BVRIT HYDERABAD

College of Engineering for Women

Bachupally, Hyderabad –500090
Department of Electrical & Electronics Engineering
Lesson Plan

Course Code: EE402PC Course Title: EM- II

Class: II Year – II Sem, EEE Academic Year: 2020-21
Instructor: M Sandeep Kumar Designation: Assistant Professor
Unit-I Polyphase Induction Motors: Constructional details of cage and wound rotor machines production of a rotating
magnetic field - principle of operation – rotor emf and rotor frequency - rotor reactance, rotor current and Power factor at standstill
and during operation.

Text COs
Chapter No.
S.No. Date Topic Proposed to be Covered /Reference Web Resources Achiev
& Page No.
Book ed
1 22.03.2021 Introduction T2 Ch6:703
2 23.03.2021 Constructional details of squirrel cage T2 Ch6: 703-705 C223.1
rotor. https://www.electri
cal4u.com/construct
3 23.03.2021 Constructional details of slip ring wound T4 Ch34: 1245 ion-of-three-phase- C223.1
rotor. induction-motor/
4 25.03.2021 Production of a rotating magnetic field T4 Ch34: 1248 C223.1

5 26.03.2021 Principle of operation of induction motor T4 Ch34: 1249 C223.1

6 27.03.2021 rotor emf and rotor frequency T2 Ch6:711 http://machineryequ C223.1

ipmentonline.com/e
7 27.03.2021 rotor reactance, rotor impedance at T2 Ch6: 712-713 lectric- C223.1
standstill equipment/inductio
8 27.03.2021 Rotor current and Power factor at T2 Ch6: 714-715 n-motorrotor-e-m-f- C223.1
standstill. and-reactance-
under-running-
9 30.03.2021 rotor reactance, rotor current during T2 Ch6: 715-716 conditions/ C223.1
running condition
10 30.03.2021 Power factor during running operation T2 Ch6: 716-718 C223.1

11 01.04.2021 Problems
03.04.2021
12 06.04.2021 Previous Question papers

UNIT – II: Characteristics of Induction Motors: Rotor power input, rotor copper loss and mechanical power developed and their
inter relation-torque equation-deduction from torque equation -expressions for maximum torque and starting torque - torque slip
characteristic – equivalent circuit - phasor diagram - crawling and cogging -.No-load Test and Blocked rotor test –Predetermination
of performance-Methods of starting and starting current and Torque calculations.
Speed Control Methods: Change of voltage, change of frequency, voltage/frequency, injection of an emf into rotor circuit
qualitative treatment only)-induction generator principle of operation.

13 08.04.2021 Rotor power input, rotor copper loss Ch34: 716- C223.2
T4 718 https://nptel.ac.in/c
ourses/108105053.
14 08.04.2021 mechanical power developed T4 C223.2
 15 09.04.2021 inter relation-torque equation T4 Ch34: 1256 C223.2

16 12.04.2021 Torque equation-deduction from torque Ch34: 1257-

equation T4 1258
https://nptel.ac.in/c
ourses/108105053/
pdf/
17 12.04.2021 Expressions for maximum torque T4 Ch34: 1257- C223.2
1258

18 15.04.2021 Expressions for starting torque R4 Ch34: 1257- C223.2

1258
19 15.04.2021 Torque slip characteristic T4 Ch34: 1264 C223.2

20 16.04.2021 Equivalent circuit of induction motor T4 https://nptel.ac.in/c C223.2

Ch6: 1345
ourses/108106072
21 17.04.2021 Phasor diagram at different condition T4 C223.2

22 19.04.2021 crawling and cogging T4 Ch6: 1342 https://www.electri C223.2

caleasy.com/2014/0
2/crawling-and-
cogging-in-
induction-motor
23 20.04.2021 No-load Test and Blocked rotor test T4 Ch35: 1315- C223.2
1316
24 22.04.2021 Predetermination of performance T4 Ch35: 1316- C223.2
23.04.2021 1317
24.04.2021
26.04.2021
25 27.04.2021 Methods of starting of induction motor T4 Ch6: 791-792 C223.3
29.04.2021
26 30.04.2021 Starting current and Torque calculations. T4 Ch6: 791-792 C223.2

27 01.05.2021 Speed control methods T4 Ch6: 1349 https://nptel.ac.in/c C223.2

03.05.2021 ourses/108106072

28 03.05.2021 . T3 Ch7: 375 C223.2

Change of voltage, change of frequency
29 03.05.2021 voltage/frequency, injection of an emf T3 Ch7: 376 C223.2
into rotor circuit
30 04.05.2021 Induction generator principle of operation T3 Ch7: 377 C223.2

31 06.05.2021 Problems
07.05.2021
UNIT – III: Construction, Principle of operation, Characteristics & Regulation of Synchronous
Generator: Constructional Features of round rotor and salient pole machines – Armature windings – Integral slot and fractional slot
windings; Distributed and concentrated windings –distribution, pitch and winding factors – E.M.F Equation.
Harmonics in generated e.m.f. – suppression of harmonics – armature reaction – leakage reactance – synchronous reactance and
impedance – experimental determination - phasordiagram – load characteristics.
Regulation by synchronous impedance method, M.M.F. method, Z.P.F. method and A.S.A.methods – salient pole alternators – two
reaction analysis – experimental determination of Xd and Xq (Slip test) Phasor diagrams – Regulation of salient pole alternators.

