Data Sheet

100 MHz Digital Storage Oscilloscope

Model 2190E

The 2190E combines performance and value all PC connectivity Features & Benefits
in one portable solution. With 100 MHz ■ 100 MHz, I GSa/s sample rate
bandwidth and 1 GSa/s sample rate, these ■ 800x480 pixel 7” TFT color display
oscilloscopes offer advanced triggering
■ Long waveform memory up to 40,000 points
capabilities, long waveform memory up to 40,000
points, and extensive features such as pass/fail ■ Five different math functions – Add, Subtract,
limit testing, digital filtering, waveform recorder, Multiply, Divide, and FFT
and 32 automatic measurements. ■ Versatile triggering capabilities including pulse
width, line-selectable video, slope, and
Engineered to allow you to see more of your alternating trigger
signal under test, the 2190E widescreen 7” TFT
■ 32 automatic measurements
display offers a significantly larger viewing area
than typical economy oscilloscopes (5.7”). ■ Advanced tools include digital filter with
PC software is provided (free download at B&K adjustable limits, pass/fail testing, and
Maximize productivity with PC connectivity via Precision’s website at [Link]) for waveform recorder mode
LAN, and USB. The downloadable PC software seamless integration between the oscilloscope ■ 12 different language user interfaces and
lets you easily capture, save, and analyze and PC. Capture and transfer waveforms, screen context sensitive help
measurement results. All oscilloscope parameters images, setups and measurement results to a ■ Special EDU mode allows educators to disable
can be controlled via a PC without the need for Windows PC via the USB device port on the
programming. Auto set button, Measure menu, and Cursors
back of the instrument. A USB host port on the
front and rear allows for quick and easy screen menu
The 2190E oscilloscope is ideal for applications saving. ■ Front panel USB host port for saving and
in education, design and debug, service and recalling waveform setups, data, and screen
repair. shots on a USB flash drive
■ LAN and USBTMC-compliant USB device
port for remote PC control
■ GPIB connectivity with optional USB-to-GPIB
adapter

Technical data subject to change [Link]

© B&K Precision Corp. 2017
Digital Storage Oscilloscope
Model 2190E

Front panel

Wavefo rm analysis wi th math

and FFT
Wide scree n display M enu On/Off butto n Analyze your signals with add, subtract,
The 7" widescreen color Configure the menu parameters and multiply, and divide functions. View the
display lets you see more hide the menu with the push of a button signal’s frequency spectrum and perform
of your signal. to view your signal in full screen. harmonic distortion analysis.
Con text sens itiv e he lp
A pop up window will
display the functionality of
a control while help mode
is active.

Auto se tup
Vertical, horizontal,
and trigger controls
are automatically
adjusted for fast signal
display.

Advanced t rig gering

Isolate the signal with
advanced triggering
including pulse width and
selectable video trigger.

USB host port P rin t butto n

Connect your USB flash Simply press the Print
drive to conveniently button to save a
store and recall wave- screenshot in bitmap
form data, setups, and format to a USB flash
screenshots. drive.

Rear panel

Securit y loop
Use the built-in security loop to
secure your instrument to your
location.

Ke nsin gton securit y slot Communi cati on

Helps to secure your LAN, and USB ports enable
oscilloscope and prevent theft. remote control from a PC

2 [Link]
Digital Storage Oscilloscope
Model 2190E

The tools you need

Powerful measurement functions Digital filtering

Filter OFF

Filter ON

Display and measure the input signal’s frequency spectrum. Select Filter out unwanted signal components such as various types of noise
one of the 4 FFT windows: Rectangular, Hanning, Hamming, and with built-in digital filters. Choose from Low-Pass, High-Pass,
Blackman. Use cursors to measure the spectral component’s Band-Pass, and Band-Stop filters.
magnitude and frequency.

Waveform recorder Delayed sweep/zoom

Monitor and analyze long-term signal behavior by recording data Use the oscilloscope’s delayed sweep feature to zoom in a particular
continuously over an extensive period of time and playing it back for area of a signal in real time while viewing the entire captured
post acquisition analysis. Data is recorded in a sequence of up to waveform simultaneously.
2500 frames.

Large internal storage Pass/Fail testing

Minimize debug time by saving and recalling setups and waveforms Generate user-defined pass/fail limits to quickly identify go/no go
from internal memory. Save and recall up to 20 different oscilloscope test results.
setups and 10 different waveforms.

3 [Link]
Digital Storage Oscilloscope
Model 2190E

Model 2190E Hardware Frequency Counter

Performance Characteristics Reading Resolution 1 Hz

Bandwidth 100 MHz Accuracy ±0.01%

Range DC Couple, 10 Hz to 100 MHz

Single Channel: 1 GSa/s
Real Time Sampling Rate
Dual Channel: 500 MSa/s (for timebase faster than 250 ns/div) All trigger signals (except pulse width trigger
Signal Types
and video trigger)
Channels 2
Waveform Math and Measure
Rise time < 3.5 ns
Math operation Add, Subtract, Multiply, Divide, FFT
40,000 points when timebase is 2.5 ns to 50 ns (20,000 points
Record Length for 100 ns to 50 ms timebase), 20,000 points for dual channel Window mode: Hanning, Hamming, Blackman, Rectangular
operation FFT
Sampling points: 1024
Vertical Resolution 8 bit
Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Mean, Crms, Vrms,
Vertical Sensitivity 2 mV/div -10 V/div (1-2-5 order) ROV, FOV, RPRE, FPRE,
Measure FREQ, Period, Rise Time, Fall Time, BWid, + Wid, - Wid,
<±3.0%: 5 mV/div to 10 V/div in fixed gain ranges + Duty, - Duty, Phase, FRR, FRF,
DC Gain Accuracy
<±4.0%: 2 mV/div in variable gain ranges FFR, FFF, LRR, LRF, LFR, LFF
Maximum input voltage 400 V (DC+AC pk-pk, 1 MΩ input impedance, X10), CAT I Display System
2 mV - 200 mV: ±1.6 V Display 7 in. Color TFT, 800 x 480 resolution, 64K color
Position Range
206 mV - 10 V: ±40 V
Display Contrast (Typical state) 150:1
2.5 ns/div - 50 s/div
Horizontal Scan Range
Scan mode: 100 ms/div - 50 s/div (1 - 2.5 - 5 sequence) Backlight Intensity (Typical state) 300 nit

Timebase Accuracy ±50 ppm measured over 1 ms interval Display Area 8 x 18 div

Input Coupling AC, DC, GND Display Mode Dots, Vector

Input Impedance 1 MΩ±2% || 16 pF±3 pF Persistence Off, 1 sec, 2 sec, 5 sec, Infinite

Vertically or horizontally expand or compress a live or Menu Display Timer 2 sec, 5 sec, 10 sec, 20 sec, Infinite
Vertical and Horizontal Zoom
stopped waveform
Off, 1 min, 2 min, 5 min, 10 min, 15 min, 30 min,
Screen-Saver
USB host port on front panel supports USB flash drives, 1 hour, 2 hour, 5 hour
I/O interface LAN, and USB (USBTMC-compliant) device port
Waveform Interpolation Sin(x)/x, Linear
for connection to PC, Pass/Fail output
Display Color Mode Normal, Invert
Acquisition Modes
Environment
Sample Display sample data only
Operating: 50° F to 104 °F (10 °C to 40 °C)
Peak Detect Capture the maximum and minimum values of a signal Temperature
Not operating: -4 °F to 140 °F (-20 °C to 60 °C)
Average Waveform averaged, selectable from 4, 16, 32, 64, 128, 256
Operating: 85% RH, 104 °F (40 °C)
Humidity
Scan Mode For time base settings 0.1 s/div - 50 s/div Not operating: 85% RH, 149 °F (65 °C)
Trigger System Operating: 9,842 ft (3,000 m)
Altitude
Not operating: 50,085 ft (15,266 m)
Edge, Pulse Width, Video*, Slope, Alternating

Trigger Types EMC Directive 2004/108/EC,

Electromagnetic Compatibility
*Support signal Formats: PAL/SECAM, NTSC EN61326:2006
Trigger condition : odd field, even field, all lines, or line number
Safety Low voltage directive 2006/95/EC, EN61010-1:2001
Trigger Modes Auto, Normal, Single
General
Trigger Coupling AC, DC, LF reject, HF reject
AC Input 100-240 VAC, CAT II, 50 VA max, 45 Hz to 440 Hz
Trigger Source CH1, CH2, EXT, EXT/5, AC Line
Dimension (WxHxD) 12.7 x 5.35 x 5.24 inches (323 x 136 x 157 mm)
Trigger Modes: (>,<,=) Positive Pulse Width,
Pulse Width Trigger Weight 5.5 lbs. (2.5 kg)
(>,<,=) Negative Pulse Width
(>,<,=) Positive slope, (>,<,=) Negative slope One-Year Warranty
Slope Trigger
Time: 20 ns -10 s User Manual, 10:1 Probe Set (2 pieces), Power Cord,
Standard Accessories
USB Interface Cable
Optional Accessories USB-to-GPIB adapter (model AK40G)

4 v010917 [Link]