Course : COMPUTER AIDED ENGINEERING DRAWING
Course Code : BCEDK103
Time : 8.30 Am – 11.30 Pm Max. Marks : 100
Date : 28-02-2024 Batch : B4
SCHEME OF EVALUATION
Module -1 Marks
A hexagonal lamina of sides 25mm rests on one of its corners on HP. The corner
opposite to the corner which it rests is 35mm above HP and the diagonal passing
through the corner on which it rests inclined at 30 o to VP. Draw the projections. Find
First Position
the inclination of the surface with HP. Projections
- 08M
Second Position
Projections
Q.01 – 06M
Third Position
Projections
– 06M
Total = 20M
Module-2
A Cube of 30mm sides is resting on one of its corners on HP such that
one of its solid diagonals parallel to HP and also perpendicular to VP.
Draw the projections of the solid.
First Position
Projections
- 08M
Second Position
Projections
Q.02 – 10M
Third Position
Projections
– 12M
Total = 30M
Module-3
A sphere 60mm is placed on the top face of a hexagonal prism side
35mm and height 50mm. draw the isometric projection of the
combination.
Stage -1 Object
- 12M
Stage-2 Object
Q. 03
– 13M
Total = 25M
Module-4
A Square prism of base side 30mm and axis length 60mm is resting on HP on its base
with all the vertical faces being equally inclined to VP. It is cut by an inclined plane
60to HP and perpendicular to VP and is passing through a point on the axis at a
distance 50mm from the base. Draw the development of the lower portion of the
prism. Drawing View
(TV&FV)
- 06M
Section Plane
Location
Q.04 – 04M
Development of
Lateral Surfaces
– 15M
Total = 25M
