Python Ant Downloader

Experimental tools for extracting data from Garmin wireless (ANT) GPS devices. The project goal is to be complete Linux replacement for "Garmin ANT Agent" availible only on Windows/Mac. The feature set is pretty close already, but supported hardware may need work.

This software implements the Garmin Device Interface Spec over an ANT-FS transport. In theory it should work with any device implementing this stack, but spefications were incomplete or out-of-date in some areas. Don't give up if it doesn't work on your device, only minor changes may be required. Please help by reporting results.

The software can be run as either a daemon or on-demand. In deamon mode it automatically saves TCX files to a configured directory whenever a paired devices is within range and has new data. In on-demand mode the program just downloads once and terminates. The software also supports automatic upload to Garmin Connect.

Getting Help

Discussion Forum: http://groups.google.com/group/linux-ant-agent-users

Issues Tracker: https://github.com/braiden/python-ant-downloader/issues

Supported Devices

So far this software has only been tested with a Garmin 405CX using USB2 Wireless ANT Stick (FCC ID 06RUSB2). It seems to work perfectly, even better than the window agent, but there are probably bugs. I will try to update this section if I here reports of success / failure.

405CX
410
910XT (reporting working, but swims are not downloaded)

Unsupported Devices

610
310

These devices (and probably anything newer) appear to implement ANT-FS instead of "Garmin Device Interface API". You can try this: https://github.com/Tigge/Garmin-Forerunner-610-Extractor. If you are capable of implementing support for ANT-FS devices, let me know how I can help. The two interfaces re-use a large part of the protocol stack.

Installing

Easy Install (stable)

Make sure your system has python, setuptools, and libusb-1.0:

sudo apt-get install python python-setuptools libusb-1.0-0

You may also want to install python-lxml. If you skip this step easy_install will need to build from source:

sudo apt-get install python-lxml

Once prerequisites are installed you can install python-ant-downloader from PyPi:

sudo easy_install python-ant-downloader

You can also upgrade a previous installation:

sudo easy_install --upgrade python-ant-downloader

Manual Install (stable/unstable)

You can either clone the git project:

git clone git://github.com/braiden/python-ant-downloader.git

Or download a stable build from PyPi or Github tags

You can install by running:

./setup.py install

Or, run directly from the directory. If you choose not to run ./setup.py, you will have to manually verify prerequisites are installed.

Prerequisites

Python 2.6+
pyusb 1.0 - latest version from github is recommended. 0.4 will not work.
poster - only if you enable upload to garmin connect
argparse - if < python 2.7
lxml
setuptools

On Ubuntu most of these dependencies can be satisfied with:

apt-get install python python-argparse python-lxml python-setuptools

But, you will still need to download pyusb and poster from github or PyPi.

Running

$ ant-downloader --help

usage: ant-downloader [-h] [--config f] [--daemon] [--verbose]
optional arguments:
  -h, --help        show this help message and exit
  --config f, -c f  use provided configuration, defaults ~/.antd/antd.cfg,
  --daemon, -d      run in continuous search mode downloading data from any
                    availible devices, WILL NOT PAIR WITH NEW DEVICES
  --verbose, -v     enable all debugging output, NOISY: see config file to
                    selectively enable loggers

First Time

Make sure you have permission to access the USB device. Add a text file with one of the following to /etc/udev/rules.d/99-garmin.rules.

On Ubuntu 10.04 (or other other older distros):

SUBSYSTEM=="usb", SYSFS{idVendor}=="0fcf", SYSFS{idProduct}=="1008", MODE="666"

On Ubuntu 12.04 (or other distros running newer udev):

SUBSYSTEM=="usb", ATTR{idVendor}=="0fcf", ATTR{idProduct}=="1008", MODE="666"

The first time you run the program it will need to pair with your GPS device. Make sure the the GPS unit is awake (press a button), and make sure pairing is enabled. Then just run ant-downloader. When prompted accept the pairing request on your GPS device. Once request is accepted a key is saved and you should not need to pair again.

You may also choose to enable "Force Downloads" on your device. This will cause all old data to be downloaded. WARNING, It will also upload all data to Garmin Connect.

Configuration

See antd.cfg from configuration options including where files are saved, and Garmin Connect login details. The file will be created in ~/.antd the first time you run the program.

License

superm1/python-ant-downloader

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages