658MOP 58”
This can damage not only the broom, but
Schwarze M6000 21-083658MOP 58”
also the core, chains, sprockets, drive lines
Main Broom Tennant 830 21-082450TEP 50”
and frame.
Tennant Centurion 21-083668TEP 68”

Small Diameter Tube Brooms

For Vac-U-Sweep applications, we offer sweep the debris in front of the small
our small diameter tube brooms. These diameter agitation broom, as the vacuum
brooms are not intended for sweeping, head picks up the debris.
but are used for agitation. Gutterbrooms
Model Part number Length Broom Basics Tip!
Elgin Crosswind 21-021078CRP 78” “Flick Action” is the movement of the
Elgin GeoVac 21-021660WWP 60” broom bristle when in use. Each strand
Elgin Whirlwind 21-021660WWP 60” “flicks” as the broom rotates. Flicking of
Elgin Whirlwind MV 21-021654ELP 54” the filament is required for best sweeping
Johnston 400 21-041248ECP 48” results. If you are flicking, you are sweep-
Johnston 600 21-041552JOP 52.5” ing, if you are not flicking, you are plowing
Johnston 650 21-041551JOP650 51” or pushing.
Tymco 600 21-021279TYP 79”
Vac/All 21-021640LVP 40”
Vactor 780 21-041958SUPDZ 58”

TITAN 2014 / 2015 CATALOGUE 163

SWEEPER PARTS
BROOMS & WAFERS

Poly & Wire Wafers

5” X 15” Wafers Part number When your street sweeper application calls
Poly Flat 01-050150PW
for wafers, we carry 5” x 15” flat wafers,
Wire Flat 06-050150WW
available in poly or wire filament. United
Spacer 15-SPACER-5
Rotary Brush also offers 10” x 36” wafers
in poly and wire, both available in flat and
10” X 36” Wafers Part number convoluted. Wafer combinations in poly
Poly Flat 01-100360PW
and wire filaments allow you the flexibility
Wire Flat 06-100360WW
to customize your broom to meet specific
Spacer 15-SPACER10
sweeping conditions.
Poly Convoluted 04-100360PC
Wire Convoluted 09-100360WC

Street Sweeping - Strip Brooms

Our mandrel design directs the debris available in regular (18) or heavy duty
towards the center of the sweeping path (21) strips per set.
to prevent streaking and promote center Every UnitedPro Strip is constructed of
hopper loading. This reduces elevator wear 100% polypropylene. They are also 100%
and the need for constant adjustments. recyclable. Check with your local recycling
The UnitedPro Strips are easy to install and center to see if they will accept worn
replace. The strips easily slide in and out UnitedPro Strips.
of your core, reducing downtime. Strips are

Model Part Number Length Number per Set Core Number Mandrel Number

Johnston 3000/4000 20-130565AP 56.5” 13 27-APC565 N/A

Athey Mobil 20-130580AP 58” 18 27-APC58 27-AP58
Elgin Broom Bear 20-130580AP 58” 18 27-APC58 27-AP58
Elgin Eagle 20-130600AP 60” 18 27-APC60 27-AP60
Elgin Pelican 20-130660AP 66” 18 27-APC66 27-AP66
Elgin Road Wizard 20-130600AP 60” 18 27-APC60 27-AP60
Schwarze M5000 20-130580AP 58” 18 27-APC58 27-AP58
Schwarze M6000 20-130580AP 58” 18 27-APC58 27-AP58
Athey Mobil 20-120580AP 58” 21* 27-APC2158 N/A
Elgin Broom Bear 20-120580AP 58” 21 * 27-APC2158 N/A
UnitedPro Strips fit in compact boxes, reducing
Elgin Eagle 20-120600AP 60” 21 * 27-APC2160 N/A
shipping costs up to 60% and more over tube brooms.
Also the packaging of strip brooms make them easy to Elgin Pelican 20-120660AP 66” 21* 27-APC2166 N/A
stack and store. Elgin Road Wizard 20-120600AP 60” 21 * 27-APC2160 N/A
Schwarze M5000 20-120580AP 58” 21 * 27-APC2158 N/A
Schwarze M6000 20-120580AP 58” 21* 27-APC2158 N/A
Tennant Centurion 20-120680AP 68” 21 * 27-APC2168 N/A

* UnitedPro strips are available in 21 strips per set for heavy-duty sweeping.

A mandrel is a hollow tube that slides onto Cores have drive plates welded in each
the broom arbor. A mandrel is used on a end. The drive plates are what allows
municipal street sweeper when converting the core to be mounted to the machine.
from a tube broom to a strip broom. Cores can either be 18 rows for standard
Mandrels are 18 rows. sweeping or 21 rows for heavy-duty
sweeping.

164 TITAN 2014 / 2015 CATALOGUE

SWEEPER PARTS
BROOMS & WAFERS

Street Sweeping - Blue Steel Gutter Brooms

Proven, Powerful Performance. Model Part number Model Part number

Thanks to revolutionary new technology, Allianz MS/MT 350 41-PATWAP4 Masco 41-PWMAW1626
United Rotary Brush’s Blue Steel patented, Athey Mobil 41-PATMOP4 Night Hawk 41-PATWWP2
cold rolled wire delivers the same durability Elgin Broom Bear 41-PATELP5 Schwarze A4000 41-PATELP4
and long broom life you expect to find only Elgin Crosswind 41-PATWWP2 Schwarze A7000 41-PATELP5
in oil tempered wire. After nearly two years Elgin Crosswind 41-PATELP4 Schwarze A8000 41-PATELP5
of rigorous testing, we’ve established that Elgin Crosswind J 41-PATELP5 Schwarze A9000 41-PATELP5
Blue Steel delivers the same - if not better - Elgin Eagle 41-PATELP5 Schwarze M5000 41-PATELP5
performance as oil tempered wire. Elgin GeoVac 41-PATWWP2 Schwarze M6000 41-PATELP5
Elgin Pelican 41-PATELP4 Schwarze 333 41-PATWWP2
Superior Quality at Superior Value. Elgin Road Wizard 41-PATELP5 Schwarze 340 Series 41-PATELP420

The innovative manufacturing process Elgin Whirlwind 41-PATWWP2 Tennant 830 41-PATTEW1
used to produce Blue Steel is so efficient, Elgin Whirlwind MV 41-PATWWP2 Tennant Centurion 41-PATELP5
we really can deliver superior performance Elgin Whirlwind MV 41-PATELP4 Tymco 210 41-PATELP420
in the cold rolled price range. Johnston 400 41-PATJOW113 Tymco 435 41-PATELP4
Johnston 600 41-PATJOW116 Tymco 600 41-PATMOP4

Easy on the Environment. Johnston 650 41-PATWWP2 Vac/All 41-PATVAW1

Johnston 3000/4000 41-PATFMP12 Vac/All 41-PATVAW3
Because Blue Steel is manufactured
Johnston 3000/4000 41-PATWAP4 Victory Sweeper 41-PATELP420
without oil tempering, it is a more environ-
mentally-friendly product. Plus, there are
no harmful by-products to leach into water Broom Basics Tip!
supplies and soil. To maintain optimum performance, replace your gutter broom when the strands reach
one-half their original length. This measurement is equal to approximately 5 inches.

Street Sweeping - Gutter Broom Segments

Our industry’s sweepers utilize several dif- your specific replacement gutter broom
ferent types of blocks or segments. United requirements.
Rotary Brush Corporation can help you with

80-MOPN 80-ELWWP 80-WAPNA

Mobil Athey/Tymco Style Elgin Whirlwind Wayne Block
Block 30 holes 32 holes
35 holes

80-ELPN 80-QPN 80-SBIPN

Elgin/Tymco Style Quickie Block SBI Block
Block 12 holes 12 holes
31 holes

TITAN 2014 / 2015 CATALOGUE 165

SWEEPER PARTS
BROOMS & WAFERS

Road Building - Tube Brooms

Professionals who understand the value of Model Part number Length
quality products make United Rotary Brush Broce 8’ 22-083296CTP 8 5/8” x 96”
their first choice for quality-built Tube Broce 8’ 22-103291CTP 10” x 91”
Brooms. Our Tube Brooms give you better Challenger 7’ l & II 22-083678CTPRB 8 5/8” x 77 1/2”
sweeping coverage with more broom Rosco RB48 22-083290CTP 8 5/8” x 90”
wraps and more sweeping ends than our Rosco RB48 22-103291CTP 10” x 91”
competitor’s tube brooms, for impressive Rosco Sweep Pro 22-083290CTPRB 8 5/8” x 90”
sweeping results. Waldon SweepMaster 22-103288CTP 10” x 88”
Rosco 8’ Challenger II 22-083689CTPRB 8 5/8” x 89”

Proper Down Pressure

Improper downward pressure can decrease To check for correct down pressure, operate
broom life up to 95%. A broom sweeps with the broom on the ground and rotate at normal
the tips of its bristles. When too much down operating speed with the machine remaining
pressure is applied, the broom is no longer using stationary, then stop and lift the sweeping
its tips; the broom is now working with the sides assembly. The correct sweeping path of a
of the bristles. This limits the flicking action of properly adjusted broom will clear a 2” - 4”
the bristles, limits its sweeping effectiveness and wide pattern.
shortens the life of the broom.

Road Building - Poly & Wire Wafers

Model Wafer Size

Catepillar 8 1/8” x 26”

Catepillar 10” x 27”
Catepillar 10” x 36”
Balderson 7 1/8” x 24”
Bobcat 6 3/8” x 21 3/8”
Bobcat 10” x 32”
Broce 6 3/8” x 24”
Broce 10” x 32”
Holder 10” x 32”
Kubota 6 3/8” x 24”
Lay-Mor 6 3/8” x 24”
United Rotary Brush offers a wide variety conditions. Understanding your needs
M-B 6 3/8” x 24”
of wafers in poly, wire or combination will help your United Rotary Brush
M-B 10” x 32”
and flat, or our best value, spacerless Representative help you select the right
Rosco 10” x 32”
convoluted for the road building and wafer for your specific application.
Sweepster 6 3/8” x 24”
attachment industry. Installing our
Sweepster 8 1/8” x 26”
quality-built wafers provide long lasting - Road Construction Sweepster 10” x 32”
durability which results in longer broom - Landscaping Superior Broom 10” x 32”
life. Knowing yoursweeping requirements
- Parking Lot/Street Sweeping Terramite 6 3/8” x 24”
is the first step in choosing the right
wafer for the job. A few things to consider - Construction Debris Clean Up Waldon Sweepmaster 10” x 32”

would be the type of debris you will be - Light Snow Removal

sweeping, the type of substrate conditions - Universities and Hospitals
you will encounter, as well as the weather - Pathways and Trails

Broom Basics Tip!

A general rule of thumb to determine the number of wafers needed is 7 flat wafers per
foot or 6 convoluted wafers per foot.

166 TITAN 2014 / 2015 CATALOGUE

SWEEPER PARTS
BROOMS & WAFERS

Road Building - Poly & Wire Wafers

Whether you are in road construction, the - Self-Contained
landscaping business or responsible for - Skid Steer Loaders
the upkeep of your city or county’s parks - Tow Behinds
and recreation system, and whether the - Tractors
application calls for sweeping debris to
- Mowers
light snow removal, United Rotary Brush
has the wafers you need to fit most - Loader Backhoes
machines. - Walk Behind Sweepers

Broom Basics Tip!

Our convoluted wafers provide the best valuedue to our spacerless design. Convoluted
wafers are more environmentally friendly, as there is less waste disposal and are easy to
install. For normal sweeping applications , install wafers rotating 180 ˚. For a dense pack,
install wafers on cores with 4 drive bars at 90˚. This application does require the purchase
of more wafers.

6 3/8” x 21 3/8” Wafers Part Number 7 1/8” x 24” Wafers Part Number 10” x 32” Wafers Part Number

Poly Convoluted* 04-063213PC Poly Flat 01-071240PW Poly Flat 01-100320PW

Wire Convoluted* 09-063213WC Wire Flat 06-071240WW Wire Flat 06-100320WW
Spacer 15-SPACER718 Combo Flat 12-100320CW
6 3/8” x 24” Wafers Part Number Spacer 15-SPACER10

Poly Flat 01-063240PW 8 1/8” x 26” Wafers Part Number Poly Convoluted* 04-100320PC

Wire Flat 06-063240WW Poly Convoluted* 04-081260PC Wire Convoluted* 09-100320WC

Spacer 15-SPACER638 Wire Convoluted* 09-081260WC Combo Convoluted* 12-100320CC

Poly Convoluted* 04-063240PC Combo Convoluted* 12-081260CC

10” x 36” Wafers Part Number
Wire Convoluted* 09-063240WC
Combo Convoluted* 12-063240CC 10” x 27” Wafers Part Number Poly Flat 01-100360PW

Poly Flat 01-100270PW Wire Flat 06-100360WW

Wire Flat 06-100270WW Spacer 15-SPACER10

Spacer 15-SPACER10
Standard Package Sizes are 24/Box and 28/Box
* Better Value

TITAN 2014 / 2015 CATALOGUE 167

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

CONICAL BITS (pg. 127-139) CUTTING EDGES (pg. 117-124)

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

C21HD BIT CONICAL 1010789 KENNAMETAL 419815A120 EDGE 114X13X23.219 DBFH END 1P BLACKCAT BLADES
C23 BIT CONICAL 1010758 KENNAMETAL 4218153210 EDGE 114X13X51.3 DBFH 78CP BLACKCAT BLADES
C855LR BIT CONICAL 1011001 - Grader KENNAMETAL 424815A140 EDGE 114X13X66-13/16 DBFH 78P BLACKCAT BLADES
C87DSSR BIT CONICAL 1010935 - Grader KENNAMETAL 4218153220 EDGE 114X17.9X11.2 END 78CP BLACKCAT BLADES
DS05 BIT CONICAL 1918738 KENNAMETAL 4T6380 EDGE 118X13X2912 DBFH 1P END BLACKCAT BLADES
T8 BIT CONICAL 4065449 T8X KENNAMETAL 6Y5540 EDGE 118X13X3112 DBFH 1P BLACKCAT BLADES
C87KCSBSR BIT CONICAL (maximum duty) 1010937 / K3560 KENNAMETAL 4T6378 EDGE 118X13X3512 DBFH 1P BLACKCAT BLADES
RS19 BIT CONICAL (1991004) KENNAMETAL 4T6381 EDGE 118X13X5314 DBFH 1P CTR BLACKCAT BLADES
RP15 BIT CONICAL (C3HD1/M2N) KENNAMETAL 4T2896 EDGE 118X16X5614 DBFH 1P CTR BLACKCAT BLADES
RP01 BIT CONICAL (F3W/C3WH397) KENNAMETAL 4T3444 EDGE 118X16X6218 DBFH 1P CTR BLACKCAT BLADES
RP06 BIT CONICAL (M4/M4W) KENNAMETAL D32189SER EDGE 118X16X74 DBFH 114P SERR BLACKCAT BLADES
C87WFRKCSB BIT CONICAL (maximum duty) 2041786 KENNAMETAL 1399230 EDGE 1316X14.17X50.5 DBFH 1P BLACKCAT BLADES
C3LR BIT CONICAL (RL08) KENNAMETAL 1U0593 EDGE 1316X14.17X51.875 DBFH BLACKCAT BLADES
C1HDSR BIT CONICAL (RL10) KENNAMETAL 1006668 EDGE 1316X14.17X55.1 DBFH 114P BLACKCAT BLADES
C387LR BIT CONICAL (SL02) KENNAMETAL 1004043 EDGE 134X1038X22 DBFH 114P BLACKCAT BLADES
C31HD BIT CONICAL (U40KHD) KENNAMETAL 9W9702 EDGE 134X16X35.75 DBFH 1P END BLACKCAT BLADES
C87HDRP BIT CONICAL 3837213 KENNAMETAL 9W9702OF EDGE 134X19X35.75” DBFH 1P BLACKCAT BLADES
C4 1 BIT CONICAL 6.36” TALL 1010776 KENNAMETAL 9W9701OF EDGE 134X22X71.75” DBFH 1P BLACKCAT BLADES
C1002443SB BIT CONICAL EXTREME DUTY (23F) KENNAMETAL 1099215 EDGE 138X10X24.5 DBFH 34P BLACKCAT BLADES
C3KBF BIT CONICAL FLARED (RC2-01P) KENNAMETAL 7T9125 EDGE 138X13X3112 DBFH 1P END BLACKCAT BLADES
C387BF BIT CONICAL FLARED (SM02) KENNAMETAL D28009 EDGE 138X16X26.937 DBFH 114P BLACKCAT BLADES
C855HDX BIT CONICAL HD BLUNT 1011206 KENNAMETAL 9W0775 EDGE 138X16X29.875 DBFH 114P BLACKCAT BLADES
C855HDX-4 BIT CONICAL HD BLUNT (SB4TS) KENNAMETAL 2752490 EDGE 138X16X36.3 DBFH 114CP BLACKCAT BLADES
C858KCSB BIT CONICAL MAX DUTY 1010880 KENNAMETAL 1004046 EDGE 138X16X51.875 DBFH 114P BLACKCAT BLADES
CMM4 BIT CONICAL W/SNAP RING (CM42) KENNAMETAL 1099212 EDGE 138X16X57 DBFH 114P BLACKCAT BLADES
BR1 BIT CUTTING 1800063 KENNAMETAL 1U0761 EDGE 158X1038X22 DBFH 114P BLACKCAT BLADES
RT2 BIT CUTTING 7/8” WIDTH CARBIDE 1844257 KENNAMETAL 7J2959 EDGE 158X13X3512 DBFH 1P END BLACKCAT BLADES
AR15087 BIT CUTTING CARBIDE EDGED 1012240 KENNAMETAL 9J5899 EDGE 158X16X62.125 DBFH 1CP BLACKCAT BLADES
KB250 BIT CUTTING CARBIDE EDGED 1012238 KENNAMETAL 9W4394 EDGE 158X16X68.125 DBFH 1-1/4P BLACKCAT BLADES
C10 BLOCK (Road Planer) 1012278 KENNAMETAL 902512 EDGE 1916X234X10X12 HALF ARROW BLACKCAT BLADES
C30 BLOCK (Road Planer) 1012279 KENNAMETAL T146673 EDGE 1X10X41.5 DBFB 3/4CP BLACKCAT BLADES
C10HD BLOCK (.750 SHANK BITS ONLY!!) KENNAMETAL T157492 EDGE 1X10X44.25 DBFH 34P BLACKCAT BLADES
C10AMC BLOCK (FOR USE WITH C10AMLG) KENNAMETAL 4T2994 EDGE 1X10X4734 DBFH 1P BLACKCAT BLADES
C30H BLOCK (U40H) KENNAMETAL 2296958 EDGE 1X10X63.125 DBFB BOLT ON BLACKCAT BLADES
C4BLOCK BLOCK (U43H) KENNAMETAL 1U1465 EDGE 1X11X31 DBFH 1P BLACKCAT BLADES
C20 BLOCK (U43NS) KENNAMETAL 7T6936 EDGE 1X11X35.938 DBFH 78P BLACKCAT BLADES
C87GB BLOCK GROOVED (.87 SHANK BITS) KENNAMETAL 7T6678 EDGE 1X11X3514 DBFH 78P BLACKCAT BLADES
3X34HD CONICAL BOARD 114X5X36 [Link] KENNAMETAL 1U0295 EDGE 1X11X4038 DBFH 1P BLACKCAT BLADES
3X58HD CONICAL BOARD 114X5X36 [Link] KENNAMETAL 7T6589 EDGE 1X11X43 DBFH 78P BLACKCAT BLADES
4X34HD CONICAL BOARD 114X5X48 [Link] KENNAMETAL 8E4567 EDGE 1X11X4312 DBFH 1P BLACKCAT BLADES
4X58HD CONICAL BOARD 114X5X48 [Link] KENNAMETAL 1073746 EDGE 1X11X46.563 DBFH 1P BLACKCAT BLADES
QC110H HOLDER (FOR USE WITH QC110B) KENNAMETAL 1104711 EDGE 1X11X47.25 DBFH 1p BLACKCAT BLADES
QC110HD HOLDER-HD (USE WITH QC100) KENNAMETAL 110458098 EDGE 1X13.78X63.93 DBFH 34CP BLACKCAT BLADES
KRP4 PLIERS KENNAMETAL T167828 EDGE 1X14X47.5” DBFH 1”P BLACKCAT BLADES
C30HP PULLER PULLER HAMMER TYPE BLUE HANDLE KENNAMETAL T146672 EDGE 1X14X8.12 CAST 3/4P BLACKCAT BLADES
C123 PULLER PULLER HAMMER TYPE GREEN KENNAMETAL 110458080 EDGE 1X18.17X24.56 DBFH 34P BLACKCAT BLADES
KHP2 PUNCH HAMMER CURVED HAND KENNAMETAL 4T8091 EDGE 1X614X13.563 DBFH 1P END BLACKCAT BLADES
367M LUTE ASPHALT COMPLETE (1-1/8) SEYMOUR MIDWEST 4T2952 EDGE 34X10X3112 DBFH 34P END BLACKCAT BLADES
T187987 EDGE 34X10X36 DBFH 34P BLACKCAT BLADES
CUTTING EDGES (pg. 117-124) 4T3901 EDGE 34X10X43 DBFH 78P BLACKCAT BLADES
ITEM DESCRIPTION VENDOR T187988 EDGE 34X10X47-7/8” DBFH 34P BLACKCAT BLADES
2194599 EDGE 34X10X57.7 DBFH 34CP BLACKCAT BLADES
T84194HT BUCKET EDGE 34X8X92.375 58CP BLACKCAT BLADES 110128873 EDGE 34X11X57 DBFH 58P BLACKCAT BLADES
T157311 BUCKET EDGE-544H 1” CTR 34P BLACKCAT BLADES 11156585 EDGE 34X280X1473.2mm DBFH 58P BLACKCAT BLADES
9W6657 DOZER EDGE D10-END BLACKCAT BLADES 3468H EDGE 34X6X96 SBFH WELD ON BLACKCAT BLADES
1547011314 DOZER EDGE-D80/85-1” BLACKCAT BLADES T204082 EDGE 34X8X35.875 DBFH 34CP BLACKCAT BLADES
424815A130 EDGE 114X13X22-5/8 DBFH 78P BLACKCAT BLADES T204083 EDGE 34X8X40.875 DBFH 34CP BLACKCAT BLADES

168 TITAN 2014 / 2015 CATALOGUE

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

CUTTING EDGES (pg. 117-124) CUTTING EDGES (pg. 117-124)

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

9W8215 EDGE 34X8X44.5 DBFH 5/8P BLACKCAT BLADES 6Y5839 END BIT D3/D4 RH BLACKCAT BLADES
3G4282 EDGE 34X8X4538 DBFH 34P BLACKCAT BLADES 4T6506 END BIT D7-A/S/U-FLAT LH BLACKCAT BLADES
D45557 EDGE 34X8X58.375 DBFB 34P BLACKCAT BLADES 4T6505 END BIT D7-A/S/U-FLAT RH BLACKCAT BLADES
4T3009 EDGE 34X8X59-7/8 DBFH 34P CTR BLACKCAT BLADES 8E4194 END BIT D8N-ASU 1-5/8” LH CAST BLACKCAT BLADES
4T2315 EDGE 34X8X6114 DBFH 34P BLACKCAT BLADES 8E4193 END BIT D8N-ASU 1-5/8” RH CAST BLACKCAT BLADES
4T30096 EDGE 34X8X65-7/8 DBFH 34P CTR BLACKCAT BLADES 8E4198 END BIT D9L-U 2” LH CAST BLACKCAT BLADES
86577169 EDGE 34X8X71.875 DBFC 58P BLACKCAT BLADES 8E4199 END BIT D9L-U 2” RH CAST BLACKCAT BLADES
H439029 EDGE 34X8X73.23” DBFC 58CP BLACKCAT BLADES 1507021356 END BIT-D85-LH-11/4” BLACKCAT BLADES
1359396PB8W EDGE 34X8X74.625 DBFH BOLT ON BLACKCAT BLADES 1507021346 END BIT-D85-RH-11/4” BLACKCAT BLADES
3488H EDGE 34X8X96 SBFH WELD ON BLACKCAT BLADES 4J8665 ROUTER BIT BLACKCAT BLADES
1359396PB EDGE 58X6.5X74.625 DBFB 58P BLACKCAT BLADES 7J3023 ROUTER BIT BLACKCAT BLADES
1955124PB EDGE 58X6.5X85.826 DBFH 58CP BLACKCAT BLADES 9W4509 SCRAPER EDGE 651/657 BLACKCAT BLADES
4T6232 EDGE 58X612X4734 DBFH 58P BLACKCAT BLADES T156530HANC SEGMENT CTR 1/2 ARROW CAST BLACKCAT BLADES
5866 EDGE 58X6X72 SBFC WELD ON BLACKCAT BLADES 1744114B SEGMENT CTR 1/2 ARROW CAST B/O BLACKCAT BLADES
5866H EDGE 58X6X72 SBFH WELD ON BLACKCAT BLADES 1744115B SEGMENT CTR 1/2 ARROW CAST B/O BLACKCAT BLADES
5868H EDGE 58X6X96 SBFH WELD ON BLACKCAT BLADES 2174727B SEGMENT CTR 1/2 ARROW CAST B/O BLACKCAT BLADES
BOB6715464 EDGE 58X8X100 DBFC 58CP BLACKCAT BLADES 1099019 SEGMENT CTR DBFH EDGE B/O BLACKCAT BLADES
BOB6718007 EDGE 58X8X74 DBFC 58P BLACKCAT BLADES 2174726B SEGMENT END 1/2 ARROW CAST BLACKCAT BLADES
D35840 EDGE 58X8X76 DBFH 58CP BLACKCAT BLADES T156530HANL SEGMENT LH 1/2 ARROW CAST 114P BLACKCAT BLADES
BOB6718008 EDGE 58X8X80 DBFH 58P BLACKCAT BLADES 1167462B SEGMENT LH 1/2 ARROW CAST B/O BLACKCAT BLADES
BOB6727317 EDGE 58X8X88 DBFC 58CP BLACKCAT BLADES AT139622HAL SEGMENT LH END 1/2 ARROW CAST BLACKCAT BLADES
4T6612 EDGE 78X13X2912 DBFH 1P END BLACKCAT BLADES T156530HANR SEGMENT RH 1/2 ARROW CAST 114P BLACKCAT BLADES
4T6568 EDGE 78X16X5614 DBFH 1P CTR BLACKCAT BLADES 1167461B SEGMENT RH 1/2 ARROW CAST B/O BLACKCAT BLADES
5868 EDGE SBFC063X06X096 WELD ON BLACKCAT BLADES AT139622HAR SEGMENT RH END 1/2 ARROW CAST BLACKCAT BLADES
11156579 END 34X367X531.8mm DBFH 58P BLACKCAT BLADES 700062 SLOPER 118X16X62 DBFH SERR 1P BLACKCAT BLADES
3G8316 END BIT 1.25X11.53X20.91 LH 78 BLACKCAT BLADES 720062 SLOPER 118X16X62 DBFH SERR 1P BLACKCAT BLADES
3G8315 END BIT 1.25X11.53X20.91 RH 78 BLACKCAT BLADES 710064NS SLOPER 118X16X64 DBFH NON 1P BLACKCAT BLADES
9W6198 END BIT 1.375X13X24 LH 78P BLACKCAT BLADES 710064 SLOPER 118X16X64 DBFH SERR 1P BLACKCAT BLADES
9W6199 END BIT 1.375X13X24 RH 78P BLACKCAT BLADES 700068NS SLOPER 118X16X68 DBFH NON 1P BLACKCAT BLADES
AT139622 END BIT 112X9.5X22 DBFH 114P BLACKCAT BLADES 720068NS SLOPER 118X16X68 DBFH NON 1P BLACKCAT BLADES
T167829 END BIT 114X19X9 DBFH 1”P BLACKCAT BLADES 700068 SLOPER 118X16X68 DBFH SERR 1P BLACKCAT BLADES
8E5529 END BIT 14G 3/4”P BLACKCAT BLADES 720068 SLOPER 118X16X68 DBFH SERR 1P BLACKCAT BLADES
6Y2805 END BIT 14G/16G 3/4”P 8HOLES BLACKCAT BLADES 700074NS SLOPER 118X16X74 DBFH NON 1P BLACKCAT BLADES
1004044 END BIT 158X8X22 DBFH 114P BLACKCAT BLADES 720074NS SLOPER 118X16X74 DBFH NON 1P BLACKCAT BLADES
9W8875 END BIT 1X10X18.375 LH D6 34P BLACKCAT BLADES 720074 SLOPER 118X16X74 DBFH SERR 1P BLACKCAT BLADES
9W8874 END BIT 1X10X18.375 RH D6 34P BLACKCAT BLADES 710088NS SLOPER 118X16X88 DBFH NON 1P BLACKCAT BLADES
T190175 END BIT 1X10X18.94 DBFH LH 34P BLACKCAT BLADES 710088 SLOPER 118X16X88 DBFH SERR 1P BLACKCAT BLADES
T190174 END BIT 1X10X18.94 DBFH RH 34P BLACKCAT BLADES 510062 SLOPER 78X13X62 DBFH SERR 1P BLACKCAT BLADES
8E9378 END BIT 1X8X18.5 DBFH LH 34P BLACKCAT BLADES
8E9379 END BIT 1X8X18.5 DBFH RH 34P BLACKCAT BLADES GRADER BLADES (pg. 109-110)
T187244 END BIT 3/4” LH FLAT BLACKCAT BLADES ITEM DESCRIPTION VENDOR
T187243 END BIT 3/4” RH FLAT BLACKCAT BLADES
T216392 END BIT 3/4” RH HC 3/4”P BLACKCAT BLADES CIJB873675-ACI GRADER BLADE 1X7X36 SBCCI 34P BLACKCAT BLADES
T216391 END BIT 34 HC 34P LH BLACKCAT BLADES CIJB873645-ACI GRADER BLADE 1X7X36 SBCCI 58P BLACKCAT BLADES
T216394 END BIT 34 HC 34P LH BLACKCAT BLADES CIJB874875-ACI GRADER BLADE 1X7X48 SBCCI 34P BLACKCAT BLADES
T216395 END BIT 34 HC 34P RH BLACKCAT BLADES CIJB874845-ACI GRADER BLADE 1X7X48 SBCCI 58P BLACKCAT BLADES
11011413 END BIT 34X14.4X20.5 DBFH 58P BLACKCAT BLADES 4T2233 GRADER BLADE 1X8X7 DBCH 34P BLACKCAT BLADES
T223520 END BIT 34X8X12.30 DBFH LH 34P BLACKCAT BLADES 4T2236 GRADER BLADE 1X8X8 DBCH 34P BLACKCAT BLADES
T223519 END BIT 34X8X12.30 DBFH RH 34P BLACKCAT BLADES 7T3495 GRADER BLADE 1X8X8 DBFH 34P BLACKCAT BLADES
T120978 END BIT 34X8X12.9 DBFC 34CP BLACKCAT BLADES HWG48 GRADER BLADE 34X6X48 CAST BLACKCAT BLADES
4T3042 END BIT 34X8X14.89 FLAT LH 34P BLACKCAT BLADES 1093124 GRADER BLADE 34X8X4 DBCH 34P BLACKCAT BLADES
4T3041 END BIT 34X8X14.89 FLAT RH 34P BLACKCAT BLADES 9W6252 GRADER BLADE 34X8X5 DBCH 58P BLACKCAT BLADES
T204081 END BIT 34X8X16.437 LH LVL CUT BLACKCAT BLADES 4T3034 GRADER BLADE 34X8X5 DBFH 58P BLACKCAT BLADES
T204080 END BIT 34X8X16.437 RH LVL CUT BLACKCAT BLADES 7D1576 GRADER BLADE 34X8X6 DBCH 34P BLACKCAT BLADES
4T8101 END BIT 955 BLACKCAT BLADES 5D9558 GRADER BLADE 34X8X6 DBCH 58P BLACKCAT BLADES
3G6395 END BIT 966C BLACKCAT BLADES 4T3033 GRADER BLADE 34X8X6 DBFH 34P BLACKCAT BLADES
6Y5840 END BIT D3/D4 LH BLACKCAT BLADES 4T3007 GRADER BLADE 34X8X6 DBFH 58P BLACKCAT BLADES

TITAN 2014 / 2015 CATALOGUE 169

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

GRADER BLADES (pg. 109-110) HARDWARE (pg. 125-126)

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

7D1577 GRADER BLADE 34X8X7 DBCH 34P BLACKCAT BLADES 125X500 BOLT 114X5 PLOW GRADE 8 BLACKCAT BLADES
5D9559 GRADER BLADE 34X8X7 DBCH 58P BLACKCAT BLADES 125X550 BOLT 114X512 PLOW GRADE 8 BLACKCAT BLADES
4T3032 GRADER BLADE 34X8X7 DBFH 34P BLACKCAT BLADES 125X600 BOLT 114X600 PLOW GRADE 8 BLACKCAT BLADES
4T3036 GRADER BLADE 34X8X7 DBFH 58P BLACKCAT BLADES 100X250 BOLT 1X212 PLOW GRADE 8 BLACKCAT BLADES
7D1949 GRADER BLADE 34X8X8 DBCH 34P BLACKCAT BLADES 100X275 BOLT 1X234 PLOW GRADE 8 BLACKCAT BLADES
5D9732 GRADER BLADE 34X8X8 DBCH 58P BLACKCAT BLADES 100X300 BOLT 1X3 PLOW GRADE 8 BLACKCAT BLADES
4T3037 GRADER BLADE 34X8X8 DBFH 34P BLACKCAT BLADES 100X350 BOLT 1X312 PLOW GRADE 8 BLACKCAT BLADES
4T3035 GRADER BLADE 34X8X8 DBFH 58P BLACKCAT BLADES 100X325 BOLT 1X314 PLOW GRADE 8 BLACKCAT BLADES
7D4508 GRADER BLADE 58X6X5 DBCH 58P BLACKCAT BLADES 100X375 BOLT 1X334 PLOW GRADE 8 BLACKCAT BLADES
5D9553 GRADER BLADE 58X6X6 DBCH 58P BLACKCAT BLADES 100X400 BOLT 1X4 GRADE 8 BLACKCAT BLADES
5D9554 GRADER BLADE 58X6X7 DBCH 58P BLACKCAT BLADES 100X450 BOLT 1X412 PLOW GRADE 8 BLACKCAT BLADES
5D9554C20 GRADER BLADE 58X6X7 SBCC 58P BLACKCAT BLADES 750X200 BOLT 34X2 PLOW GRADE 8 BLACKCAT BLADES
8J4043 GRADER BLADE 58X6X8 DBCH 58P BLACKCAT BLADES 750X250 BOLT 34X212 PLOW GRADE 8 BLACKCAT BLADES
9W2329 GRADER BLADE 58X8X4 DBCC 34P BLACKCAT BLADES 750X225 BOLT 34X214 PLOW GRADE 8 BLACKCAT BLADES
9W2328 GRADER BLADE 58X8X4 DBCC 58P BLACKCAT BLADES 750X275 BOLT 34X234 PLOW GRADE 8 BLACKCAT BLADES
9W2330 GRADER BLADE 58X8X5 DBCC 34P BLACKCAT BLADES 750X300 BOLT 34X3 PLOW GRADE 8 BLACKCAT BLADES
7D1158 GRADER BLADE 58X8X7 DBCH 34P BLACKCAT BLADES 750X350 BOLT 34X312 PLOW GRADE 8 BLACKCAT BLADES
5D9561 GRADER BLADE 58X8X7 DBCH 58P BLACKCAT BLADES 750X325 BOLT 34X314 PLOW GRADE 8 BLACKCAT BLADES
8J9821 GRADER BLADE 58X8X8 DBCH 34P BLACKCAT BLADES 750X375 BOLT 34X334 PLOW GRADE 8 BLACKCAT BLADES
5D9731 GRADER BLADE 58X8X8 DBCH 58P BLACKCAT BLADES 750X400 BOLT 34X4 PLOW GRADE 8 BLACKCAT BLADES
4T9603 GRADER BLADE 58X8X8 DBFH 34P BLACKCAT BLADES 750625X225 BOLT 5/8 PLOW GR8 (REDUCER) BLACKCAT BLADES
1004581 ICE BLADE 138X10X8 DBFH 34P T3 BLACKCAT BLADES 625X200 BOLT 58X2 PLOW GRADE 8 BLACKCAT BLADES
4T2233ICE ICE BLADE 1X8X7 DBCH 34P T4 BLACKCAT BLADES 625X250 BOLT 58X212 PLOW GRADE 8 BLACKCAT BLADES
4T2236ICE ICE BLADE 1X8X8 DBCH 34P T4 BLACKCAT BLADES 625X225 BOLT 58X214 PLOW GRADE 8 BLACKCAT BLADES
5D9558ICE ICE BLADE 34X8X6 DBCH 58P T4 BLACKCAT BLADES 750625X275 BOLT 58X234 PLOW (REDUCER)34”H BLACKCAT BLADES
4T3007ICE ICE BLADE 34X8X6 DBFH 58P T4 BLACKCAT BLADES 625X275 BOLT 58X234 PLOW GRADE 8 BLACKCAT BLADES
7D1577ICE ICE BLADE 34X8X7 DBCH 34P T4 BLACKCAT BLADES 625X300 BOLT 58X3 PLOW GRADE 8 BLACKCAT BLADES
5D9559ICE ICE BLADE 34X8X7 DBCH 58P T4 BLACKCAT BLADES 625X350 BOLT 58X312 PLOW GRADE 8 BLACKCAT BLADES
4T3036ICE ICE BLADE 34X8X7 DBFH 58P T4 BLACKCAT BLADES 625X400 BOLT 58X4 PLOW GRADE 8 BLACKCAT BLADES
7D1949ICE ICE BLADE 34X8X8 DBCH 34P T4 BLACKCAT BLADES 875X250 BOLT 78X212 PLOW GRADE 8 BLACKCAT BLADES
5D9732ICE ICE BLADE 34X8X8 DBCH 58P T4 BLACKCAT BLADES 875X275 BOLT 78X234 PLOW GRADE 8 BLACKCAT BLADES
7D4508ICE ICE BLADE 58X6X5 DBCH 58P T4 BLACKCAT BLADES 875X300 BOLT 78X3 PLOW GRADE 8 BLACKCAT BLADES
875X350 BOLT 78X312 PLOW GRADE 8 BLACKCAT BLADES
GROUSER BAR (pg. 159-162) 100 NUT 1 GRADE 8 BLACKCAT BLADES
ITEM DESCRIPTION VENDOR 125 NUT 114 GRADE 8 BLACKCAT BLADES
750 NUT 34 GRADE 8 BLACKCAT BLADES
ACORK3 GROUSER BAR 3” ICE LUG RF BUTLER 625 NUT 58 GRADE 8 BLACKCAT BLADES
KCORK3 GROUSER BAR 3” ICE LUG RF BUTLER 875 NUT 78 GRADE 8 BLACKCAT BLADES
LCORK3 GROUSER BAR 3” ICE LUG RF BUTLER 125WASHER WASHER 114 HARDENED BLACKCAT BLADES
ACORK4 GROUSER BAR 4” ICE LUG RF BUTLER 750WASHER LOCKWASHER 34 [Link] & CO
CCORK4 GROUSER BAR 4” ICE LUG RF BUTLER 625WASHER LOCKWASHER 58 [Link] & CO
KCORK4 GROUSER BAR 4” ICE LUG RF BUTLER 6252H NUT 58 GRADE 2H HEAVY DUTY [Link] & CO
HCORK4HT GROUSER BAR 4” ICE LUG HT RF BUTLER 1FLWASHER WASHER 1 FLAT HARDENED [Link] & CO
TYPEL GROUSER BAR BROWN END RF BUTLER 750FLWASHER WASHER 34 FLAT HARDEN [Link] & CO
TYPEEHT GROUSER BAR DK BLUE/RED END RF BUTLER 625FLWASHER WASHER 58 FLAT HARDENED [Link] & CO
TYPEC GROUSER BAR GREY END RF BUTLER 875FLWASHER WASHER 78 HARDENED [Link] & CO
TYPEK GROUSER BAR ORANGE END RF BUTLER
TYPEGHT GROUSER BAR RED/RED HT RF BUTLER PINS & LOCKS
TYPEHHT GROUSER BAR WHITE/RED HT RF BUTLER ITEM DESCRIPTION VENDOR
TYPEA GROUSER BAR YELLOW END RF BUTLER
65 BUSHING 5/8-3/4 REDUCER BLACKCAT BLADES
HARDWARE (pg. 125-126) 4T4707W LOCK R500 / J700 BLACKCAT BLADES
ITEM DESCRIPTION VENDOR 1757821810P PIN Komatsu BLACKCAT BLADES
1U0739P PIN Caterpillar BLACKCAT BLADES
125X375 BOLT 114X334 PLOW GRADE 8 BLACKCAT BLADES 1U1558P PIN J550 BLACKCAT BLADES
125X450 BOLT 114X412 PLOW GRADE 8 BLACKCAT BLADES 1U4208P PIN J200 BLACKCAT BLADES
125X400 BOLT 114X418 PLOW GRADE 8 BLACKCAT BLADES 23P PIN H&L BLACKCAT BLADES

170 TITAN 2014 / 2015 CATALOGUE

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

PINS & LOCKS SWEEPER BROOMS (pg. 163-167)

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

4T2479P PIN R450 BLACKCAT BLADES P200M1N21 GUTTERBROOM SEGMENT MOBIL NUT UNITED ROTORY
6I6608P PIN J600 BLACKCAT BLADES P200W1N GUTTERBROOM SEGMENT WAYNE NUT UNITED ROTORY
6Y2527P PIN J450/460 BLACKCAT BLADES OILWIRE GUTTERBROOM WIRE, BLUE STEEL UNITED ROTORY
6Y3228P PIN J225 BLACKCAT BLADES 10SPACER SPACER 10” METAL UNITED ROTORY
6Y3394P PIN R450 BLACKCAT BLADES R8536ETB TUBEBROOM POLY ELGIN EAGLE UNITED ROTORY
7T3408P PIN J400 BLACKCAT BLADES 110644SQHD TUBEBROOM POLY GRAVELY HD UNITED ROTORY
8E0468P PIN J450/460 BLACKCAT BLADES H8536MTB TUBEBROOM POLY MOBIL HD UNITED ROTORY
9J2258P PIN J250 BLACKCAT BLADES 06022VN TUBEBROOM POLY VANGUARD UNITED ROTORY
9J2308P PIN J300 BLACKCAT BLADES R8536ETBC TUBEBROOM POLY/WIRE ELGIN UNITED ROTORY
9J2358P PIN J350 / R350 BLACKCAT BLADES H8536MCTB TUBEBROOM POLY/WIRE MOBIL HD UNITED ROTORY
9J6583P PIN R300 BLACKCAT BLADES 107536WHS WAFER 1034X36 WIRE .018 HIGH UNITED ROTORY
9J8442P PIN CATERPILLAR BLACKCAT BLADES 1032WHS WAFER 10X32 .018 WIRE HI-SPEED UNITED ROTORY
P100 PIN 38X214 SPIROL HD BLACKCAT BLADES 1032PC WAFER 10X32 POLY CONVOLUTED UNITED ROTORY
6Y3909PL PIN LONG BLACKCAT BLADES 1032P WAFER 10X32 POLY FLAT UNITED ROTORY
8E0469W WASHER J450 BLACKCAT BLADES 1032PWC WAFER 10X32 POLY/WIRE CONV. UNITED ROTORY
3G9559W WASHER (STAMPED 8E5559W) J550 BLACKCAT BLADES 1032WCHD WAFER 10X32 WIRE CONVOLUTED HD UNITED ROTORY
4T0001W WASHER J200 BLACKCAT BLADES 1032WHD WAFER 10X32 WIRE FLAT HD UNITED ROTORY
3G9609W WASHER J250 BLACKCAT BLADES 1036PC WAFER 10X36 POLY CONVOLUTED UNITED ROTORY
3G9549W WASHER J350 BLACKCAT BLADES 1036P WAFER 10X36 POLY FLAT UNITED ROTORY
6Y9459W WASHER J350 R350 BLACKCAT BLADES 63819PC WAFER 638X19 POLY CONVOLUTED UNITED ROTORY
7T3409W WASHER J400 BLACKCAT BLADES 63819P WAFER 638X19 POLY FLAT UNITED ROTORY
6I6609W WASHER J600 BLACKCAT BLADES 63819WC WAFER 638X19 WIRE, CONVOLUTED UNITED ROTORY
8E5559W WASHER PLASTIC JACKET BLACKCAT BLADES 63821PC WAFER 638X21 POLY CONVOLUTED UNITED ROTORY
8E8469W WASHER PLASTIC JACKET BLACKCAT BLADES 63821P WAFER 638X21 POLY FLAT UNITED ROTORY
0924402496P PIN KOMATSU DRP INDUSTRIES 63821WC WAFER 638X21 WIRE CONVOLUTED UNITED ROTORY
8E2229P PIN R450 DRP INDUSTRIES 63824PWCK WAFER 638X24 COMBO CONVOLUTED UNITED ROTORY
8E2230W WASHER R450 DRP INDUSTRIES 63824PC WAFER 638X24 POLY CONVOLUTED UNITED ROTORY
8E6359W WASHER PLASTIC JACKET DRP INDUSTRIES 63824P WAFER 638X24 POLY FLAT UNITED ROTORY
6Y1205W WASHER R550 DRP INDUSTRIES 63824WC WAFER 638X24 WIRE CONVOLUTED UNITED ROTORY
2530LKR LOCK NON-RATCHET ITR AMERICA 826PC WAFER 8X26 POLY CONVOLUTED UNITED ROTORY
3540LKR LOCK NON-RATCHET ITR AMERICA 826WC WAFER 8X26 WIRE CONVOLUTED UNITED ROTORY
35PNP PIN ESCO ITR AMERICA
P160 PIN PARABOLICS ITR AMERICA TEETH & ADAPTERS (pg. 140-153)
2526P PIN FLEX ITR AMERICA ITEM DESCRIPTION VENDOR
24P PIN FLEX 24 SERIES ITR AMERICA
2530PNP PIN NON-RATCHET ITR AMERICA 2740ZW23B ADAPTER 1”LIP WRAP AROUND BLACKCAT BLADES
5K1459 PIN T WEDGE ITR AMERICA 3G8356B ADAPTER 1-1/2” LIP LH WRAP BLACKCAT BLADES
2TMC45P PIN 45 SERIES TWIST MET METALOGENIA 3G8355B ADAPTER 1-1/2” LIP RH WRAP BLACKCAT BLADES
2MG30PR PIN KIT MG30 SERIES METALOGENIA 3G8354B ADAPTER 1-5/8”LIP WRAP AROUND BLACKCAT BLADES
2MG40PR PIN KIT MG40 SERIES METALOGENIA 1590464B ADAPTER 2”LIP WRAP AROUND W/O BLACKCAT BLADES
2MG5PR PIN KIT MG5 SERIES METALOGENIA D83423B ADAPTER BOTTOM LEG 23 SERIES BLACKCAT BLADES
2MG8PR PIN KIT MG8 SERIES METALOGENIA 1062047HDB BAR CLEAN OUT (815) HEAVY DUTY BLACKCAT BLADES
2TMC45R RETAINER 45 SERIES TWIST MET METALOGENIA 5V4311B BAR COMPACTOR CLEANER BLACKCAT BLADES
2MG40/55RR RETAINER MG40/55 SERIES METALOGENIA 2V7053B CAP COMPACTOR 815 BLACKCAT BLADES
8E7350WNB NOSE WELD ON RIPPER BLACKCAT BLADES
SWEEPER BROOMS (pg. 163-167) 7K6908 PEDESTAL COMPACTOR CAP BLACKCAT BLADES
ITEM DESCRIPTION VENDOR 1358246B PROTECTOR VERTICAL 1-1/8”LIP BLACKCAT BLADES
1U0740B PROTECTOR VERTICAL MODULOK BLACKCAT BLADES
63821PCONE WAFER 638X21 POLY CONCAVE/CONE KEYSTONE 9J9600B PROTECTOR VERTICLE 988 MODULOK BLACKCAT BLADES
AP601318 BRUSH STRIP KIT 13”TRIM ELGIN UNITED ROTORY 9F5124B SHANK SCARIFIER TYPE 2 BLACKCAT BLADES
AP581318 BRUSH STRIP KIT 13”TRIM MOBIL UNITED ROTORY 101B SHANK SCARIFIER TYPE 3 BLACKCAT BLADES
APCC58 CORE 58” MOBIL - FOR STRIPS UNITED ROTORY 6737325 TOOTH BOB6737325 BOBCAT BLACKCAT BLADES
APCC60 CORE 60” ELGIN EAGLE UNITED ROTORY 100CB TOOTH CENTER 100 SERIES PARABOLICS BLACKCAT BLADES
P200E1N GUTTERBROOM SEGMENT ELGIN NUT UNITED ROTORY 200CB TOOTH CENTER 200 SERIES PARABOLICS BLACKCAT BLADES
P200E1N21 GUTTERBROOM SEGMENT ELGIN NUT UNITED ROTORY 1073300FB TOOTH FLARE J300 BLACKCAT BLADES
55010 GUTTERBROOM SEGMENT FMC UNITED ROTORY 1073350FB TOOTH FLARE J350 BLACKCAT BLADES
P200M1N GUTTERBROOM SEGMENT MOBIL NUT UNITED ROTORY 1073450FB TOOTH FLARE J450 BLACKCAT BLADES

TITAN 2014 / 2015 CATALOGUE 171

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

TEETH & ADAPTERS (pg. 140-153) TEETH & ADAPTERS (pg. 140-153)
ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

2085254FB TOOTH FLARE J250 BLACKCAT BLADES MG40H TOOTH HEAVY ABRASION MG40 METALOGENIA
23FLB TOOTH FLARE 23 SERIES H&L BLACKCAT BLADES SER. J400 KINGMET
J400HDAL TOOTH HEAVY DUTY ABRASION J400 BLACKCAT BLADES MH23L TOOTH LONG 23 SERIES H&L METALOGENIA
9N4452B TOOTH HEAVY LONG J450 BLACKCAT BLADES MG8L TOOTH LONG MG8 SERIES J200 KINGMET METALOGENIA
8E4402B TOOTH HEAVY LONG J400 BLACKCAT BLADES MR30P TOOTH RIPPER PENETRATOR R300 METALOGENIA
100LHB TOOTH LEFT HAND 100 SERIES PARABOLICS BLACKCAT BLADES MR35P TOOTH RIPPER PENETRATOR R350 METALOGENIA
200LHB TOOTH LEFT HAND 200 SERIES PARABOLICS BLACKCAT BLADES MR45P TOOTH RIPPER PENETRATOR R450 METALOGENIA
6Y3222B TOOTH LONG J225 BLACKCAT BLADES MR50P TOOTH RIPPER PENETRATOR R500 METALOGENIA
1U3202B TOOTH LONG J200 BLACKCAT BLADES MR35A TOOTH RIPPER TYPE 2 R350 METALOGENIA
1U3252B TOOTH LONG J250 BLACKCAT BLADES MR45A TOOTH RIPPER TYPE 2 R450 METALOGENIA
1U3302B TOOTH LONG J300 BLACKCAT BLADES TMC30E TOOTH ROCK CHISEL J300 METALOGENIA
1U3352B TOOTH LONG J350 BLACKCAT BLADES TMC35E TOOTH ROCK CHISEL J350 METALOGENIA
7T3402B TOOTH LONG J400 BLACKCAT BLADES TMC45E TOOTH ROCK CHISEL J450 METALOGENIA
9W8452B TOOTH LONG J450 BLACKCAT BLADES TMC55E TOOTH ROCK CHISEL J550 METALOGENIA
24B TOOTH LONG 24 SERIES H&L BLACKCAT BLADES TMC60E TOOTH ROCK CHISEL J600 METALOGENIA
X156LB TOOTH LONG CAST PARABOLICS BLACKCAT BLADES MG40E TOOTH ROCK CHISEL MG40 SERIES J400 METALOGENIA
100RHB TOOTH RIGHT HAND 100 SERIES PARABOLICS BLACKCAT BLADES KINGMET
200RHB TOOTH RIGHT HAND 200 SERIES PARABOLICS BLACKCAT BLADES TMC30S TOOTH STANDARD J300 METALOGENIA
9937 TOOTH RIPPER ATECO BLACKCAT BLADES TMC35S TOOTH STANDARD J350 METALOGENIA
4T5452B TOOTH RIPPER TYPE 2 R450 BLACKCAT BLADES TMC45S TOOTH STANDARD J450 METALOGENIA
4T5502B TOOTH RIPPER TYPE 2 R500 BLACKCAT BLADES MC30V TOOTH TIGER J300 METALOGENIA
6Y0309B TOOTH RIPPER TYPE 2 R300 BLACKCAT BLADES MH23V TOOTH TIGER 23 SERIES H&L METALOGENIA
6Y0359B TOOTH RIPPER TYPE 2 R350 BLACKCAT BLADES TMC45V TOOTH TIGER J450/460 METALOGENIA
6Y5230B TOOTH SCARIFIER CATERPILLAR BLACKCAT BLADES MC30W TOOTH TWIN TIGER J300 METALOGENIA
T23B TOOTH SHORT TIGER H&L BLACKCAT BLADES MH23W TOOTH TWIN TIGER H&L METALOGENIA
230B TOOTH STANDARD (HL230) H&L BLACKCAT BLADES TMC35W TOOTH TWIN TIGER J350 METALOGENIA
252B TOOTH STD 25 SERIES H&L BLACKCAT BLADES TMC45W TOOTH TWIN TIGER J450/460 METALOGENIA
T1U3202B TOOTH TIGER J200 BLACKCAT BLADES MG8W TOOTH TWIN TIGER MG8 SERIES METALOGENIA
T1U3252B TOOTH TIGER J250 BLACKCAT BLADES TMC35U TOOTH UNIVERSAL J350 METALOGENIA
T1U3302B TOOTH TIGER J300 BLACKCAT BLADES TMC45U TOOTH UNIVERSAL J450 METALOGENIA
T1U3352B TOOTH TIGER J350 BLACKCAT BLADES WO5 POCKET PENGO
T1U3452B TOOTH TIGER J450 BLACKCAT BLADES 299 TOOTH CARBIDE AUGER PENGO
1U3202WTB TOOTH TWIN TIGER J200 BLACKCAT BLADES 35 TOOTH DIRT AUGER PENGO
1U3252WTB TOOTH TWIN TIGER J250 BLACKCAT BLADES 211 TOOTH DIRT 170034 TAPER FIT AUGER PENGO
1U3302WTB TOOTH TWIN TIGER J300 BLACKCAT BLADES
1U3352WTB TOOTH TWIN TIGER J350 BLACKCAT BLADES WING & PLOW BLADES (pg. 111-116)
1U3452WTB TOOTH TWIN TIGER J450 BLACKCAT BLADES ITEM DESCRIPTION VENDOR
23WTB TOOTH TWIN TIGER H&L BLACKCAT BLADES
7T3402WTB TOOTH TWIN TIGER J400 BLACKCAT BLADES 134 TOOTH DIRT GAGE 134411 TAPER AUGER PENGO
230TTDB TOOTH TWIN TIGER (HL230TTD) H&L BLACKCAT BLADES JOMA6000X4 JOMA 4’ RUBBER BLADE SEFCI 58P BLACKCAT BLADES
J350TTD TOOTH TWIN TIGER (NARROW) J350 BLACKCAT BLADES CIAB664848C PLOW BLADE 34X6X48 SEFCI 58P BLACKCAT BLADES
J450TTD TOOTH TWIN TIGER (NARROW) J450 BLACKCAT BLADES CRA762-TD PLOW BLADE 34X8X144 SEFC 58TP BLACKCAT BLADES
1324720B TOOTH UNI BQ35 SKIDSTEER BLACKCAT BLADES PBA6814444 PLOW BLADE 34X8X144 SEFC 58TP BLACKCAT BLADES
922X156 SHANK TOOL BOX RIPPER CREIGHTON PBA6807274 PLOW BLADE 34X8X72 SEFC 34TP BLACKCAT BLADES
5500W23F ADAPTER FLUSH MOUNT 23 SERIES FABCO PBA6807244 PLOW BLADE 34X8X72 SEFC 58TP BLACKCAT BLADES
23F TOOTH FABRICATED 23 SERIES H&L FABCO PBA6807244-A PLOW BLADE 34X8X72 SEFC 58TP BLACKCAT BLADES
2AF TOOTH FABRICATED CRIMP ON H&L FABCO PBA5812045 PLOW BLADE 58X8X120 SEFC 58TP BLACKCAT BLADES
35SI TOOTH SHARP - 35 SERIES ESCO ITR AMERICA CIAT763648 PLOW BLADE 78X6X36 SEFCI 58P BLACKCAT BLADES
TMC35A TOOTH ABRASION PENETRATOR J350 METALOGENIA CIAT764848 PLOW BLADE 78X6X48 SEFCI 58P BLACKCAT BLADES
TMC40A TOOTH ABRASION PENETRATOR J400 METALOGENIA CIAV764848 PLOW BLADE 78X6X48 SEFCI 58P BLACKCAT BLADES
TMC45A TOOTH ABRASION PENETRATOR J450/460 METALOGENIA
TMC45AX TOOTH ABRASION PENETRATOR H.D. J450/460 METALOGENIA
TMC55AX TOOTH ABRASION PENETRATOR H.D. J550 METALOGENIA
MC30F TOOTH FLARE J300 METALOGENIA
TMC35F TOOTH FLARED J350 METALOGENIA
TMC45F TOOTH FLARED J450/460 METALOGENIA

172 TITAN 2014 / 2015 CATALOGUE

[Link]
CARGO CONTROL
TIE DOWN

Cargo Securement
L-140 Standard Ratchet Type Load Binders
- Upgraded for use with Grades 70, 80 - One piece assembly, no bolts or nuts
and 100 Chain. to loosen.
- Utilizes standard Crosby A-323 Alloy Eye - Ratchet spring is rust proofed.
Grab Hooks. - All load bearing or holding parts forged.
- New design “one piece” forged handle. - Easy operating positive ratchet.
- Continuous take-up feature provides
finite adjustment to tie down load.

Min-Max Working Proof Handle Barrel

SKU Model Chain Size Load Limit Load Weight Length Length Take Up
(in.) (lbs.) (lbs.)* (lbs.) (in.) (in.) (in.)

1048404 R-7** 5/16-3/8 8800 17600 12.11 14 10 8.0

1048422 R-A** 3/8-1/2 15000 30000 14.70 14 10 8.0
1048440 R-C” 1/2-5/8 16000 32000 14.55 14 10 8.0
* Ultimate Load is 3 times the Working Load Limit. ** Matches the Working Load Limit of Grade 100 chain for both sizes.
*** Matches the Working Load Limit of Grade 100 chain for 1/2” size.

L-150 Standard Lever Type Load Binders

- Extra heavy construction at leverage - Ball and socket swivel joints at hook
point to prevent spreading. assemblies permit a straight line pull.
- Heel of binder toggles away from load, - Meets or exceeds DOT and CVSA Cargo
permitting easy release. Securement Tie-Down Guidelines

Std. Min-Max Working Proof Handle Handle

SKU Model Pkg. Chain Size Load Limit Load Weight Length Length Take Up
(in.) (lbs.) (lbs.)* (lbs.) (in.) (in.) (in.)

1048128 7-1 4 5/16-3/8 5400 10800 19000 7.02 16 4.5

1048146 A-l 4 3/8-1/2 9200 18400 33000 12.47 18.69 4.5
1048164 C-l 4 1/2-5/8 13000 26000 46000 19.68 21 4.75
* Binders shown with Proof Loads have been individually proof tested to these values shown, prior to shipment.

Sure-Load Standard Ratchet & Lever Type Load Binder

Heavy duty imported Load Binders offering
excellent quality and affordability
Min-Max Working
Item Number Description Chain Size Load Limit
(in.) (lbs.)

10481281 Lever Load Binder 5/16-3/8 5400 lbs

10481371 Lever Load Binder 3/8 - 1/2 9200 lbs
10484041 Ratchet Load Binder 5/16-3/8 6600 lbs
10484221 Ratchet Load Binder 3/8 - 1/2 9200 lbs
10484401 Ratchet Load Binder 1/2 - 5/8 13000 lbs

TITAN 2014 / 2015 CATALOGUE 173

CARGO CONTROL
TIE DOWN

Cargo Securement
SCC QuickBinder Plus
SCC QuikBinder Plus binder available on the market today!
A ratchet binder like no other this premium The folding handle is safer and more
patented ratchet binder is unlike any other convenient than traditional ratchet binders.
Stock #H5125-0658 7,100 Lb. Working Load Limit
- Use on all 5/16” or 3/8” size G-70 Transport
Stock #H5125-0858 12,000 Lb. Working Load Limit
- Use on all 3/8” or 1/2” size G-70 Transport
Stock* H5125-0958 18,100 Lb. Working Load Limit
- Use on all 1/2” or 5/8” size G-70 Transport.

The SCC Quikbinder PLUS can be locked to chain with

a long shank padlock making it tough to tamper with the
binder, assembly or the load.
Every SCC load binder is factory proof tested to 75%
of the minimum break strength (MBS).

Faster to Install & Safer to use sticking out and more convenient to use
The 3-position pawl offers the user a choice than traditional ratchet binders. Simply fold
of ratchet extension, ratchet take-up or a the handle down after the load is secure
“free-spin” setting for fast adjustment in or when storing the see QuikBinder PLUS
either direction. Secure your load in half on your cab rack. More functional than
the time! The folding handle makes the see standard ratchet handles.
QuikBinder PLUS safer with no handle Not For Overhead Lifting

G70 Bulk Chain & Assembly with Clevis Grab Hooks

G70 chain was specifically designed for and for protection of the chain. Meets
cargo securement. G70 assemblies have NACM specifications.
a yellow zinc finish for easier identification

Grade 70 Transportation Chain Bulk

Aprox. Weight Per Feet Per Working
Item Number Description 100 Feet Drum Load Limit

9701330G 5/16” G70 Bulk Transport Chain 93 lbs 550’ 4,700 lbs
9701335G 3/8” G70 Bulk Transport Chain 131 lbs 400’ 6,600 lbs
9701350G 1/2” G70 Bulk Transport Chain 240 lbs 200’ 11,300 lbs

Grade 70 Transportation Chain Assemblies

Working
Item Number Description Load Limit

9701330G16 5/16” X 16’ Chain Assembly c/w Clevis Grab Hooks 4,700 lbs
9701330G20 5/16” X 20’ Chain Assembly c/w Clevis Grab Hooks 4,700 lbs
9701335G16 3/8” X 16’ Chain Assembly c/wClevis Grab Hooks 6,600 lbs
9701335G20 3/8” X 20’ Chain Assembly c/w Clevis Grab Hooks 6,600 lbs
9701350G16 1/2” X 16’ Chain Assembly c/w Clevis Grab Hooks 11,300 lbs
- Assemblies with hooks equipped with work load tags

174 TITAN 2014 / 2015 CATALOGUE

CARGO CONTROL
TIE DOWN

Sure-Load Cargo Securement

Ratchet and winch straps have been designed for a variety of Ratchet Assemblies
cargo securement applications. All assemblies come with working
Working
load limited clearly identified on strapping. Item Number Description Load Limit

110WDBL Ratchet Assy. 1” X 10’ Mini Black 1100 lbs

116WDBL Ratchet Assy. 1” X 16’ Mini Black 1100 lbs
120WDBL 120WDBL Ratchet Assy. 1” X 20’ Mini Black 1100 lbs
220RF Ratchet Assy. 2” X 20’ Flat Hook 3335 lbs
220RW Ratchet Assy. 2” X 20’ Wire Hook 3335 lbs
230RDCH Ratchet Assy. 2” X 30’ Chain & Hook 3335 lbs
230RF Ratchet Assy. 2” X 30’ Flat Hook 3335 lbs
230RW Ratchet Assy. 2” X 30’ Wire Hook 3335 lbs
220CDCH 330RCDCH Ratchet Assy. 3” X 30’ Chain & Hook 4000 lbs
330RF Ratchet Assy. 3” X 30’ Flat Hook 4000 lbs
330RW Ratchet Assy. 3” X 30’ Wire Hook 4000 lbs
430RCDCH Ratchet Assy. 4” X 30’ Chain & Hook 5000 lbs
430RF Ratchet Assy. 4” X 30’ Flat Hook 5000 lbs
430RW Ratchet Assy. 4” X 30’ Wire Hook 5000 lbs

230RW
Winch Strap Assemblies
Working
Item Number Description Load Limit

220CDCH Cargo Strap 2” X 20’ Chain & Hook 3335 lbs

220CF Cargo Strap 2” X 20’ Flat Hook 3335 lbs
330RF
220CW Cargo Strap 2” X 20’ Wire Hook 3335 lbs
230CDCH Cargo Strap 2” X 30’ Chain & Hook 3335 lbs
230CF Cargo Strap 2” X 30’ Flat Hook 3335 lbs
230CW Cargo Strap 2” X 30’ Wire Hook 3335lbs
330CDCH Cargo Strap 3” X 30’ Chain & Hook 4000 lbs
330CF Cargo Strap 3” X30’ Flat Hook 4000 lbs

330CF 330CW Cargo Strap 3” x 30’ Wire Hook 4000 lbs

330CD Cargo Strap 3” x 30’ D Ring 4000 lbs
430CF Cargo Strap 4” X 30’ Flat Hook 5000 lbs
430CW Cargo Strap 4” X 30’ Wire Hook 5000 lbs
430CDCH Cargo Strap 4” X 30’ Chain & Hook 5000 lbs
430CF Cargo Strap 4” X 30’ Flat Hook 5000 lbs
430CW Cargo Strap 4” X 30’ Wire Hook 5000 lbs

330CD

430CDCH

TITAN 2014 / 2015 CATALOGUE 175

CARGO CONTROL
TIE DOWN

Woven Polyester Strapping

GatorSTRAP®
- is more cost effective than steel strapping.
- has no sharp edges to cause injuries or tire damage.
- is as strong as steel but weighs 75% less.
- is easily applied and can be retensioned when necessary.
- can be customized with your company name, logo or message.

Heavy Duty Woven Polyester Strapping

Coil Coils/ Coils/ Break System
Item Id Width Length Box Pallet Strength* Strength*

2015 (#) 5/8” 2,000 ft 2 54 1,500 lbs. 2,100 lbs.

Once it Grabs, it Never Lets Go! 2010 5/8” 2,000 ft 2 54 1,800 lbs. 2,520 lbs.
2070 3/4” 1,650 ft 2 54 2,400 lbs. 3,360 lbs.
2025 3/4” 1,650 ft 2 54 2,700 lbs. 3,780 lbs.
2030 1” 2,500 ft 1 27 3,100 lbs. 4,340 lbs.
2035 1/4” 600 ft 4 48 3,285 lbs. 4,590 lbs.
2035-2250 1/4” 2,250 ft 1 27 3,285 lbs. 4,590 lbs.
2040-AAR 1/4” 600 ft 4 48 3,800 lbs. 5,320 lbs.
2060 1/2” 600 ft 4 48 4,700 lbs. 6,580 lbs.
2055-AAR 1/2” 600 ft 4 48 5,400 lbs. 7,560 lbs.
2055-1500-AAR 1/2” 1,500 ft 1 27 5,400 lbs. 7,560 lbs.
(#) AAR available upon request.
* All breaks are nominal +/- 5%,

Extra Grip Phosphate Coated Wire Buckles

Item Id Width Use On Strap Gauge Qty/B0x

3005 16mm 5/8” 0.138 1000

3020 19mm 3/4” 0.157 1000
3025 19mm 3/4” 0.177 500
3030 25mm 1.0” 0.197 500
3033 25mm 1.0” 0.238 400
3035 32mm 1 1/4” & 1 1/2” 0.275 250

176 TITAN 2014 / 2015 CATALOGUE

CARGO CONTROL
TIE DOWN

Tensioning Tools
Item Id Description Width

4010 Manual All

4025 Small Economy 5/8” to 3/4”
4040 4060
4040 Small Heavy Duty 5/8” to 3/4”
4050 Large Economy 5/8” to 1 1/2”
4051 Large Economy w/Pusher Nose 5/8” to 1 1/2”
4055 Large Heavy Duty 5/8” to 1 1/2”
4060 Super Heavy Duty 5/8” to 1 1/2”
4080 32mm Pneumatic up to 1 1/4”
4085 50mm Pneumatic up to 2”
4090 Heavy Duty Battery 5/8” to 2”
4095 Medium Duty Battery 5/8” to 2”
4090 4080

Accessories
Item Id Description

6040 Safety Strap Cutter

6055 Pallet Strap Threading Tool
6071 Rolling Strap Dispenser
6075 Forklift Mounted Strap Dispenser
6080 Driver Kit

6071 6075
Rolling Strap Dispenser Forklift Mounted Strap Dispenser

Driver and Starter Kits

6080
Available for all products

TITAN 2014 / 2015 CATALOGUE 177

CARGO CONTROL
TIE DOWN

C-186 Spectrum 4® High Test Boomer Chains

C-186 C-186 Working Standard Weight
Chain Size Stock No. Load Limit Length Each
(mm) (kg) (m) (kg)

6 278988 1180 6.10 7.3

8 278997 1770 6.10 11.3
10 279004 2450 6.10 15.4
11 279013 3270 6.10 20.4
13 279022 4170 6.10 27.2
16 279031 5900 6.10 40.8

C-187 Spectrum 7® Transport Boomer Chains

C-186 - Ends fitted with Crosby
Chain Size
C-187
Stock No.
Working
Load Limit
Standard
Length
Weight
Each
A-330 Quenched and
(mm) (kg) (m) (kg)
Tempered alloy clevis
grab hook. 6 279576 1430 6.10 7.3
8 279585 2130 6.10 11.3
- Finish – Self Colored.
10 279594 3000 6.10 15.4
- Meets or exceeds
11 279601 3970 6.10 20.4
requirements of
13 279610 5130 6.10 27.2
US DOT FMCSA Part 393
Subpart I.

C-188 Spectrum 8® Alloy Boomer Chains

C-186 - Heat treated alloy steel.
Chain Size
C-188
Stock No.
Working
Load Limit
Standard
Length
Weight
Each
- Ends fitted with Crosby (mm) (kg) (m) (kg)
A-330 Quenched and
10 279889 3200 6.10 13.7
Tempered alloy clevis
grab hook. 13 279898 5400 6.10 24.5

- Finish – Self Colored.

- Meets or exceeds
requirements of
US DOT FMCSA Part 393
Subpart I.

L-180 Winchline Tail Chain

L-180 - Hooks are Forged – Wire Rope
Diameter
L-180
Stock No.
Working
Load Limit Length
No. of
Links
Weight
Each
Quenched and Tempered.
(mm)* (kg)† (m) (kg)
- Individually Proof Tested.
8 - 10 1091473 2450 457 11 1.36
- Spectrum 4® High Test
13 - 16 1091482 5900 457 7 2.81
Carbon Steel from 5/16”
19 - 22 1091511 15510 610 8 8.25
through 5/8” (8 - 16mm).
25 - 29 1091516 21640 457 5 9.60
- Spectrum 8® Alloy Steel
25 - 29 1091525 21640 610 7 10.6
from 3/4” through 1-1/4”
32 1091532 32795 610 5 18.1
(20 - 32mm).
* Recommended for IPS or XIP (EIP), RRL, FC or IWRC wire rope.
- Meets or exceeds † Ultimate Load is 3.5 times the Working Load Limit.
requirements of US DOT
FMCSA Part 393 Subpart I.

178 TITAN 2014 / 2015 CATALOGUE

CARGO CONTROL
TOW STRAPS & ROPES

Pull Away Tow Straps

- Stronger Than Chain
- Will not mar, scratch, or dent vehicle
- Will not decay, extreme long life
- Added protection around eyes for extra life

SizingChart & Measurements

Approx. Weight
t6.2Model Number Width Ply Eye Size per foot

1ply Min. Break Strength (lbs.)

PAL180 2” 1 12” 16000 0.11
PAL270 3” 1 14” 24000 0.17
PAL360 4” 1 14” 32000 0.23
PAL540 6” 1 18” 48000 0.35
PAL720 8” 1 20” 64000 0.46
PAL900 10” 1 22” 80000 0.57
PAL1080 12” 1 24” 96000 0.71
2 ply Min. Break Strength (lbs.)
PAL2180 2” 2 12” 32000 0.21
PAL2270 3” 2 14” 44400 0.33
PAL2360 4” 2 14” 57600 0.46
PAL2450 5” 2 16” 70000 0.53
PAL2540 6” 2 18” 81600 0.69
PAL2720 8” 2 20” 102400 0.92
PAL2900 10” 2 22” 120000 1.13
PAL21080 12” 2 24” 134400 1.42
3 ply Min. Break Strength (lbs.)
PAL3180 2” 3 12” 48000 0.32
PAL3270 3” 3 16” 66600 0.50
PAL3360 4” 3 16” 86400 0.69
PAL3540 6” 3 20” 122400 1.04
PAL3720 8” 3 22” 153600 1.38
PAL3900 10” 3 24” 180000 1.70
PAL31080 12” 3 26” 201600 2.13
4 ply Min. Break Strength (lbs.)
PAL4180 2” 4 12” 64000 0.42
PAL4270 3” 4 16” 88800 0.66
PAL4360 4” 4 16” 115200 0.92
PAL4540 6” 4 20” 163200 1.38
PAL4720 8” 4 22” 204800 1.84
PAL4900 10” 4 24” 240000 2.26
PAL41080 12” 4 26” 268800 2.84

TITAN 2014 / 2015 CATALOGUE 179

CARGO CONTROL
WINCH LINES & ACCESSORIES

Hammer Type Wire Rope Cutter

Invented in 1928 by Morse-Starrett to cut without affecting the roundness of the
wire rope. Actuated by striking a hammer, wire rope. Blades & dies are made of the
they are easy to operate and give superior finest tool steels available, heat treated
performance without jamming. They are and ground to close tolerances.
precision-engineered to deliver a clean cut

Part#101M #1 Weight - 8 lbs Capacity - %”

Part#121M #1A Weight - 17 lbs Capacity-1 1/16”
Part#131M #2 Weight - 28 lbs Capacity - 1 1/2”

Lewis Wire Rope Snake Grip LSG 1” - 1 1/2”

The Lewis Snake Grip expands or contracts go smoothly through blocks and prevent
to grip different or identical cable and/or line twisting. Install new cable by using old
rope sizes as per the customer’s needs. existing cable as pulling line. Always seize
Save time stringing up and changing and the ends of the grips by banding or taping. -
unstringing because the snake requires Lewis Manufacturing.
no special tools. The swivel and swing link

A full range of sizes available, including:

Regular Size LSG Snakes
Approx. Brk. Work
Part No. / Size Range Strength Load

LSG121 / 1/2” -1” 7,500 lbs. 2,500 lbs.

LSG1 / 1”-1 1/2” 10,000 lbs. 3,500 lbs.
LSG112 / 1 1/2”-2” 12,000 lbs. 4,000 lbs.

Wedge-Type Ferrules
Machined wedge-type ferrules permit the more gripping surface on the wire rope
make up or repair of chokers and winch strands and greater holding power.
lines in minutes – no molten socket metal
or swaging equipment is required. Ferrules WARNING: Wedge-type ferrules are
are comprised of high strength alloy steel. intended only for use with new 6x19 class or
The two-piece wedges are rifled to provide 6 x 37 class, right regular lay, EIP, IWRC rope.
Rope Size Ferrule No. Colour Diameter Length
(in.) (in.) (in.)

