Technical details and dimensions of serial machines - other dimensions on request
Model BEU Model HP
HP 45 HP 65/1 HP 65/2 HP 90 HP 120 HP 120/1 HP 150 HP 150/1
Pressing surface [mm] 1800x900 2200x1100 2500x1100 2550x1350 3100x1300 3100x1600 3100x1300 3100x1600
Pressure [kN] 450 650 650 900 1200 1200 1500 1500
Opening [mm] 400 400 400 400 400 400 400 400
Specific pressing
power [kg/cm²] 2,8 2,7 2,4 2,7 3,0 2,4 3,7 3,0
Number of cylinders 4x80 mm 4x80 mm 4x80 mm 4x90 mm 6x80 mm 6x80 mm 6x90 mm 6x90 mm
Operating pressure [bar] 225 325 325 355 398 398 393 393
Golden anodized heating platens
Heating
Dynamic piston bearing
Elec. heating platens [°C] 120 120
120 120 120 120 120 120
Heavy hydraulic aggregate Connected load with two
elec. heating platens [kW] 11,7 14,3 16,7 21,1 27,6 31,4 27,6 31,4
Joos-A.B.S.-Safety-System Heating
Medium heat. platens [°C] 85 / 130 85 / 130 85 / 130 85 / 130 85 / 130 85 / 130 85 / 130 85 / 130
Variable hoist limiting
Weight approx. [kg] 2200 2350 2750 3100 4350 4800 5300 5650
Dimensions approx.
Lenght [mm] 2200 2600 2900 2950 3600 3600 3600 3600
Width [mm] 1100 1300 1300 1600 1550 1850 1550 1850
Height [mm] 1950 1970 2080 2220 2250 2300 2300 2350
Model BEU
BEU 65 BEU 70 BEU 80 BEU 90
Pressing surface [mm] 2500x1100 2500x1250 3100x1300 3100x1600
The four models of this type distinguish them-
Pressure [kN] 650 700 800 900
selves by the technical equipment as well as the
Opening [mm] 400 400 400 400
price that meet the customers‘ basic demands.
Specific pressing
power [kg/cm²] 2,4 2,2 2,0 1,8
The opening of the press Number of cylinders 4x80 mm 4x80 mm 6x80 mm 6x80 mm
is easily adjusted by the Operating pressure [bar] 325 350 265 298
As almost all Joos-Presses, also this model is offe- variable hoist limiting.
red with electric as well as fluid medium heating The hoist limiting is me- Heating
platens. Following modes of heating are available. chanically adjusted at the Elec. heating platens [°C] 90 90 90 90
guide rail. Connected load with two
elec. heating platens [kW] 16,7 18,9 27,6 31,4
Electric heating platens up to 90°C
Heating
Water heating platens up to 85°C including Medium heat. platens [°C] 85 / 120 85 / 120 85 / 120 85 / 120
temperature regulator device with 18 kW
heating output Weight approx. [kg] 2750 2850 4300 4500
Thermic oil heating platens up to 120°C inclu- Dimensions approx.
Lenght [mm] 2900 2900 3600 3600
ding temperature regulator deivce with 18 kW
Width [mm] 1300 1470 1550 1850
heating output Height [mm] 2000 2000 2100 2150
An exact control of the Gottfried Joos Maschinenfabrik GmbH & Co. KG
commands is the prerequi- Lange Strasse 41/ Gottfried-Joos-Strasse
site for smooth veneering.
Therefore, Joos-Quality-
D-72285 Pfalzgrafenweiler
Tel.: +49 (0) 7445 1840
Quality-Press
Products are only provided
with proofed components. Joos Nord
Fax: +49 (0) 7445 18450
Mail:
[email protected] Joos USA INC. HP / BEU
Ron van Dam www.joos.de 680 Madison Avenue
Postbus 128 Manalapan, N.J. 07726
4650 AC Steenbergen USA
NIEDERLANDE Tel.: +1-732 786 0490
Tel.: +49 (0) 7445 18485 Fax: +1-732 786 0491
Mail:
[email protected] Mail:
[email protected] www.joos.de www.joosusa.com
HP /BEU
Temperature control
The standard temperature control is effected by means of a thermostat in the border area of Modes of heating
Joos-Quality-Press HP
the heating platen.
The better solution is the electronic temperature control R 3.1 by Joos in which an electronic
control, that is positioned in the centre of the heating platen, controls the temperature. Addi-
tional to this the heating platen is protected against overheating by a safety thermostat that is Electric- Medium-
heating heating pla-
- Joos-Quality makes the difference positioned in the border area.
Operation of the press platens tens
Joos-Quality-Presses of the model HP are equip-
There are many manufacturers for presses but only a
ped with a swivelling control box. Then the
few that produces good presses. Company Joos, one of
operator can always have an eye on the pressing
the first manufacturers of hydraulic veneer presses for
material even from the long or small side of the
craftsmen, remains true to its principles to build only
press. This is a further idea by Joos for increasing
machines that meet the highest demands on quality.
the operating safety. The classic electric heating by means of resistance wire Sandwich construction. Meander shaped heat control
Joos products fulfil these standards in the production
A Touchpanel with SP-control as central in- system made out of compression-proof and corrosion-
of presses by
terface for operating the press is available as an Temperature up to 120°C; free tubing. Water is mainly used as heat transfer
option. All important pressing parameters such higher temperatures on request medium (thermo oil as alternative).
the quality in processing as pressure, pressing time, etc. as well as the Temperature up to 130°C; higher temperatures on request
dimensions of the parts can be set here. Short heating-up time
the reliability Ideal temperature distribution on the heating platen
Low investment costs
the long life Fast amortization when intensily used
the high ease of operation Heating platens Simple handling Continuous temperature compensation
Independent of the mode of heating,
a matured technique High energy savings capacity
Joos-Quality-Presses are equipped
experience in press building for over 80 years with golden anodized heating platens Energy optimisation with medium heating
decades of know-how as standard. Therefore the heating
platens are extremely resistant to
The temperature is set at the heating platen control.
scratches and abrasion.
The in-house hot water is used as long as its tempera-
When it is about presses it comes to Joos. Con- The significant advantages are: no
ture is high enough. As soon as a higher temperature
vince yourself of the features of good mechanical scoring, reduced consumption of se-
of the water is required the press switches over to the
engineering and ask for solutions by Joos. parating agent, no wear and tear on
external temperature regulator devices.
foil and a higher quality veneering.
Permanent temperature constancy with
All HP models can be equipped with minimum energy consumption!
additional daylight heating platens for
capacity extension.
The dynamic piston bearing Water temperature regu-
On request, the Joos-Quality-Press will
In this unique Joos design the pressing table bears dy- lator device for tempera-
be prepared so that a later extension
namically on the pistons without any screw connections. tures up to 130°C
is possible at low extra costs.
The table is guided by a column guide. A precision too-
thed rack parallel guide system ensures the synchronism.
HP 120 water heated up
This technique provides the pressing table with a full ... made in Germany to 85°C with temperatu-
range for expansion in all directions.
re regulator devices in-
stalled on top of the press
The hydraulic unit
Motor, valves and high-pressure pump are main-
Joos-A.B.S.-Safety-System
tenance-free and mounted securely in the bottom
This system protects the heating platens,
part of the press. We make the same demands to
the machine and the material. Incorrectly
our suppliers as to ourselves - only the best quality
loaded or forgotten parts are registered
is good enough.
immediately by micro sensors and the
Innovative
press opens automatically. Due to this Joos
invention the life and operating safety of
your Joos-Quality-Press will be decisively
increased.
from
tradition!
HP / BEU HP / BEU
