Wireless Client Bridge/AP/ WDS ECB-8610S

2.4&5GHz 802.11 a/b/g 54 Mbps

The Wireless High Power and High Gain Multi-Client
Bridge/Access Point/ WDS (wireless distribution system) operates
seamlessly in the dual band 2.4/5 GHz frequency spectrum
supporting the 802.11b (2.4GHz, 11Mbps) and the newer, faster
802.11g (2.4GHz, 54Mbps)/ 802.11a (5GHz, 54Mbps) wireless
standards. It's the best way to add wireless capability to your
existing wired network, or to add bandwidth to your wireless
installation.

To protect your wireless connectivity, it can encrypt all wireless

transmissions through 64/128-bit WEP data encryption and also
supports WPA. The MAC address filter lets you select exactly which stations should have access to
your network. With the Wireless Multi-Client Bridge/Access Point/WDS, you'll experience the best
wireless connectivity available today.

Features Benefits
High Speed Data Rate Up to 54Mbps Capable of handling heavy data payloads such as
MPEG video streaming
High Output Power up to 28dBm Excellent output power spreads the operation distance

IEEE 802.11a/b/g Compliant Fully Interoperable with IEEE 802.11a/b/g compliant

devices
Point-to-point, Point-to-multipoint Wireless Let users transfer data between two buildings or
Connectivity multiple buildings
Plug and Play No driver needed, easy and quick to connect your
Ethernet device to Wireless

WPA/WPA2/ IEEE 802.1x support Powerful data security

Hide SSID (AP Mode) Avoids unallowable users sharing bandwidth,
increases efficiency of the network
DHCP Client/ Server Simplifies network administration

WDS (Wireless Distributed System) Make wireless AP and Bridge mode simultaneously
as a wireless repeater
MAC address filtering (AP Mode) Ensures secure network connection

Power-over-Ethernet (IEEE802.3af) Flexible Access Point locations and cost savings

Layer 2 isolation (AP mode) Improved the security of each client

* Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g chipset used. Actual throughput may
vary. Network conditions and environmental factors lower actual throughput rate.

** All specifications are subject to change without notice. 6/10/2008

 Technical Specifications
Data Rates • 2.412~2.472G(IEEE802.11b) Management
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, -90dBm@ 11Mbps;
-95dBm@ 1Mbp Configuration
48, 54 Mbps
Web-based configuration (HTTP)
Standards Available Transmit Power
Telnet Configuration
IEEE802.11a/b/g, IEEE802.3, (Typical) SNMP V1, V2c, MIBI&II
IEEE802.3u, IEEE802.3af,
• 4.92~5.08 & 5.18~5.32 Firmware Upgrade
IEEE802.1f, IEEE802.1x
GHz(IEEE802.11a) Upgrade firmware via web-browser
Compatibility 23dBm @6 ~ 24Mbps
IEEE 802.11a/b/g Environmental
21dBm @36Mbps
Power Requirements 19dBm @48Mbps Temperature Range
Power Supply: 90 to 240 VDC ± 10 18dBm @54Mbps Operating: 0°C to 45°C
(32°F to 113°F)
％ (depends on different countries) • 5.500~5.700GHz(IEEE802.11a)
Storage: -20°Cto 70°C
Device: 12 V/ 1A 22dBm @6 ~ 24Mbps (-4°F to 158°F)
Status LEDs 20dBm @36Mbps
LAN: Link, WLAN: Link, Power: 18dBm @48Mbps
Humidity (non-condensing)
on/off 17dBm @54Mbps
5%~95% Typical
Regulation Certifications • 5.745~5.85GHz (IEEE802.11a)
21dBm @6 ~ 24Mbps Package Contents
FCC Part 15 B & C,
19dBm @36Mbps One Client Bridge Unit
CE: EN 300328, EN 301489, One Power Adapter
17dBm @48Mbps
EN 60950 One CAT5 UTP Cable
16dBm @54Mbps
RF Information One Quick Start Guide
• 2.4~2.462G(IEEE802.11g)
One CD-ROM with User’s Manual
Frequency Band 26dBm @6 ~ 24Mbps
802.11a: 24dBm@36Mbps
4.92~5.08GHz 23 dBm@48Mbps
5.18~5.32GHz, 22dBm@54Mbps
5.50~5.70GHz,
• 2.4~2.462G(IEEE802.11b)
5.745~5.85GHz
Up to 28dBm @1, 2, 5.5 and
802.11b/g: U.S., Europe and Japan
11Mbps
product covering 2.4 to 2.484 GHz,
programmable for different country RF Connector
regulations TNC Type (Female Reverse)
Media Access Protocol Networking
Carrier Sense Multiple Access with Topology
Collision Avoidance (CSMA/CA)
Ad-Hoc, Infrastructure
Modulation Technology
Operation Mode
Orthogonal Frequency Division
Multiplexing (OFDM) Point-to-Point/ Point-to-Multipoint
DBPSK @ 1Mbps Bridge/ AP/ Client Bridge/ WDS
DQPSK @2Mbps Interface
CCK @ 5.5 & 11Mbps Wireless IEEE802.11b/g
BPSK @ 6 and 9 Mbps One 10/100Mbps RJ-45 LAN Port
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36 Mbps Security
64-QAM @ 48 and 54 Mbps z WPA /WPA2/ Pre Share KEY
Receive Sensitivity (Typical) (PSK) with TKIP/AES
z MAC address filtering (AP only)
• 5.15~5.85G(IEEE802.11a) z Hide SSID in beacons
-88dBm@ 6Mbps; z VLAN Pass-through
-70dBm@ 54Mbps z L2 Isolation (AP mode)
• 2.412~2.472G(IEEE802.11g)
-90dBm @ 6Mbps IP Auto-configuration
-74dBm @ 54Mbps DHCP client/server

* Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g chipset used. Actual throughput
may vary. Network conditions and environmental factors lower actual throughput rate.

** All specifications are subject to change without notice. 6/10/2008