7/16 1/2 9/16 L797 Silver 1 1/8 1 1/4

9/16 5/8 L799 Pink 1 1/2 1 3/4
5/8 L801 Maroon 1 5/8 2
3/4 L802 Gray 1 5/8 2
3/4 L803 White
7/8 L804 Black 2 1/8 2 9/16
1 L805 Green 2 1/8 2 9/16
1 L807 Blue
1-1/8 L808 Yellow 2 3/8 2 9/16
1-1/4 L809 Orange 2 3/8 2 9/16
1-1/4 L810 Black & White

180 TITAN 2014 / 2015 CATALOGUE

CARGO CONTROL
WINCH LINES & ACCESSORIES

Sure-Load® Winches
Winches provide for a safe method for securing cargo on truck or trailer flat beds. Available in a wide variety of styles for use with our
Sure-Load® winch strap assemblies.

Weld On Portable Sliding Low Profile

Weld On winches are 2 Locking screws allow Sliding winches can be Low profile winches are
designed to be permanently the portable winches to located anywhere along the built to the same specifications
mounted to the bottom side be placed and secured length of the slide track and as the weld on winches and
of the truck or trailer frame. anywhere along the will lock into position when are for side mount
Holds up to 30 feet of webbing side-rail of the trailer. tension is applied to the strap. applications only.

Part # winch6 Part # winch3 Part # winch2 Part # winch1 - Weld On Low Profile
Part # winch5 - 3 Bar Low Profile
For safe operation, all winches should be installed with the ratchet pawl on the top of the ratchet wheel so that the pawl drops Part # winch10 - Bolt On Low Profile
into the ratchet wheel by gravity. Use a winch bar when tightening or loosening winches and never let go of a winch bar without Part # winch8 - Sliding Low Profile
checking that the pawl has fully engaged a ratchet wheel tooth.

Strap Winder
Steel Strap Winder is used on the outer rail or rub rail of
flatbed trailers.
The strap winder provides a fast and trouble-free method of
winding 2”, 3”, 4” webbing straps, and can easily be stored.
The strap winder can be used either right or left handed and
has tapered forks for easy webbing insertion and removal.

Winch Bars

Part # WB3 Combination Part # WB2 Combination Part # WB1

With Snipe And Pipe End With Box End Standard Chrome Bar

Sure-Load Winch Bars are tapered and angled at the end for easy operation. Our winch bars have knurled handles.
All Winch Bars Are To Be Used To Release Chain Load Binders, As Well As, Tension Winches. Not To Be Used As A Cheater Bar To Tension Load Binders.

TITAN 2014 / 2015 CATALOGUE 181

CARGO CONTROL
LOADING SLINGS

Loading Slings
- Custom manufactured assemblies for all your haulage needs - Available in a number of configurations to meet your specific
- Hand spliced eyes do not catch under loads or on the truck beds requirements.
- IWRC crush resistant core

Domestic Loading Sling- Fabricated in ourfacilities using 6X36 IWRC standards. Import Loading Sling - Fabricated in China using
Wire Rope manufactured in the U.S. to ISO-9001-.2000 standrads. 6X36 IWRC Wire Rope manufactured in China to ISO 9001:2000
Import Wire Loading Sling - Fabricated in ourfacilities using standards and available in limited sizes.
6X36 IWRC Wire Rope manufactured overseas to ISO-9001:2000

Ordering Information: Specifications:

Domestic Wire Rope Loading Sling
7/8” Loading Sling 22’ 24’ 26’ 28’ Working Minimum
Domestic Wire Rope 01422LSD 01424LSD 01426LSD 01428LSD Diameter Weight Load Limit* Breaking Force
Import Wire Rope 01422LS 01424LS 01426LS 01428LS (lb/ft)
Import Manufactured N/A N/A N/A N/A 7/8” 1.42 22,819 68,457
1” 1.85 29,641 88,923
1” Loading Sling 22’ 24’ 26’ 28’ 1 1/16” 2 32,623 97,869
Domestic Wire Rope 10022LSD 10024LSD 10026LSD 10028LSD 1 1/8” 2.34 37,267 111,801
Import Wire Rope 10022LS 10024LS 10026LS 10028LS 1 1/4” 2.89 45,809 137,427
Import Manufactured N/A N/A 10026LSI 10028LSI

Import Wire Rope Loading Sling

1 1/16” Loading Sling 22’ 24’ 26’ 28’ Working Minimum
Domestic Wire Rope 10122LSD 10124LSD 10126LSD 10128LSD Diameter Weight Load Limit* Breaking Force

Import Wire Rope 10122LS 10124LS 10126LS 10128LS (lb/ft)

Import Manufactured N/A N/A N/A N/A 7/8” 1.42 22,819 68,457
1” 1.85 29,641 88,923
1 1/8” Loading Sling 22’ 24’ 26’ 28’ 1 1/16” 2 32,623 97,869
Domestic Wire Rope 10222LSD 10224LSD 10226LSD 10228LSD 1 1/8” 2.23 37,267 111,801
Import Wire Rope 10222LS 10224LS 10226LS 10228LS 1 1/4” 2.89 45,809 137,427
Import Manufactured N/A N/A 10226LSI 10228LSI

Import Manufactured Loading Sling

1 1/4” Loading Sling 22’ 24’ 26’ 28’ Working Minimum
Domestic Wire Rope 10422LSD 10424LSD 10426LSD 10428LSD Diameter Weight Load Limit* Breaking Force

Import Wire Rope 10422LS 10424LS 10426LS 10428LS (lb/ft)

Import Manufactured N/A N/A N/A N/A 7/8” N/A N/A N/A
Other Sizes Available On Request 1” 1.85 29,641 88,923
Flex-X 6 Loading Slings Available On Request
1 1/16” N/A N/A N/A
1 1/8” 2.23 37,267 111,801
1 1/4” N/A N/A N/A
* 3:1 Design Factor

182 TITAN 2014 / 2015 CATALOGUE

TIRE CHAINS
STUDDED TRUCK CHAINS

Super 2000 - 7mm

LIGHT & STRONG !
Save 35 % on weight and keep the strength of a standard truck chain.
Steel made with chrome, nickel and
manganese alloyed steel reinforced with
The Super 2000
has 8 mm (5/16”)
boron give us the possibility to offer a
studs to increase super tough light weight chain. This chain
grip and strength. hardened in our sophisticated furnaces is
good news to people weary of struggling
with heavy chains.
Please check our test results: Super 2000 chain vs. competing 8mm chain
Super 2000 Super 2000 Super 2000 Super 2000
Super 2000

has the strongest has the strongest has the strongest has stronger
side chain cross chain hooks locks

Bigger Bigger Bigger Bigger

8mm chain
Competing

side chain cross chain hooks tighteners

breaks breaks open break
before before before before
S-2000 S-2000 S-2000 S-2000

Super 2000 - With Nickel & Higher, Oversized Studs

Single Dual Triple
w/cams w/cams
t6.2 Super 2000 - 7mm / 9/32” Weight Stock No. Stock No. Weight Stock No. Stock No.
(kg) (kg)

8.25-15_235/75-17.5_235/85-16 15 490063 491063

245-16_245/60-19.5_31 x1 1 .50-15 10-16.5_245/85-16_265/70-15 15 490082 491082
265/70-22.5_1 0-19.5_255/70-22.5 8.25-20_9-22.5 19 490165 491165
9.00-20_1 0-22.5 21 490364 491364
10.00-20 _11-22.5 _275/80-22.5 285/75-22.5_285/80-22.5 22 490374 491374 41 494374 495374
10.00-22_295/75-24.5 23 490375 491375 43 494375** 495375**
11.00-20_12-22.5_295/80-22.5_305/75-24.5_315/75-22.5 23 490384 491384 43 494384 495384
12.00-20_13-22.5 25 490385 491385 46 494385 495385
12.00-24 27 490386 491386 50 494386 495386
14.00-24_385/95-25 32 490408 491408 59 494408 495408
14.00-20_13.50-20 30 490416 491416 56 494416 495416
435/65-22.5 445/65-22.5 30 490446 491446 56 494446 495446
** Best Sellers

* * Pre-Fit Tire Chain before use **

TITAN 2014 / 2015 CATALOGUE 183

TIRE CHAINS
STUDDED TRUCK CHAINS

Super Duty 9.5mm

SUPER DUTY. The ultimate in traction and and side chains are made of hardened Grade 80
durability. SUPER DUTY is made to replace the material and the cross chain itself is 50% tougher
9 and 10 mm chain with an improved common size and stronger than before. The hardened boomers
- 9.5 mm. The SUPER DUTY cross chain hooks vouch for a chain quality not previously available.

The Super Duty has 7/16” (11mm)

studs to increase grip and strength.

Regular Dual Triple

w/cams w/cams
t6.2 Super Duty - 9.5mm / 3/8” Weight Stock No. Stock No. Weight Stock No. Stock No.
(kg) (kg)

10.00-22_11-24.5_295/75-24.5 50 460620 460621 94 464620 646621

7.50R16 235/85R16 7.00R17/18

7026 7026 7/0 7007- 6/0
7.50R17 8R19.5 225/70R19.5 78 .312 44 84.4 V5315 115 40 9 14.4 271
72002 72042 209-25 .281
7.00R20 7R22.5
10R17.5 245/70R19.5 7.50R20 7006 7006 7/0 7007- 6/0
85 47 90.2 V5315 115 44 9 14.4 271
72202 72242 .312 209-25 .281
8.25R20 9R22.5 235/80R22.5 7026 7026 7/0 7007- 6/0
97 47 90.2 V5330 132 44 11 16.9 290
245/75R22.5 255/70R22.5 73202 73242 .312 211-25 .281
9.00R20 10R22.5 7006 7006 7/0 7007- 6/0
105 50 96 V5340 141 44 12 18.5 290
74202 74242 .312 212-25 .281
10.00R20 11R22.5 275/80R22.5 7026 7026 7/0 7007- 6/0
112 55 105.6 V5340 141 48 12 18.5 290
285/75R22.5 295/75R22.5 285/75R24.5 74302 74342 .312 212-25 .281
7006 7006 7/0 V5340 7136- 7/0
118 55 105.6 173 48 11 18.8 290
74322 74344 .312 HD-11 866-25 .312
7006 7006 7/0 V5340 7136- 7/0
122 58 111.4 162 52 10 17.4 290
74366 74346 .312 HD-10 863-25 .312
10.00R22 11R24.5 295/75R24.5 7006 7006 7/0 7007- 6/0
120 59 113.3 141 52 12 18.5 290
74402 74442 .312 V5340 212-25 .281
7006 7006 7/0 V5340 7136- 7/0
128 59 113.3 173 52 11 18.8 290
74422 74444 .312 HD-11 866-25 .312
7004 7024 7/0 V5340 7136- 7/0
132 61 117.1 162 56 10 17.4 290
84966 84964 .312 HD-10 863-25 .312
11.00R20 12R22.5 7006 7006 7/0 7007- 7/0
127 55 105.6 V5355 185 48 12 20.2 290
75502 75542 .312 312-25 .312
12.00R20 11.00R22 12R24.5 7006 7006 7/0 7007- 7/0
133 58 111.4 V5355 185 52 12 20.2 290
75602 75642 .312 312-25 .312

* * Pre-Fit Tire Chain before use **

TITAN 2014 / 2015 CATALOGUE 187

TIRE CHAINS
TRUCK CHAINS

TRYGG Grouser Chain

- Drop forged grousers. Grouser Chain
- Smoother ride and easy on the asphalt. Stock
Weight No.
- The grousers are shaped to the rings and
can not lay down. 14.00-24 89 503040
- The wide rounded base of the grousers 16.00-24 104 503041
reduce tire wear. 18.00-24 129 503042
TRYGG 15.5-25 86 503048
Grouser chain. 17.5-25 94 503050

For construction 20.5-25 118 503051

and snow clearing. 23.5-25 136 503052

TRYGG Heavy Duty

Superb grip for all conditions. TRYGG Heavy tires. Quick changing of sections ensure
Duty may easily be altered to fit alternative adequate repair in “no time”.

Heavy Duty
3/8” 7/16” 1/2”
Weight Stock No. Weight Stock No. Weight Stock No.

14.00-24 116 530680 154 530780

16.00-24 1 40 530681 175 530781 211 530880
18.00-24 194 530782 237 530882
17.5-25 133 530661 ** 150 530761 ** 198 530861 **
20.5-25 180 530763 ** 228 530863 **
20.5-25 L5 230 530864
23.5-25 262 530865
23.5-25 L5 262 530866
** This item is great for Graders & Loaders

Square Ice
Single 1/4” Single 5/16” Dual Triple 1/4” Dual Triple 5/16”
w / cams w / cams w / cams
Stock No. Stock No. Stock No. Stock No. Stock No. Stock No. Stock No.

235/85-16_255/85-16_8.25-15
235-16_7.50-16 475080
255/75-22.5_10R-19.5 475085
8.25-20_9-22.5_255/70-22.5 475089
9.00-20_1 OR-22.5_275/80-22.5 475090
10.00-20_11 R-22.5_285/75-22.5 475100 475200 475201 469100 469101 469200 469201
10.00-22_11 R-24.5_295/75-24.5 475110 475220 475221 469110 469111 469220 469221
10.00-22_11.00-20 475111 469110 469111 469220 469221
12.00-20_13R-22.5 475120 475170 469120 469121
12.00-24_12.00-25
435/65-22.5_445/65-22.5
* Available also m 3/8” and 7/16”

* * Pre-Fit Tire Chain before use **

188 TITAN 2014 / 2015 CATALOGUE

TIRE CHAINS
TRUCK CHAINS

TRYGG Safety Grip 6x7 mm

A strong product made of light chain. The ultimate Plug in tightening rail available on request.
choice for temporary chain usage. The chain will For continuous work with snow removal we
perform well under all working conditions. Tailor recommend using the TRYGG SMT.
your chain to a snug fit on all tires.

Safety Grip 6x7

Stock No. Stock No. Stock No. Stock No. Stock No.
& Weight Size & Weight Size & Weight Size & Weight Size & Weight Size

513179 8.00-18 513388 14.5/80-18 513399 14.00-24/25 513419 18.4-38 513551 16.00-24/25
25 kg 8.3-22 33 kg 14.5-20 47 kg 14.9-28 62 kg 460/85-34 53 kg 16.5/85-28
8.3-24 15-19.5 14.9-30 480/70-38 16.9-28
250/80-16 41x14.00-20 16.9-24 520/70-38 16.9-30
260/80-20 380/70-20 16.9-26 540/65-38 18.4-26
400/55-22.5 17.5-25 540/70-34 420/85-28
513302 8.25-15 400/60-22.5 380/85-24 445/95-25
24.5 kg 10.0/75-15.3 425/55-17 385/95-25 513504 9.5-20 440/80-30
10.5/80-18 420/70-28 29 kg 9.5-24 480/70-28
11.5/80-15.3 513396 12.00-20 420/70-30 10.5-20 480/70-30
31x11.50-15 39 kg 14.5-20 440/65-28 11.2-20 520/65-30
33x10.50-16 14.9/80-20 450/65-28 12.5-18 540/65-28
33x12.50-15 14.9-20 480/65-28 12.5/80-18 540/65-30
300-15 16/70-20 480/70-24 31x10.50-15
355/80-20 480/70-26 320/70-20 513552 14.9-38
513305 12-16.5 385/65-22.5 365/70-18 53 kg 15.5-38
26 kg 15.0/55-17 400/70-20 513414 23.5-25std 16.9-34
31x15.5-15 405/70-20 68 kg 600/65-34 513512 11.2-28 18.4-30
400/60-15.5 420/65-20 600/65-38 39 kg 12.4-24 420/70-34
425/55-17 620/75-30 12.4-28 420/85-34
513397 14.00-20 13.6-24
513313 19.5L-24 43 kg 15.5/70-25 513415 20.8-38 320/70-28 513602 20R-24
46 kg 440/80-24 15.5-25 68 kg 520/85-38 340/85-24 53 kg 20.5-25std
480/65-24 15.5/80-24 540/80-38 360/70-24 525/80-25
480/70-24 16.0/70-24 580/70-38 600/55-26.5
Squarelink with wear bars for longer life, 520/65-24 44x18.00-20 513514 12.4-32 650/50-22.5
length and better grip! 520/65-24 IND 380/65-24 513416 650/65-34 45 kg 12.4-36 605/65-26.5
540/65-24 380/70-24 75 kg 650/60-38
400/60-26.5 650/65-38 513522 13.00-24/25 513766 23.5-25std
513387 11.2-24 400/65-26.5 43 kg 13.6-28 60 kg 23.5-25L5
31 kg 12.4-20 405/70-24 513417 650/65-42 14.9-24
12.5-20 420/65-24 80 kg 710/70-38 15.5/70-25 513991 19.0/45-17
300/70-20 420/70-24 360/70-28 32 kg 505/50-17
300/70-24 425/75-20 513418 16.9-38 505/50-17.5
300/75-20 440/65-24 62 kg 18.4-34 513524 13.6-36
320/70-24 440/70-24 460/85-34 48 kg 13.6-38 513992 525/55-17
335/80-18 445/70-24 480/70-34 340/85-38 33 kg 500/60-15.5
335/80-20 455/70-24 520/70-30
360/70-20 460/65-24 520/70-34
540/70-30
540/65-34
600/65-30.5

* * Pre-Fit Tire Chain before use **

TITAN 2014 / 2015 CATALOGUE 189

TIRE CHAINS
TRUCK CHAINS

TRYGG SMT Flexi

Tailor the chain to a perfect fit without the use of The Flexi side chain link enables adjustment
any tools! - No matter what tire brand or condition. without tools.
Flexibility and strength of the regular SMT.

TRYGG SMT Flexi

Stock No. Stock No. Stock No. Stock No. Stock No.
& Weight Size & Weight Size & Weight Size & Weight Size & Weight Size

8 mm 602905 8.00-20 9 mm 603905 16.0/70-24 603908 20.5-25

58 kg 8.25-20 82 kg 400/80-24 101 kg 480/70-30
602901 12.4-28 8.3-24 603901 14.9-38 405/70-24 480/70-34
78 kg 12.4-32 9.5-20 103 kg 15.5-38 420/65-24 520/70-30
13.6-28 9.5-24 16.00-24/25 420/70-24 540/65-30
16.9-28 440/65-24 540/65-34
602902 11.2-24 602906 10.5-20 16.9/30 440/65-26.5
69 kg 11.2-28 58 kg 11.2-20 16.9-34 440/65-28 603909 18.4-38
12.4-24 12.5/80-18 18.4-30 440/70-24 110 kg 20.8-34
280/85-24 12.5/80-20 420/70-34 445/70-24 480/70-38
320/70-24 260/80-20 420/85-30 455/70-20 520/70-34
320/85-24 280/70-20 520/70-38
300/70-20 603902 16.9-38 603906 14.00-24/25 540/65-38
602903 13.6-24 320/70-20 113 kg 18.4-30 82 kg 14.9-28 600/65-34
79 kg 14.9-24 18.4-34 14.9-30
360/70-24 602907 16/70-20 460/85-34 16.9-24 603910 12.4-24
380/70-24 71 kg 360/70-20 480/70-34 16.9-26 73 kg 12.4-28
380/85-24 365/80-20 480/70-38 380/85-28 13.6-24
400/60-26.5 375/75-20 380/85-30 380/85-24
400/80-24 380/70-20 603903 13.00-24/25 420/70-28
425/45-20 405/70-18 85 kg 13.6-28 420/70-30 603911 17.5-25
405/70-20 14.00-20 420/85-24 87 kg 19.5L-24
602904 12.4-20 14.9-24 440/80-24
67 kg 12.5-20 602908 10.0/75-15.3 14.9-26 603907 13.6-24 480/65-24
13.6-16 47 kg 10.5/70-15.5 14.9-28 74 kg 14.5-20 480/65-28
14.5-20 10-16.5 15.5-25 14.9-20 480/70-24
Plug in tightening rail available
on request. 14/80-20 12-16.5 380/70-28 14/80-20 495/70-24
300/70-24 380/85-24 340/85-24 520/65-24
320/70-24 602909 12.5-18 380/85-28 360/70-24
340/75-20 43 kg 14.0/65-16 365/80-20
360/70-20 15.0/55-17 603904 12.4-36 375/75-20
365/80-20 15.5/55-18 97 kg 12.4-38 380/70-24
15.5/65-18 13.6-36 400/70-18
335/80-18 13.6-38 405/70-18
340/65-18
365/70-18
38x14.00-20

* * Pre-Fit Tire Chain before use **

190 TITAN 2014 / 2015 CATALOGUE

TIRE CHAINS
HEAVY EQUIPMENT CHAINS

TRYGG SM2D / SM3D TRYGG Netlink

A heavy duty traction chain Netlink
for forestry, construction Stock
and snow clearing. Ultimate Gauge No.
traction, smooth riding and
trouble-free operation. The 16.9-34 13 611252
chain with an unsurpassed 16.9-38 13 611253
number of studs for better 16.9-38 16 611353
grip and better wear. Double 18.4-30 13 611252
or triple pattern depending on 18.4-34 13 611253
18.4-34 16 611353
chain dimension and tire size.
18.00-24/25 STD 13 611257
Optional sidewall protection
18.00-24/25 STD 16 611357
as pictured. All SM2D/3D
18.00-24/25 L5 13 611258
versions have oversized studs 18.00-24/25 L5 16 611358
to increase grip and strength. 22/65-25 13 611276
The SM2D is made in 11, 13 16 22/65-25 16 611376
SM2D and 19 mm. Chain tightener is 23.1-26 13 611265
A chain designed strictly
recommended for heavy chains. 23.1-26 16 611365
for forestry use. This chain
23.1-34 16 611366
is suitable for skidders, 23.1-34 19 611466
forwarders, loaders, etc.
TRYGG SM2D 23.5-25 STD 13 611267
Casehardened net links with a 23.5-25 STD 16 611367
Stock
Gauge No. quality second to none. 23.5-25 L5 13 611268
23.5-25 L5 16 611368
18.4-30 13 613534 24.5-32 16 611366
18.4-34 16 618553 24.5-32 19 611466
24.5-32 16 618968 26.5-25 STD 16 611373
24.5-32 19 619968 30.5-32 16 611371
30.5-32 16 618969 Triple Diamond 16 611372
Double Diamond 19 611471
30.5-32 19 619969
Triple Diamond 19 611472
23.1 - 26 16 618965 Double studs on top of the
Double Diamond 22 611571
23.1 - 26 19 619965 vertical link provide extra
35.5-32 19 611482
600/50-22.5 11 615593 traction.
35.5-32 22 611851
600/55 - 26.5 13 616604 500/60-22.5 13 611228
600/60-30.5 11 615633 600/50-22.5 13 611275
Rockwell Hardness
SM3D w/optional side protection 600/65-38 11 615320 Hardness 600/55-22.5 13 611242
comparison
650/65-38 11 615321 HRc 600/55-26.5 13 611276
TRYGG 600/55-26.5 16 611376
700/50-26.5 13 616594
Thru hard 600/65 - 34 16 611378
700/50-26.5 16 618594
Standard 700/45-22.5 13 611204
700/55-34 13 616607
700/50 - 26.5 13 611261
710/45-26.5 13 616586
700/50 - 26.5 16 611361
750/55-26.5 13 616608
700/55-34 16 611364
750/55-26.5 16 618608 700/55-34 19 611465
Surface Center 73/44.00x32 16 611385
Triple Diamond 16 611389
Double Diamond 19 611445
Triple Diamond 19 611489
The unique inter locking between the
links will prevent the studs from lying Double Diamond 22 611585
down. The studs will stand upright at 67/34.00x26 16 611387
all times. 68/50.00x32 TD 19 611496
Double Diamond 22 611596
66/43.00x25/26 DD 16 611389
Triple Diamond 19 611451
* * Pre-Fit Tire Chain before use ** 43/25.00x35 TD 16 611395
Triple Diamond 19 611495

TITAN 2014 / 2015 CATALOGUE 191

TIRE CHAINS
HEAVY EQUIPMENT CHAINS

TRYGG U-Grip
Tall U-studs for longer U-Grip
lasting chains and better grip. Stock
These studs will never lie down. Gauge No.
The upright U-studs sit on the
horizontal links and create the 23.1 -26 16 621365

* * Pre-Fit Tire Chain before use **

192 TITAN 2014 / 2015 CATALOGUE

TIRE CHAINS
HEAVY EQUIPMENT CHAINS

TRYGG Ring Chain

The workhorse for any forestry operation.
Powerful lugs and oversized retainers etc. ensure long working life
and full value for the money. Floating rings and “Bear Paw” are now
heat treated in our new sophisticated hardening furnaces.
THROUGH HARD & CASE HARD! Chains don’t get tougher!

“RR” Regular Ring Close Floating

Double ring

NEW!
Cleats are added to the connection
BEAR PAW
rings for better traction!

“RC” Close Ring Regular Floating

Ring Chain
Fixed Floating Double BEAR
Regular Close Regular Close Ring PAW
Gauge Wt Stock# Wt Stock# Wt Stock# Wt StockNo. Stock No. Stock No.
(mm) (kg) (kg) (kg) (kg)

16.9-34_18.4-30 13mm 295 630150 284 631150

16mm 337 630250 631250 635650
16.9-38_18.4-34 13mm 300 630151 364 631151
16mm 345 630251 410 631251 340 635651 636651
23.1 -26 13mm 300 630165 375 631165
16mm 345 630265 448 631265 386 635665 432 636665
19mm 491 630365 602 631365 635765 500 635765
24.5-32 16mm(19)* 393 630270 545 631270 425 635670 498 636670
19mm(22)* 571 630370 623 631370 553 635770 633370
22mm(25)* 686 630470 841 631470 791 635870 633470
30.5-32 16mm(19)* 432 630280 585 631280 447 635680 532 636680
19mm(22)* 589 630380 764 631380 714 635780 632380 633380
22mm(25)* 705 630480 905 631480 635880 632480 633480
35.5-32 16mm(19)* 475 630285 631285 635685 636685
19mm(22)* 630385 873 631385 635785 632385 633385
22mm(25)* 630485 915 631485 635885 632485 633485
73/44.00x32 16mm(19)* 630290 631290 635690 636690
19mm(22)* 630390 791 631390 807 635790 632390 633390
22mm(25)* 630490 631490 635890 632490 633490

* Oversized chain links on main ring on all “floating” amd a;; “close fixed” (multiring) design.

* * Pre-Fit Tire Chain before use **

TITAN 2014 / 2015 CATALOGUE 193

TIRE CHAINS
HEAVY EQUIPMENT CHAINS

Laclede™ DUO Grip

- Features H-pattern cross chains which keep the chain on top of the tire
- 3/8” case hardened cross chain
- Sets are available in domestic or import
- Bulk continuous DUO Grip made in the U.S.A.
- For off-road use only

Part Weight Per Cross Replacement

Tire Sizes No. Pair Per 1/2 Pair Chain

9.5-24 9.5-28 11.2-24 702021488 110 8 DU0292

9.5-32 11.2-28 230/95R32 355/80R20 702022688 124 9 DU0292
10.5/80-18 12-16.5 280/70R20 300/70R20 315/75015 702022588 88 6 DU0293
12.4-24 702022988 130 9 DU0293
9.5-36 9.5-38 11.2-32 12.4-28 702021888 143 10 DU0293
11.2-38 11.2-44 12.4-36 12.4-38 270/95R44 702023288 172 12 DU0293
13.9-36 320/85R34 702024288 150 10 DU0294
13.6-24 13.6-26 14.9-24 702024088 141 9 DU0295
14.9-26 702025088 156 10 DU0295
14.9-28 14.9-30 702025288 173 11 DU0295
13.6-28 16.9-24 320/85R38 340/85R28 380/85R34 702026088 160 10 DU0296
14.9-38 15.5-38 320/90R46 702025488 194 12 DU0296
17.5-24 17.5L-24 702026388 135 8 DU0297
16.9-26 16.9-28 420/85R28 702026288 169 10 DU0297
16.9-32 702026688 184 11 DU0297
16.9-34 230/95R44 702027088 200 12 DU0297
18.4-16.1 21.5L-16.1 702026488 132 7 DU0298
18.4-24 19.5L-24 702026888 171 9 DU0298
16.9-30 18.4-26 1 8.4-28 18.4-30 540/65R30
702027188 188 10 DU0298
550/65R25 600/65R28
18.4-34 480/85R34 600/65R25 702027388 206 11 DU0298
16.9-38 18.4-38 20.8-34 380/90R50 420/80R46
702027288 226 12 DU0298
460/85R34 480/80R38
18.4-42 18.4-46 380/90R54 480/80R46 702027277 298 14 DU0298
21L-24 700027588 161 8 DU0299
20.8-38 702027688 259 13 DU0299
24.5-32 23.1-34 28.1-34 620/70R42 650/75R32 702028288 252 12 DU0302

* * Pre-Fit Tire Chain before use **

194 TITAN 2014 / 2015 CATALOGUE

TIRE CHAINS
HEAVY EQUIPMENT CHAINS

Laclede Grader & Heavy Equipment Chains

- Designed for plows,
graders and loaders
- Heavy duty twist link
cross chain
- 2600 series available in
domestic or import
- 2900 series with v-bar
made in the U.S.A.
- Two-link spacing
available upon request

Side Chain Cross Chain

Stock Part Stock Part Wt / Hook
Tire Sizes No. No. Wt / Pr. Gauge Lks. Inches No. No. CPCS PCS / Pr. Gauge Lks. Inches No.
(lbs.) (lbs.)

9/0 6630 9/0

13.00x24 R13375S 700500102 130 59 128 7136-630-88 298 28 17 24.92 320
.375 R5138S .375
9/0 7425 9/0
14.00x24 R1437SS 700501502 128 56 121.5 7137-425-25 311 26 18 26.27 320
.375 RS1730 .375
9/0 7425 9/0
14.00x24 R14375D 700531502 208 56 121.5 7137-425-25 311 52 18 26.27 320
.375 R51730 .375
11/0 6640 11/0
14.00x24 R14437S 700502002 170 50 116.5 7136-640-88 445 24 15 28.2 317
.437 RS246S .437
11/0 6640 11/0
14.00x24 R14437D 700532002 278 50 116.5 7136-640-88 445 48 15 28.2 317
.437 R5246S .437
11/0 14/0
14.00x24 R14500S 700502502 214 50 116.5 N/A N/A N/A 24 14 29.0 317
.437 .531
11/0 14/0
14.00x24 R14SOOD 700532502 332 50 116.5 N/A N/A N/A 44 14 29.0 317
.437 .531
11/0 14/0
16.00x24 R1S500S 700503002 248 59 137.5 N/A N/A N/A 28 14 29.0 317
.437 .531
11/0 14/0
16.00x24 R1SSOOD 700533002 419 59 137.5 N/A N/A N/A 56 14 29.0 317
.437 .531

* * Pre-Fit Tire Chain before use **

TITAN 2014 / 2015 CATALOGUE 195

TIRE CHAINS
SMALL UTILITY CHAINS

Laclede™ Forklift Chains

- Square link alloy cross chains
- Two-link spacing available upon request
Part Weight Cross Chains Replacement
Tire Sizes No. Per Pair Per 1/2 Pair Cross Chain

6.50-10 702210802 15 8 9311

7.50·10 25 X 8.50-14 702211002 19 10 9311
7.00-12 27 X 8.50-15 28 X 9.50-15 8.15-15
702211602 20 11 9311
7.00·15 28 X 9·15 29 X 8·15
7.50·15 702212102 41 13 9311
23 X 10.50-12 702212502 18 9 9313
250-15 27 X 10.50·15 702212902 22 11 9313
8.25-15 702212802 28 14 9313

Laclede™ ATV Chains

- Reinforced cross chain for increased wear and traction
- Two-link spacing available in stock
Part Weight Cross Chains
Tire Sizes No. Per Pair Per 1/2 Pair

23 X 8 X 11 24 X 8 X 11 26 X 8 X 12 782061104 28 17
25 X 8 X 11 25 X 8 X 10 782061204 31 19
22 X 11 X 8 22 X 12 X 8 22 X 11 X 10 22 X 10 X 10
782061504 26 13
23 X 10 X 10
24 X 9 X 11 25 X 10 X 12 24 X 11 X 10 24 X 11 X 9 25 X 8 X 12 782061804 37 19
25 X 13 X 9 25 X 13.5 X 9 25 X 12 X 9 25 X 12 X 10
782062004 36 15
24 X 12 X 10 24 X 13 X 9 24 X 13 X 12

* * Pre-Fit Tire Chain before use **

196 TITAN 2014 / 2015 CATALOGUE

TIRE CHAINS
SMALL UTILITY CHAINS

Laclede™ Alloy Pattern Skid Steer Chains

- 8mm square link alloy cross chains
- Box pattern configuration keeps cross links on top
- Wear bars on cross links for added durability and traction
- Alloy cam style side chain and alloy cross chain hooks
Square Link
Weight Replacement Cross Chain Cross Chains Cross Chain Rim Chain
Cross Chains
Tire Sizes Part No. Per Pair Cross Chain Size Per 1/2 Pair Hook Stock No. Trade Size

12-16.5 702092202 114 6422 8mm 8 394 8mm

15-19.5 702093602 159 6435 8mm 10 394 8mm
14-17.5 702095002 134 6450 8mm 9 394 8mm

Laclede Snow Blower & Garden Tractor Chain

2 Link Spacing 4 Link Spacing
Weight Weight
Tire Sizes Part No. Per Pair Part No. Per Pair

10/10.5 X 2.75 10.25 X 3.25 10 X 3.50 782330104 3 – –

12 X 3 782330804 4 – –
4.10/3.50 X 4 3.40/3.00 X 5 782710604 3 – –
4.10/3.50 X 5 4.10/3.50 X 6 12 X 3.50 X 6 12.25 X 3.50 X 6 782330204 4 – –
2-Link Spacing 4 Link Spacing 5.30/4.50 X 6 782330904 7 – –
13 X 5 X 6 782712904 6 – –
4.00/4.80 X 8 782130104 11 – –
5.00/5.70 X 8 782330304 16 – –
16 X 6.50 X 8 15 X 6.00 X 6 782330004 12 – –
18 X 6.50 X 8 782331204 14 – –
Cross Chain 18 X 8.50 X 8 782330704 15 782331104 10
18 X 9.50 X 8 782330504 16 782330604 10
20 X 10 X 8 20 X 10 X 10 782714504 20 782532004 13
20 X 8.00 X 10 20 X 8 X 8 782130804 19 782531804 11
6 X 12 23 X 7.50 X 12 782531304 19 782531204 11
8 X 12 23 X 8.50 X 12 782430004 22 782430104 13
12 X 12 26 X 12 X 12 27 X 12 X 12 782530804 30 782530004 18
23 X9.50X 12 23 X 10.50 X 12 782530704 25 782530304 15
24 X 12 X 12 782716404 25 –
8 X 15 25 X 8.5 X 14 27 X 8.50 X 15 782130704 28 782130904 18
29 X 12 X 15 782532304 64 782531604 40
12.4·16 31 X 15.5 X 15 33 X 12.5 X 15 782532404 109 782910004 66
8 X 16 782131104 33 782131004 20

* * Pre-Fit Tire Chain before use **

TITAN 2014 / 2015 CATALOGUE 197

TIRE CHAINS
TRUCK CHAINS

Ice Studs
Screw on Ice Studs for Off-Road & Work Vehicles
Every winter, municipalities, lumber yards, MAXIGRIP ice studs also provide a cost
farmers, sportsmen, and homeowners face effective alternative to having a second set
the same problem—poor traction due to of studded winter wheels.
harsh winter conditions. Heavy equipment MAXIGRIP ice studs are easy to install,
such as tractors, fork lifts, and skid steers durable, and can be used season after
have to operate on icy surfaces and season. Do not slip and slide this winter—
demand optimal traction. Dig in with MAXIGRIP.
MAXIGRIP™ ice studs provide a superior
traction option for equipment with low
clearance tolerances that do not allow for
the installation and use of tire chains.

MAXIGRIP HM SIZING INFORMATION The Carbide tip

The HM-11 has a 2.1mm carbide tip/core, a The HM-15 has a 3.4mm carbide tip/core,
hardened, galvanized screw with coarse a hardened, galvanized screw with coarse
threads. The HM-11 is 12mm in length. threads. The HM-11 is 15mm in length.
Recommended minimum tread depth is 11mm. Recommended minimum tread depth
100/box is 14mm. 100/box

Hexagonal head
MaxiGrip HM-18 - Part # 18100 MaxiGrip HM-25 - Part # 25200 for application
and removal with
Compact Loaders | Forklifts | ATVs | Mini-Tractors Tractors | Compact Loaders | Forklifts | ATVs | installation tool
Mini-Tractors
The HM-18 has a 3.4mm carbide tip/core,
a hardened, galvanized screw with coarse The HM-25 has a 3.4mm carbide tip/core,
Hardened and
threads. The HM-18 is 18mm in length. a hardened, galvanized screw with coarse galvanized screw
Recommended minimum tread depth is 17mm. threads. The HM-25 is 25mm in length.
100/box Recommended minimum tread depth is 24mm.
200/box Coarse threads
keep the MaxiGrip
stud in tire
MaxiGrip HM-30 - Part # 30200 MaxiGrip HM-35 - Part #35100
Tractors | Heavy Equipment Tractors | Heavy Equipment | Loaders | Mining
Equipment | Forklifts
The HM-30 has a 3.4mm carbide tip/core,
a hardened, galvanized screw with coarse The HM-35 has a 3.4mm carbide tip/core,
threads. The HM-30 is 30mm in length. a hardened, galvanized screw with coarse
Recommended minimum tread depth is 29mm threads. The HM-35 is 35mm in length.
200/box Recommended minimum tread depth is 34mm
100/box

198 TITAN 2014 / 2015 CATALOGUE

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

BULK CHAINS & HOOKS (pg. 178) CORDAGE

ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

331040D BOOMER HOOK DIVERSIFIED STEEL 43334 ROPE 34 NYLON DOUBLE BRAID CANADA CORDAGE
330100D CLEVIS TIRE CHAIN DIVERSIFIED STEEL 43238 ROPE 38 NYLON 3 STRAND CANADA CORDAGE
333230D HOOK C DIVERSIFIED STEEL 43338 ROPE 38 NYLON DOUBLE BRAID CANADA CORDAGE
66402 LINK 14 LAP REPAIR DYNALINE 43258 ROPE 58 NYLON 3 STRAND PRO-SET CANADA CORDAGE
66404 LINK 38 LAP REPAIR DYNALINE 4311 ROPE 1 MANILA 3 STRAND CONTINENTAL WESTERN
66403 LINK 516X112 LAP REPAIR DYNALINE 4321 ROPE 1 NYLON 3 STRAND PRO-SET CONTINENTAL WESTERN
742922900 ADJUSTER 29229 HEAVY TRUCK LACLEDE 432114 ROPE 114 NYLON 3 STRAND PROSET CONTINENTAL WESTERN
331040L BOOMER 516 SIDE CHAIN W/LINK LACLEDE 43112 ROPE 12 MANILA 3 STRAND CONTINENTAL WESTERN
303130L CROSS CHAIN 12 SMOOTH (1732) LACLEDE 43412 ROPE 12 POLY 3 STRAND YELLOW CONTINENTAL WESTERN
303100L CROSS CHAIN 38 SMOOTH BULK LACLEDE 43134 ROPE 34 MANILA 3 STRAND CONTINENTAL WESTERN
303080L CROSS CHAIN 516 SMOOTH BULK LACLEDE 43610 CORD #10 SASH TIGER 100’ 5/16” SAMSON ROPE
303110L CROSS CHAIN 716 SMOOTH TWIST LACLEDE 43612 CORD #12 SASH TIGER 100’ 3/8” SAMSON ROPE
303070L CROSS CHAIN 932 SMOOTH TWIST LACLEDE 43314AB ROPE 14 AMSTEEL BLUE SAMSON ROPE
331025L END 714F SIDE CHAIN FASTENER LACLEDE 433316AB ROPE 316 AMSTEEL BLUE SAMSON ROPE
333230L1 HOOK 1132 QUICK C LACLEDE 43338AB ROPE 38 AMSTEEL BLUE SAMSON ROPE
320070L HOOK 271 CROSS CHAIN (#78) LACLEDE TAGLINE5825 LINE 58X25 TAG NYLON TITAN
320100L HOOK 38 CROSS CHAIN (#145) LACLEDE
320080L HOOK 516 CROSS CHAIN (#102) LACLEDE
FITTINGS
799045125 HOOK 716 COMET SWIVEL LACLEDE ITEM DESCRIPTION VENDOR
320110L HOOK 716 CROSS CHAIN (#437) LACLEDE
311101L SIDE CHAIN 38 BULK LACLEDE 66426 SNAP 12 SPRING DYNALINE
311081L SIDE CHAIN 516 BULK LACLEDE 66422 SNAP 38 SPRING DYNALINE
742800000 WRENCH T LACLEDE 66425 SNAP 716 SPRING DYNALINE
331030 BOOMER 14 SIDE CHAIN END TRYGG 1027329I HOOK 12 CLEVIS GRAB G70 LACLEDE
331050 BOOMER 38 SIDE CHAIN END 1011 TRYGG 1027249I HOOK 14 CLEVIS GRAB G70 LACLEDE
331040 BOOMER 516 SIDE CHAIN END 89-8 TRYGG 1027285I HOOK 38 CLEVIS GRAB G70 LACLEDE
301095 CROSS CHAIN 38 STUD BULK 9.5mm TRYGG 1027267I HOOK 516 CLEVIS GRAB G70 LACLEDE
301080 CROSS CHAIN 516 STUD BULK TRYGG 1027301I HOOK 716 CLEVIS GRAB G70 LACLEDE
320100 HOOK 38 CROSS CHAIN TRYGG 66420 SNAP 14 SPRING VANGUARD STEEL
320110 HOOK 716 CROSS CHAIN TRYGG 66419 SNAP 316 SPRING VANGUARD STEEL
323080 HOOK 8MM CROSS S2000 TRYGG 66421 SNAP 516 SPRING VANGUARD STEEL
333220 HOOK C 6-7 MM S2000 TRYGG
GENERAL SUPPLIES
333230 HOOK C 932-516 TRYGG
ITEM DESCRIPTION VENDOR
311061C SIDE CHAIN 14 CAM (116”) S2000 TRYGG
311061 SIDE CHAIN 14 HARDENED S2000 TRYGG
FLA22/GR MESH FLAG WITH GROMMETS NORTH SAFETY
311096 SIDE CHAIN 38 (9.5MM) BULK TRYGG
311081 SIDE CHAIN 516 BULK HARD TRYGG HEAVY EQUIPMENT CHAINS (PG. 188-195)
311081C SIDE CHAIN 516X116” CAM PIECES TRYGG ITEM DESCRIPTION VENDOR
311070 SIDE CHAIN 932 BULK HARD TRYGG
344300 WRENCH L TRYGG 700501502 TIRE CHAIN 140024 S REG 38 LACLEDE
66436 LINK 12 QUICK VANGUARD STEEL 700535202 TIRE CHAIN 17525 D 716 TWIST LACLEDE
66432 LINK 14 QUICK VANGUARD STEEL 700262488 TIRE CHAIN 17525 S REG 3/8SIDE LACLEDE
66431 LINK 316 QUICK VANGUARD STEEL 700530002 TIRE CHAIN 20525 DD REG 716 LACLEDE
66434 LINK 38 QUICK VANGUARD STEEL 700510002 TIRE CHAIN 20525 S REG 716 LACLEDE
66433 LINK 516 QUICK VANGUARD STEEL 11100 STUD MAXIGRIP ICE HM11 PREMA
66435 LINK 716 QUICK VANGUARD STEEL 15100 STUD MAXIGRIP ICE HM15 PREMA
30200 STUD MAXIGRIP ICE HM30 PREMA
CORDAGE 35100 STUD MAXIGRIP ICE HM35 PREMA
ITEM DESCRIPTION VENDOR 520222 LINK 22mm REPAIR W/PIN TRYGG
530661 TIRE CHAIN 17525 H PAT 38 TRYGG
4331 ROPE 1 NYLON DOUBLE BRAID CANADA CORDAGE 603762 TIRE CHAIN 17525 SMT 38 TRYGG
433112 ROPE 112 NYLON DOUBLE BRAID CANADA CORDAGE 605762 TIRE CHAIN 17525 SMT 716 TRYGG
433114 ROPE 114 NYLON DOUBLE BRAID CANADA CORDAGE 630264 TIRE CHAIN 20525 FX RING 58 TRYGG
43212 ROPE 12 NYLON 3 STRAND PRO-SET CANADA CORDAGE 530763 TIRE CHAIN 20525 H PAT 716 TRYGG
43312 ROPE 12 NYLON DOUBLE BRAID CANADA CORDAGE 605764 TIRE CHAIN 20525 SMT 716 TRYGG
43214 ROPE 14 NYLON 3 STRAND CANADA CORDAGE 611365 TIRE CHAIN 23126 NET STUD 58 TRYGG
43234 ROPE 34 NYLON 3 STRAND PRO-SET CANADA CORDAGE 611471 TIRE CHAIN 30532 NET STUD 34 TRYGG

TITAN 2014 / 2015 CATALOGUE 199

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

HEAVY EQUIPMENT CHAINS (PG. 188-195) TIE DOWN STRAPS (pg. 173-177)
ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

611371 TIRE CHAIN 30532 NET STUD 58 TRYGG SH15 TIEDOWN 15” RUBBER C/W S-HOOKS ARGUS INDUSTRIES
G200 TIGHTENER TIRE CHAIN G200 WALLINGFORDS SH20 TIEDOWN 20” RUBBER C/W S-HOOKS ARGUS INDUSTRIES
G202 TIGHTENER TIRE CHAIN G202 WALLINGFORDS SH09 TIEDOWN 9” RUBBER C/W S-HOOKS ARGUS INDUSTRIES
1048440C LOAD BINDER 12 58 RATCHET R-C CM
INDUSTRIAL CHAIN 1048422C LOAD BINDER 38 12 RATCHET R-A CM
ITEM DESCRIPTION VENDOR 1048404C LOAD BINDER 516 38 RATCHET R-7 CM
1048440 LOAD BINDER 12 58 RATCHET R-C CROSBY
9701335G CHAIN 38 G70 GOLD ANJI CHANGHONG 1048100 LOAD BINDER 316 14 W-1 MIDGET CROSBY
9701335G20 CHAIN 38X20 G70 ASSY C/W HKS ANJI CHANGHONG 1048146 LOAD BINDER 38 12 A-1 CROSBY
9701350G CHAIN 12 G70 GOLD LACLEDE 1048422 LOAD BINDER 38 12 RATCHET R-A CROSBY
9701320G CHAIN 14 G70 GOLD LACLEDE 1048128 LOAD BINDER 516 38 7-1 CROSBY
9701335GDOM CHAIN 38 G70 GOLD DOMESTIC LACLEDE 1048404 LOAD BINDER 516 38 RATCHET R-7 CROSBY
9701330G CHAIN 516 G70 GOLD LACLEDE 20012C CAP CHAIN DIVERSIFIED STEEL
9701340G CHAIN 716 G70 GOLD LACLEDE 20014C CAP STRAP DIVERSIFIED STEEL
9701350G20 CHAIN 12X20 G70 ASSY C/W HKS TITAN WB1 BAR WINCH STANDARD CHROME DYNALINE
9701335G04H1 CHAIN 38X04 G70 C/W (1)ONE HK TITAN 1048137I LOAD BINDER 38 12 A-1 FAR EAST INDUSTRIAL
9701335G10 CHAIN 38X10 G70 ASSY C/W HKS TITAN 1048422I LOAD BINDER 38 12 RATCHET R-A FAR EAST INDUSTRIAL
9701335G16 CHAIN 38X16 G70 ASSY C/W HKS TITAN 1048128I LOAD BINDER 516 38 7-1 FAR EAST INDUSTRIAL
9701335G18 CHAIN 38X18 G70 ASSY C/W HKS TITAN 1048404I LOAD BINDER 516 38 RATCHET R-7 FAR EAST INDUSTRIAL
9701335G25 CHAIN 38X25 G70 ASSY C/W HKS TITAN 20016 CAP CORNER PLASTIC INTERNATIONAL LANDMARK
9701330G16 CHAIN 516X16 G70 ASSY C/W HKS TITAN DEE2 D RING 2 10000 LBS (MBS) INTERNATIONAL LANDMARK
9701330G20 CHAIN 516X20 GR70 ASSY C/W HKS TITAN FLAT3 HOOK 3 FLAT INTERNATIONAL LANDMARK
9701340G20 CHAIN 716X20 G70 ASSY C/W HKS TITAN WINDER WINDER STRAP INTERNATIONAL LANDMARK
702631502 TIRE CHAIN 2158516 S VBAR 932 LACLEDE CAM1 BUCKLE 1 CAM JULI HOLDING
702631542 TIRE CHAIN 2158516 S VBAR 932C LACLEDE CAM2 BUCKLE 2 CAM JULI HOLDING
702103807 TIRE CHAIN 2257015 S CABLE LACLEDE 3DCH D RING 3X18 CHAIN & HOOK JULI HOLDING
700525502 TIRE CHAIN 2257015 S REG 1564 LACLEDE DEE4 D RING 4 JULI HOLDING
700625502 TIRE CHAIN 2257015 S VBAR V255 LACLEDE WIRE1 HOOK 1 WIRE DOUBLE J JULI HOLDING
702264588 TIRE CHAIN 23525 S REG 12 LACLEDE FLAT2 HOOK 2 FLAT JULI HOLDING
702632002 TIRE CHAIN 2358516 S VBAR 932 LACLEDE WIRE2 HOOK 2 WIRE DOUBLE J JULI HOLDING
702632042 TIRE CHAIN 2358516 S VBAR 932C LACLEDE FLAT4 HOOK 4 FLAT JULI HOLDING
702672002 TIRE CHAIN 2358516 T VBAR 932 LACLEDE RAT1 RATCHET 1 BUCKLE JULI HOLDING
702672042 TIRE CHAIN 2358516 T VBAR 932C LACLEDE RAT2 RATCHET 2 BUCKLE JULI HOLDING
702633202 TIRE CHAIN 25570225 S VBAR 932 LACLEDE 210RW RATCHET 2X10 WIRE HOOK JULI HOLDING
702633242 TIRE CHAIN 25570225 S VBAR 932 LACLEDE 215RF RATCHET 2X15 FLAT HOOK JULI HOLDING
702382942 TIRE CHAIN 285/75R16 S VBAR CA LACLEDE 215RW RATCHET 2X15 WIRE HOOK JULI HOLDING
782330704 TIRE CHAIN 3307G SNOWBLOWER LACLEDE 220RF RATCHET 2X20 FLAT HOOK JULI HOLDING
700637764 TIRE CHAIN 44565225 S VBR 516C LACLEDE 220RW RATCHET 2X20 WIRE HOOK JULI HOLDING
702326902 TIRE CHAIN 45555225 S REG CAM LACLEDE 225RW RATCHET 2X25 WIRE HOOK JULI HOLDING
780530804 TIRE CHAIN 5308G SNOWBLOWER LACLEDE 230RF RATCHET 2X30 FLAT HOOK JULI HOLDING
782061804 TIRE CHAIN 618 ATV 2-LINK LACLEDE 230RW RATCHET 2X30 WIRE HOOK JULI HOLDING
782714504 TIRE CHAIN 7145G SNOWBLOWER LACLEDE RAT3 RATCHET 3 BUCKLE JULI HOLDING
702632242 TIRE CHAIN 75020 S VBAR 932 C LACLEDE RAT4 RATCHET 4 BUCKLE JULI HOLDING
700672242 TIRE CHAIN 75020 T VBAR 516C LACLEDE 110WDBL RATCHET ASSY 1X10 MINI BLACK JULI HOLDING
700631202 TIRE CHAIN 875165 S VBAR 932 LACLEDE 116WDBL RATCHET ASSY 1X16 MINI BLACK JULI HOLDING
700631242 TIRE CHAIN 875165 S VBAR 932C LACLEDE 116WDRO RATCHET ASSY 1X16 MINI [Link] JULI HOLDING
702022588 TIRE CHAIN DUO 225 TRACTOR LACLEDE 120WDBL RATCHET ASSY 1X20 MINI BLACK JULI HOLDING
702024088 TIRE CHAIN DUO 240 TRACTOR LACLEDE 330RF RATCHET ASSY 3X30 FLAT HOOK JULI HOLDING
702025288 TIRE CHAIN DUO 252 TRACTOR LACLEDE 430RF RATCHET ASSY 4X30 FLAT HOOK JULI HOLDING
702026088 TIRE CHAIN DUO 260 TRACTOR LACLEDE 230CF STRAP 2X30 CARGO FLAT HOOK JULI HOLDING
702026288 TIRE CHAIN DUO 262 TRACTOR LACLEDE 330CF STRAP 3X30 CARGO FLAT HOOK JULI HOLDING
702026388 TIRE CHAIN DUO 263 TRACTOR LACLEDE 430CDCH STRAP 4X30 CARGO CHAIN & HOOK JULI HOLDING
702027188 TIRE CHAIN DUO 271 TRACTOR LACLEDE 430CD STRAP 4X30 CARGO D RING JULI HOLDING
702027288 TIRE CHAIN DUO 272 TRACTOR LACLEDE 430CF STRAP 4X30 CARGO FLAT HOOK JULI HOLDING
702027388 TIRE CHAIN DUO 273 TRACTOR LACLEDE 440CD STRAP 4X40 CARGO D RING JULI HOLDING
702027688 TIRE CHAIN DUO 276 TRACTOR LACLEDE 440CF STRAP 4X40 CARGO FLAT HOOK JULI HOLDING
WB2 BAR WINCH COMBINATION SECURITY CHAIN

