SPACE-X “Falcon-9 / Dragon” Print on Cardstock (110 lbs)
1 cm
1 inch
1:100 Scale
O
Insterstage / Falcon-9 First Stage
Falcon-9 / Engine section
Connector
Connector
©2012 Not for commercial use
SPACE-X “Falcon-9 / Dragon” Print on Cardstock (110 lbs)
Rev. Final
1 cm
1 inch
Dragon
1:100 Scale capsule
O capsule
support
glue
heatshield
Curve gray area only
cut thru before gluing capsule
lines in support 1
gray area
capsule
support
capsule
support 1
Heatshield
Trunk support ring
is glued aproximately
5 mm down from the
red line of the trunk
segment
Solar panel
shrouds
Trunk Trunk
support support 1
©2012 Not for commercial use
SPACE-X “Falcon-9 / Dragon” Print on Cardstock (110 lbs)
1 cm Rev. Final
Dragon capsule / 2nd Stage-Interstage
1 inch
1:100 Scale Connector
O
Second Stage / Insterstage
O O
Engine Section
e f g h
g
engine
f
glue
grid
a b
a
ar
ul
x ng
re lue
bo cta
g
h
e
d
c d
©2012 Not for commercial use Engine Grid
SPACE-X “Falcon-9 / Dragon” Print on Cardstock (110 lbs)
1 cm Rev. Final
1 inch
O
1:100 Scale
MERLIN Engines and covers
Umbilical Tray
Do not cut
white space
cut here
©2012 Not for commercial use
SPACE-X “Dragon” Print on Cardstock (110 lbs)
1 cm Rev. Final
1 inch capsule
support
1:100 Scale
capsule
O support 1
Curve gray area only
before gluing
cut thru
lines in cut capsule
gray area support
glue
heatshield capsule
support 1
Heatshield
Trunk support ring
5 mm
is glued aproximately
5 mm down from the
red line of the trunk
segment
L R R
cut out
triangular areas
cut out
triangular areas
L
Trunk
support
Trunk
support 1
©2012 Not for commercial use L R
© 2012
SPACEX “Falcon-9 / Dragon”
Instruction Manual
Falcon-9 paper model schematics 1:100 scale
D Dragon capsule
T Dragon's trunk
1:144 scale
connector
Second stage/
2S/I Interstage
connector
connector
Second stage,
Interstage and
First stage for 1S
1:144 scale model First Stage
connector connector Bottom section
Engine box with grid
Merlin engines
Dragon capsule schematics (both scales)
Top view of Falcon-9
Front capsule hatch
Capsule-trunk
connector
Solar panel
shroud
Solar panel
shroud
Falcon-9 main umbilical tray
NOT TO SCALE
Building the Dragon capsule
There are 2 versions of the
Dragon capsule, one to be
displayed on top of the
Falcon-9 rocket and the
other as in orbital
configuration with open
hatch.
This photo shows the open
hatch capsule.
The assembly for both
versions is the same.
The gray area needs to be
curved before assembling
the capsule. (arrow)
The seamline of the heatshield needs to be centered with
the aft hatch of the Dragon capsule
Dragon capsule with open forward hatch in orbital Simple Dragon capsule version to be displayed
configuration. atop of the Falcon-9 rocket.
Building the capsule trunk
Building the Falcon-9 rocket
This part was deleted from
the final design and was
modified.
Connecting Dragon with the trunk
Building the Solar Panels shrouds
http://www.axmpaperspacescalemodels.com/SpaceX.html
