Alamein Downtown Towers
SECTION 067300 - COMPOSITE DECKING
PART 1 - GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and Division 01 Specification Sections, apply to this Section.
1.2 SUMMARY
A. Section Includes:
1. Composite Decking around outdoor swimming pool mounted on adjustable Injection
molded pedestals.
B. Related Sections:
1. Division 01 Section "Product Requirements” regarding submittals and substitutions
of products.
2. Division 06 Section "Rough Carpentry” regarding Timber Joists.
1.3 REFERENCES
A. ASTM D-7032-04: Standard Specification for Establishing Performance Ratings for Wood-
Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails), ASTM
International.
B. ASTM D-7031-04: Standard Guide for Evaluating Mechanical and Physical Properties of
Wood-Plastic Composite Products, ASTM International.
C. ASTM E-84-01: Test Method for Surface Burning Characteristics of Building Materials,
ASTM International
D. ASTM D 570: Water Absorption of Plastics
E. ASTM D 1761: Mechanical Fasteners in Wood
F. ASTM D -1413-99: Test method for Wood Preservatives by Laboratory Soil-block
Cultures.
G. ASTM C177: Standard Test Method for Steady-State Heat Flux Measurements and Thermal
Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
1.4 PERFORMANCE REQUIREMENTS
A. Structural Performance:
1. Deck: Uniform Load – 100l bf/sq.ft.
COMPOSITE DECKING 067300 - Page 1 of 4
REV 00
Alamein Downtown Towers
2. Tread of Stairs: Concentrated Load: 750 lf/sq.ft., and 1/8” max. Deflection with a
concentrated load of 300 lbf on area of 4 sq. in.
B. Fire-Test Response Characteristics per ASTM E-84.
C. Seismic loads as per UBC 1997 and based on Dubai Municipality regulations: Zone 2B.
1.5 SUBMITTALS
A. Product Data: Indicate sizes, profiles, surface style, and performance characteristics.
B. Shop Drawings: Include plans, elevations, sections, details, and attachments to other work.
C. Samples: For each product specified, one sample representing actual product color, size, and
finish.
1. One composite wood unit.
2. One Injection molded pedestal
D. Qualification Data: For qualified Installer.
E. Maintenance Data: For composite wood to include in maintenance manuals.
1.6 QUALITY ASSURANCE
A. Local Regulations and Codes: Comply with applicable requirements of the laws, codes, and
regulations of authorities having jurisdiction.
1. Obtain necessary approvals from authorities having jurisdiction.
2. Comply with UAE Fire & Life Safety Code of Practice including Annexures.
3. Comply with Dubai Civil Defense and Dubai Municipality requirements and
circulars.
B. Installer Qualifications: An employer of workers trained and approved by manufacturer.
C. Source Limitations: Obtain composite wood decking from single source from single
manufacturer.
1.7 DELIVERY, STORAGE, AND HANDLING
A. Deliver composite wood decking crated to provide protection during transit and Project-site
storage. Use vented plastic.
B. Store products on a flat and level surface. Adjust support blocks accordingly.
C. Keep material covered using the provided bundle cover until time of installation
1.8 PROJECT CONDITIONS
A. Field Measurements: Verify actual dimensions of construction contiguous with composite
wood decking by field measurements.
COMPOSITE DECKING 067300 - Page 2 of 4
REV 00
Alamein Downtown Towers
1.9 WARRANTY
A. Special Warranty: Provide complete system manufactures warranty against rot, decay,
splitting, checking, splintering, fungal damage, and termite damage for a period of 10 years
from date of Substantial Completion.
PART 2 - PRODUCTS
2.1 MATERIALS
A. Wood-Plastic Composite Lumber:
1. Composite Decking consisting of recycled Linear Low Density Polyethylene
(LLDPE) and recycled wood. The product is extruded into shapes and sizes as
follows:
a. Decking Boards: 1900 x 140 x 25mm
b. Composition: 60% Hardwood, 35% Plastic and 5% Adhesive.
c. Color/ Finish: brown shade, as selected by the Engineer from manufacturer full
range of colors and finish.
2. Physical properties:
B. Pedestal System:
1. Injection molded pedestals with screwjack mechanism and integrated spacing tabs.
C. Accessories:
1. Fasteners: Manufacturer recommended fasteners.
COMPOSITE DECKING 067300 - Page 3 of 4
REV 00
Alamein Downtown Towers
PART 3 - EXECUTION
3.1 EXAMINATION
A. Examine areas, with Installer present, for compliance with requirements for installation
tolerances and other conditions affecting performance of the Work.
B. Examine floors for suitable conditions where composite wood decking will be installed.
C. Proceed with installation only after unsatisfactory conditions have been corrected.
3.2 INSTALLATION
A. Install composite wood decking according to manufacturer’s installation guidelines.
B. Cut, drill, and rout using carbide tipped blades.
C. Do not use composite wood material for structural applications
3.3 ADJUSTING AND CLEANING
A. Following cleaning recommendations as found in manufacturer installation guide.
END OF SECTION 067300
COMPOSITE DECKING 067300 - Page 4 of 4
REV 00