200 TITAN 2014 / 2015 CATALOGUE

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

TIE DOWN STRAPS (pg. 173-177) STUDDED TRUCK CHAINS (PG. 183-184)
ITEM DESCRIPTION VENDOR ITEM DESCRIPTION VENDOR

DEE3 D RING 3 SECURITY CHAIN 307081 CROSS CHAIN 516X10 LINK STUD TRYGG
WIRE3 HOOK 3-4 WIRE DOUBLE J SECURITY CHAIN 307083 CROSS CHAIN 516X11 LINK STUD TRYGG
H51250958 LOAD BINDER 12 58 QUIKBINDER SECURITY CHAIN 307085 CROSS CHAIN 516X12 LINK STUD TRYGG
H51250858 LOAD BINDER 38 12 QUIKBINDER SECURITY CHAIN 307088 CROSS CHAIN 516X16 LINK STUD TRYGG
H51250658 LOAD BINDER 516 38 QUIKBINDER SECURITY CHAIN 307284 CROSS CHAIN 7MMX11 STUD W/HOOK TRYGG
RAT2SH RATCHET 2” SHORT HANDLE SECURITY CHAIN 520210 LINK #10 REPAIR W/PIN TRYGG
WINCH2 WINCH SLIDING WELD ON (#3820) SECURITY CHAIN 520213 LINK #13 REPAIR W/PIN TRYGG
WINCH6 WINCH WELD ON (#1820) SECURITY CHAIN 452385 TIRE CHAIN 1122 DD 516 TRYGG
BINDERLOC LOAD BINDER SECUREMENT SLING S’N T 460231 TIRE CHAIN 1122 S 516 C TRYGG
CARGO134 STRAP 134 CARGO BULK SOUTHERN WEAVING 464231 TIRE CHAIN 1122 T 516 C TRYGG
CARGO2 STRAP 2 CARGO BULK SOUTHERN WEAVING 460201 TIRE CHAIN 11225 S 516 C TRYGG
CARGO230 STRAP 2X30 CARGO SOUTHERN WEAVING 490374 TIRE CHAIN 11225 S 932 S2000 TRYGG
CARGO3 STRAP 3 CARGO BULK SOUTHERN WEAVING 491374 TIRE CHAIN 11225 S 932 S2000 C TRYGG
CARGO4 STRAP 4 CARGO BULK SOUTHERN WEAVING 477100 TIRE CHAIN 11225 S SCAN TRAC TRYGG
CARGO430 STRAP 4X30 CARGO PRE-CUT SOUTHERN WEAVING 464200 TIRE CHAIN 11225 T 516 TRYGG
5X6TRUCKNET NET 5’X6’ TRUCK MESH TITAN 464201 TIRE CHAIN 11225 T 516 C TRYGG
5X8TRUCKNET NET 5’X8’ TRUCK 1” MESH TITAN 495374F TIRE CHAIN 11225 T 932 C FRAM TRYGG
112TSR RATCHET 1X12 TORPEDO STRAP TITAN 494374 TIRE CHAIN 11225 T 932 S2000 TRYGG
2RDW RATCHET 2 DEAD END WIRE HOOK TITAN 495374 TIRE CHAIN 11225 T 932 S2000 C TRYGG
206TSR RATCHET 2X06 TORPEDO STRAP TITAN 477101 TIRE CHAIN 11225 T SCAN TRAC TRYGG
225RF RATCHET 2X25 FLAT HOOK TITAN 460221H TIRE CHAIN 11245 S (HYBRID) C TRYGG
4RDF RATCHET ASSY 4 DEADEND & FL HK TITAN 460220 TIRE CHAIN 11245 S 516 TRYGG
203TS STRAP 2X03 TORPEDO TITAN 460221 TIRE CHAIN 11245 S 516 C TRYGG
204TS STRAP 2X04 TORPEDO TITAN 460225 TIRE CHAIN 11245 S 516 C TRYGG
206TS STRAP 2X06 TORPEDO TITAN 490375 TIRE CHAIN 11245 S 932 S2000 TRYGG
215CW STRAP 2X15 CARGO WIRE HOOK TITAN 491375 TIRE CHAIN 11245 S 932 S2000 C TRYGG
415CF STRAP 4X15 CARGO FLAT HOOK TITAN 477110 TIRE CHAIN 11245 S SCAN TRAC TRYGG
116WRO RATCHET ASSY 1X16 MINI [Link] YEU YUEH 464221H TIRE CHAIN 11245 T (HYBRID) C TRYGG
CARGOBAR1 RATCHETING CARGO BAR (Y-712) YEU YUEH 464220 TIRE CHAIN 11245 T 516 TRYGG
106RTD2 RETRACTABLE TIE DOWN 1X06 YEU YUEH 464224 TIRE CHAIN 11245 T 516 TRYGG
464221 TIRE CHAIN 11245 T 516 C TRYGG
TOWING (PG. 179) 464225 TIRE CHAIN 11245 T 516 C TRYGG
ITEM DESCRIPTION VENDOR 464221F TIRE CHAIN 11245 T 516 C FRAM TRYGG
495375F TIRE CHAIN 11245 T 932 C FRAM TRYGG
PAL180 STRAP 2X20 TOW 1PLY W/EYES INTERNATIONAL LANDMARK 494375 TIRE CHAIN 11245 T 932 S2000 TRYGG
PAL2180 STRAP 2X20 TOW 2PLY W/EYES INTERNATIONAL LANDMARK 495375 TIRE CHAIN 11245 T 932 S2000 C TRYGG
PAL270 STRAP 3X20 TOW 1PLY W/EYES INTERNATIONAL LANDMARK 477111 TIRE CHAIN 11245 T SCAN TRAC TRYGG
PAL2270 STRAP 3X20 TOW 2PLY W/EYES INTERNATIONAL LANDMARK 460223 TIRE CHAIN 12225 S 516 C TRYGG
PAL360 STRAP 4X20 TOW 1PLY W/EYES INTERNATIONAL LANDMARK 464222 TIRE CHAIN 12225 T 516 TRYGG
PAL2360 STRAP 4X20 TOW 2PLY W/EYES INTERNATIONAL LANDMARK 464223 TIRE CHAIN 12225 TPL 516 C TRYGG
PAL2450 STRAP 5X20 TOW 2PLY W/EYES INTERNATIONAL LANDMARK 464632 TIRE CHAIN 1224 T 38 TRYGG
PAL2540 STRAP 6X20 TOW 2PLY W/EYES INTERNATIONAL LANDMARK 464637 TIRE CHAIN 1224 T 38 (11LK) TRYGG
PAL3540 STRAP 6X20 TOW 3PLY W/EYES INTERNATIONAL LANDMARK 460638 TIRE CHAIN 1424 S 38 TRYGG
PAL2540X25 STRAP 6X25 TOW 2PLY W/EYES INTERNATIONAL LANDMARK 464636 TIRE CHAIN 1424/25 T 38 TRYGG
PAL2720 STRAP 8X20 TOW 2PLY W/EYES INTERNATIONAL LANDMARK 500271 TIRE CHAIN 17525 DD 38 TRYGG
PAL2720X30 STRAP 8X30 TOW 2PLY W/EYES INTERNATIONAL LANDMARK 501271 TIRE CHAIN 17525 S 38 TRYGG
DB10820S TOWROPE 112X20 NYLON DB SOFT TITAN 460071 TIRE CHAIN 2358516 S 932 C TRYGG
DB10020S TOWROPE 1X20 NYLON DB SOFT TITAN 460073 TIRE CHAIN 24570195 S 932 C TRYGG
PAL4540 STRAP 6X20 TOW 4PLY W/EYES TITAN 464073 TIRE CHAIN 24570195 T 932 C TRYGG
PAL2720X25 STRAP 8X25 TOW 2PLY W/EYES TITAN 452924 TIRE CHAIN 38565225 DD 516 TRYGG
492424 TIRE CHAIN 38565225 DD932S2000 TRYGG
STUDDED TRUCK CHAINS (PG. 183-184) 450924 TIRE CHAIN 38565225 S 516 TRYGG
ITEM DESCRIPTION VENDOR 457424 TIRE CHAIN 38565225 S 516 C TRYGG
491424 TIRE CHAIN 38565225 S932S2000C TRYGG
307126 CROSS CHAIN 38X13 LINK W/11MM TRYGG 452444 TIRE CHAIN 42565225 DD 516 TRYGG
307122 CROSS CHAIN 38X9 LINK W/11 HKS TRYGG 492444 TIRE CHAIN 42565225 DD932S2000 TRYGG
307681H CROSS CHAIN 516X10 LINK H STUD TRYGG 450944 TIRE CHAIN 42565225 S 516 TRYGG

TITAN 2014 / 2015 CATALOGUE 201

INVENTORY LISTINGS
Please note that not all product
listed here is featured in the catalogue.

STUDDED TRUCK CHAINS (PG. 183-184)

ITEM DESCRIPTION VENDOR

457444 TIRE CHAIN 42565225 S 516 C TRYGG

452895 TIRE CHAIN 44565225 DD 516 TRYGG
492446 TIRE CHAIN 44565225 DD932S2000 TRYGG
450895 TIRE CHAIN 44565225 S 516 TRYGG
457895 TIRE CHAIN 44565225 S 516 C TRYGG

V-BAR TIRE CHAINS (pg. 185-187)

ITEM DESCRIPTION VENDOR

711C PLIER 711 TIRE CHAIN 32” APEX TOOL

711D PLIER 711 TIRE CHAIN 32” INTERNATIONALLANDMARK
713686325 CROSS CHAIN 516X10 LINK VBAR LACLEDE
713686625 CROSS CHAIN 516X11 LINK VBAR LACLEDE
700731225 CROSS CHAIN 516X12 LINK VBAR LACLEDE
700721125 CROSS CHAIN 932X11 LINK VBAR LACLEDE
700721225 CROSS CHAIN 932X12 LINK VBAR LACLEDE
700720925 CROSS CHAIN 932X9 LINK VBAR LACLEDE
702082202 TIRE CHAIN 0822 ROADMASTER LACLEDE
700634202 TIRE CHAIN 10225 S VBAR 932 LACLEDE
702204503 TIRE CHAIN 11225 S CABLE 2045 LACLEDE
700284764 TIRE CHAIN 11225 S VBAR 516C LACLEDE
702634302 TIRE CHAIN 11225 S VBAR 932 LACLEDE
702634342 TIRE CHAIN 11225 S VBAR 932C LACLEDE
702635742 TIRE CHAIN 1124 S VBAR 516C LACLEDE
700632222 TIRE CHAIN 12165 S VBAR 516 LACLEDE
700635542 TIRE CHAIN 12225 S VBAR 516C LACLEDE
700675542 TIRE CHAIN 12225 T VBAR 516C LACLEDE
700635602 TIRE CHAIN 12245 S VBAR 516 LACLEDE
702635642 TIRE CHAIN 12245 S VBAR 516C LACLEDE
702210802 TIRE CHAIN 2108FL FORKLIFT LACLEDE
702211602 TIRE CHAIN 2116FL FORKLIFT LACLEDE
702212102 TIRE CHAIN 2121FL FORKLIFT LACLEDE
702212802 TIRE CHAIN 2128FL FORKLIFT LACLEDE
702212902 TIRE CHAIN 2129FL FORKLIFT LACLEDE

202 TITAN 2014 / 2015 CATALOGUE

We are proud to stand behind quality products
from these leading manufacturers:

The Caldwell Group

A WireCo® WorldGroup Brand

[Link]
2014 / 2015 CATALOGUE

CONTACT

[Link]

Final MAZZ-eBooks-Lifting Slings Types Terms
No ratings yet
Final MAZZ-eBooks-Lifting Slings Types Terms
48 pages
Wire Rope Sling Guide & Specs
No ratings yet
Wire Rope Sling Guide & Specs
22 pages
ASME B30.23 - 2005 Personnel Lifting Systems - Scope
100% (1)
ASME B30.23 - 2005 Personnel Lifting Systems - Scope
12 pages
BS 7166-1989 Wedge and Socket Anchorage For Wire Rope
No ratings yet
BS 7166-1989 Wedge and Socket Anchorage For Wire Rope
12 pages
SHELL SMEP Lifting and Hoisting Manual Rev 1 0
No ratings yet
SHELL SMEP Lifting and Hoisting Manual Rev 1 0
349 pages
Certex - Product - Catalogue - Technical Section - Guides - Safe Use - Operating Instructions Etc
No ratings yet
Certex - Product - Catalogue - Technical Section - Guides - Safe Use - Operating Instructions Etc
82 pages
As 1353.1-1997 Flat Synthetic-Webbing Slings Product Specification
0% (1)
As 1353.1-1997 Flat Synthetic-Webbing Slings Product Specification
7 pages
BS 1290.1983 Spec For Wire Rope Slings and Sling Legs For General Lifting Purposes
No ratings yet
BS 1290.1983 Spec For Wire Rope Slings and Sling Legs For General Lifting Purposes
20 pages
As 3585-2008 End Fittings For Synthetic Flat-Webbing and Round Slings
0% (1)
As 3585-2008 End Fittings For Synthetic Flat-Webbing and Round Slings
7 pages
Pulley Tackle and Hoists Standards Overview
No ratings yet
Pulley Tackle and Hoists Standards Overview
8 pages
0.1 SI - 11 - Hand - Chain - Block - SI - 11.4
No ratings yet
0.1 SI - 11 - Hand - Chain - Block - SI - 11.4
2 pages
Wire Rope Sling Capacity Guide
100% (1)
Wire Rope Sling Capacity Guide
6 pages
Asme B30.22-2000
No ratings yet
Asme B30.22-2000
39 pages
LOLER & PUWER Compliance Guide
No ratings yet
LOLER & PUWER Compliance Guide
16 pages
BS 3243 Hand Oprated Chain Blocks PDF
No ratings yet
BS 3243 Hand Oprated Chain Blocks PDF
15 pages
Sling Mode Factor Chart
No ratings yet
Sling Mode Factor Chart
1 page
Wstda-T-2 (2017)
No ratings yet
Wstda-T-2 (2017)
17 pages
Asme B30.23 2022
100% (1)
Asme B30.23 2022
38 pages
Usa Wstda Standard Wstda WS 1 For Synthetic Web Slings
No ratings yet
Usa Wstda Standard Wstda WS 1 For Synthetic Web Slings
39 pages
Offshore Crane and Lifting Operations - Brady Marine & Civil
No ratings yet
Offshore Crane and Lifting Operations - Brady Marine & Civil
14 pages
Rigging For Engineers
No ratings yet
Rigging For Engineers
10 pages
Rci BS 7262
No ratings yet
Rci BS 7262
3 pages
Loler 98
No ratings yet
Loler 98
68 pages
Wirelock Instruction
0% (1)
Wirelock Instruction
17 pages
Iso 7597 1987
No ratings yet
Iso 7597 1987
8 pages
Yale VSIII Hand Chain Hoist Overview
No ratings yet
Yale VSIII Hand Chain Hoist Overview
8 pages
NOV, Catálogo, Pág 63de 122alavanca - 67de122desgaste
No ratings yet
NOV, Catálogo, Pág 63de 122alavanca - 67de122desgaste
124 pages
ASME B30.4-2015 - Postal and Pedestal Cranes
100% (1)
ASME B30.4-2015 - Postal and Pedestal Cranes
46 pages
Asme 3
100% (1)
Asme 3
38 pages
Wstda Round Slings
0% (1)
Wstda Round Slings
38 pages
Asli Bs7262
100% (1)
Asli Bs7262
26 pages
Asme B30.5 - 2004
No ratings yet
Asme B30.5 - 2004
56 pages
Indg290 - A Simple Guide To LOLER
100% (1)
Indg290 - A Simple Guide To LOLER
8 pages
Asme B30 7 2001 Base Mounted Drum Hoists PDF
No ratings yet
Asme B30 7 2001 Base Mounted Drum Hoists PDF
29 pages
4991 2004
0% (2)
4991 2004
9 pages
Effect of Sling Angle Lifting and Rigging Practice
No ratings yet
Effect of Sling Angle Lifting and Rigging Practice
1 page
Iso 8792 1986
No ratings yet
Iso 8792 1986
9 pages
Crane Wire Rope Safety Analysis
100% (3)
Crane Wire Rope Safety Analysis
14 pages
Wire Rope Identification & Construction Guide
No ratings yet
Wire Rope Identification & Construction Guide
3 pages
Sling Safety and Inspection Guidelines
No ratings yet
Sling Safety and Inspection Guidelines
7 pages
Chain Slings Manual
100% (2)
Chain Slings Manual
60 pages
Determine Shock Loads
No ratings yet
Determine Shock Loads
7 pages
Wire Ropes - Bridon Rope - BAC - Technical
No ratings yet
Wire Ropes - Bridon Rope - BAC - Technical
25 pages
BS 2830 Suspended Access PDF
No ratings yet
BS 2830 Suspended Access PDF
46 pages
EIAC-RQ-IB-002 I1 Rev 2 1aWaExO
No ratings yet
EIAC-RQ-IB-002 I1 Rev 2 1aWaExO
15 pages
Slings CSAO
No ratings yet
Slings CSAO
35 pages
Rigging and Lifting Notes Muhammad Ali
No ratings yet
Rigging and Lifting Notes Muhammad Ali
50 pages
Synthetic Polyester Roundslings: Recommended Standard Specification
No ratings yet
Synthetic Polyester Roundslings: Recommended Standard Specification
38 pages
Hooks: ASME B30.10-2005
100% (1)
Hooks: ASME B30.10-2005
26 pages
Chain&Accessories
No ratings yet
Chain&Accessories
57 pages
Rigging Yearbook 2012
No ratings yet
Rigging Yearbook 2012
29 pages
AS Round Sling 4497.1-1997
No ratings yet
AS Round Sling 4497.1-1997
21 pages
Rigging Information: Wire Rope Sling Connections and Hitches
No ratings yet
Rigging Information: Wire Rope Sling Connections and Hitches
1 page
Performance Standard For Air Wire Rope Hoists: ASME HST-6 2015
50% (2)
Performance Standard For Air Wire Rope Hoists: ASME HST-6 2015
4 pages
Basic Sling
No ratings yet
Basic Sling
15 pages
Sling Guide
No ratings yet
Sling Guide
10 pages
Wire Rope Sling Guide for Rigging
No ratings yet
Wire Rope Sling Guide for Rigging
9 pages
Wire Rope Sling Capacity and Specs
No ratings yet
Wire Rope Sling Capacity and Specs
3 pages
Mazzella SlingsWLLPocketGuide Pgs 0121
No ratings yet
Mazzella SlingsWLLPocketGuide Pgs 0121
10 pages
107429wire Rope
No ratings yet
107429wire Rope
26 pages
En 795
0% (1)
En 795
3 pages
Forklift Safety Brochure
No ratings yet
Forklift Safety Brochure
8 pages
Loler Matrix 2018 Colour 0
100% (3)
Loler Matrix 2018 Colour 0
1 page
Vam Tubular Standards
100% (9)
Vam Tubular Standards
84 pages
Lifting
No ratings yet
Lifting
140 pages
Loler Matrix 2017 PDF
No ratings yet
Loler Matrix 2017 PDF
1 page
BS 7121-1 Code of Practice For Safe Use of Crane PDF
100% (1)
BS 7121-1 Code of Practice For Safe Use of Crane PDF
36 pages
Cultural Heritage
No ratings yet
Cultural Heritage
9 pages
Pakistan Statistical Year Book 2015
No ratings yet
Pakistan Statistical Year Book 2015
521 pages
Sonic1200M en
No ratings yet
Sonic1200M en
2 pages
2011-2012 Head I.supershape Titan Skis Specs
No ratings yet
2011-2012 Head I.supershape Titan Skis Specs
6 pages
FNAF
No ratings yet
FNAF
1 page
Express Avenue Food Court Analysis
No ratings yet
Express Avenue Food Court Analysis
14 pages
05 2024 Chukurna
No ratings yet
05 2024 Chukurna
9 pages
Hua Cheng Crochet Pattern
50% (2)
Hua Cheng Crochet Pattern
6 pages
Republic of The Philippines Carig, Tuguegarao City College of Engineering
No ratings yet
Republic of The Philippines Carig, Tuguegarao City College of Engineering
2 pages
David Steele's New Book, "Camera Man: Zooming in On A World at War," Is A Fascinating True Story That Centers Around A Signal Corps Photography Unit During WWII
No ratings yet
David Steele's New Book, "Camera Man: Zooming in On A World at War," Is A Fascinating True Story That Centers Around A Signal Corps Photography Unit During WWII
3 pages
2021 Pba Philippine Cup Schedule
No ratings yet
2021 Pba Philippine Cup Schedule
4 pages
The National Rifle Association of India: Competitor Card
No ratings yet
The National Rifle Association of India: Competitor Card
4 pages
Trac Nghiem On Thi Vao Lop 6 Truong Chuyen
No ratings yet
Trac Nghiem On Thi Vao Lop 6 Truong Chuyen
39 pages
Soccer Skills Training Guide
No ratings yet
Soccer Skills Training Guide
7 pages
Record World US Record Charts 1977 (Singles and LP's - Not Complete)
100% (2)
Record World US Record Charts 1977 (Singles and LP's - Not Complete)
184 pages
RC 1976 10
No ratings yet
RC 1976 10
68 pages
Mistika823 Shortcuts
No ratings yet
Mistika823 Shortcuts
8 pages
Elizabethan Language Terms
100% (1)
Elizabethan Language Terms
2 pages
Mordheim Vampire Bloodlines
No ratings yet
Mordheim Vampire Bloodlines
7 pages
Arrival & Break and Dispersal Duties From 19 September 2022
No ratings yet
Arrival & Break and Dispersal Duties From 19 September 2022
7 pages
At The Jazz Band Ball
No ratings yet
At The Jazz Band Ball
1 page
Macbeth
No ratings yet
Macbeth
3 pages
Waterproof LED Par Light Pricing
No ratings yet
Waterproof LED Par Light Pricing
37 pages
Service Idea: Group No-6
No ratings yet
Service Idea: Group No-6
3 pages
Godox X1TS 20160405 PDF
No ratings yet
Godox X1TS 20160405 PDF
13 pages
Class III Holiday Assigment
No ratings yet
Class III Holiday Assigment
8 pages
Inventory List of Electronics and Accessories
No ratings yet
Inventory List of Electronics and Accessories
6 pages
Shakespearean Theatre and Audience
No ratings yet
Shakespearean Theatre and Audience
5 pages
Force Unleashed 2
No ratings yet
Force Unleashed 2
2 pages
Twitter's Growth Strategies and Challenges
No ratings yet
Twitter's Growth Strategies and Challenges
6 pages
Backing Tracks (Links)
No ratings yet
Backing Tracks (Links)
4 pages
Revised MS Pressure Test of Dn400 Pipelie
100% (1)
Revised MS Pressure Test of Dn400 Pipelie
4 pages
Portugal Tourism Investment Guide
100% (1)
Portugal Tourism Investment Guide
56 pages