Hidden Camera

1080P Pro 4 in 1 Series

 Contents
1) CAUTIONS
2 ) Product Introduction

2.1 Camera Introduction

2.2 Product Features
3) Menu Setup

4) Product Installation
4.1 General Notes
4.2 Installation Tools and Information
4.3 Setting the Video Output Type
4.4 Installation Method
4.5 Connections
4.6 OSD Control

5) Technical Specification

1
 1 CAUTIONS 6. In order to make the camera work smoothly and
obtain a satisfactory image, the power cord and video
1. To avoid the risk of electric shock, do not open or connection can not be too long. Otherwise, the
maintain the machine by yourself, please consult a increase of line loss will lead to inadequate operating
professional. voltage of the camera or inadequate video signal.

2. To prevent fire or shock, use the power after safety 7. To prevent camera damage and personal injury, do
certification. the input voltage, current, voltage polarity not place camera on unstable objects, brackets,or
and operating temperatures must meet the require- bases.
ments of this camera.
8. Do not place camera near a radiator or other heating
3. Please note the operating temperature and environ- devices.
mental requirements of the camera, avoid too low
or too high temperatures. General operating tempera-
ture range of -10°C ~ +50°C (Fahrenheit temperature
is 14°F ~ 122°F). Avoid flooding and rain, minimize
dust and moisture erosion; otherwise camera would be
damaged.

4. Cameras in use should avoid direct sunlight, glare,

otherwise the sensor will be damaged.

5. Do not touch the sensor surface. If any foreign

objects are visible, use a cotton swab or lens cleaner
to wipe it, if it is difficult to remove, a neutral detergent
diluted with water would be useful. Do not use
corrosive solution.

2 3
 2 Product Introduction 3 Menu Setup
2.1 Camera Introduction AHD/TVI: Click on “Iris+” button from the DVR’s PTZ
interface to call the OSD Menu. Use the PTZ interface
PROVISION-ISR’s new series of cameras have adopted to scroll through the menu and “Iris+” to confirm.
a high performance CMOS image sensor which
provides HD resolution and supports high resolution CVI: Click “ ►” button from the DVR’s PTZ interface,
video output. The cameras support video transmission then click “ ” and press “Enter” to call the OSD Menu.
distance of around 400M base on Rg59 standard coaxial
cable. This series can support AHD/TVI/CVI/CVBS
960H analog output.
4 Product Installation
2.2 Product Features
4.1 General Notes
● Coaxial cable with BNC connector
● DIP Switch 1. Make sure the unit is powered off before installation.
● Auto Day/Night (ICR)
● Auto Defog, HBLC, BLC 2. Check if power supply voltage is consistent with
● Digital WDR, 2D/3D NR electric voltage to prevent damages to the device.
● Motion Detection, Privacy Mask
● AHD/TVI/CVI/CVBS Signal Selectable (by jumper) 3. Do not use in environments exceeding temperature
limitations, and maintain good ventilation to prevent
risk of fire or electric shock.

4. The installation and maintenance of this product

should be professional, please do not in any way
remove or modify the equipment; only use the

4 5
required accessories from the manufacturers. Issues • If you are installing on a cement wall, use the
caused by unauthorized repair are your responsibility. expansion screw holes and then mount the bracket or
base.
4.2 Installation Tools and Information • If you are installing on a wooden wall, use the
self-tapping screws to mount
Prepare the required engineering data and instructions.
Before installing please prepare the following tools and 3. Mounting the camera
instrumentation: A straight or a Phillips-head screwdriver,
multi-meter, scissors, needle nose pliers, tape measure, a. Dome Camera
pencil.
Adjust the lens position to aim at the monitoring points
4.3 Setting the Video Output Type and present a clear picture. Manually fix lens location
and adjust the hemisphere cover. Re-examine the
The camera supports AHD/TVI/CVI/CBVS video output. screen whether the character meets your requirements.
Choosing the output type is done by setting a DIP switch Tighten the hemisphere cover.
on the cable as illustrated:
b. Bullet Camera
ON ON ON ON
Adjust the body so the lens aim at the monitoring points
1 2 1 2 1 2 1 2 and presents a clear picture. Tighten the screws to
AHD HD TVI HD CVI Analog ensure camera will not move.

4.4 Installation Method Installation method above is for reference only.

1. Check if all equipment is in tact. Note:

The wall needs to bear at least 3 times the
2. Mounting bracket or base: weight of bracket and camera.

6 7
 4.5 Connections
Connection as show in the figure below

4.6 OSD Control

The OSD control is available by CoC (Control over

Coax) only. If your AHD/TVI/CVI DVR supports this
function*, use the DVR’s PTZ interface to press on
“Iris+” or “ ” to open the OSD menu.
Navigate through the OSD menu using the PTZ
direction arrows.

* Notice: CoC function works no more than 200M by Rg59 coaxial cable
* All of Provision-ISR’s DVRs support CoC Starting from version 3.4.4

8 9
10 11
 Specifications:
4 in 1 Pro Hidden camera (1080P)

MC-392AHD37+ / DL-392AHD37+ DS-392AHD37+ / IV-390AHD37+

Model MC-392AHD37+ DL-392AHD37+ Model DS-392AHD37+ IV-390AHD37+

Image Sensor 1/3" 2.0MP Sensor Image Sensor 1/3" 2.0MP Sensor
Effective Pixels 1984(H)×1225(V) Effective Pixels 1984(H)×1225(V)
Scanning System Progressive Scanning System Progressive
Resolution Digital:1920×1080P, Analog:960H Resolution Digital:1920×1080P, Analog:960H
Min. Illumination 0.01Lux Min. Illumination 0.01Lux 0Lux (IR On)
Day & Night EXT, Color, B&W, AUTO Day & Night EXT, Color, B&W, AUTO
IR LED N/A N/A IR LED N/A 18pcs(10m)
OSD Menu Available by CoC Only OSD Menu Available by CoC Only
Backlight Compensation OFF/BLC/HSBLC Backlight Compensation OFF/BLC/HSBLC
S/N Ratio ≥60dB (AGC Off) S/N Ratio ≥60dB (AGC Off)
White Balance AWB, ATW, AWC (Push), Indoor, Outdoor, Manual White Balance AWB, ATW, AWC (Push), Indoor, Outdoor, Manual
Noise Reduce 3D-DNR (For Analog HD), 2D-DNR (For Analog) Noise Reduce 3D-DNR (For Analog HD), 2D-DNR (For Analog)
Video Output AHD/TVI/CVI/CVBS (Signal Selectable by DIP switch) Video Output AHD/TVI/CVI/CVBS (Signal Selectable by DIP switch)
Defog Off/On Defog Off/On
Privacy Mask Off/On (4 Areas) Privacy Mask Off/On (4 Areas)
Motion Detection Off/On (4 Areas) Motion Detection Off/On (4 Areas)
D-Effect Freeze, Mirror, Negative Image D-Effect Freeze, Mirror, Negative Image
Lens 3.7mm Pinhole Lens 3.7mm Pinhole
Power DC12V±10%, ~72mA Power DC12V±10%, ~72mA DC12V±10%, ~212mA
Operation temp. -10°C~+50°C (14°F~122°F) Operation temp. -10°C~+50°C (14°F~122°F)
Dimension 35*35*10mm Ø90*55mm Dimension Ø125x50mm 104*60*66mm
Net Weight 90g 210g Net Weight 85g 94g

12 13