32 10.05.2021 Constructional Features of round rotor T3 Ch3: 191-194 C223.1

and salient pole machines
33 11.05.2021 T3 Ch3: 199 C223.1
Types of Armature windings
34 11.05.2021 Integral slot and fractional slot windings T3 Ch3: 200-204 C223.1
 Distributed and concentrated windings

35 13.05.2021 T3 Ch3: 208 C223.1

E.M.F Equation of an alternator
36 07.06.2021 Harmonics in generated e.m.f. T3 Ch3: 215 https://nptel.ac.in/cour C223.5
Suppression of harmonics ses/112103024/modul
e14/lec1/3.html
37 08.06.2021 Armature reaction – leakage reactance, T3 Ch3: 217-218 C223.5
synchronous reactance and impedance
38 10.06.2021 Regulation by synchronous impedance T3 Ch3: 224-225 C223.4
11.06.2021 method, M.M.F. method,
39 14.06.2021 Z.P.F. method and A.S.A.methods T3 Ch3: 225-226 C223.4
15.06.2021
40 17.06.2021 Two reaction analysis – experimental T3 Ch3: 239-240 https://www.youtub C223.4
determination of Xd and Xq (Slip test). e.com/watch?v=p9
RbONWjnb8
41 18.06.2021 Phasor diagrams – Regulation of salient T3 Ch3: 241-242 C223.4
pole alternators

42 19.06.2021 Problems

UNIT –IV Parallel Operation of Synchronous Generator: Synchronizing alternators with infinite busbars – synchronizing power
torque – parallel operation and load sharing - Effect of change of excitation and mechanical power input. Analysis of short circuit
current wave form –determination of sub-transient, transient and steady state reactances.
Synchronous Motors – Principle of Operation: Theory of operation – phasor diagram –Variation of current and power factor with
excitation – synchronous condenser –Mathematical analysis for power developed .- hunting and its suppression – Methods of
starting – synchronous induction motor.

43 21.06.2021 Synchronizing alternators with infinite T3 Ch6: 324-325 https://www.sciente C223.5

busbars chworld.com

44 22.06.2021 synchronizing power , synchronizing T3 Ch6: 330 C223.5

torque
45 24.06.2021 parallel operation and load sharing T3 Ch6: 335 https://www.electri C223.5
cal4u.com/parallel-
operation-of-
alternator
46 25.06.2021 T3 Ch6: 332 C223.5
Effect of change of excitation and
26.06.2021
mechanical power input
28.06.2021
47 29.06.2021 Analysis of short circuit current wave T3 Ch6: 333 C223.5
form
48 29.06.2021 Determination of sub-transient, transient T3 Ch6: 334 C223.5
and steady state reactances.

49 01.07.2021 T3 Ch5: 273 https://nptel.ac.in/c C223.5

Principle operation of synchronous motor
ourses/108106072
50 02.07.2021 phasor diagram –Variation of current and T3 Ch5: 278 C223.5
03.07.2021 power factor with excitation
05.07.2021
51 06.07.2021 synchronous condenser- Mathematical T3 Ch5: 308 C223.5
analysis for power developed
52 08.07.2021 hunting and its suppression T3 Ch5: 312 C223.5

53 09.07.2021 Methods of starting – synchronous T3 Ch5: 313-314 https://nptel.ac.in/c C223.3

12.07.2021 induction motor. ourses/108106072
13.07.2021
UNIT V – Single Phase Motors & Special Motors: Single phase induction motor – Constructional features-Double
revolving field theory – split-phase motors – shaded pole motor.

54 15.07.2021 R4 Ch16:364 https://www.electri C223.6

Single phase induction motor
cal4u.com/single-
55 16.07.2021 R4 Ch16:364 phase-induction- C223.6
Constructional features motor/
56 17.07.2021 R4 Ch16:365 C223.6
19.07.2021 Double revolving field theory.
20.07.2021
57 22.07.2021 R4 Ch16:366 https://circuitglobe. C223.6
split-phase motors
com/working-
58 23.07.2021 R4 Ch16:369 principle-of-single- C223.6
24.07.2021 shaded pole motor . phase-induction-
26.07.2021 motor.html
59 27.07.2021 C223.6
Revision of previous question papers.
29.07.2021

TEXT BOOKS:
1. “I. J. Nagrath& D. P. Kothari”, “Electric Machines”, Tata McGraw Hill, 7thEdition, 2009
2. “PS Bhimbra”, “Electrical machines”, Khanna Publishers, 2014
3“J.B. Gupta”, “Electrical machines”, Publisher: S.K. Kataria& Sons; 2013
4. “B.L Theraja& A.K Theraja”, “ A.C& D.C Machines” S.Chand,Volume-II

REFERENCE BOOKS:
1. “M. G. Say”, “Performance and Design of AC Machines”, CBS Publishers, 3rdEdition, 2002.
2. “A.E. Fitzgerald, C. Kingsley and S. Umans”, “Electric machinery”, McGrawHillCompanies, 7th edition, 2013
3. “Langsdorf”, “Theory of Alternating Current Machinery”, Tata McGraw-HillCompanies, 2nd edition, 1984.
4. “M.V Deshpande”, “Electrical Machines”, PrintceHallIndia, 2013

Course Outcomes:
C222.1 Illustrate the construction and working principle of Induction & Synchronous Machines.
C222.2 Assess the performance and speed control of a poly phase induction motor.
C222.3 Illustrate different starting methods of Induction & Synchronous motors.
C222.4 Evaluate the voltage regulation of Alternators using different methods
C222.5 Evaluate the performance of synchronous generators for parallel operation and load sharing.
C222.6 Assess the single phase motors for different applications

Signature of Faculty HOD