Code keypad 3x4
int sensorPin = A0; // select the input pin for the potentiometer
//int ledPin = 13; // select the pin for the LED
int sensorValue = 0; // variable to store the value coming from the sensor
int keyvalue;
void setup()
//pinMode(ledPin, OUTPUT); // declare the ledPin as an OUTPUT:
[Link](9600);
[Link]("Started. Press a key");
void loop()
{printlnkeyvalue(300);}
void printlnkeyvalue(int delay_time)
{
sensorValue = analogRead(sensorPin); // read the value from the sensor:
//digitalWrite(ledPin, HIGH); // turn the ledPin on
switch(sensorValue)
case 0 ... 100: keyvalue = 13; break; // noise
case 101 ... 132: keyvalue = -1; break; // *
case 133 ... 154: keyvalue = 0; break; // 0
case 155 ... 216: keyvalue = -2; break; // #
case 217 ... 281: keyvalue = 7; break; // 7
case 282 ... 318: keyvalue = 4; break; // 4
case 319 ... 349: keyvalue = 1; break; // 1
case 350 ... 390: keyvalue = 8; break; // 8
case 391 ... 463: keyvalue = 5; break; // 5
case 464 ... 519: keyvalue = 2; break; // 2
case 520 ... 619: keyvalue = 9; break; // 9
case 620 ... 848: keyvalue = 6; break; // 6
case 849 ... 1023: keyvalue = 3; break; // 3
if(keyvalue<13) { [Link](keyvalue); delay(delay_time); }
//digitalWrite(ledPin, LOW); // turn the ledPin off:
